272 results on '"Kashyap, B.P."'
Search Results
2. Identification of favorable hot working condition for Ti-6 Al-4V
3. Micro-Mechanism Relations Between Deformation and Damage Behavior of Materials at Elevated Temperature
4. An evidence of pseudo-elasticity in a caliber rolled Ti[sbnd]6Al[sbnd]4V alloy and its effect on tension-compression flow asymmetry
5. Effect of radial hydride fraction on fracture toughness of CWSR Zr-2.5%Nb pressure tube material between ambient and 300 °C temperatures
6. Effect of stored strain energy heterogeneity on microstructure evolution of 90% cold rolled AISI 304L stainless steel during interrupted annealing treatment
7. Effects of concurrent strain induced martensite formation on tensile and texture properties of 304L stainless steel of varying grain size distribution
8. Optimum shape and orientation of δ-hydride precipitate in α-zirconium matrix for different temperatures
9. On the microstructure evolution in friction stir processed 2507 super duplex stainless steel and its effect on tensile behaviour at ambient and elevated temperatures
10. Strengthening of Thin Sheet Metals for Advanced Structural Applications by Various Notch Wavy Rolling Techniques
11. Influence of hydride orientation on fracture toughness of CWSR Zr-2.5%Nb pressure tube material between RT and 300 °C
12. Effect of hydrogen on high temperature flow behavior of near α-Ti alloy
13. Development of constitutive relationship and processing map for Al-6.65Si-0.44Mg alloy and its composite with B4C particulates
14. Dynamic strain ageing in fine grained Cu-1 wt%Al2O3 composite processed by two step ball milling and spark plasma sintering
15. Grain growth in calibre rolled Mg–3Al–1Zn alloy and its effect on hardness
16. Modelling compaction behaviour of nickel–phosphorus and nickel–boron electroless coated titanium powders
17. Ultrafine grained microstructure tailoring in austenitic stainless steel for enhanced plasticity
18. Microstructure refinement and its effect on specific strength and bio-corrosion resistance in ultralight Mg–4Li–1Ca (LC41) alloy by hot rolling
19. Correlation between microstructural features and creep strain in a near-α titanium alloy processed in the α+β regime
20. Microstructural evolution in and flow properties of Zr–2.5Nb pressure tube material at elevated temperature
21. Effect of multipass friction stir processing on corrosion resistance of hypereutectic Al–30Si alloy
22. Hot working and geometric dynamic recrystallisation behaviour of a near-α titanium alloy with acicular microstructure
23. Microstructure and properties of hot extruded Cu–1 wt% Al2O3 nano-composites synthesized by various techniques
24. Enhancement of Flow Properties by Grain Refinement and other Structural Modification
25. Modeling the hot working behavior of near-α titanium alloy IMI 834
26. Effects of caliber rolling on microstructure and room temperature tensile properties of Mg–3Al–1Zn alloy
27. Microstructural evolution during reactive brazing of alumina to Inconel 600 using Ag-based alloy
28. Kinetics of dynamic recrystallization in Ti-modified 15Cr–15Ni–2Mo austenitic stainless steel
29. Effect of Concurrent Microstructure Evolution and Hydrogen Level On Flow Behavior of Near Alpha Ti-Alloy
30. Stability of microstructure and its evolution during solid-state annealing of [formula omitted]–Inconel 600 brazed couples
31. Processing map for hot working of spray formed and hot isostatically pressed Al–Li alloy (UL40)
32. On the validity of Hall–Petch equation for single-phase β Ti–Al–Nb alloys undergoing stress-induced martensitic transformation
33. Fretting wear study on Ti–Ca–P biocomposite in dry and simulated body fluid
34. Influence of volume fraction of primary α 2 on the fracture toughness of Ti–Al–Nb alloy undergoing stress-induced martensitic transformation
35. Effect of Al and Nb on the trigger stress for stress-induced martensitic transformation during tensile loading in Ti–Al–Nb alloys
36. The effect of grain size and composition on the fracture toughness of Ti–Al–Nb alloys undergoing stress-induced martensitic transformation
37. T-shaped equi-channel angular pressing of Pb–Sn eutectic and its tensile properties
38. Plastic Flow Properties and Microstructural Evolution in an Ultrafine-Grained Al-Mg-Si Alloy at Elevated Temperatures
39. On the Influence of Alloy Composition on the Fracture Toughness of Two-Phase Ti-Al-Nb Alloys Undergoing Stress-Induced Martensitic Transformation
40. Effect of Volume Fraction of Primary α 2 on the Trigger Stress for Stress-Induced Martensitic Transformation in Two-Phase Ti-Al-Nb Alloys
41. Trigger Stress for Stress-Induced Martensitic Transformation during Tensile Deformation in Ti-Al-Nb Alloys: Effect of Grain Size
42. Effect of layered microstructure on superplastic forming property of AA8090 Al–Li alloy
43. Various stages in stress–strain curve of Ti–Al–Nb alloys undergoing SIMT
44. The effect of prior annealing on high temperature flow properties of and microstructural evolution in SPF grade IN718 superalloy
45. Flow behaviour of a modified Zr–2.5wt%Nb pressure tube alloy
46. On the hot working characteristics of 2014 Al–20 vol% Al 2O 3 metal matrix composite
47. Identification of flow instabilities in the processing maps of AISI 304 stainless steel
48. Improved ductile fracture criterion for cold forming of spheroidised steel
49. Stress-reorientation of hydrides and hydride embrittlement of Zr–2.5 wt% Nb pressure tube alloy
50. Effect of local strain distribution on concurrent microstructural evolution during superplastic deformation of Al–Li 8090 alloy
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.