217 results on '"Kashyap, B. P."'
Search Results
2. Effects of Remelting on Variations in Composition, Microstructure, and Hardness Property of Binary Al-Si Alloys
3. Towards Interrelating the Nature of High Temperature Stress–Strain Curves and Creep Curves with Concomitant Microstructure Evolution
4. Compressive Flow Behavior and Microstructural Evolution of Friction Stir Processed A356-5% B4C Composite
5. Friction Stir Processing of 2507 Super Duplex Stainless Steel: Microstructure and Corrosion Behaviour
6. Investigation of Process Parameters for Friction Stir Processing (FSP) of Ti-6Al-4V Alloy
7. Effects of Temporary Alloying and Severe Plastic Deformation on Microstructure Evolution and Mechanical Properties of Ti-Alloys: A Comparative Study
8. Effect of Strain Rate and Temperature on the Tensile Flow Behavior and Microstructure Evolution in Fe-0.3 Pct C-CrMoV Grade Steel
9. Effect of Concurrent Microstructure Evolution and Hydrogen Level on Flow Behavior of Near Alpha Ti-Alloy
10. Tension–Compression Flow Asymmetry as a Function of Alloy Composition in the Al-Si System
11. Innovative cost-effective method to repair lacrimal cannaliculi laceration – finding proximal end and stent
12. Grain boundary and grain interior strengthening in nano-micron grain sized Cu-1wt.%Al2O3 composite
13. Taguchi Based Optimisation of Artificial Neural Network to Establish a Direct Microstructure: Mechanical Property Correlation in a near-α Titanium Alloy
14. Effects of Remelting on Variations in Composition, Microstructure, and Hardness Property of Binary Al-Si Alloys
15. Grain boundary and grain interior strengthening in nano-micron grain sized Cu-1wt.%Al2O3 composite.
16. Overview: Experimental Constitutive Relationship for High Temperature Deformation and the Effect of Concurrent Microstructure Evolution
17. Estimation of Creep Failure Life of Rotor Grade Steel by Using Time–Temperature Parametric Methods
18. Microstructure and Texture Evolution During Annealing of Caliber Rolled Mg–3Al–1Zn Alloy
19. Biocorrosion and biodegradation behavior of ultralight Mg–4Li–1Ca (LC41) alloy in simulated body fluid for degradable implant applications
20. Processing map for a cast and homogenized near alpha titanium alloy
21. Successful repair of injury to the eyelid, lacrimal passage, and extraocular muscle
22. Hot Workability and Flow Characteristics of Aluminum-5 wt.% B4C Composite
23. Grain Growth and β-Mg17Al12 Intermetallic Phase Dissolution During Heat Treatment and Its Impact on Deformation Behavior of AZ80 Mg-Alloy
24. Towards Interrelating the Nature of High Temperature Stress–Strain Curves and Creep Curves with Concomitant Microstructure Evolution
25. Dynamic Recrystallization during Hot Deformation of 304 Austenitic Stainless Steel
26. Recrystallization Phenomena During Friction Stir Processing of Hypereutectic Aluminum-Silicon Alloy
27. X-ray diffraction line profile analysis for defect study in Zr-2.5% Nb material
28. Compressive Properties of Al-B4C Composites over the Temperature Range of 25 - 500°C
29. Microstructure and yield behavior of a high aluminum containing Ti-Al-Nb alloy
30. Measurement of fracture properties of Zr-2.5 Wt.% Nb pressure tube material and effect of trace impurities
31. Processing maps for hot deformation of α2 aluminide alloy Ti-24Al-11Nb
32. Microstructural instability and superplasticity in a Zr-2.5 Wt Pct Nb pressure-tube alloy
33. Insight into the microstructural characterization of ferritic steels using micromagnetic parameters
34. Effect of prior cold rolling and test temperature on stress-strain rate behaviour of a Zr-2.5Nb alloy
35. Effect of dynamic strain ageing on the tensile properties of a modified 9Cr–1Mo steel
36. Deformation behavior of an Al-3.37 Wt Pct Li alloy
37. Queue lengths in the GIX/MR/∞ service system
38. Grain growth in the two-phase Al-Cu alloys
39. On the relationship between the intrinsic hot workability parameters of DMM and PRM
40. Processing maps for hot deformation of α2 aluminide alloy Ti-24Al-11Nb
41. Correlation between Microstructural Features and Tensile Properties in Near-α Titanium Alloy IMI 834 Processed in the α + β Regime
42. Treatment of Concurrent Microstructure Evolution and Deviation from Steady-State Flow in Constitutive Relationship for Superplastic Deformation
43. On the Hot Workability of ELI Grade Titanium Alloy Ti–6Al–4V
44. Multipass-friction Stir Processing (MFSP) of Ti-6Al-4V Alloy and Investigation of Flow Properties
45. Effect of Strain Rate and Temperature on the Tensile Flow Behavior and Microstructure Evolution in Fe-0.3 Pct C-CrMoV Grade Steel
46. Understanding the concurrent microstructural evolution and its impact on superplastic characteristics: an overview
47. Effect of Solid Die Equi-Channel Pressing Angle on β-Mg17Al12 Phase Morphology and Mechanical Behavior of AZ80 Mg alloy
48. On the High Temperature Deformation Behaviour of 2507 Super Duplex Stainless Steel
49. Effect of Multipass Friction Stir Processing on Mechanical and Corrosion Behavior of 2507 Super Duplex Stainless Steel
50. Grain growth behaviour of an α/β brass
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.