Search

In this research, the dietary fibers (DFs) from ginseng residue were extracted by employing three different extraction methods (alkaline: AL, acidic: AC, enzymatic: EN). The extracted DFs were characterized in terms of their structural and functional properties. The results clearly showed that, regardless of the extraction methods, all DF samples exhibited representative infrared spectral features. The DF extracted by AC (citric acid) had more porous structures with a looser configuration, in conjunction with high apparent viscosity, whereas the DF extracted by EN (α-amylase and protease) exhibited higher thermal stability. Moreover, the monosaccharide composition of the DF samples was significantly influenced by the extraction method type. The DF from ginseng residue extracted by AC had the highest functional properties, such as water holding capacity (8.16 g/g), oil holding capacity (3.99 g/g), water swelling capacity (8.13 g/g), cholesterol-absorption capacity (12.85 mg/g), bile acid absorption capacity (91.51 mg/g), nitrite ion absorption capacity (124.38 ug/g at pH 2.0), glucose absorption capacity (52.67 mg/g at 150 mmol/L), as compared to those of DF extracted by the EN and AL (sodium hydroxide) methods. Hence, ginseng residue-derived DF extracted by the AC method may be potentially employed in the preparation of functional food ingredients.

This study evaluates the structural, physicochemical, functional and rheological properties of papaya dietary fibers (DFs) extracted by alkaline, water and combination of water/wet ball milling. The particle size of DF subjected to water/wet ball milling (WB-DF) was considerably reduced compared to DF extracted by water (W-DF) or alkaline (AL-DF) methods. WB-DF in comparison AL-DF increased the water holding capacity (WHC) by 4.1 folds, oil holding capacity (OHC) by 1.7 folds and water swelling capacity (WSC) by 2.6 folds. WB-DF also improved the cholesterol adsorption capacity (CAC), glucose adsorption (GAC), nitrite-ion adsorption capacity (NIAC) and antioxidant activity. The FT-IR spectra displayed changes in peak intensities observed in the three modified DFs. In addition, WB-DF showed highest viscosity among all smaples. The distributions of monosaccharides in the DFs were affected by the different extractions. Consequently, DFs extracted through the water/wet ball milling exhibit significant potential for applications in the functional food industry.

ABSTRACTThe main problem on a global scale is the demand for functional foods among consumers in terms of healthy diets and wellbeing. In this context, high-pressure homogenization (HPH) is a new technology with a variety of potential uses in the food industry, such as the modification of food biopolymer structures to direct their functionalities, the creation of nanoemulsions, the inactivation of microorganisms and enzymes, and the disruption of cells for the extraction of intracellular components. Furthermore, new opportunities for homogenization processing have been opened up by recent developments in high-pressure homogenization technology. This has made it possible to produce novel products that can be recognized from traditional ones by sensory, structural, or functional attributes. The fact that the product experienced heavy mechanical stresses during the process, such as cavitation and shear forces, is the cause of all these consequences. It has been suggested that HPH may have a role in the creation of functional probiotic dairy products and other beverages with enhanced sensory qualities in the functional food industry. Additionally, it has been demonstrated that HPH can change the volatile-molecule profiles of milk and beverages, increase specific cellular enzymatic activities, inhibit microbial growth, strengthen the probiotic properties of bacterial strains, extend shelf-life through microbial inactivation, and extend shelf-life with minimal effects on nutritional value and sensory qualities. Therefore, this review compiles and summarizes the workings, benefits, and applications of HPH in the food industry.

This study aimed to characterize dietary fibers (DF) produced from papaya peel (PP) and seed (PS) using three different extraction methods (acidic: AC, enzymatic: EN and alkaline: AL). The scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), thermal and rheological properties, X-ray diffraction (XRD), monosaccharide composition were adopted for characterizing DF samples. All the DF samples showed representative infrared spectral features and crystalline structure, whereas DF derived from PP and PS extracted by AC had looser and more complicated structures. DF derived from PP and PS extracted by EN displayed greater thermal stability among DFs. DF extracted by PP-AC and PS-EN showed a high degree of linearity in rheograms as compared to other DF samples. In addition, the extraction method also influenced the monosaccharide composition in PP and PS DFs samples. Furthermore, AC-extracted DFs, specifically PP-AC and PS-AC exhibited higher functional (water-holding capacity (WHC), oil-holding capacity (OHC), water swelling capacity (WSC), cholesterol-absorption capacity (CAC), bile acid absorption capacity (BAC), nitrite ion absorption capacity (NIAC), glucose absorption capacity (GAC)) and antioxidant properties (DPPH, ABTS and FRAP). Our results suggest that the PP and PS derived DF samples could potentially be used as functional food ingredient.

Consumer demand for higher-quality fruit juices has resulted in the development of non-thermal processing to extend the shelf life of fruit juices. Ozonation is a novel technique, involving the production of volatile oxygen atoms capable of destroying an extensive range of microorganisms and lengthening the shelf stability of fruit juices. The purpose of this research was to examine the influence of ozonation on the physicochemical, bioactive components, and microbial properties of kinnow juice. Kinnow juice was exposed to ozone gas with fixed concentration 150 mg/h for 5, 10, and 15 minutes. Then, kinnow juice was filled in a plastic bottle and kept at 4 ± 2°C for 3 months. The mentioned parameters were examined after 30 days, 60 days, and 90 days. It was found that ozonation had shown a significant influence on nutritional characteristics of kinnow juice as it increased (p ≤ .05) the acidity, total soluble content, total phenolics content, flavonoids content, and antioxidant potential of kinnow juice and diminished the microbial activity, increasing ozone time from 5 to 15 minutes. OZ-15 (15 minutes of ozonation) showed the maximum value of total soluble content (14.70 ± 0.10 °Brix), titrable acidity (0.179 ± 0.10%), total flavonoid content (244.44 ± 3.70 mg equivalent of catechin/100 mL), and total antioxidant activity (305.95 ± 2.70 µg/g equivalent of ascorbic acid of juice), but it presented the least total mold counts (1.49 ± 0.02 colony forming unit/mL) and plate counts (1.53 ± 0.03 colony forming unit/mL). It was suggested that the ozonation could be used as an alternative to the traditional pasteurization and chemical preservatives on kinnow juice to retain quality characteristics.

The present study was conducted to evaluate the effect of ultrasound on the functional properties of citrus juices. Citrus fruits and juices were analyzed for physico-chemical properties. The ‘Pamelo’ excelled in terms of average fruit weight (451.83 ± 7.1 g), fruit volume (543.33 ± 9.1 cm3) and rag percentage (68.64 ± 1.1%). ‘Valencia late’ (48.67 ± 0.3%), ‘Flame’ (48.38 ± 1.3%) and ‘Kinnow’ (35.95 ± 4.9%) were good in juice %. The juice was subjected to sonication treatment at 15°C for 5 min keeping pulse duration 5 s on and 5 s off (70% amplitude level and 20 kHz frequency). Total phenol, flavonoids, free radical scavenging activity, antioxidant capacity, and reducing power increased in fruit juices as a result of sonication. The total phenolic contents in the juices of all citrus cultivars ranged from 223.49 ± 4.5 to 590.47 ± 5.5 µg gallic acid equivalent/g and increased from 315.18 ± 6.1 to 645.44 ± 7.1 µg GAE/g after ultrasonic processing. The DPPH values of juices of all citrus cultivars ranged from 791.54 to 1251.93 µmol equivalent of trolox/mL and increased from 1001.54 to 1336.77 µmol equivalent of trolox/mL after applying ultrasound. The sonication is highly feasible for practical use in the industry for the production of citrus fruit juices with improved quality in terms of nutrients.

Moringa (Moringa oleifera) has excellent nutritional significance as well as medicinal and therapeutic benefits, such as antidiabetic, anticancer, antimicrobial, and antioxidant activities. Whole wheat flour (WWF) is associated with a reduced risk of cancer (colon cancer), constipation, obesity, cardiovascular diseases, and type 2 diabetes. In this regard, the objective of the study is to determine the chemical composition, nutritional value, and antioxidant activity of moringa leaves and their MLP containing snack food (bread) to make a strong recommendation for their consumption in a balanced diet. The present study was aimed at assessing the effects of dehydrated moringa leaf powder (MLP) supplementation at 0–10% MLP levels on proximate, antioxidant, mineral, and sensory quality attributes of WWF leavened bread. Further, these quality attributes for MLP and WWF were also analyzed individually. As compared to WWF, MLP exhibited significantly higher (p

In this study, the effects of enzymatic modification using cellulase/xylanase on the composition and structural and functional properties of ginseng insoluble dietary fiber (G-IDF) were evaluated. Fourier transform infrared spectroscopy and scanning electron microcopy showed that enzymatic extraction treatment caused obvious structural alterations in ginseng-modified (G-MIDF) samples, which exhibited more porous and completely wrinkled surfaces. Comparing the peak morphology of G-MIDF with untreated IDF using X-ray diffractometry, the G-MIDF sample exhibited split peaks at a 2θ angle of 23.71°, along with the emergence of sharp peaks at 28.02°, 31.78°, and 35.07°. Thermo-gravimetric analysis showed that G-MIDF exhibited a specified range of pyrolysis temperature and is suitable for food applications involving processing at temperatures below 300 °C. Overall, it was evident from rheograms that both G-IDF and G-MIDF exhibited a resemblance with respect to viscosity changes as a function of the shear rate. Enzymatic treatment led to significant (p < 0.05) improvement in water holding, oil retention, water swelling, nitrite ion binding, bile acid binding, cholesterol absorption, and glucose absorption capacities.

Infrared spectroscopy (wavelengths ranging from 750–25,000 nm) offers a rapid means of assessing the chemical composition of a wide range of sample types, both for qualitative and quantitative analyses. Its use in the food industry has increased significantly over the past five decades and it is now an accepted analytical technique for the routine analysis of certain analytes. Furthermore, it is commonly used for routine screening and quality control purposes in numerous industry settings, albeit not typically for the analysis of bioactive compounds. Using the Scopus database, a systematic search of literature of the five years between 2016 and 2020 identified 45 studies using near-infrared and 17 studies using mid-infrared spectroscopy for the quantification of bioactive compounds in food products. The most common bioactive compounds assessed were polyphenols, anthocyanins, carotenoids and ascorbic acid. Numerous factors affect the accuracy of the developed model, including the analyte class and concentration, matrix type, instrument geometry, wavelength selection and spectral processing/pre-processing methods. Additionally, only a few studies were validated on independently sourced samples. Nevertheless, the results demonstrate some promise of infrared spectroscopy for the rapid estimation of a wide range of bioactive compounds in food matrices.

Oat predominately cultivated as forage crop and is not explored for its value-added bioactive moieties. This study was aimed to characterize five selected oat (Avena sativa L.) cultivars with respect to organic sugars, antioxidant activities, pesticide residues, mycotoxin and phenolic acids as measured HPLC. Five indigenous oat cultivars (Avon, PD2LV65, S2000, SGD2011, SGD81) were profiled for seven phenolic acids (gallic acid, vanillic acid, caffeic acid, syringic acid, p-coumaric acid, chlorogenic acid and ferulic acid). Highest concentrations of vanillic acid, gallic acid, caffeic acid, syringic acid, ferulic acid, p-coumaric acid and chlorogenic acid were detected in the SGD2011, SGD81, S2000, SGD2011, S2000, SGD2011 and PD2LV65 respectively. TPC in case of all oat cultivars ranged 50.88–101.56 mg/100 g. Among all oat cultivars, SGD-81 exhibited the highest DPPH activity, TPC, TFC and TFoC contents whereas, SGD-2011 showed the highest total anthocyanin content followed by AVON. S2000 showed the highest concentration of mycotoxin M1 (18.51 ppm), while lowest M1 content (10.51 ppm) were exhibited by SGD-81. Abamectin and permethrin pesticide residues were undetected in oat cultivars whereas, Dieldrin was only detected in SGD-81 and chloropyrifos was not detected in S2000 and SGD-81. Mandipropamid, parathion methyl, chlorthalonil, indoxacarb and lufernon were detected in the highest concentrations in SGD2011 and S2000 oat cultivars. Moreover, fructose, glucose and sucrose were found in highest amounts in S2000, PD2LV65 and SGD2011, respectively. Conclusively, it was evident from the results that SGD-81, SGD2011 and SG2000 could be utilized as source of important and promising phytochemicals of nutraceutical significance. Moreover, significant potential of these oat cultivars can be harnessed owing to value addition and exploitation in formulations of functional food ingredients and foodstuffs.

Multi-scale structural interactions of the arrowhead starch-linoleic/stearic acid complexes under different durations (20, 40 & 60 min) of dual-frequency power ultrasound (DFPU, 20/40 kHz) and their underlying mechanisms were discussed. Differential scanning calorimetry and X-ray diffraction (XRD) revealed V6 type (V6-I, II) crystalline structure for ultrasonically-treated arrowhead starch-linoleic acid (UTAS-LA) complexes. An increased degree of short-range molecular order as IR ratios of 1045/1022 cm−1 was evident from the FTIR results. The complexing index (CI) values of the complexes were greater than 65%, and the highest CI values of 83.04% and 81.26% were found in the case of UTAS-LA40 and UTAS-LA60, respectively. SEM results showed that LA-complexes had a sponge-like structure with smooth surfaces, while the SA-complexes exhibited flaky structures with irregular shapes and rough surfaces. The V-type complexes exhibited a higher digestion resistance than native AS and un-sonicated AS-LA/SA complexes due to partial RDS convention to RS.

The present study aimed at assessing the nutritional, antioxidant, and sensorial attributes of fenugreek seed powder (FSP) and supplemented functional noodles prepared by replacing wheat flour at 2–10% supplementation levels. Cooking losses of the value-added baked goods significantly (p

Sagittaria sagittifolia L. is a well-known plant, belongs to the Alismataceae family. Sonication can improve the functional properties of starch; hence, the aim of this study was to develop ultrasonically modified arrowhead starch (UMAS) using a sophisticated and eco-friendly tri-frequency power ultrasound (20/40/60 kHz) method at 300, 600, and 900 W for 15 and 30 min. Significant (p

Bacteriocins are ribosomal-synthesized peptides or proteins produced by bacterial strains and can inhibit pathogenic bacteria. Numerous factors influence the potential activity of bacteriocins in food matrices. For example, food additives usage, chemical composition, physical conditions of food, and sensitivity of proteolytic enzymes can constrain the application of bacteriocins as beneficial food preservatives. However, novel bacteriocin nanoencapsulation has appeared as an encouraging solution. In this review, we highlight the bacteriocins produced by Gram-negative bacteria and Gram-positive bacteria including lactic acid bacteria that have shown positive results as potential food preservatives. In addition, this review encompasses the major focus on bacteriocins encapsulation with nanotechnology to enhance the antimicrobial action of bacteriocins. Several strategies can be employed to encapsulate bacteriocins; however, the nanotechnological approach is one of the most effective strategies for avoiding limitations. Nanoparticles such as liposomes, chitosan, protein, and polysaccharides have been discussed to show their importance in the nanoencapsulation method. The nanoparticles are combined with bacteriocins to develop the nano-encapsulated bacteriocins from Gram-negative and Gram-positive bacteria including LAB. In food systems, nanoencapsulation enhances the stability and antimicrobial functionality of active peptides. This nanotechnological application provides a formulation of a broad range of antimicrobial peptides at the industry-scale level. Nano-formulated bacteriocins have been discussed along with examples to show a broader antimicrobial spectrum, increase bacteriocins’ applicability, extend antimicrobial spectrum and enhance stability.

Apricot powder was developed through spray drying using gum arabic as an encapsulating material at a concentration of 19%. Inlet air temperature, feed total soluble solids (TSS), feed flow rate, and atomization speed were 190 °C, 23.0 °C, 300.05 mL/h, and 17,433 rpm, respectively. This study was therefore conducted to investigate the influence of anticaking agents (tricalcium phosphate and silicon dioxide) and storage conditions (ambient and accelerated) on physicochemical, micrometric, and thermal characteristics of spray-dried apricot powder (SDAP) packaged in aluminum laminates. Both tricalcium phosphate (TCP) and silicon dioxide (SiO2) improved the shelf life and quality of SDAP, with TCP being more effective, since a lower increase in water activity (aw), moisture content, degree of caking, hygroscopicity, and rehydration time was observed in TCP-treated samples followed by SiO2-treated samples than the control. Furthermore, flowability, glass transition temperature (Tg), and sticky-point temperature (Ts) of SDAP tended to decrease in a significant manner (p < 0.05) under both storage conditions. However, the rate of decrease was higher during accelerated storage. The water activity of treated samples under ambient conditions did not exceed 0.60 and had a total plate count within the permissible range of 40,000 CFU/g, indicating shelf stability of the powder. The predicted shelf life of powder obtained from the Guggenheim–Anderson–de Boer (GAB) model and experimental values were very similar, with TCP-treated samples having a predicted shelf life of 157 days and 77 days under ambient and accelerated storage conditions, respectively. However, the respective experimental shelf life under the same conditions was 150 and 75 days, respectively. Similarly, the predicted shelf life of SiO2-treated samples under ambient and accelerated storage was 137 and 39 days, respectively, whereas the experimental values were 148 and 47 days, respectively. In conclusion, TCP proved more effective than SiO2 at preserving shelf life by preventing moisture ingress.

Background: Ginseng has a wide range of beneficial effects on health, such as the mitigation of minor and major inflammatory diseases, cancer, and cardiovascular diseases. There are abundant data regarding the health-enhancing properties of whole ginseng extracts and single ginsenosides; however, no study to date has determined the receptors that mediate the effects of ginseng extracts. In this study, for the first time, we explored whether the antiinflammatory effects of Rg3-enriched red ginseng extract (Rg3-RGE) are mediated by retinoid X receptor α–peroxisome-proliferating receptor γ (RXRα-PPARγ) heterodimer nuclear receptors. Methods: Nitric oxide assay, 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazoliumbromide assay, quantitative reverse transcription polymerase chain reaction, nuclear hormone receptor–binding assay, and molecular docking analyses were used for this study. Results: Rg3-RGE exerted antiinflammatory effects via nuclear receptor heterodimers between RXRα and PPARγ agonists and antagonists. Conclusion: These findings indicate that Rg3-RGE can be considered a potent antiinflammatory agent, and these effects are likely mediated by the nuclear receptor RXRα-PPARγ heterodimer. Keywords: Antiinflammation, Ginseng, Peroxisome-proliferating receptor γ, Retinoid X receptor α, Rg3-enriched red ginseng extract

The objective of this study was to explore and compare the effects of particle size distribution (PSD) on physicochemical, functional thermal and structural properties of extruded (ECP) and raw (RCP) chickpeas powders. Chickpea powders were obtained by flour fractionating through standard sieves of various particle sizes: 80, 120, 160, and 200 mesh (

Cymbopogon citratus is a medicinal and well-known aromatic plant which is usually used as a substitute for green-tea with extraordinary phytomedicinal potential. It is of great importance because it offers several promising health effects. The objective of the study was to investigate the antioxidant activity and total phenolic content of lemongrass leaves extracted by maceration and ultrasound-assisted extraction techniques. Different concentrations of both acetone and ethanol (50% and 70%) as solvents were tested for their radical scavenging activity against the stable free radical DPPH in quantization using a spectrophotometric assay. The ultrasound-assisted extraction technique had advantageous results in the polyphenols extraction yield (26.68%), TPC (61 mg GAE/g of extract) and DPPH (73.85%) compared to the maceration technique. Overall, the results were significant from 50% ethanol and the DPPH results were more significant from 70% ethanol than other concentrations. It is concluded that the ultrasound-assisted extraction is a better extraction technique for polyphenols than other conventional techniques.

The influence of different extraction methods, such as acidic (AC), enzymatic (EN), homogenization (H), ultrsonication (U) and alkali (AL), on structure, rheological, thermal and functional properties of soluble dietary fiber (SDF) from Sanchi flower was evaluated in this study. The highest extraction yield (23.14%) was obtained for AL-SDF extract. Glucose (Glc) and galactose (Gal) were found to be the major constituents in Sanchi SDF. Homogenization and Ultrsonication treatments caused significant compaction of pores in the microstructures. FTIR analysis showed increased hydrolysis of pectin and hemicellulose in U, AL and AC-SDF extracts. H-SDF and AC-SDF exhibited similar shear rate change with the rise in shear stress. H-SDF was thermally more stable than other SDF extracts. Among all extraction methods, H-SDF and U-SDF exhibited the highest water holding capacity (WHC), oil-holding capacity (OHC), Bile acid-adsorption capacity (BAC), Cholesterol-adsorption capacity (CAC) and Glucose adsorption capacity (GAC). Thus, Sanchi flower SDF with improved functional properties could be utilized as a functional food ingredient in the development of various food products.

Stevia rebaudiana (Bertoni) leaves consist of dietetically important diterpene steviol glycosides (SGs): stevioside (ST) and rebaudioside-A (Reb-A). ST and Reb-A are key sweetening compounds exhibiting a sweetening potential of 100 to 300 times more intense than that of table sucrose. Ultrasound-assisted extraction (UAE) of SGs was optimized by effective process optimization techniques, such as response surface methodology (RSM) and artificial neural network (ANN) modeling coupled with genetic algorithm (GA) as a function of ethanol concentration (X1: 0–100%), sonication time (X2: 10–54 min), and leaf–solvent ratio (X3: 0.148–0.313 g·mL−1). The maximum target responses were obtained at optimum UAE conditions of 75% (X1), 43 min (X2), and 0.28 g·mL−1 (X3). ANN-GA as a potential alternative indicated superiority to RSM. UAE as a green technology proved superior to conventional maceration extraction (CME) with reduced resource consumption. Moreover, UAE resulted in a higher total extract yield (TEY) and SGs including Reb-A and ST yields as compared to those that were obtained by CME with a marked reduction in resource consumption and CO2 emission. The findings of the present study evidenced the significance of UAE as an ecofriendly extraction method for extracting SGs, and UAE scale-up could be employed for effectiveness on an industrial scale. These findings evidenced that the UAE is a high-efficiency extraction method with an improved statistical approach.

In this study, the optimization and modeling of microwave-assisted extraction (MAE) of water-soluble curcuminoids prepared using novel steviol glycosides (SGs) was carried out using four independent process variables at varying levels—X1: microwave power (50–200 W), X2: stevioside concentration (50–200 mg/mL), X3: curcumin concentration (20–200 mg/mL), and X4: time (1–10 min)—in response surface methodology configuration. Moreover, the effects of stevioside, as the most cost-effective natural solubilizer, were also evaluated. The water solubility of curcuminoids increased from 11 to 1320 mg/L with the addition of stevioside as a natural solubilizer. Moreover, microwave heating synergistically with stevioside addition significantly (p < 0.05) increased the solubility up to 5400 mg/L. Based on the results, the optimum conditions providing the maximum solubilization of 16,700 mg/L were 189 W microwave power, 195 g/L stevioside concentration, 183 g/L curcuminoid concentration, and 9 min of incubation time. Moreover, MAE of curcuminoids using SGs might render a significant advantage for its wide-scale application to solubilizing the multitude of insoluble functional flavonoids in fruits, plants, and food materials.

The consequences of climate change are becoming increasingly discernible everywhere, and initiatives have been taken worldwide to mitigate climate change. In agriculture, particularly meat production from the livestock sector is known to contribute to greenhouse gas emissions (GHG) that drive climate change. Thus, to mitigate climate impact, strategies that include a shift in consumption patterns, technological advancements and reduction in food wastes/losses have been discussed. In this review, strategies that focus on meat consumption patterns are evaluated from the technological feasibility, environmental impact and consumer acceptance viewpoints. While plant-based substitutes have efficient nutrient conversion and lower GHG emissions, consumer perception, cost, and other trade-offs exist. Although cultured meat precludes the need of any animals and large land areas, its environmental impact is not clear and is contingent upon production systems and the achievement of decarbonization. Reducing wastes and the re-use of meat processing by-products have the potential to lower the environmental impact. Valuable proteins, heat, electricity and biofuels extracted from wastes and by-products not only reduce the disposal of wastes but also offset some GHG emissions. Perception related challenges that exist for all substitution strategies require specific consumer target marketing strategies. Policy measures such as taxation of meat products and subsidies for alternatives are also met with challenges, thereby requiring reforms or new policies.