Search

Implant migration is a predictor of arthroplasty survivorship. It is crucial to monitor the migration of novel hip prostheses within premarket clinical investigations. RSA is the gold standard method, but requires calibrated radiographs using specialised equipment. A commercial computed tomography micromotion analysis solution is a promising alternative but is not yet available for use with monobloc ceramic implants. This study aimed to develop and validate a CT-based spatial analysis (CTSA) method for use with ceramic implants. A phantom study was undertaken to assess accuracy and precision. A ceramic hip resurfacing arthroplasty (HRA) and 20 tantalum beads were implanted into a synthetic hip model and mounted onto a 6-degree of freedom motion stage. The hip was repeatedly scanned with a low dose CT protocol, with imposed micromovements. Data were interrogated using a semiautomated technique. The effective radiation dose for each scan was estimated to be 0.25 mSv. For the head implant, precision ranged between 0.11 and 0.28 mm for translations and 0.34°–0.42° for rotations. For the cup implant, precision ranged between 0.08 and 0.11 mm and 0.19° and 0.42°. For the head, accuracy ranged between 0.04 and 0.18 mm for translations and 0.28°–0.46° for rotations. For the cup, accuracy ranged between 0.04 and 0.08 mm and 0.17° and 0.43°. This in vitro study demonstrates that low dose CTSA of a ceramic HRA is similar in accuracy to RSA. CT is ubiquitous, and this method may be an alternative to RSA to measure prosthesis migration.

Aim This study aimed to assess if multiplayer virtual reality training was superior to single player training for acquisition of both technical and non-technical skills in learning complex open surgery. Method 40 participants (20 novice surgeons and 20 novice scrub nurses) were enrolled in this study and randomised to solo or team virtual reality training learning anterior approach total hip arthroplasty. Solo participants trained with virtual avatar counterparts, whilst teams trained in pairs (surgeon and scrub nurse). Both groups underwent 5 VR training sessions over 6 weeks. Subsequently, they underwent a real-life assessment in which they performed AA-THA on a high-fidelity model with real equipment in a simulated operating theatre. Teams performed together and solo participants were randomly paired up with a solo player of the opposite role. Videos of the assessment were marked by two blinded expert assessors. The primary outcome was team performance as graded by the NOTECHs II score. Secondary outcomes were procedure time, technical errors from an expert pre-defined protocol and acetabular component positioning. Results Teams outperformed solo trained participants in non-technical skills in the real-world assessment (NOTECHS-II score 50.3 ± 6.04 vs 43.90 ± 5.90, p=0.0275). They completed the assessment 28.11% faster than solos (31.22 minutes ±2.02 vs 43.43 ±2.71, p=0.01), and made close to half the number of technical errors when compared to the solo group (12.9 ± 8.3 vs 25.6 ± 6.1, p=0.001). Conclusions Multiplayer training appears to lead to faster surgery with fewer technical errors and the development of superior non-technical skills.

Introduction:In arthroplasty surgery, positioning of the components must be accurate and reproducible to avoid complications. Conventional guides are often used to align a component, but they require surgical skill and experience, and are prone to error. To this end, a single-use, size-specific, nylon guide (single-use nylon guide) has been developed for the purpose of increasing the accuracy without adding extra cost to the operation. The effectiveness of this type of guide was evaluated in using a synthetic bone study.Methods:A total of 66 synthetic femurs with the same osteoarthritic morphology were prepared. 3 surgeons participated in the experiments, and each surgeon created a drill hole for the femoral component by using the single-use nylon guide or a commercially-available, conventional, metal, neck-based guide (conventional guide). Anteversion, inclination, and insertion point acquired by the guide were compared between the guides, between surgeons, and to the computer-based plan.Results:Anteversion acquired by the single-use nylon guide (6.7° [4.9–11.5°]) was significantly closer to the plan (14.6°) than that acquired by the conventional guide (4.3° [2.4–8.6°]) ( p = 0.03). The insertion point was also significantly closer to the plan for the single-use nylon guide (3.8 mm ± 1.6 mm) than the conventional guide (5.7 mm ± 2.4 mm) ( p < 0.001). No significant difference was found for the inclination ( p = 0.76).Conclusion:A single-use, size-specific nylon guide was effective in acquiring a higher accuracy and precision in anteversion and insertion point than a conventional guide in this synthetic bone, hip resurfacing arthroplasty study. The use of single-use guides in other orthopaedic procedures should be explored.

Introduction Immersive Virtual Reality (iVR) is a novel technology which can enhance surgical training in a virtual environment without supervision. However, it is untested for the training to select, assemble and deliver instrumentation in orthopaedic surgery—typically performed by scrub nurses. This study investigates the impact of an iVR curriculum on this facet of the technically demanding revision total knee arthroplasty. Materials and methods Ten scrub nurses completed training in four iVR sessions over a 4-week period. Initially, nurses completed a baseline real-world assessment, performing their role with real equipment in a simulated operation assessment. Each subsequent iVR session involved a guided mode, where the software taught participants the procedural choreography and assembly of instrumentation in a simulated operating room. In the latter three sessions, nurses also undertook an assessment in iVR. Outcome measures were related to procedural sequence, duration of surgery and efficiency of movement. Transfer of skills from iVR to the real world was assessed in a post-training simulated operation assessment. A pre- and post-training questionnaire assessed the participants knowledge, confidence and anxiety. Results Operative time reduced by an average of 47% across the 3 unguided sessions (mean 55.5 ± 17.6 min to 29.3 ± 12.1 min, p > 0.001). Assistive prompts reduced by 75% (34.1 ± 16.8 to 8.6 ± 8.8, p p p p Conclusions For scrub nurses, unfamiliarity with complex surgical procedures or equipment is common. Immersive VR training improved their understanding, technical skills and efficiency. These iVR-learnt skills transferred into the real world.

Hip resurfacing arthroplasty (HRA) is an alternative to total hip arthroplasty (THA) in younger patients with good bone quality who wish to return to high levels of activity. Usage of HRA has declined due to implant-specific complications—metal debris and periarticular soft tissue damage, implant loosening, and femoral neck fracture. These were most common with implants which have now been withdrawn, but fears remain. HRA is more technically challenging than THA, but revision rates for patients operated at specialist centres are equivalent. Gait and biomechanical studies suggest that HRA better restores normal function compared to THA, and registry-based studies suggest a lower mortality. However, randomised clinical trials have not shown superiority using conventional patient-reported outcome measures. As the clinical indications are dependent on patient demands, and more active patients are more likely to wear out artificial joints, it is difficult to robustly compare HRA and THA. Today, safe HRA implants inserted by experienced surgeons in active, male patients seem to deliver the most predictable outcomes, high performance and longevity.

Tibial plateau fractures are peri-articular knee fractures of the proximal tibia. The presentation is dependent on the mechanism of injury. The tibial plateau is the bony platform of the distal half of the knee joint, and is made up of a medial and lateral condyle separated by the intercondylar eminence. The presentation of tibial plateau fractures can vary greatly as a result of the bimodal mechanism of injury and patient characteristics. The patient should be assessed for life- and limb-threatening injuries in accordance with British Orthopaedic Association Standards of Trauma guidelines. Imaging is undertaken to understand configuration of the fracture, which is classified by the Schatzker classification. Definitive management of the fracture depends on the severity, ranging from conservative to surgical management. Surgery is required for more severe tibial plateau fractures to restore articular congruity, mechanical alignment, ligamentous stability and to permit early mobilisation. Medium-term functional outcome after tibial plateau fractures is generally excellent when anatomy and stability is restored. At least half of patients return to their original level of physical activity. Surgical management of tibial plateau fractures is not without complication. Risk factors include postoperative arthritis, bicondylar and comminuted fractures, meniscal removal, instability, malalignment and articular incongruity. Tibial plateau fractures account for 1% of all fractures, and typically occur either as a fragility fracture or secondary to a high-energy impact. These latter injuries are associated with extensive soft tissue injury, life- and limb-threatening complications and long-term sequelae. While outcomes are generally good, severe injuries are at higher risk of infection and post-traumatic arthritis requiring knee arthroplasty. This article considers the anatomy, diagnosis and evidence-based management strategies for tibial plateau fracture.

Background Fully immersive virtual reality (VR) uses headsets to situate a surgeon in a virtual operating room to perform open surgical procedures. The aims of this study were to determine (1) if a VR curriculum for training residents to perform anterior approach total hip replacement (AA-THR) was feasible, (2) if VR enabled residents' performance to be measured objectively, and (3) if cognitive and motor skills that were learned with use of VR were transferred to the physical world. Methods The performance of 32 orthopaedic residents (surgical postgraduate years [PGY]-1 through 4) with no prior experience with AA-THR was measured during 5 consecutive VR training and assessment sessions. Outcome measures were related to procedural sequence, efficiency of movement, duration of surgery, and visuospatial precision in acetabular component positioning and femoral neck osteotomy, and were compared with the performance of 4 expert hip surgeons to establish competency-based criteria. Pretraining and post-training assessments on dry bone models were used to assess the transfer of visuospatial skills from VR to the physical world. Results Residents progressively developed surgical skills in VR on a learning curve through repeated practice, plateauing, on average, after 4 sessions (4.1 ± 0.6 hours); they reached expert VR levels for 9 of 10 metrics (except femoral osteotomy angle). Procedural errors were reduced by 79%, assistive prompts were reduced by 70%, and procedural duration was reduced by 28%. Dominant and nondominant hand movements were reduced by 35% and 36%, respectively, and head movement was reduced by 44%. Femoral osteotomy was performed more accurately, and acetabular implant orientation improved in VR assessments. In the physical world assessments, experts were more accurate than residents prior to simulation, but were matched by residents after simulation for all of the metrics except femoral osteotomy angle. The residents who performed best in VR were the most accurate in the physical world, while 2 residents were unable to achieve competence despite sustained practice. Conclusions For novice surgeons learning AA-THR skills, fully immersive VR technology can objectively measure progress in the acquisition of surgical skills as measured by procedural sequence, efficiency of movement, and visuospatial accuracy. Skills learned in this environment are transferred to the physical environment.

Background: A precise assessment of cup version after hip resurfacing is generally requested, especially in clinical trials or in case of complications. Aims: To identify which diagnostic imaging modality, between AP pelvis X-rays, the AP Pelvis CT Scout image and reduced-dose axial CT scan, is the most precise to assess cup version of an all-ceramic hip resurfacing implant in a first-in-human clinical trial. Methods: We retrospectively assessed the cup version of the first 20 patients who underwent an experimental all-ceramic hip resurfacing on AP pelvis X-rays (0.8 mSv of radiation), AP pelvis CT scout images (0.016 mSv) and axial CT slices performed using a reduced dose protocol (0.3 mSv). The intra-observer and inter-observer reliabilities were calculated. Results: Reduced dose Pelvis CT scan was the most precise imaging modality to detect cup version (Pearson Correlation Coefficient, PCC = 0.98, p < 0.001). The AP Pelvis CT Scout image was found to be sufficient to measure cup version within an acceptable margin of tolerance (mean difference ± 4.7° from pelvis CT scan) and highly correlated to axial pelvis CT scan measurements (PCC 0.97, p < 0.001). Analysis of cup version from AP X-rays poorly correlated with measurements from Pelvis CT (PCC 0.59, p = 0.006). Conclusions: Due to lower radiation exposure and highest accuracy, reduced dose CT is a valid modality to measure acetabular cup version after ceramic hip resurfacing. Plain X-rays are not accurate nor precise to measure version, whereas high agreement of measurements between AP Pelvis CT Scout and axial pelvis CT scan was found.

There have been significant developments since the first attempts to treat degenerated hips with tissue interpositional arthroplasty (with materials such as fascia lata and pig’s bladder) or hemi-resurfacing using glass molds by Smith-Peterson in 1937 [1]. While the first total hip replacement has been attributed to Wiles in 1938, it was considered a failure—its success and widespread adoption only occurred in the 1960s when Sir John Charnley introduced “low-friction arthroplasty” using acrylic cement for fixation. This early age of hip arthroplasty has been followed by decades of incremental development directed at reducing failure (including that related to loosening, instability, implant wear, and osteolysis) while accommodating the high-activity profile and increased longevity of the modern patient [1].

Hip and knee arthroplasties are life-changing procedures, reducing pain and restoring function after end-stage arthrosis. Almost 90% of patients who have undergone hip arthroplasty, and 82% after knee arthroplasty, report improvement in quality of life after surgery [1]; this leaves a significant number of dissatisfied patients. The modern surgeon can make decisions regarding surgical approach, implant design and component orientation. However, it is challenging to gain proficiency in a wide variety of surgical configurations. A smaller repertoire is technically and economically more feasible, and thus a one-size-fits-all approach is commonplace. Hip and knee arthroplasties are forgiving procedures, most frequently performed in older patients without high functional demands. The future arthroplasty surgeon is faced with new challenges—patients with higher demand, expectations and longer life expectancy, in addition to an increasing burden of revision surgery. Here, we discuss ‘a la carte’ joint replacement, which is both patient specific and bone/soft tissue conservative. It may improve overall satisfaction while conserving bone stock in the event of future revision surgery.

BACKGROUND: Accurate implant orientation reduces wear and increases stability in arthroplasty but is a technically demanding skill. Augmented reality (AR) headsets overlay digital information on top of the real world. We have developed an enhanced AR headset capable of tracking bony anatomy in relation to an implant, but it has not yet been assessed for its suitability as a training tool for implant orientation. QUESTIONS/PURPOSES: (1) In the setting of simulated THA performed by novices, does an AR headset improve the accuracy of acetabular component positioning compared with hands-on training by an expert surgeon? (2) What are trainees’ perceptions of the AR headset in terms of realism of the task, acceptability of the technology, and its potential role for surgical training? METHODS: Twenty-four study participants (medical students in their final year of school, who were applying to surgery residency programs, and who had no prior arthroplasty experience) participated in a randomized simulation trial using an AR headset and a simulated THA. Participants were randomized to two groups completing four once-weekly sessions of baseline assessment, training, and reassessment. One group trained using AR (with live holographic orientation feedback) and the other received one-on-one training from a hip arthroplasty surgeon. Demographics and baseline performance in orienting an acetabular implant to six patient-specific values on the phantom pelvis were collected before training and were comparable. The orientation error in degrees between the planned and achieved orientations was measured and was not different between groups with the numbers available (surgeon group mean error ± SD 16° ± 7° versus AR 14° ± 7°; p = 0.22). Participants trained by AR also completed a validated posttraining questionnaire evaluating their experiences. RESULTS: During the four training sessions, participants using AR-guidance had smaller mean (± SD) errors in orientation than those receiving guidance from the surgeon: 1° ± 1° versus AR 6° ± 4°, p < 0.001. In the fourth session’s assessment, participants in both groups had improved (surgeon group mean improvement 6°, 95% CI, 4–8°; p < 0.001 versus AR group 9°, 95% CI 7–10°; p < 0.001). There was no difference between participants in the surgeon-trained and AR-trained group: mean difference 1.2°, 95% CI, -1.8 to 4.2°; p = 0.281. In posttraining evaluation, 11 of 12 participants would use the AR platform as a training tool for developing visuospatial skills and 10 of 12 for procedure-specific rehearsals. Most participants (11 of 12) stated that a combination of an expert trainer for learning and AR for unsupervised training would be preferred. CONCLUSIONS: A novel head-mounted AR platform tracked an implant in relation to bony anatomy to a clinically relevant level of accuracy during simulated THA. Learners were equally accurate, whether trained by AR or a surgeon. The platform enabled the use of real instruments and gave live feedback; AR was thus considered a feasible and valuable training tool as an adjunct to expert guidance in the operating room. Although there were no differences in accuracy between the groups trained using AR and those trained by an expert surgeon, we believe the tool may be useful in education because it demonstrates that some motor skills for arthroplasty may be learned in an unsupervised setting. Future studies will evaluate AR-training for arthroplasty skills other than cup orientation and its transfer validity to real surgery. LEVEL OF EVIDENCE: Level I, therapeutic study.

Aims Arthroplasty skills need to be acquired safely during training, yet operative experience is increasingly hard to acquire by trainees. Virtual reality (VR) training using headsets and motion-tracked controllers can simulate complex open procedures in a fully immersive operating theatre. The present study aimed to determine if trainees trained using VR perform better than those using conventional preparation for performing total hip arthroplasty (THA). Patients and Methods A total of 24 surgical trainees (seven female, 17 male; mean age 29 years (28 to 31)) volunteered to participate in this observer-blinded 1:1 randomized controlled trial. They had no prior experience of anterior approach THA. Of these 24 trainees, 12 completed a six-week VR training programme in a simulation laboratory, while the other 12 received only conventional preparatory materials for learning THA. All trainees then performed a cadaveric THA, assessed independently by two hip surgeons. The primary outcome was technical and non-technical surgical performance measured by a THA-specific procedure-based assessment (PBA). Secondary outcomes were step completion measured by a task-specific checklist, error in acetabular component orientation, and procedure duration. Results VR-trained surgeons performed at a higher level than controls, with a median PBA of Level 3a (procedure performed with minimal guidance or intervention) versus Level 2a (guidance required for most/all of the procedure or part performed). VR-trained surgeons completed 33% more key steps than controls (mean 22 (sd 3) vs 12 (sd 3)), were 12° more accurate in component orientation (mean error 4° (sd 6°) vs 16° (sd 17°)), and were 18% faster (mean 42 minutes (sd 7) vs 51 minutes (sd 9)). Conclusion Procedural knowledge and psychomotor skills for THA learned in VR were transferred to cadaveric performance. Basic preparatory materials had limited value for trainees learning a new technique. VR training advanced trainees further up the learning curve, enabling highly precise component orientation and more efficient surgery. VR could augment traditional surgical training to improve how surgeons learn complex open procedures. Cite this article: Bone Joint J 2019;101-B:1585–1592

Introduction: The purpose of this national study was to audit the weight-bearing practice of orthopaedic services in the National Health Service (NHS) in the treatment of operatively and non-operatively treated ankle fractures. Methods: A multicentre prospective two-week audit of all adult ankle fractures was conducted between July 3rd 2017 and July 17th 2017. Fractures were classified using the AO/OTA classification. Fractures fixed with syndesmosis screws or unstable fractures (>1 malleolus fractured or talar shift present) treated conservatively were excluded. No outcome data were collected. In line with NICE (The National Institute for Health and Care Excellence) criteria, “early” weight-bearing was defined as unrestricted weight-bearing on the affected leg within 3 weeks of injury or surgery and “delayed” weight-bearing as unrestricted weight-bearing permitted after 3 weeks. Results: 251 collaborators from 81 NHS hospitals collected data: 531 patients were managed non-operatively and 276 operatively. The mean age was 52.6 years and 50.5 respectively. 81% of non-operatively managed patients were instructed for early weight-bearing as recommended by NICE. In contrast, only 21% of operatively managed patients were instructed for early weight-bearing. Discussion: The majority of patients with uni-malleolar ankle fractures which are managed non-operatively are treated in accordance with NICE guidance. There is notable variability amongst and within NHS hospitals in the weight-bearing instructions given to patients with operatively managed ankle fractures. Conclusion: This study demonstrates community equipoise and suggests that the randomized study to determine the most effective strategy for postoperative weight-bearing in ankle fractures described in the NICE research recommendation is feasible.

Background Chronic periprosthetic joint infection (PJI) is a devastating complication that can occur following total joint replacement. Patients with chronic PJI report a substantially lower quality of life and face a higher risk of short-term mortality. Establishing a diagnosis of chronic PJI is challenging because of conflicting guidelines, numerous tests, and limited evidence. Delays in diagnosing PJI are associated with poorer outcomes and morbid revision surgery. The purpose of this systematic review was to compare the diagnostic accuracy of serum, synovial, and tissue-based tests for chronic PJI. Methods This review adheres to the Cochrane Collaboration's diagnostic test accuracy methods for evidence searching and syntheses. A detailed search of MEDLINE, Embase, the Cochrane Library, and the grey literature was performed to identify studies involving the diagnosis of chronic PJI in patients with hip or knee replacement. Eligible studies were assessed for quality and bias using the Quality Assessment of Diagnostic Accuracy Studies-2 (QUADAS-2) tool. Meta-analyses were performed on tests with sufficient data points. Summary estimates and hierarchical summary receiver operating characteristic (HSROC) curves were obtained using a bivariate model. Results A total of 12,616 citations were identified, and 203 studies met the inclusion criteria. Of these 203 studies, 170 had a high risk of bias. Eighty-three unique PJI diagnostic tests were identified, and 17 underwent meta-analyses. Laboratory-based synovial alpha-defensin tests and leukocyte esterase reagent (LER) strips (2+) had the best performance, followed by white blood-cell (WBC) count, measurement of synovial C-reactive protein (CRP) level, measurement of the polymorphonuclear neutrophil percentage (PMN%), and the alpha-defensin lateral flow test kit (Youden index ranging from 0.78 to 0.94). Tissue-based tests and 3 serum tests (measurement of interleukin-6 [IL-6] level, CRP level, and erythrocyte sedimentation rate [ESR]) had a Youden index between 0.61 to 0.75 but exhibited poorer performance compared with the synovial tests mentioned above. Conclusions The quality of the literature pertaining to chronic PJI diagnostic tests is heterogeneous, and the studies are at a high risk for bias. We believe that greater transparency and more complete reporting in studies of diagnostic test results should be mandated by peer-reviewed journals. The available literature suggests that several synovial fluid-based tests perform well for diagnosing chronic PJI and their use is recommended in the work-up of any suspected case of chronic PJI. Level of evidence Diagnostic Level III. See Instructions for Authors for a complete description of levels of evidence.

AimsThe hip’s capsular ligaments passively restrain extreme range of movement (ROM) by wrapping around the native femoral head/neck. We determined the effect of hip resurfacing arthroplasty (HRA), dual-mobility total hip arthroplasty (DM-THA), conventional THA, and surgical approach on ligament function.Materials and MethodsEight paired cadaveric hip joints were skeletonized but retained the hip capsule. Capsular ROM restraint during controlled internal rotation (IR) and external rotation (ER) was measured before and after HRA, DM-THA, and conventional THA, with a posterior (right hips) and anterior capsulotomy (left hips).ResultsHip resurfacing provided a near-native ROM with between 5° to 17° increase in IR/ER ROM compared with the native hip for the different positions tested, which was a 9% to 33% increase. DM-THA generated a 9° to 61° (18% to 121%) increase in ROM. Conventional THA generated a 52° to 100° (94% to 199%) increase in ROM. Thus, for conventional THA, the capsule function that exerts a limit on ROM is lost. It is restored to some extent by DM-THA, and almost fully restored by hip resurfacing. In positions of low flexion/extension, the posterior capsulotomy provided more normal function than the anterior, possibly because the capsule was shortened during posterior repair. However, in deep flexion positions, the anterior capsulotomy functioned better.ConclusionNative head-size and capsular repair preserves capsular function after arthroplasty. The anterior and posterior approach differentially affect postoperative biomechanical function of the capsular ligaments. Cite this article: Bone Joint J 2019;101-B:426–434.

This note describes a surgical technique to kinematically align a medial Oxford® UKA. Applying kinematic alignment principles is an alternative, personalised, physiological, and potentially clinically advantageous method for implanting the medial Oxford® UKA. Further investigations are needed to better define the reproducibility and clinical impact of this new surgical technique.

This note describes a surgical technique to kinematically align a medial Oxford® UKA. Applying kinematic alignment principles is an alternative, personalised, physiological, and potentially clinically advantageous method for implanting the medial Oxford® UKA. Further investigations are needed to better define the reproducibility and clinical impact of this new surgical technique.

INTRODUCTION: High-volume unicompartmental knee arthroplasty (UKA) surgeons have lower revision rates, in part due to improved intra-operative component alignment. This study set out to determine whether PSI might allow non-expert surgeons to achieve the same level of accuracy as expert surgeons. MATERIALS AND METHODS: Thirty-four surgical trainees with no prior experience of UKA, and four high-volume UKA surgeons were asked to perform the tibial saw cuts for a medial UKA in a sawbone model using both conventional and patient-specific instrumentation (PSI) with the aim of achieving a specified pre-operative plan. Half the participants in each group started with conventional instrumentation, and half with PSI. CT scans of the 76 cut sawbones were then segmented and reliably orientated in space, before saw cut position in the sagittal, coronal and axial planes was measured, and compared to the pre-operative plan. RESULTS: The compound error (absolute error in the coronal, sagittal and axial planes combined) for experts using conventional instruments was significantly less than that of the trainees (11.6°±4.0° v 7.7° ±2.3º, p = 0.029). PSI improved trainee accuracy to the same level as experts using conventional instruments (compound error 5.5° ±3.4º v 7.7° ±2.3º, p = 0.396) and patient-specific instruments (compound error 5.5° ±3.4º v 7.3° ±4.1º, p = 0.3). PSI did not improve the accuracy of high-volume surgeons (p = 0.3). CONCLUSIONS: In a sawbone model, PSI allowed inexperienced surgeons to achieve more accurate saw cuts, equivalent to expert surgeons, and thus has the potential to reduce revision rates. The next test will be to determine whether these results can be replicated in a clinical trial.

Background The purpose of this study was to examine the gait pattern of total hip arthroplasty (THA) patients with a new short femoral stem at different speeds and inclinations. Materials and methods A total of 40 unilateral THA patients were tested on an instrumented treadmill. They comprised two groups (shorter stemmed THA n = 20, longer stemmed THA n = 20), both which had the same surgical posterior approach. The shorter femoral stemmed patients were taken from an ongoing hip trial with minimum 12 months postop. The comparative longer THR group with similar disease and severity were taken from a gait database along with a demographically similar group of healthy controls (n = 35). All subjects were tested through their entire range of gait speeds and inclines with ground reaction forces collected. Body weight scaling was applied and a symmetry index to compare the implanted hip to the contralateral normal hip. An analysis of variance with significance set at α = 0.05 was used. Results The experimental groups were matched demographically and implant groups for patient reported outcome measures and radiological disease. Both THA groups walked slower than controls, but symmetry at all intervals for all groups were not significantly different. Push-off loading was less favourable for both the shorter and longer stemmed THR groups (p

Background For total hip arthroplasty (THA), cognitive training prior to performing real surgery may be an effective adjunct alongside simulation to shorten the learning curve. This study sought to create a cognitive training tool (CTT) to perform anterior approach (AA)-THA, which was validated by expert surgeons, and test its use as a training tool compared with conventional material. Methods We employed a modified Delphi method with 4 expert surgeons from 3 international centers of excellence. Surgeons were independently observed performing THA before undergoing semistructured cognitive task analysis (CTA) and before completing successive rounds of surveys until a consensus was reached. Thirty-six surgical residents (postgraduate year [PGY]-1 through PGY-4) were randomized to cognitive training or training with a standard operation manual with surgical videos before performing a simulated AA-THA. Results The consensus CTA defined THA in 11 phases, in which were embedded 46 basic steps, 36 decision points, and 42 critical errors and linked strategies. This CTA was mapped onto an open-access web-based CTT. Surgeons who prepared with the CTT performed a simulated THA 35% more quickly (time, mean 28 versus 38 minutes) with 69% fewer errors in instrument selection (mean 29 versus 49 instances), and required 92% fewer prompts (mean 13 versus 25 instances). They were more accurate in acetabular cup orientation (inclination error, mean 8° versus 10°; anteversion error, mean 14° versus 22°). Conclusions This validated CTT for arthroplasty provides structure for competency-based learning. It is more effective at preparing orthopaedic trainees for a complex procedure than conventional materials, as well as for learning sequence, instrumentation utilization, and motor skills. Clinical relevance Cognitive training combines education on decision-making, knowledge, and technical skill. It is an inexpensive technique to teach surgeons to perform hip arthroplasty and is more effective than current preparation methods.

Excessive daytime sleepiness (EDS) is described as inappropriate and undesirable sleepiness during waking hours and is a common non-motor symptom in Parkinson's disease, affecting up to 50% of patients. EDS has a large impact on the quality of life of Parkinson's disease patients as well as of their caregivers, in some cases even more than the motor symptoms of the disease. Drug-induced EDS is a particular problem as many dopamine agonists used for the treatment of Parkinson's disease have EDS as an adverse effect. Dopaminergic treatment may also render a subset of Parkinson's disease patients at risk for sudden-onset sleep attacks that occur without warning and can be particularly hazardous if the patient is driving. This demonstrates the need for early recognition and management not only to increase health-related quality of life but also to ensure patient safety. There are many assessment tools for EDS, including the Epworth Sleepiness Scale (ESS) and the Multiple Sleep Latency Test (MSLT), although only the Parkinson's Disease Sleep Scale (PDSS) and the SCales for Outcomes in PArkinson's Disease-Sleep (SCOPA-S) are specifically validated for Parkinson's disease. Polysomnography can be used when necessary. Management comprises non-pharmacological and pharmacological approaches. Non-pharmacological approaches can be the mainstay of treatment for mild to moderate EDS. Advice on good sleep hygiene is instrumental, as pharmacological approaches have yet to provide consistent and reliable results without significant adverse effects. The efficacy of pharmacological treatment of EDS in Parkinson's disease using wakefulness-promoting drugs such as modafinil remains controversial. Further areas of research are now also focusing on adenosine A(2A) receptor antagonists, sodium oxybate and caffeine to promote wakefulness. A definitive treatment for the highly prevalent drug-induced EDS has not yet been found.

Computer-aided orthopaedic surgery is now used for improving the accuracy and position in a variety of procedures, including total knee arthroplasty and cruciate ligament reconstruction. Current treatment for femoroacetabular impingement comprises both open and arthroscopic techniques. Although both have their advantages and pitfalls, it is evident that a quantitative and minimally invasive methodology, for calculating the arc of resection and performing a precise osteotomy, would improve clinical outcome. In this review we discuss recent research exploring the role of navigation and robotics for the treatment of femoroacetabular impingement.

This study aimed to review the isometric point of the posterior cruciate ligament (PCL) based on insertional locations identified in recent anatomic studies by use of a 3-dimensional knee model.Ten living subjects with healthy knees were evaluated. High-resolution computed tomography scans were performed at 3 positions of 0°, 90°, and 135°, and 3-dimensional knee images were constructed. Customized software was used to define tibial and femoral insertion points of the PCL, based on recently described anatomy. The femoral attachment site of the PCL was divided into 4 sectors (labeled A through D), and the tibial attachment site was divided into 6 sectors (labeled 1 through 6). Twenty-four virtual PCL bundles were created between these sectors, and their length was measured in the 3 knee flexion positions.In 0° and 90° of knee flexion, the virtual bundle showing the least amount of length change (1.10 ± 0.66 mm) was at sector D-6, that is, a posteromedial bundle inserting into the most posterior femoral sector (sector D) and the most distal tibial sector (sector 6). This change was not significantly different compared with all other virtual bundles with tibial points connected to femoral sector D (P.05). An isometric position for the PCL (length change2 mm) could not be found in 135° of knee flexion because of lengthening of all virtual bundles.Our data suggest that the femoral attachment point is more important than the tibial attachment point: any of the 6 tibial bundles attached to the most posterior femoral sector had similar isometric properties.Reproducing normal tibial and femoral anatomy underpins PCL surgical reconstruction. These findings suggest that to perform an isometrically accurate PCL reconstruction, particular attention should be paid to the location of the femoral attachment site, once the tibial footprint has been established. There were no isometric points in any virtual PCL bundle in the fully flexed knee because of excessive lengthening. Therefore, to avoid lengthening of the reconstructed graft, we recommend that fixation is performed at knee flexion angles between 0° and 90° and that patients avoid high flexion during postoperative rehabilitation.

How researchers at Imperial College are using virtual and augmented reality to help surgeons train and operate.

Non-ergot dopamine receptor agonists, such as ropinirole, pramipexole, rotigotine and apomorphine, may alleviate some non-motor symptoms in Parkinson's disease (PD) while others may be precipitated. In this review, we discuss how dopamine receptor agonists can both ameliorate and aggravate the sleep problems in PD, a key non-motor symptom of this disease.

(RE: Ollivier M, Parratte S, Lunebourg A, Viehweger E, Argenson JN. The John Insall Award: No functional benefit after unicompartmental knee arthroplasty performed with patient-specific instrumentation: A randomized trial. [Published online ahead of print March 20, 2015]. Clin Orthop Relat Res. DOI: 10.1007/s11999-015-4259-0 ). The authors certify that they, or any members of their immediate families, have no commercial associations (eg, consultancies, stock ownership, equity interest, patent/licensing arrangements, etc) that might pose a conflict of interest in connection with the submitted article. All ICMJE Conflict of Interest Forms for authors and Clinical Orthopaedics and Related Research® editors and board members are on file with the publication and can be viewed on request. The opinions expressed are those of the writers, and do not reflect the opinion or policy of CORR® or The Association of Bone and Joint Surgeons®.

Performing arthroplasty for gonarthrosis is clinically effective and associated with high levels of patient satisfaction. The increasing global burden of osteoarthritis provides a challenge for competitive health-care markets with finite resources – the cost-effectiveness of arthroplasty is under scrutiny. When the direct and indirect costs of performing surgery are weighed against the personal and societal benefits of treating symptomatic gonarthrosis, both total and unicompartmental knee arthroplasty are cost-effective, at a price significantly under international willingness-to-pay thresholds.

Background Traumatic anterior shoulder instability (TASI) accounts for 95% of glenohumeral dislocations and is associated with soft tissue and bony pathoanatomies. Non-operative treatments include slings, bracing and physiotherapy. Operative treatment is common, including bony and soft-tissue reconstructions performed through open or arthroscopic approaches. There is management variation in patient pathways for TASI including when to refer and when to operate. Methods A scoping review of systematic reviews, randomised controlled trials, comparing operative with non-operative treatments and different operative treatments were the methods followed. Search was conducted for online bibliographic databases and reference lists of relevant articles from 2002 to 2012. Systematic reviews were appraised using AMSTAR (assessment of multiple systematic reviews) criteria. Controlled trials were appraised using the CONSORT (consolidation of standards of reporting trials) tool. Results Analysis of the reviews did not offer strong evidence for a best treatment option for TASI. No studies directly compare open, arthroscopic and structured rehabilitation programmes. Evaluation of arthroscopic studies and comparison to open procedures was difficult, as many of the arthroscopic techniques included are no longer used. Recurrence rate was generally considered the best measure of operative success, but was poorly documented throughout all studies. There was conflicting evidence on the optimal timing of intervention and no consensus on any scoring system or outcome measure. Conclusions There is no agreement about which validated outcome tool should be used for assessing shoulder instability in patients. There is limited evidence regarding the comparative effectiveness of surgical and non-surgical treatment of TASI, including a lack of evidence regarding the optimal timing of such treatments. There is a need for a well-structured randomised control trial to assess the efficacy of surgical and non-surgical interventions for this common type of shoulder instability.

PURPOSE: To determine whether a global rating scale (GRS) with construct validity can also be used to assess the learning curve of individual orthopaedic trainees during simulated arthroscopic knee meniscal repair. METHODS: An established arthroscopic GRS was used to evaluate the technical skill of 19 orthopaedic residents performing a standardized arthroscopic meniscal repair in a bioskills laboratory. The residents had diagnostic knee arthroscopy experience but no experience with arthroscopic meniscal repair. Residents were videotaped performing an arthroscopic meniscal repair on 12 separate occasions. Their performance was assessed by use of the GRS and motion analysis objectively measuring the time taken to complete tasks, path length of the subject's hands, and number of hand movements. One author assessed all 228 videos, whereas 2 other authors rated 34 randomly selected videos, testing the interobserver reliability of the GRS. The validity of the GRS was tested against the motion analysis. RESULTS: Objective assessment with motion analysis defined the surgeon's learning curve, showing significant improvement by each subject over 12 episodes (P < .0001). The GRS also showed a similar learning curve with significant improvements in performance (P < .0001). The median GRS score improved from 15 of 34 (interquartile range, 14 to 17) at baseline to 22 of 34 (interquartile range, 19 to 23) in the final period. There was a moderate correlation (P < .0001, Spearman test) between the GRS and motion analysis parameters (r = -0.58 for time, r = -0.58 for path length, and r = -0.51 for hand movements). The inter-rater reliability among 3 trained assessors using the GRS was excellent (Cronbach α = 0.88). CONCLUSIONS: When compared with motion analysis, an established arthroscopic GRS, with construct validity, also offers a moderately feasible method to monitor the learning curve of individual residents during simulated knee meniscal repair. CLINICAL RELEVANCE: An arthroscopic GRS can be used for monitoring skill improvement during knee meniscal repair and has the potential for use as a training and assessment tool in the real operating room.

Introduction Increased noise levels in hospitals, critical care units, and peri-operative areas have been associated with higher levels of sleep deprivation and patient stress. The World Health Organization (WHO) guidelines stipulate a limit of 35 decibels (dB(A)) equivalent continuous sound level (LEq) during the day and 30 dB(A) LEq at night in patients’ rooms. To date, no quantitative studies of noise levels have been performed in burn units. The objective of this study was to quantify noise levels in a burn critical care unit to ascertain compliance with guidelines in order to minimize this potential insult. Methods An A-weighted sound pressure level meter was used to measure the ambient noise levels in a burn intensive care unit. Maximum and minimum sound pressure levels were measured at 30-min intervals on 10 days over a 1 month period. Measurements were obtained during shift changes and random times during the day and night-time. Descriptive statistical analyses were performed, to calculate means and standard deviations. Noise measurements at specified times were compared using analysis of variance (ANOVA). Results Mean dB(A) LEq values for shift changes, day, and night-time were 65.9 ± 2.8, 65.7 ± 2.6, and 60.9 ± 5.2 dB(A), respectively. There was no significant difference in dB(A)max or dB(A)min between shift changes, day or night-time (p > 0.05). However, night-time minimum values were consistently lower. There was no significant difference between sound pressure level (SPL) inside and outside patients’ rooms (p > 0.05) at any time. Conclusions Irrespective of time or location, the mean dB(A) LEq in the burn unit was significantly greater than World Health Organization (WHO), National Institute for Occupational Safety and Health (NIOSH), and the Environmental Protection Agency (EPA) recommendations. Guidelines for decreasing noise exposure are necessary to reduce potential negative effects on patients, visitors, and staff.

To provide a fast and reliable tool to measure the whole burden of non-motor symptoms in Parkinson’s disease The Non-Motor Symptoms Scale (NMSS) was developed in 2006 to provide clinicians with an instrument for assessment of non-motor symptoms (NMSs) in patients with Parkinson’s disease (PD) [1]. This validated instrument categorizes NMSs into 30 questions in nine domains. The scale estimates the impact of NMSs by weighing each symptom by frequency and severity, thus capturing their global burden for patients.

Fatigue is a common yet poorly understood and underresearched nonmotor symptom in Parkinson’s disease. Although fatigue is recognized to significantly affect health-related quality of life, it remains underrecognised and empirically treated. In this paper, the prevalence of fatigue as measured by a validated visual analogue scale and the Parkinson’s disease nonmotor symptoms scale (PDNMSS) was correlated with other motor and nonmotor comorbidities. In a cohort of patients from a range of disease stages, occurrence of fatigue correlated closely with more advanced Parkinson’s disease, as well as with depression, anxiety, and sleep disorders, hinting at a common underlying basis.

Many impinging hips are said to have a mix of features of femoral cam and an overcovered acetabulum causing pincer impingement. Correction of such a mixed picture by reduction of the cam lesion and the acetabular rim is the suggested treatment.We therefore asked two questions: (1) Is the acetabulum in cam impingement easily distinguishable from the pincer acetabulum, or is there a group with features of both types of impingement? (2) Is version or depth of socket better able to distinguish cam from pincer impingement?We analyzed the morphologic features of the acetabulum and rim profile of 20 normal, healthy hips, 20 with cams and 20 with pincers on CT. Pelvises were digitized, orientated to the best-fit acetabular plane, and a rim profile was plotted.Cam hips were shallower than normal hips, which in turn were shallower than pincer hips (84 degrees +/- 5 degrees versus 87 degrees +/- 4 degrees versus 96 degrees +/- 5 degrees, respectively). The rim planes of cam, normal, and pincer hips had similar version (23 degrees, 24 degrees, 25 degrees), but females were 4 degrees more anteverted than males.We concluded cam and pincer hips are distinct pathoanatomic entities. Cam hips are slightly shallower than normal, whereas pincers are deeper.Before performing surgery for cam-type femoroacetabular impingement, surgeons should consider measuring the acetabular depth. The cam acetabulum is shallower than normal and may be rendered pathologically shallow by acetabular rim resection leading to early joint failure.