Search

Femoral bone quality is a major risk factor of periprosthetic fracture after total hip arthroplasty (THA), which has mortality similar to native hip fractures but higher short-term morbidity. The goal of this study was to quantify cortical strains at the site of expected Vancouver Type-B periprosthetic fracture as a function of bone mineral density, femoral stem material, and fixation method using a series of 29 autopsy-retrieved, clinically asymptomatic hip joints with THA. Periprosthetic bone mineral content and density was assessed using dual-energy X-ray absorptiometry by Gruen Zone. Specimens then underwent combined cyclic axial and torsional loading, increasing incrementally from 100 N and ±1 Nm to peaks of 700 N and ±5 Nm. All specimens experienced significantly higher strains on the lateral surface than on the anterior surface, indicating that the bending loads in the frontal plane, rather than axial/torsional loads, had the predominant effect. Multiple significant relationships (p = 0.04, p = 0.02) were found between predicted periprosthetic strains calculated from radiographic measurements and observed principal strains. Though THA in the present study were in successful clinical service, the produced results indicated that some femurs with rigid cemented or noncemented implants were potentially at high risk for Vancouver Type-B fractures, which may be predicted radiographically.

Chondrosarcomas of the hand are rare. They are slow-growing tumors that are locally aggressive but rarely metastasize. Patients present with pain and progressive swelling. Radiographs can show lytic lesions with cortical destruction and an associated soft tissue mass. Treatment options are controversial, though it is reasonable to attempt function-sparing reconstruction with close monitoring in some patients.

In response to prior violations of ethical treatment of human subjects in research, institutions and regulations have been established in order to protect the rights of human subjects who participate in biomedical research.

Hip resurfacing arthroplasty (HRA) has a long clinical history and has utilized a variety of bearing material combinations with mixed clinical success. This paper reviews the local and systemic consequences of metal-on-metal hip resurfacing implants. Local tissue reactions cover a spectrum from no clinically adverse effects to adverse complications leading to revision associated with pain, osteolysis, or pseudotumor formation. Factors affecting the local tissue response to any implant include surgical, implant and patient factors. Metal particle size, shape and volume are important to the response around metal-on-metal implants. Surgical placement, particularly of the acetabular component, is important to the generation of wear debris. The number of patients with a sensitivity to the cobalt or chromium constituents of metal-on-metal implants is thought to be low and the cause and effect between patient sensitivity and implant failure is considered to be uncertain. Systemic toxicity from chronic exposure to the ions from metal-on-metal implants is still extremely rare although studies into potential cardiac or neurologic effects have suggested that subtle changes may be present that warrant continued and larger follow-up studies of longer-term cohorts.

The iliotibial band (ITB) is used in anterior cruciate ligament (ACL) reconstruction in skeletally immature patients as well as several other orthopedic reconstructions. The purpose of this study is to determine the size of the ITB as an autograft option in ACL reconstruction surgery or other orthopedic soft tissue reconstructions. Five adult cadavers resulting in nine ITB were used. Thickness and width of the ITB were determined. Using ITB width of 15–60 mm, single and doubled graft sizes were determined using standard surgical graft size technique. Geometric calculations based on average graft thickness were used to mathematically confirm the graft size of the ITB. The ITB is less than 1 mm in thickness in males and females. Cadaveric measurements were less than 1 mm larger than mathematical measurements, in majority of measurements. ITB autograft can be harvested to a maximum 9 mm single-stranded graft or > 12 mm doubled graft. A minimum of 50 mm of ITB width is required to make a 8 mm graft. ITB is a versatile graft that can be used for a graft size up to 9 mm single strand and over 12 mm double strand. A minimum of 50 mm width of ITB is required to obtain a 8 mm-diameter autograft. To ensure appropriate graft size, surgeons should consider harvesting the maximum amount of ITB when performing ACL reconstructions in skeletally immature patients. Surgeons have a quick reference for the width of ITB they should harvest based on the size of graft they require for a successful surgery.

The management of glenohumeral osteoarthritis is difficult in young, active individuals. After nonoperative management fails, arthroscopic debridement with concomitant procedures (eg, loose body removal, capsular release, labral debridement, synovectomy, osteophyte resection, bursectomy, subacromial decompression, microfracture, and biceps tenotomy or tenodesis) to address potential pain generators may be an option in small, contained, unipolar lesions.

Highly cross-linked polyethylene (XLPE) has improved wear properties. This study reports the results of a small series of patients treated over 10 years ago with a metal-on-XLPE hip resurfacing. A total of 21 hips in 20 patients received a hip resurfacing with a cobalt-chromium metal femoral head and metal-backed acetabular cup lined with a XLPE insert and were retrospectively studied. Kaplan-Meier Survivorship was calculated. Five patients who had initial extreme cystic disease in the femoral head failed due to femoral loosening. Survivorship was 95.2% at 5 years and 81.0% at 10 years. We found that XLPE wear was not implicated in these failures, which were primarily attributed to poor bone quality of the femoral head, early bone preparation, cementing technique and excessive head reaming to near the neck diameter, necessitated for the implantation of a thick two-part socket.

Background The Iliotibial Band (ITB) is used as a primary ACL reconstruction in skeletally immature patients and as autograft during other orthopedic reconstructions. The size of the ITB as a single and doubled graft is unknown. Methods Nine adult cadaveric ITB were used to determine the size of the ITB as a single and doubled graft. Thickness and width of the ITB were determined. In decreasing 5 mm measurements, single and double graft sizes were determined using standard surgical graft size technique. Geometric calculations based on average graft thickness were used to mathematically confirm the graft size of the ITB. Results The ITB is less than 1 mm in thickness in males and females. Cadaveric measurements were less than 1 mm larger than mathematical measurements, in majority of measurements. In adults, ITB autograft can be harvested to a maximum 9 mm single stranded graft or >12 mm doubled graft. A minimum of 50 mm of ITB width is required to make a 8 mm graft. Conclusions ITB is a versatile graft that can be considered when a large amount autograft tissue is required. Partial vs whole width ITB should be considered based on patient age, graft size desired, and technical requirements of the graft. Clinical Relevance Surgeons have a quick reference for the width of ITB they should harvest based on the size of graft they require for a successful surgery.

This article determines the incidence and cause of the complications commonly associated with metal-on-metal hip resurfacing implants and the proposed methods to prevent these complications. The literature available in PubMed was reviewed. Complication rates after hip resurfacing are low, and the procedure has shown both safety and efficacy in the hands of surgeons trained in specialized centers. Proper surgical technique can further reduce the incidence of femoral neck fracture, component loosening, and abnormal wear of the prosthesis. A more systematic detection of adverse local tissue reactions is needed to provide accurate assessments of their prevalence.

Narrowing of the femoral neck after metal-on-metal hip resurfacing arthoplasty has been reported as a common radiologic feature, although its significance is still unknown. This study reports the presence and significance of neck narrowing in the first 500 consecutive Conserve® Plus metal-on-metal hip resurfacings in 431 patients.

Background Pseudotumor-like periprosthetic tissue reactions around metal-on-metal (M-M) hip replacements can cause pain and lead to revision surgery. The cause of these reactions is not well understood but could be due to excessive wear, or metal hypersensitivity or an as-yet unknown cause. The tissue features may help distinguish reactions to high wear from those with suspected metal hypersensitivity. Questions/purposes We therefore examined the synovial lining integrity, inflammatory cell infiltrates, tissue organization, necrosis and metal wear particles of pseudotumor-like tissues from M-M hips revised for suspected high wear related and suspected metal hypersensitivity causes. Methods Tissue samples from 32 revised hip replacements with pseudotumor-like reactions were studied. A 10-point histological score was used to rank the degree of aseptic lymphocytic vasculitis-associated lesions (ALVAL) by examination of synovial lining integrity, inflammatory cell infiltrates, and tissue organization. Lymphocytes, macrophages, plasma cells, giant cells, necrosis and metal wear particles were semiquantitatively rated. Implant wear was measured with a coordinate measuring machine. The cases were divided into those suspected of having high wear and those suspected of having metal hypersensitivity based on clinical, radiographic and retrieval findings. The Mann-Whitney test was used to compare the histological features in these two groups. Results The tissues from patients revised for suspected high wear had a lower ALVAL score, fewer lymphocytes, but more macrophages and metal particles than those tissues from hips revised for pain and suspected metal hypersensitivity. The highest ALVAL scores occurred in patients who were revised for pain and suspected metal hypersensitivity. Component wear was lower in that group. Conclusions Pseudotumor-like reactions can be caused by high wear, but may also occur around implants with low wear, likely because of a metal hypersensitivity reaction. Histologic features including synovial integrity, inflammatory cell infiltrates, tissue organization, and metal particles may help differentiate these causes. Clinical Relevance Painful hips with periprosthetic masses may be caused by high wear, but if this can be ruled out, metal hypersensitivity should be considered.

Background Metal-on-metal hip resurfacing (MOMHR) is an alternative to total hip replacement in young and active patients but little is known about the evolution of clinical outcome scores of hip resurfacing over time. The purpose of this study was 1) to assess the long-term evolution of UCLA hip scores and SF-12 Quality of life evaluations in a group of patients treated with hip resurfacing arthroplasty, 2) to determine whether the age of the patient at surgery influenced these outcome measurements, and 3) whether the changes in SF-12 scores are comparable with those of the general US population. Patient and Methods A total of 100 patients with unilateral, unrevised, Charnley class A MOMHR were retrospectively selected for the study. UCLA and SF-12 scores were calculated preoperatively, short-term postoperatively, and beyond 10 years. Results There was a decrease in the UCLA function and activity scores, and in the SF-12 physical scores between the short-term and the last follow-up at a minimum of 10 years. However, pain, walking, and SF-12 mental scores were maintained through the last follow-up. Furthermore, the SF-12 physical scores at last follow-up were comparable with those of the general US population while the mental scores were greater. There were no significant differences between the two age groups at any of the follow-up intervals for any outcome measurement. Conclusions While there is a slight decline in physical function following hip resurfacing over time, pain relief, walking ability, and quality of life are maintained.

Objectives Metal-on-metal hip resurfacing (MOMHR) is available as an alternative option for younger, more active patients. There are failure modes that are unique to MOMHR, which include loosening of the femoral head and fractures of the femoral neck. Previous studies have speculated that changes in the vascularity of the femoral head may contribute to these failure modes. This study compares the survivorship between the standard posterior approach (SPA) and modified posterior approach (MPA) in MOMHR. Methods A retrospective clinical outcomes study was performed examining 351 hips (279 male, 72 female) replaced with Birmingham Hip Resurfacing (BHR, Smith and Nephew, Memphis, Tennessee) in 313 patients with a pre-operative diagnosis of osteoarthritis. The mean follow-up period for the SPA group was 2.8 years (0.1 to 6.1) and for the MPA, 2.2 years (0.03 to 5.2); this difference in follow-up period was statistically significant (p < 0.01). Survival analysis was completed using the Kaplan–Meier method. Results At four years, the Kaplan–Meier survival curve for the SPA was 97.2% and 99.4% for the MPA; this was statistically significant (log-rank; p = 0.036). There were eight failures in the SPA and two in the MPA. There was a 3.5% incidence of femoral head collapse or loosening in the SPA and 0.4% in the MPA, which represented a significant difference (p = 0.041). There was a 1.7% incidence of fractures of the femoral neck in the SPA and none in the MPA (p = 0.108). Conclusion This study found a significant difference in survivorship at four years between the SPA and the MPA (p = 0.036). The clinical outcomes of this study suggest that preserving the vascularity of the femoral neck by using the MPA results in fewer vascular-related failures in MOMHRs. Cite this article: Bone Joint Res 2014;3:150–4

The benefits of using thin acetabular components for hip resurfacing have been shown in terms of bone conservation, but there currently are little data available in the literature addressing the mid-term clinical results of these devices.We aimed to determine whether thinner acetabular components altered mid-term postoperative clinical scores, complication rates, survivorship, radiographic appearance, and metal ion levels.Two hundred eighty-one patients with unilateral disease received a 5-mm thick acetabular shell and 223 received a 3.5-mm shell. The femoral component implanted in both groups was identical. We compared clinical scores, complication rates, survivorship, radiographic results, and ion levels between these two groups.UCLA hip scores were similar (pain, p = 0.0976; walking, p = 0.9571; function, p = 0.9316; activity, p = 0.2085). Complications were higher in the 5-mm group (6.4% versus 1.8%, p = 0.0431). Both groups were similar regarding survivorship (p = 0.3181), cup radiolucency at 5 years (p = 0.107), and metal ion levels (cobalt p = 0.404, chromium p = 0.250).With comparable mid-term clinical results, there is no tangible reason to abstain from using the 3.5-mm acetabular component.Level III, retrospective comparative study. See the Guidelines for Authors for a complete description of levels of evidence.

Second-generation metal-on-metal total hip arthroplasty (THA) was introduced in the early 1990s to address osteolysis and aseptic loosening resulting from polyethylene wear. We present a comparison between the Transcend metal-on-metal and Interseal metal-on-polyethylene THAs. Thirty-seven hips with Transcend metal bearings and 36 hips with Interseal polyethylene acetabular liners but identical acetabular shells were reviewed to determine clinical performance, radiographic changes, and survivorship. Patients with higher anticipated activity levels were selected to receive the Transcend bearing. Mean follow-up time was 107.0 months for the Transcend group, and 90.4 months for the Interseal group. There were no significant differences between the Transcend and Interseal groups for mode of failure and survivorship, which is notable considering the younger and more active Transcend group. However, the Transcend group showed significantly better clinical scores, which may have been a result of the selection methods. Neither surface was differentially implicated in osteolysis, aseptic loosening, or adverse local tissue reaction (ALTR). Our study shows a favorable and comparable performance for both systems.

There have been increasing concerns regarding adverse local tissue reactions (ALTR) following metal-on-metal (MOM) hip arthroplasties. This study examined wear rates in retrievals of one design of MOM resurfacing arthroplasty, and assessed the differences in wear between those with and without ALTR. Wear measurements were made on 39 MOM resurfacing components (30 femoral, 9 acetabular) which were at least 2years in vivo . Seven hips (6 patients; 4 acetabular components, 7 femoral components) were identified to have ALTR. Acetabular component abduction and anteversion angles were determined using EBRA, and the contact-patch-to-rim (CPR) distance was calculated. The ALTR group had higher linear femoral and acetabular wear rates, acetabular anteversion and abduction angles, lower CPR, and longer time to revision. Given the increased risk for ALTR associated with acetabular component malpositioning, patients with malpositioned acetabular components may require closer clinical follow-up and monitoring.

The results of metal-on-metal hip Conserve® Plus resurfacings with up to 14 years of follow-up with and without risk factors of small component size and/or large femoral defects were compared as performed with either first- or second-generation surgical techniques. There was a 99.7% survivorship at ten years for ideal hips (large components and small defects) and a 95.3% survivorship for hips with risk factors optimized technique has measurably improved durability in patients with risk factors at the 8-year mark. The lessons learned can help offset the observed learning curve of resurfacing.

Metal-on-metal total hip replacements (THRs) and hip resurfacings are coming under increasing scrutiny in light of concerns that they fail because of high wear and elevated metal ions. The aim of this study was to investigate the modes of failure in a collection of 433 metal-on-metal THRs and hip resurfacings and to examine the correlations between the reasons for revision and a range of patient and implant variables considered relevant to implant wear.