Search

To assess, in vitro, variables potentially influencing implant blooming using a human-like imaging phantom and 3D-printed mandibles.Sixty implants were inserted in 3D-printed mandibles in 26 different configurations in order to examine the impact of implant diameter, presence of a cover screw, implant design/material, implant position, and the presence of additional implants on implant blooming using two cone-beam computed tomography (CBCT) devices (Accuitomo [ACC] and NewTom [NWT]). Two observers measured the amount of implant blooming in both buccolingual and mesiodistal directions. Inter-rater agreement and descriptive statistics, grouped by implant characteristic and CBCT device, were calculated.Both CBCT devices increased implant diameter (a mean increase of 9.2% and 11.8% for titanium, 20.3% and 24.4% for zirconium, for ACC and NWT, respectively). An increase in implant diameter did not increase the amount of blooming, whereas placing a cover screw did (from 8.0% to 10.9% for ACC, and from 10.0% to 15.6% for NWT). Moreover, implant design, anatomical region, and the presence of another implant also affected the extent of the blooming.Dental implants show a clear diameter increase on CBCT, with the effect being more pronounced for zirconium than for titanium implants. Similar effects are likely to occur in the clinical setting, potentially masking nonosseointegration, reducing the dimensions of peri-implant defects, and/or causing underestimation of the buccal bone thickness.

The aim of this study was to evaluate the foraminal enlargement and its influence on microcrack formation and apical transportation in root canals with apical curvature. Eighteen maxillary lateral incisors with apical curvature were selected by using micro-CT images. Root canals were randomly divided in two groups (n = 9) according to root canal preparation using two working lengths: 1 mm short of the apical foramen (control group) and 1 mm beyond the apical foramen (foraminal enlargement). For both groups Reciproc Blue R40 was used for root canal instrumentation. Specimens were scanned by nano-CT (UniTOM HR) before and after root canal preparation. Percentage, length, and width of microcracks, and apical transportation were assessed. Kappa, chi‐square and McNemar tests were used for qualitative analyses while paired and unpaired t-test were used for quantitative analyses (α = 0.05). For both groups, rather similar and low percentages of microcracks were observed before root canal preparation (P > 0.05). The foraminal enlargement promoted new microcracks, not observed in the control group. An increase in microcrack length was observed when the foraminal enlargement was performed (P

To validate in vitro the accuracy of a novel method for bone augmentation of horizontal alveolar bone defects with the help of a surgical guide.Six cone-beam computed tomography scans of patients requiring horizontal bone augmentation were segmented and 3D printed. Two surgeons performed the bone augmentation surgery twice for each case on 3D-printed models, using either a conventional or guided protocol. Each surgeon virtually planned the desired graft shape beforehand. The resulting grafts were compared linearly and volumetrically to the plan; graft density and surgical time were also analyzed.There was significantly less graft volume outside the planned volume with the guided protocol (36.8% ± 14.1 vs. 19.6% ± 12.3, p .01). The use of a guide increased graft accuracy at several measurement points, resulting in less overfill when using the guided protocol (1.7 ± 1.7 mm at the most coronal point, 0.2 mm ± 1.4 at 25%, 0.0 mm ± 0.9 at 50%, 0.1 mm ± 1.1 at 75%, and 0.4 mm ± 1.4 apically). Graft thickness was increased 1 mm coronally from the planned graft (2.8 mm ± 2.3 vs. 1.8 mm ± 2.2, p = .04). Surgical time increased significantly when using a guide (a difference of 2 m 26 s).The technique, tested here in vitro, allows surgeons to improve the accuracy of the resulting graft shape, to better compact material in the coronal portion of the graft, and to reduce the amount of graft material placed outside the planned volume.

OBJECTIVE: The objectives of this study were to assess observers' preference for standard screens (SSs) or medical displays (MDs) in visualizing difficult-to-diagnose radiographic dental abnormalities and their preference for dental filter tools when utilized with MD systems. STUDY DESIGN: A retrospective data set of 60 in vivo radiographs consisting of intraoral (n = 20), panoramic (n = 20), and cone beam computed tomography (n = 20) images was created. Three image display monitors, including an SS, an MD, and an MD with 3 dental filter configurations (bone-low density enhancement filter, tooth-high density enhancement filter, and a combined filter representing regular MD), were utilized to assess 4 observers' monitor preferences in detecting radiographically subtle dental abnormalities. The data were analyzed by using binomial distribution. A P value ≤.05 was considered statistically significant. RESULTS: Although observers expressed preference for MD for visualizing some abnormalities when examining intraoral and panoramic radiographs, MD was not preferred for detection of any abnormalities with cone beam computed tomography. There were no significant differences in preference for SS or MD overall (P ≥ .2024). Observers expressed significant preference for the filters in visualizing all but 2 abnormalities (P ≤ .0252). CONCLUSIONS: The use of MD monitors enabled with dental filter tools may be preferred for visualizing certain subtle abnormalities. ispartof: ORAL SURGERY ORAL MEDICINE ORAL PATHOLOGY ORAL RADIOLOGY vol:132 issue:4 pages:475-482 ispartof: location:United States status: published

The aim of this study was to evaluate CBCT exposure protocols and CBCT devices for the detection of cracks and fine endodontic structures using 3 conditions of metallic artifacts. An anthropomorphic phantom containing teeth with cracks, isthmus, narrow canal, and apical delta was scanned using ten CBCT devices. A reference industrial CT image was used to detect and measure all structures. Three conditions were created: 1. metal-free, 2. ‘endo’ and 3.‘implant’ with metallic objects placed next to those teeth. For each condition, three protocols were selected: medium field of view (FOV) standard resolution, small FOV standard, and high resolution. As results, only small FOV high-resolution metal-free images from two devices (A and H) were appropriate to visualize cracks. For fine structure identification, the best result was observed for small FOV high resolution. However, the visualization significantly worsened in the presence of a metallic artefacts. The ability of CBCT images for visualizing cracks is restricted to certain CBCT devices. Once metallic artefacts are present, crack detection becomes unlikely. Overall, small FOV high-resolution protocols may allow identification of fine endodontic structures as long as there are no high-dense objects in the region of interest.

OBJECTIVES: This study aimed to describe and compare CBCT imaging prescription in clinical practice among orthodontists from five countries in Europe and America. Additionally, it investigated factors associated with the prescribing and the use of guidelines for CBCT imaging. MATERIALS AND METHODS: A cross-sectional survey was carried out using an online questionnaire sent to all registered orthodontists in Belgium, Brazil, Canada, Romania, and the United States of America (USA). The data were analyzed by descriptive statistics, bivariate tests, and Poisson regression. RESULTS: The final sample consisted of 1284 participants. CBCT was prescribed by 84.4% of the participants for selected cases (84.9%), mainly for impacted teeth (92.4%), presurgical planning (54.1%), and root resorption (51.9%). High cost was most frequently the limiting factor for CBCT prescription (55.4%). Only 45.2% of those who were using CBCT imaging reported adhering to guidelines. CBCT imaging prescription was associated with the orthodontists’ countries (p < .009, except for Belgium, p = .068), while the use of guidelines was associated with the respondents’ country and additional training on CBCT imaging (p < .001). CONCLUSIONS: Orthodontists refer patients for CBCT for selected indications (impacted teeth, root resorption, presurgical planning, dentofacial deformities, as suggested by the international guidelines, and also for upper airway and temporomandibular joint evaluation). Many do not adhere to specific guidelines. There are substantial variations between the countries about the orthodontists’ referral for CBCT and guideline usage, irrespective of gender. CBCT prescription may be limited by financial barriers, adhering to specific guidelines and prior CBCT training. CLINICAL RELEVANCE: CBCT prescription among orthodontists must be based on prescription criteria and current guidelines. It is advised to improve CBCT education and training to enhance CBCT selection, referral, analysis, and interpretation in orthodontic practice.

OBJECTIVES: The overall objective of this study was to assess how metal artefacts impact image quality of 13 CBCT devices. As a secondary objective, the influence of scanning protocols and field of view on CBCT image quality with and without metal artefacts was also assessed.MATERIALS AND METHODS: CBCT images were acquired of a dry human skull phantom considering three clinical simulated conditions: one without metal and two with metallic materials (metallic pin and implant). An industrial micro-CT was used as a reference to register the CBCT images. Afterwards, four observers evaluated 306 representative image slices from 13 devices, ranking them from best to worst. Furthermore, within each device, medium FOV and small FOV standard images were compared. General linear mixed models were used to assess subjective perception of examiners on overall image quality in the absence and presence of metal-related artefacts (p RESULTS: Image quality perception significantly differed amongst CBCT devices (p CONCLUSIONS: Subjective image quality differs significantly amongst CBCT devices and scanning protocols. Metal-related artefacts may highly impact image quality, with a significant device-dependent variability and only few scanners being more robust against metal artefacts. Often, metal artefact expression may be somewhat reduced by proper protocol selection.CLINICAL RELEVANCE: Metallic objects may severely impact image quality in several CBCT devices.

OBJECTIVE: The aim of this study was to assess observers' preference for a dentomaxillofacial dedicated medical display (MD) vs a general-purpose standard screen (SS) for in vitro and in vivo observation of normal radioanatomic features. STUDY DESIGN: The in vitro sample consisted of 2-dimensional (2-D) intraoral (n = 15), panoramic (n = 2), cephalometric (n = 2), and 3-dimensional (3-D) cone beam computed tomography (CBCT) (n = 9) data sets, acquired by utilizing commercially available skull and head-and-neck phantoms. The in vivo sample consisted of 80 radiographs (intraoral = 20; panoramic = 20; cephalometric = 20; and CBCT = 20). In vitro and in vivo data sets were both acquired by using Minray, Promax2-D, and Vistapano Ceph for 2-D images and Accuitomo, NewTom VGi evo, and Promax3-D for CBCT images. Five observers entered screen preferences when evaluating the appearance of radioanatomic structures on MD and SS. RESULTS: Both in vitro and in vivo assessments showed good interobserver and excellent intraobserver agreement. In vitro data suggested a significant preference for MD over SS for viewing radioanatomic features on panoramic and CBCT images, whereas MD was significantly preferred for in vivo images of all imaging modalities (P < .001). CONCLUSIONS: Overall, observers preferred MD over SS for both in vitro and in vivo observation of normal radioanatomic features irrespective of the imaging modality. ispartof: ORAL SURGERY ORAL MEDICINE ORAL PATHOLOGY ORAL RADIOLOGY vol:130 issue:2 pages:217-224 ispartof: location:United States status: published

To verify whether mandibular cortical analyses accurately distinguish postmenopausal women with normal bone mineral density (BMD) from women with osteoporosis by means of a cone-beam computed tomography (CBCT)–driven composite osteoporosis index (three-dimensional mandibular osteoporosis index—3D MOI). The comparison was performed between 52 women with normal BMD and 51 women with osteoporosis according to dual-energy X-ray absorptiometry (DXA) examination of the lumbar spine and hip. Mandibular cortical width (MCW) and cortical quality were evaluated on cross-sectional and panoramic reconstructed images. ANOVA, ROC curves and accuracy measurements were used for statistical analyses, as well as a predictive model combining the quantitative and qualitative analyses and age. All CBCT-driven measurements presented good to moderate intra- and interobserver agreements. MCW values were significantly lower in women with osteoporosis. Postmenopausal women with osteoporosis were 8 times more likely to have the cortex classified as C3, and 2.4 times more likely to have MCW thinner than 2.75 mm. The area under the ROC curve was 0.8 for the predictive model. The newly developed 3D MOI enables distinguishing women with osteoporosis from those with normal BMD with good sensitivity and specificity. Whenever a CBCT scan is performed for specific clinical indications, a 3D MOI may be performed to qualitatively and quantitatively assess the condition of the mandibular cortex. This may be surely helpful to assess the osteoporosis status in the ageing population and more specifically in peri- or postmenopausal women.

An accurate three-dimensional (3D) segmentation of the maxillary sinus is crucial for multiple diagnostic and treatment applications. Yet, it is challenging and time-consuming when manually performed on a cone-beam computed tomography (CBCT) dataset. Recently, convolutional neural networks (CNNs) have proven to provide excellent performance in the field of 3D image analysis. Hence, this study developed and validated a novel automated CNN-based methodology for the segmentation of maxillary sinus using CBCT images. A dataset of 264 sinuses were acquired from 2 CBCT devices and randomly divided into 3 subsets: training, validation, and testing. A 3D U-Net architecture CNN model was developed and compared to semi-automatic segmentation in terms of time, accuracy, and consistency. The average time was significantly reduced (p-value

Background The purpose of this study was to objectively assess dimensional alteration (blooming artefact) on dental implant using 13 cone-beam computed tomography (CBCT) devices adjusted to device-specific scanning protocols and to assess whether subjective adjustment of brightness and contrast (B&C) could alter its visualization. Methods An anthropomorphic phantom containing a dental implant was scanned in 13 CBCT devices adjusted to three scanning protocols: medium-FOV standard resolution, small-FOV standard resolution, and small-FOV high resolution. The diameter of the implant was measured at five levels, averaged, and compared with those from a reference standard industrial CT image. B&C adjustments were performed and measurements were repeated. The intraclass correlation coefficient assessed the reliability of the measurements and general linear mixed models were applied for multiples comparisons at a 95% confidence interval. Results Implant diameter obtained from small-FOV high-resolution protocols in most CBCT devices was not significantly different when compared to that from the reference (p > 0.05). For standard protocols, significant dimensional alteration of the implant ranging from 23 to 34% (0.67 to 1.02 mm) was observed in 9 CBCT devices for small-FOV scanning (p < 0.05), and in 8 CBCT devices for medium-FOV scanning, implant dimensional alteration ranged significantly from 21 to 35% (0.62 to 1.04 mm). After B&C adjustments, dimensional alteration was reduced for several of the CBCT devices tested (p < 0.05). Conclusions The visualization of the implant dimensional alteration differed between CBCT devices and scanning protocols with an increase in diameter ranging from 0.27 to 1.04 mm. For most CBCT devices, B&C adjustments allowed to reduce visualization of implant blooming.

The present study aimed to compare the filled volume by gutta-percha and sealer in the apical region of the main canal and ramifications, after instrumentation at two different working lengths using nano-computed tomography (nano-CT). Twenty-two premolars with apical ramifications were selected after micro-computed tomography evaluation and were randomly divided into groups for further endodontic instrumentation at two different working lengths: G1 - Root canals shaped 1 mm short of the apical foramen (n=11), and G2 - Root canals shaped at the apical foramen (n=11). After completing root treatment, nano-CT images were acquired, and the filled volume by gutta-percha and sealer in the main canal apical 0-4 mm and 0-1 mm ranges, and apical ramifications were objectively measured by an operator specialized in both radiology and endodontics, blinded for both groups. The Mann-Whitney test was applied to compare both groups regarding the filling of the main canal apical ranges and apical ramifications with a significance level of 5% (α ≤ 0.05). It was observed that root canals shaped at the apical foramen had a larger volume of the main canal filled than root canals shaped 1 mm short of the apical foramen, at both apical ranges (0-4 and 0-1 mm) (p0.05). In conclusion, the root canals shaped at apical foramen exhibited increased filling volume of the main canal in the apical region. However, neither of both working lengths influenced filling of the apical ramifications. ispartof: Brazilian Dental Journal vol:33 issue:3 ispartof: location:Brazil status: Published online

Made available in DSpace on 2021-06-25T15:06:17Z (GMT). No. of bitstreams: 0 Previous issue date: 2021-06-01 Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES) Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP) Fundacao de Apoio a Pesquisa do Distrito Federal European Union Horizon 2020 Research and Innovation Programme under the Marie Sklodowska-Curie grant Aarhus University Research Foundation (AIAS-COFUND) Introduction: The purpose of this study was to classify 10 cone-beam computed tomographic (CBCT) devices using a ranking model according to the detection of fine endodontic structures. Methods: A dedicated dentate anthropomorphic phantom was scanned 2 times using 10 CBCT devices without any metal (metal-free condition) and with an endodontically treated tooth containing a metallic post (metal condition). A reference image acquired on an industrial micro-CT scanner was used to register all CBCT images, yielding corresponding anatomic slices. Afterward, 3 experienced observers assessed all acquired CBCT images for their ability to assess a narrow canal, isthmus, and apical delta ramification using a categoric rank from 1 (best) to 10 (worst). Fleiss kappa statistics were used to calculate intra-and interobserver agreements for each CBCT device separately. Based on the observers' scores, general linear mixed models were applied to compare image quality among different CBCT devices for performing endodontic diagnostic tasks (a 5 .05). Results: The 10 CBCT devices performed differently for the evaluated endodontic tasks (P , .05), with 3 devices performing better for endodontic feature detection. Yet, in the presence of metal, only 2 devices were able to keep a high level of endodontic feature detection. Conclusions: The evaluated endodontic tasks were CBCT device dependent, and their detection was influenced by the presence of metal. (J Endod 2021;47:947-953.) Sao Paulo State Univ, Sch Dent, Dept Restorat Dent, Araraquara, SP, Brazil Katholieke Univ Leuven, OMFS IMPATH Res Grp, Dept Imaging & Pathol, Fac Med, Leuven, Belgium Univ Hosp Leuven, Oral & Maxillofacial Surg, Leuven, Belgium Univ Estadual Campinas, Piracicaba Dent Sch, Div Oral Radiol, Dept Oral Diag, Piracicaba, SP, Brazil Univ Brasilia, Dept Dent, Fac Hlth Sci, Brasilia, DF, Brazil Aarhus Univ, Aarhus Inst Adv Studies, Aarhus, Denmark Katholieke Univ Leuven, Dept Mech Engn, Leuven, Belgium Karolinska Inst, Dept Dent Med, Stockholm, Sweden Sao Paulo State Univ, Sch Dent, Dept Restorat Dent, Araraquara, SP, Brazil CAPES: 001 FAPESP: 2019/22885-0 Fundacao de Apoio a Pesquisa do Distrito Federal: 23106.013588/2019-5 European Union Horizon 2020 Research and Innovation Programme under the Marie Sklodowska-Curie grant: 754513

To compare radiographic predictors of medication-related osteonecrosis of the jaw in dental extraction sites.Forty-one oncological patients undergoing intravenous or subcutaneous antiresorptive treatment, with a history of dental extraction visualised by panoramic imaging, were included in this retrospective study. Age-, sex- and extracted tooth-matched healthy patients who had previously undergone panoramic imaging were selected as controls (n = 57). A total of 288 extraction sites were independently evaluated by two oral and maxillofacial radiologists, who assessed eight distinct radiographic features. The radiographic features of extraction sites were noted to allow comparison between and within subjects regarding healing and osteonecrosis development. The association between radiographic findings, underlying dental disease and medication-related osteonecrosis of the jaw was also tested. The level of significance was set at 5%.Patients under antiresorptive treatment presented with widening of the periodontal ligament space, thickening of the lamina dura, sclerotic bone pattern, horizontal bone loss and periapical radiolucency with bone reaction (P ≤ 0.05). Development of medication-related osteonecrosis of the jaw was associated with altered bone pattern, angular bone loss, furcation involvement and unsatisfactory endodontic treatment (P ≤ 0.05). An association between medication-related osteonecrosis of the jaw and previous dental disease was also found, particularly for periapical lesions and endodontic-periodontal disease (P ≤ 0.05).Radiographic predictors of further development of medication-related osteonecrosis of the jaw in extraction sites include heterogeneous bone pattern, angular bone loss and furcation involvement. Extraction sites with underlying bony changes related to endodontic and endodontic-periodontal disease are more prone to development of medication-related osteonecrosis of the jaw.

Objectives The aim of this study was to compare the performance of panoramic radiography (PAN), extraoral bitewing radiography (EBW), and cone beam computed tomography (CBCT) in the assessment of mandibular third molars. Study Design PAN and EBW were obtained to visualize 34 third molars. The teeth were evaluated by using PAN and EBW according to their positions, the presence of radiographic signs of proximity of the roots to the mandibular canal, the relationship of the roots to the canal, and the relationship of the second and third molars. Third molar position and root relationship with the canal were also assessed with CBCT. Results PAN and EBW showed significantly closer relationships compared with CBCT between the tooth and the mandibular canal (P ≤ .002). With regard to all other parameters, no differences were seen between PAN and EBW (P ≥ .072), although EBW, in comparison with PAN, showed a decreased overlap between the proximal surfaces of the second and third molars and a greater trend toward approximating root apices and the canal. Conclusions In comparison with PAN, EBW showed a tendency to project the roots closer to the mandibular canal, but there was a decrease in the proximal surfaces overlapping the second molar. The relationship between the third molar and the mandibular canal appeared closer in PAN and EBW than in CBCT.

Objective The aim of this study was to assess the performance of 2 metal artifact reduction (MAR) algorithms in cone beam computed tomography (CBCT) imaging, considering different materials, metal positions, and fields of view (FOVs). Study Design Nine phantoms containing cylinders of amalgam, copper–aluminum (Cu-Al) alloy, and titanium were scanned by using Picasso Trio and ProMax 3D CBCT units with small and medium FOVs. Scans were made with and without MAR algorithms. The standard deviation (SD) of voxel gray values was measured in the neighborhood of the cylinders. Differences in SD were statistically evaluated for effects of MAR and the other parameters, with a significance level of 5%. Results Significant differences between images with MAR and those without MAR for both devices (P ≤ .0001) were observed. Amalgam showed the largest artifact expression, followed by Cu-Al and titanium. After correction, differences remained only in Picasso Trio images (P = .002). Considering positions, no significant difference in the performance of the MAR algorithm was observed in either device. Considering FOVs, significant differences were observed for ProMax 3D (P = .005), with less artifact expression in the medium FOV after MAR correction. Conclusions MAR algorithms were effective for artifact reduction despite variation in performance according to device, FOV, and material properties. The position of the metal cylinder within the FOV had no significant effect.

Objective: This article aims to appraise how scientific evidence related to CBCT has changed over the years, based on levels of evidence and diagnostic efficacy. Methods: A general search strategy was used in different databases (Pubmed, Embase, and Web of Science) to identify systematic reviews (SRs) on CBCT until November of 2020. The SRs included were divided according to different specialties of dentistry. A critical review of the articles was made, describing the level of evidence and efficacy. Results: In total, 75 articles were selected. There was an increase in the number of SRs on CBCT from 2014 onwards, as 83% of the SRs on this topic were published after 2013, and 72% between 2016 and to date. Twenty SRs (27%) performed meta-analysis. Only 28% of the SRs provided a detailed description of CBCT protocols. According to SR evidence, almost all specialties of dentistry have advanced concomitantly with the introduction of CBCT. The majority of SRs were related to clinical applications (level 2 of efficacy), followed by technical parameters (level 1 of efficacy). Only some CBCT models were mentioned in the SRs selected. Conclusion: Over the course of 20 years, SRs related to CBCT applications for a broad range of dental specialties have been published, with the vast majority of studies at levels 1 and 2 of diagnostic efficacy. Not all CBCT models available on the market have been scientifically validated. At all times, one should remain cautious as such not to simply extrapolate in vitro results to the clinical setting. Also, considering the wide variety of CBCT devices and protocols, reported results should not be overstated or generalized, as outcomes often refer to specific CBCT devices and protocols.

Cementoblastomas are rare benign tumours that represent less than 1% of all odontogenic tumours. Complete resection is mandatory to avoid recurrence. This case report describes the contribution of three-dimensional imaging and three-dimensional printing in the pre-operative surgical planning of a large cementoblastoma that not only caused substantial compression on the inferior alveolar and mental nerves, but also caused thinning and partial erosion of the lingual and vestibular cortical bone, thus increasing the risk of pre-operative mandibular fracture. ispartof: BJR CASE REPORTS vol:7 issue:3 ispartof: location:England status: published

Objectives: The aim of this study was to evaluate and summarise features of currently and formerly available cone beam CT (CBCT) devices from 1996 to 2019. Additionally, a recommendation for standardised reporting of CBCT characteristics was provided. Methods and materials: Information about the features of all available CBCT devices was obtained from the manufacturers’ available data. Moreover, site visits to newly developed CBCT machines’ manufacturers were performed in order to obtain relevant information. Results: A total of 279 CBCT models from 47 manufacturers located in 12 countries (Brazil, China, Denmark, Finland, France, Germany, Italy, Japan, Republic of Korea, Slovakia, Thailand, and USA) could be listed. Overall, wide variations in CBCT features and technical specifications were identified. Conclusions: CBCT in dentomaxillofacial radiology is a generic term applicable to a broad range of CBCT machines and features. Experimental outcomes and literature statements regarding radiation doses, imaging performance and diagnostic applicability of dental CBCT cannot be simply transferred from one CBCT model to another considering a wide variation in technical characteristics and clinical diagnostic performance. The information tabulated in the present study will be later provided on the International Association of DentoMaxilloFacial Radiology website ( www.iadmfr.one ).

This critical review discusses the clinical challenges for patient-specific and indication-oriented dentomaxillofacial cone beam computed tomography (CBCT). Large variations among units and protocols may lead to variable degrees of diagnostic and three-dimensional model accuracy, impacting both specific diagnostic tasks and treatment planning. Particular indications, whether diagnostic or therapeutic, may give rise to very specific challenges with regard to CBCT unit and parameter setup, considering the required image quality, segmentation accuracy, and artifact level. Considering that dental materials are in the field of view needed for diagnosis or treatment planning, artifact expression is a dominant factor in proper CBCT selection. The heterogeneity of dental CBCT units and performances may highly impact the scientific results. Thus research findings cannot be simply generalized as published evidence, and a demonstrated clinical applicability for a specific indication should not be simply extrapolated from one CBCT unit to another.

OBJECTIVE: The aim of this study was to quantitatively assess the performance of metal artifact reduction (MAR) algorithms on the volume of metal cylinders, considering the influence of materials, positions, and fields of view (FOVs), by using 3 cone beam computed tomography (CBCT) devices (NewTom VGi evo, Picasso Trio, and ProMax 3-D Max). STUDY DESIGN: Nine phantoms containing cylinders of amalgam, copper-aluminum (CuAl) metal alloy, and titanium, combined in up to 3 positions, were scanned by using 2 different FOVs. MATLAB software was used to evaluate the differences between volumes before and after MAR application, and the possible interference of materials, positions, and FOVs. Wilcoxon's test and the Kruskal-Wallis test were used at a level of significance of 5%. RESULTS: In general, images containing amalgam and CuAl showed a significant difference in volume before and after MAR application. However, no significant difference after MAR was observed (P > .05) relative to positions and FOVs. MAR had an impact on the cylinder volumes only in the NewTom VGi evo and ProMax 3-D Max scanners. CONCLUSIONS: The performance of MAR algorithms in volume correction of metal objects is dependent on the materials and the CBCT unit. ispartof: ORAL SURGERY ORAL MEDICINE ORAL PATHOLOGY ORAL RADIOLOGY vol:130 issue:3 pages:328-335 ispartof: location:United States status: published

OBJECTIVES: This study investigated the impact of micro-computed tomography (micro-CT)-based voxel size on the analysis of material/dentin interface voids and thickness of different endodontic cements. MATERIALS AND METHODS: Following root-end resection and apical preparation, maxillary premolars were filled with mineral trioxide aggregate (MTA), Biodentine, and intermediate restorative material (IRM) (n = 24). The samples were scanned using micro-CT (SkyScan 1272; Bruker) and the cement/dentin interface and thickness of materials were evaluated at voxel sizes of 5, 10, and 20 µm. Analysis of variance and the Tukey test were conducted, and the degree of agreement between different voxel sizes was evaluated using the Bland and Altman method (p < 0.05). RESULTS: All materials showed an increase in thickness from 5 to 10 and 20 µm (p < 0.05). When evaluating the interface voids, materials were similar at 5 µm (p > 0.05), while at 10 and 20 µm Biodentine showed the lowest percentage of voids (p < 0.05). A decrease in the interface voids was observed for MTA and IRM at 20 µm, while Biodentine showed differences among all voxel sizes (p < 0.05). The Bland-Altman plots for comparisons among voxel sizes showed the largest deviations when comparing images between 5 and 20 µm. CONCLUSIONS: Voxel size had an impact on the micro-CT evaluation of thickness and interface voids of endodontic materials. All cements exhibited an increase in thickness and a decrease in the void percentage as the voxel size increased, especially when evaluating images at 20 µm. ispartof: Restor Dent Endod vol:47 issue:1 pages:e2- ispartof: location:Korea (South) status: Published online

Made available in DSpace on 2020-12-12T01:30:00Z (GMT). No. of bitstreams: 0 Previous issue date: 2020-06-01 Purpose: The aim of this study was to evaluate the influence of voxel size and different post-processing algorithms on the analysis of dental materials using micro-computed tomography (micro-CT). Materials and Methods: Root-end cavities were prepared in extracted maxillary premolars, filled with mineral trioxide aggregate (MTA), Biodentine, and Intermediate Restorative Material (IRM), and scanned using micro-CT. The volume and porosity of materials were evaluated and compared using voxel sizes of 5, 10, and 20 μm, as well as different software tools (post-processing algorithms). The CTAn or MeVisLab/Materialise 3-matic software package was used to perform volume and morphological analyses, and the CTAn or MeVisLab/Amira software was used to evaluate porosity. Data were analyzed using 1-way ANOVA and the Tukey test (P

OBJECTIVE: To attempt defining differential radiographic diagnostic characteristics for osteonecrotic lesions using 2D as opposed to 3D images. MATERIALS AND METHODS: This was a cross-sectional study. Subjects presenting mandibular osteonecrotic lesions (osteomyelitis, osteoradionecrosis, and medication-related osteonecrosis of the jaws) were selected and compared to a group of age- and gender-matched controls, all having both cone-beam computed tomographic images (CBCT) and panoramic radiographs (PANO). Both imaging modalities (predictor variables) were evaluated by two radiologists that scored lesion presence, eight additional radiological features, and a composite severity index (outcome variables). For each pathologic condition, characteristic features were assessed in PANO and CBCT by the Wilcoxon signed-rank test. Regression tree analysis revealed the predictive value of PANO and CBCT (α = 5%). RESULTS: Overall, the predictive value of PANO reached 74%, while for CBCT it became 90%. Regarding the composite severity index, CBCT enabled to detect more subtle lesions. Also, CBCT imaging allowed showing more distinct radiographic diagnostic features as compared to PANO imaging, more specifically when distinguishing osteomyelitis from both other lesions. CONCLUSIONS: Cone-beam computed tomography enabled showing more differences in radiological features between distinct osteonecrosis disease entities. CBCT imaging might be a better contributor for the detection of early lesions and to monitor further pathological developments in the mandible. ispartof: ORAL DISEASES vol:27 issue:2 pages:312-319 ispartof: location:Denmark status: published

Objectives: Three-dimensional models of mandibular condyles provide a way for condylar remodeling follow-up. The overall aim was to develop and validate a user-friendly workflow for cone beam CT (CBCT)-based semi-automatic condylar registration and segmentation. Methods: A rigid voxel-based registration (VBR) technique for registration of two post-operative CBCT-scans was tested. Two modified mandibular rami, with or without gonial angle, were investigated as the volume of interest for registration. Inter- and intraoperator reproducibility of this technique was tested on 10 mandibular rami of orthognathic patients by means of intraclass correlation coefficients (ICC’s) and descriptive statistics of the transformation values from the VBR. The difference in reproducibility between the two modified rami was evaluated using a paired t-test (p < 0.05). For the segmentation, eight fresh frozen cadaver heads were scanned with CBCT and micro-CT. These data were used to test the inter- and intraoperator reproducibility (ICC’s) and accuracy (Bland–Altman plot) of a newly designed workflow based on semi-automated contour enhancement. Results: Excellent ICC’s (0.94–0.99) were obtained for the voxel-based registration technique using both modified rami. If the gonial angle was not included in the volume of interest, there was a trend of increased operator error suggested by significant higher interoperator differences in translation values (p = 0,0036). The segmentation workflow proved to be highly reproducible with excellent ICC’s (0.99), low absolute mean volume differences between operators (23.19 mm3), within operators (28.93 mm3) and low surface distances between models of different operators (Conclusions: This study provides a validated user-friendly and reproducible method of creating three-dimensional-surface models of mandibular condyles out of longitudinal CBCT-scans.

While several materials and techniques have been used to assess the quality of root canal fillings in micro-CT images, the lack of standardization in scanning protocols has produced conflicting results. Hence, the aim of this study was to determine a cutoff voxel size value for the assessment of root canal filling voids in micro-CT and nano-CT images. Twenty freshly extracted mandibular central incisors were used. Root canals were prepared with nickel titanium files to an ISO size 40/0.06 taper and then filled with a single cone (40/0.06 taper) and AH Plus sealer. The teeth were scanned with different voxel sizes with either micro-CT (5.2, 8.1, 11.2, and 16.73 μm) or nano-CT (1.5 and 5.0 μm) equipment. Images were reconstructed and analyzed with the NRecon and CTAn software. Void proportion and void volume were calculated for each tooth in the apical, middle, and coronal thirds of the root canal. Kruskal-Wallis and post hoc Mann–Whitney U tests were performed with a significance level of 5%. In micro-CT images, significantly different results were detected among the tested voxel sizes for void proportion and void volume, whereas no such differences were found in nano-CT images (p>0.05). Micro-CT images showed higher void numbers over the entire root length, with statistically significant differences between the voxel size of 16.73 μm and the other sizes (p<0.05). The values of the different nano-CT voxel sizes did not significantly differ from those of the micro-CT (5.2, 8.1, and 11.2 μm), except for the voxel size of 16.73 μm (p<0.05). All tested voxel sizes enabled the detection of root canal filling voids except for the voxel size of 16.73 μm. Bearing in mind the limitations of this study, it seems that a voxel size of 11.2 μm can be used as a reliable cutoff value for the assessment of root canal filling voids in micro-CT imaging.

X-ray microtomography (microCT) is a nondestructive technique used to assess bone morphometry. For an accurate analysis, it is necessary to segment the bone tissue from the background images, avoiding under- or overestimation of the real bone volume. Thus, segmentation methods for microCT can influence the accuracy of bone morphometry analysis. The purpose of this study was to compare two different image segmentation methods available on microCT software (subjective and objective) regarding to the human bone morphometric analysis. Sixteen samples containing a fixation screws covered by 0.5-1mm of bone were scanned using the SkyScan 1173 scanner. Three examiners segmented the microCT images subjectively and recorded the threshold values. Subsequently, an objective segmentation was also done. The 3D analysis was performed for both images using the values previously determined in CTAn software. Five bone morphometric parameters were calculated (BV/TV, Tb.Th, Tb.N, Tb.Sp, Conn.Den) and used as dependent variables. ANOVA showed no significant differences between the methods concerning BV/TV (p=0.424), Tb.N (p=0.672), Tb.Th (p=0.183), Tb.Sp (p=0.973) and Conn.Den (p=0.204). Intra- and interobserver agreement ranged from satisfactory to excellent (0.55-1 and 0.546-0.991, respectively). Therefore, results obtained with subjective threshorlding were similar to those obtained with objective segmentation. Since objective segmentation does not have human input and it is a truly objective method, it should be the first choice in microCT studies that concern homogeneity and high resolution human bone sample. Resumo A microtomografia computadorizada (microTC) é uma modalidade de imagem não destrutiva utilizada para avaliar a morfometria óssea. Para análise acurada, faz-se necessário segmentar o tecido ósseo do fundo (background) da imagem, evitando assim, sub ou sobre estimação do volume ósseo real. Desta forma, fica evidente que os métodos de segmentação em análise de microTC podem influenciar a precisão dos cálculos da morfometria óssea. A realização do presente estudo teve como objetivo comparar o desempenho de dois diferentes métodos de segmentação de imagem de microTC, subjetivo e objetivo, através da avaliação dos resultados das análises morfométricas obtidas de ossos humanos. Dezesseis amostras contendo parafusos de fixação cobertos por 0,5- 1 mm de osso humano foram escaneados usando o microtomógrafo SkyScan1173. Três examinadores realizaram a segmentação das imagens de forma subjetiva (visualmente) obtendo seus respectivos valores de threshold. Em seguida, a segmentação objetiva (automática) foi realizada. As análises tridimensionais foram obtidas utilizando os valores determinados por ambos os métodos no software CTAn. Cinco parâmetros morfométricos do osso foram calculados (BV / TV, Tb.Th, Tb.N, Tb.Sp, Conn.Den) e usados como variáveis dependentes. O teste ANOVA não mostrou diferenças estatisticamente significantes entre os métodos comparados: BV / TV (p=0,424), Tb.N (p=0,672), Tb.Th (p=0,183), Tb.Sp (p=0 973) e Conn.den (p=0,204). A concordância intra e interobservardores variou entre satisfatória e excelente (0,55-1 e 0,546-0,991, respectivamente). Portanto, os resultados obtidos com a segmentação subjetiva foram semelhantes aos obtidos com a automática. Entretanto, a segmentação automática dispensa intervenção humana, sendo um método verdadeiramente objetivo e deve ser a primeira escolha em estudos microTC que objetivam avaliar a morfometria óssea humana.

Artifacts in cone-beam computed tomographic (CBCT) imaging may compromise radiodiagnosis. Obturation materials for endodontic treatment may present with variable material density and thus also cause distinct artifact expression. The aim of this study was to assess the volume distortion artifact of root canal sealers using CBCT devices and micro-CT imaging as a reference.Thirty single-root mandibular central incisors were used for this study. Teeth were prepared with EndoSequence rotary nickel-titanium files (Brasseler USA, Savannah, GA) and divided into 3 groups. Canals were obturated with gutta-percha and AH Plus root canal sealer (Dentsply Maillefer, Ballaigues, Switzerland) using single-cone filling techniques. Each tooth was scanned with different CBCT devices (ie, Promax 3D Max [Planmeca Inc, Roselle, IL], NewTom VGi evo [NewTom, Verona, Italy], and 3D Accuitomo 170 [J Morita, Kyoto, Japan]) with the same voxel size (0.2 mmThe results showed a significant difference in terms of volume distortion between micro-CT and CBCT images (P .05). There were also significant differences among CBCT devices. Promax 3D Max measurements showed significantly larger root canal volumes than the other CBCT machines (P .05). However, NewTom VGi evo and 3D Accuitomo 170 showed similar results without any significant difference (P .05).CBCT devices showed more volumetric distortion artifact than micro-CT imaging. The volume was variable for different CBCT devices while scanning at the same voxel size. However, to assess the effect of sealer materials on CBCT imaging, further studies should be conducted for different sealers.

To evaluate the performance of conventional radiography and photostimulable phosphor (PSP) plate in the detection of simulated internal root resorption (IRR) lesions in early stages.Twenty single-rooted teeth were X-rayed before and after having a simulated IRR early lesion. Three imaging systems were used: Kodak InSight dental film and two PSPs digital systems, Digora Optime and VistaScan. The digital images were displayed on a 20.1″ LCD monitor using the native software of each system, and the conventional radiographs were evaluated on a masked light box. Two radiologists were asked to indicate the presence or absence of IRR and, after two weeks, all images were re-evaluated. Cohen's kappa coefficient was calculated to assess intra- and interobserver agreement. The three imaging systems were compared using the Kruskal-Wallis test.For interexaminer agreement, overall kappa values were 0.70, 0.65 and 0.70 for conventional film, Digora Optima and VistaScan, respectively. Both the conventional and digital radiography presented low sensitivity, specificity, accuracy, positive and negative predictive values with no significant difference between imaging systems (p = .0725).The performance of conventional and PSP was similar in the detection of simulated IRR lesions in early stages with low accuracy.

The aim of this in-vitro study was to evaluate the influence of cone-beam computed tomography scans on the diagnosis of chemically simulated external root resorption.One hundred extracted anterior teeth were selected. Subsurface demineralization was induced on a limited area of the apical third of the root of 49 teeth. Each tooth was placed in an empty socket of a partially edentulous dry mandible. Cone-beam computed tomography images were obtained according to 3 protocols: (1) half scan, 0.40-mm voxel size; (2) full scan, 0.40-mm voxel size; and (3) full scan, 0.125-mm voxel size. Three observers evaluated the images. Sensitivity, specificity, accuracy, and area under the curve were compared with the Cochran Q and Mann-Whitney U tests.Protocol 3 had the highest sensitivity (81.63%), accuracy (80.67%), and area under the curve (0.807). There were statistically significant differences between protocol 3 and the other 2 protocols (P 0.001). The specificity of protocol 1 (84.97%) was greater than that of protocols 2 (69.93%) and 3 (79.74%); however, a statistically significant difference was found only between protocols 1 and 2 (P = 0.005).A more dedicated, high-resolution scan should be acquired when one intends to investigate the early stage of external root resorption during orthodontic treatment. However, this does not imply that all orthodontic patients should be subjected to high-dose cone-beam computed tomography scans.

This report originated from the finding of metal artefacts on magnetic resonance images (MRI) which were not detected on panoramic radiography or cone beam computed tomography (CBCT) imaging. It was hypothesised that drills or implants might release metal particles during surgical procedures in the jawbones. Therefore, the aim was to assess whether dental implants or surgical drills might cause metal debris in the surrounding tissues.The experiment consisted of a postmortem and an antemortem model. A split-mouth design was carried out in a postmortem fresh frozen cadaver head. In the left mandible only the drill preparation sequence was performed, whereas in the right mandible, the drill sequence was followed by implant placement. Before surgery, the postmortem model underwent a baseline MRI acquisition. A second MRI (MRI2) was acquired after performing the osteotomies on both sides and implant placement on the right side. Finally, the implants were carefully removed, and a final MRI (MRI3) was acquired. Bone blocks containing the implant and osteotomy sites were isolated. For the antemortem model, a fresh frozen cadaver head was selected that already had implants in place. An implant in the anterior maxilla was removed and the surrounding bone block was isolated as well. A histological analysis was prepared for both models.In the antemortem model, histological analysis showed irregular-shaped dark particles near the bone-implant interface consistent with metal debris. Additionally, in the postmortem model, both sites showed metal artefacts on MRI2 and MRI3, and by using a balanced fast field echo sequence, and histological analysis, the suspected particles of metal debris were confirmed on both sides of the mandible.Further studies should investigate the origin and extent of the metal debris following implant placement, as well as its clinical significance, possible risk factors and preventive measures.

The use of micro-CT in medicine and engineering is getting quite popular in the research field. Micro-CT and its applications in dentistry, medicine, tissue engineering, aerospace engineering, geology, and material and civil engineering are a growing demand. Along with this demand, challenges with micro-CT imaging also come together especially in terms of scanning protocols and artifacts. This chapter focuses mainly on main causes of artifacts in micro-CT and how to minimize or eliminate them.

This case report aimed to highlight the usefulness of cone beam computed tomography (CBCT) and its post-processing tools for the diagnosis, follow-up and treatment planning of invasive cervical resorption (ICR). A 16-year-old female patient was referred for periapical radiographic examination, which revealed an irregular but well demarcated radiolucency in the mandibular right central incisor. In addition, CBCT scanning was performed to distinguish between ICR and internal root resorption. After the diagnosis of ICR, the patient was advised to return shortly but did so only six years later. At that time, another CBCT scan was performed and CBCT registration and subtraction were done to document lesion progress. These imaging tools were able to show lesion progress and extent clearly and were fundamental for differential diagnosis and treatment decision. Resumo Com este relato de caso clínico objetiva-se enfatizar a contribuição das ferramentas de pós-processamento aplicadas às imagens de tomografia computadorizada de feixe cônico (TCFC) no diagnóstico, acompanhamento e decisão do tratamento de reabsorção cervical invasiva (ICR). Paciente do sexo feminino, com 16 anos de idade foi encaminhada para realização de radiografia periapical e foi observada radiolucência irregular, na raiz do incisivo central inferior direito. A TCFC foi realizada no intuito de se obter diagnóstico diferencial entre ICR e reabsorção radicular interna. Após o diagnóstico de ICR, o paciente foi orientado a retornar em breve, mas o fez somente seis anos mais tarde. Fez-se assim outra tomografia e registro e subtração foram realizados para documentar a progressão da lesão. Essas ferramentas foram capazes de revelar claramente o progresso da lesão, sua real extensão e foram fundamentais para o diagnóstico diferencial e decisão de tratamento.

Purpose To assess bone microarchitecture in maxillary sites grafted with autogenous or xenogenous grafts as well as to demonstrate the usefulness of microCT in dental implant research. Materials and Methods Samples (n = 12) consisting of titanium fixation screws covered by at least 0.5–1 mm of human bone were obtained from 17 sites grafted with autogenous or xenogenous materials and prepared for microCT scanning and conventional histology. Bone histomorphometric parameters were evaluated in three distinct regions (graft region, transitional region, and native bone region). Three-dimensional (3D) bone-to-implant contact (BIC) calculation was performed using microCT data. Histological sections were used to calculate two-dimensional (2D) BIC percentages, which were compared with values obtained from 2D microCT images. Results Histomorphometric parameters varied according to the type of graft used, but sites reconstructed with autogenous bone showed higher mean values in general. In autograft samples, indices for parameters such as Tb.Th and Tb.Sp were significantly different when the native bone region was compared to the graft region. While a higher mean 3D BIC was found in the native bone region for both graft materials, significant BIC differences were absent when graft types were compared. The 2D BIC percentages obtained from histological and microCT images were similar. Conclusions Autografts outperformed the xenogenous material used in this study concerning the histomorphometric parameters assessed. While graft type did not seem to influence 3D BIC, the native bone region showed the highest BIC percentages when compared to the other regions in both graft groups. In addition, 2D BIC ratios were similar regardless of graft material or image source (histological sections x microCT slices). Taken together, our findings suggest that microCT is an effective tool for 2D and 3D histomorphometric and BIC assessments in dental implant research.

Objectives: To create a new phantom design to evaluate the real impact of artefacts caused by titanium on bone structures in cone beam CT images considering different positions and quantity of metals in the dental arch, with and without metal artefact reduction (MAR). Methods: A three cylindrical polymethyl methacrylate (PMMA) plate phantom was designed containing eight perforations arranged to simulate the lower dental arch in the intermediate plate. Three titanium cylinders were positioned in different locations and quantities to test different clinical conditions and to quantify the impact of the metal artefact around five bone cylinders. Scans were carried out in seven different protocols (Control, A-F) in two cone beam CT devices (OP300 Maxio and Picasso Trio). Eight regions of interest around each cortical and trabecular bone were used to measure the grey value standard deviation corresponding the artefact expression in the Image J software. Both the artefact expression and the MAR effect were assessed using the Wilcoxon, Friedman (Dunn) and Kruskal–Wallis tests (significance level of 5%). Results: For both devices, MAR was statistically efficient only for the protocols E, and F. Protocol F (three metals on the adjacent area of the analysis region) showed higher artefact expression when compared to the others. Conclusion: In conclusion, the new phantom design allowed the quantification of the metal artefact expression caused by titanium. The metal artefact expression is higher when more metal objects are positioned in the adjacent bone structures. MAR may not be effective to reduce artefact expression on the adjacencies of those objects for the devices studied.

The increasing storage of information, data, and forms of knowledge has led to the development of new technologies that can help to accomplish complex tasks in different areas, such as in dentistry. In this context, the role of computational methods, such as radiomics and Artificial Intelligence (AI) applications, has been progressing remarkably for dentomaxillofacial radiology (DMFR). These tools bring new perspectives for diagnosis, classification, and prediction of oral diseases, treatment planning, and for the evaluation and prediction of outcomes, minimizing the possibilities of human errors. A comprehensive review of the state-of-the-art of using radiomics and machine learning (ML) for imaging in oral healthcare is presented in this paper. Although the number of published studies is still relatively low, the preliminary results are very promising and in a near future, an augmented dentomaxillofacial radiology (ADMFR) will combine the use of radiomics-based and AI-based analyses with the radiologist's evaluation. In addition to the opportunities and possibilities, some challenges and limitations have also been discussed for further investigations. ispartof: PROTEOMICS CLINICAL APPLICATIONS vol:14 issue:3 ispartof: location:Germany status: published

OBJECTIVES: To evaluate different materials in simulating soft tissues and to analyze the influence of these materials on the mean (MPIV) and standard deviation of pixel intensity values comparing them to a gold-standard in CBCT images. METHODS: Images of three piglet heads with their soft tissues intact (gold-standard) and different simulant materials were acquired: ice, modelling wax, and ballistic gelatin, with the same thickness of the original soft tissues. The pixel intensities were measured in dental, bone and soft tissues regions, in the mandible and maxilla, for all the groups. Analysis of variance, Dunnet’s, Pearson’s and linear regression tests were performed. RESULTS: The simulators did not significantly change the MPIV of teeth in comparison with the gold-standard (p = 0.1017). Only ice (p = 0.0156) affected the MPIV of bone. Wax (p = 0.001) and ice (p = 0.0076), but not ballistic gelatin (p = 0.5814), altered the MPIV of soft tissue regions. When assessing the influence of the location (mandible or maxilla) among the simulants, the differences were significant only for the soft tissue regions. Standard deviation was not influenced by simulants (p > 0.05), but ballistic gelatin presented the lower variability. CONCLUSIONS: The ballistic gelatin was the best soft tissue simulant since it had the lowest influence on the pixel intensity values for all regions.

To assess blooming artifacts caused by root canal sealers in CBCT images compared with those that appeared in micro-CT scan images used as references. Thirty freshly extracted human mandibular central incisors were used. Root canals were prepared with nickel titanium files with an ISO size 40/0.06 taper and filled with a single cone (40/0.06 taper) and three different sealers. The samples were divided into the following three groups with 10 roots each: (I) AH Plus sealer; (II) Sure Seal Root; and (III) Total BC sealer. Teeth were scanned with the same voxel sizes (0.2 mm) in different CBCT devices and the micro-CT images were acquired as reference images. Significantly different results in terms of blooming artifacts were detected between CBCT and micro-CT images, as well as among the CBCTs images. The canals filled with AH Plus sealer showed more blooming artifacts than those filled with bioceramic sealers (p

Objectives: This report aims to describe the development of age-specific phantoms for use in paediatric dentomaxillofacial radiology research. These phantoms are denoted DIMITRA paediatric skull phantoms as these have been primarily developed and validated for the DIMITRA European research project (Dentomaxillofacial paediatric imaging: an investigation towards low-dose radiation induced risks). Methods: To create the DIMITRA paediatric phantoms, six human paediatric skulls with estimated ages ranging between 4 and 10 years- old were selected, protected with non-radiopaque tape and immersed in melted Mix-D soft tissue equivalent material, by means of a careful procedure (layer-by-layer). Mandibles were immersed separately and a Mix-D tongue model was also created. For validation purposes, the resulting paediatric phantoms were scanned using a cone-beam CT unit with different exposure parameter settings. Results: Preliminary images deriving from all scans were evaluated by two dentomaxillofacial radiologists, to check for air bubbles, artefacts and inhomogeneities of the Mix-D and a potential effect on the visualization of the jaw bone. Only skulls presenting perfect alignment of Mix-D surrounding the bone surfaces with adequate and realistic soft tissue thickness density were accepted. Conclusions: The DIMITRA anthropomorphic phantoms can yield clinically equivalent images for optimization studies in dentomaxillofacial research. In addition, the layer-by-layer technique proved to be practical and reproducible, as long as recommendations are carefully followed. The research leading to these results has received funding from the European Atomic Energy Community's Seventh Framework Programme FP7/2007-2011 under grant agreement no 604984 (OPERRA: Open Project for the European Radiation Research Area).