Search

Experimental results comparing a breech-fed scheme and two distributed energy schemes for a free-running arc are presented. Analysis and observations of the issues associated with distributed energy switching of a plasma arc in the railgun are explored. The use of a free-running arc allows experiments to emulate the ablation and restrike phenomenon of a plasma armature railgun at high speeds (> 5 km/s) without the requirement of a large amount of stored energy. Numerous experimental tests were conducted to investigate the dynamics of plasma arcs within a distributed energy source railgun. Variations of switch timing, bore pressure, bore material, current amplitude, and current pulse length within each stage have been tested. These data reveal important design parameters for distributed energy railguns. The arc length, stage length, and stage trigger timing play a crucial role in distributed energy railgun performance. Failure to take these parameters into consideration will result in velocity reduction through plasma arc restrike and/or splitting. Index Terms--Distributed energy railgun, plasma armature railgun, railgun.

The development process pertaining to the design, fabrication, and testing of a 40-stage free-running arc synchronous distributed energy railgun is presented. Research efforts are still ongoing to suppress the restrike phenomenon that is responsible for causing a velocity ceiling around 6 km/s to exist on plasma armature breech-fed railguns. Numerous solutions have been theorized as viable methods of restrike prevention but lack experimental verification. In collaboration on an AFOSR Multidisciplinary University Research Initiative project, the team at Texas Tech University is responsible for characterizing a functional scale model of a synchronous distributed energy railgun to investigate the effectiveness of a distributed energy scheme to suppress the plasma restrike phenomenon and increase plasma armature railgun performance. The distributed energy scheme is theorized to suppress restrike arc formation because the back-EMF voltage is localized to active stage regions. Synchronous operation refers to the speed of an electromagnetic wave in the LC transmission line formed by the rails and capacitors being matched to the velocity of the armature. The railgun drives a hypervelocity (8 km/s) plasma armature, with no payload, to emulate the conditions of a high-altitude microsatellite launch while relieving the financial burden of a large stored energy facility. Experimental data collected from a seven-stage prototype distributed energy system are discussed which will mimic the design and operation of the first seven stages associated with the final 40-stage system, which is currently under construction. The data collected from this prototype as well as the final 40-stage system will be analyzed for secondary arc formation in an attempt to verify the distributed energy scheme's success in suppressing restrike formation. [ABSTRACT FROM AUTHOR]