Search

Adsorption isotherms are reported for pure water vapor on zeolite 13X (also called zeolite NaX) pellets. Data were obtained using a gravimetric method over a temperature range of 25 to 100 °C and a pressure range of 0.006 to 25 kPa. These pure-component equilibria are fit with the Sips, Toth, and multisite Langmuir models, all modified with the Aranovich–Donohue (A–D) model. The A–D Sips isotherm is recommended for modeling water adsorption on zeolite 13X because it provides the best agreement with the measured isotherm data.

This paper examines the ability of the axially dispersed plug-flow model to accurately predict breakthrough in adsorbent beds confined by rigid walls. The axially dispersed plug-flow model is used ...

Fixed-bed adsorption is widely used in industrial gas separation and is the primary method for atmosphere revitalization in space. This paper analyzes the uncertainty of a one-dimensional, fixed-bed adsorption model due to uncertainty in several model inputs, namely, the linear-driving-force (LDF) mass transfer coefficient, axial dispersion, heat transfer coefficients, and adsorbent properties. The input parameter uncertainties are determined from a comprehensive survey of experimental data in the literature. The model is first calibrated against experimental data from intra-bed centerline concentration measurements to find the LDF coefficient. We then use this LDF coefficient to extract axial dispersion coefficients from mixed, downstream concentration measurements for both a small-diameter bed (dominated by wall-channeling) and a large-diameter bed (dominated by pellet-driven dispersion). The predicted effluent concentration and temperature profiles are most strongly affected by uncertainty in LDF coefficient, adsorbent density, and void fraction. The uncertainty analysis further reveals that ignoring the effect of wall-channeling on apparent axial dispersion can cause significant error in the predicted breakthrough times of small-diameter beds.

Adsorption isotherms are reported for pure carbon dioxide on zeolite 13X (also called zeolite NaX) pellets over a temperature range of 0 to 200 °C and a pressure range of 0.001 to 100 kPa. These pure-component equilibria are fit with Langmuir, Toth, two-site Langmuir, and three-site Langmuir models, both with and without temperature dependence being included in the saturation capacity. The agreement between fitted and measured isotherms is shown to increase with increasing number of available fitting parameters in the model, with the constant-saturation, two-site Langmuir isotherm providing the best balance between agreement with the measurements and model complexity. The isosteric heats of adsorption are measured across a temperature range from 10 to 200 °C using differential scanning calorimetry. The measured heats of adsorption decrease with increasing CO2 loading but show little variation with temperature. The measurements are shown to agree with predicted heats of adsorption derived from the fitted L...

Structured porous materials show great potential as extended surfaces in heat-exchange applications that also require design for load-bearing capability. In particular, lattice-frame materials (LFM) are known for their superior strength-to-weight ratio; this work presents a comprehensive experimental and numerical study of fluid flow and heat transfer in porous LFMs. Flow through a periodic unit cell of the material is simulated to characterize the forced-convection performance under hydraulically and thermally fully developed conditions. The performance of LFMs with a tetrahedral ligament configuration is characterized as a function of Reynolds number in the laminar regime (150 Re