Search

Polyvinyl polymers bearing pendant hole transport functionalities have been extensively explored for solution-processed hole transport layer (HTL) technologies, yet there are only rare examples of high anisotropic packing of the HT moieties of these polymers into substrate-parallel orientations within HTL films. For small molecules, substrate-parallel alignment of HT moieties is a well-established approach to improve overall device performance. To address the longstanding challenge of extension from vapor-deposited small molecules to solution-processable polymer systems, a fundamental chemistry tactic is reported here, involving the positioning of HT side chains within macromolecular frameworks by the construction of HT polymers having bottlebrush topologies. Applying state-of-the-art polymer synthetic techniques, various functional subunits, including triphenylamine (TPA) for hole transport and adhesion to the substrate, and perfluoro alkyl-substituted benzyloxy styrene for migration to the air interface, were organized with exquisite control over the composition and placement throughout the bottlebrush topology. Upon assembling the HT bottlebrush (HTB) polymers into monolayered HTL films on various substrates through spin-casting and thermal annealing, the backbones of HTBs were vertically aligned while the grafts with pendant TPAs were extended parallel to the substrate. The overall design realized high TPA π-stacking along the out-of-plane direction of the substrate in the HTLs, which doubled the efficiency of organic light-emitting diodes compared with linear poly(vinyl triphenylamine)s.

Metal-free redox flow batteries with TEMPO-based polypeptide catholytes and viologen-based polypeptide anolytes were demonstrated. Post-cycling analysis indicated the main source of capacity fade was degradation of the redox-active pendant groups.

Hemorrhage is a prime cause of death in civilian and military traumatic injuries, whereby a significant proportion of death and complications occur prior to paramedic arrival and hospital resuscitation. Hence, it is crucial to develop hemostatic materials that are able to be applied by simple processes and allow control over bleeding by inducing rapid hemostasis, non-invasively, until subjects receive necessary medical care. This

The maximum capacitive energy stored in polymeric dielectric capacitors, which are ubiquitous in high-power-density devices, is dictated by the dielectric breakdown strength of the dielectric polymer. The fundamental mechanisms of the dielectric breakdown, however, remain unclear. Based on a simple free-volume model of the polymer fluid state, we hypothesized that the free ends of linear polymer chains might act as "defect" sites, at which the dielectric breakdown can initiate. Thus, the dielectric breakdown strength of cyclic polymers should exhibit enhanced stability in comparison to that of their linear counterparts having the same composition and similar molar mass. This hypothesis is supported by the ∼50% enhancement in the dielectric breakdown strength and ∼80% enhancement in capacitive energy density of cyclic polystyrene melt films in comparison to corresponding linear polystyrene control films. Furthermore, we observed that cyclic polymers exhibit a denser packing density than the linear chain melts, an effect that is consistent with and could account for the observed property changes. Our work demonstrates that polymer topology can significantly influence the capacitive properties of polymer films, and correspondingly, we can expect polymer topology to influence the gas permeability, shear modulus, and other properties of thin films dependent on film density.

Convolutional neural networks (CNNs) and other deep-learning models have proven to be transformative tools for the automated analysis of microscopy images, particularly in the domain of cellular and tissue imaging. These computer-vision models have primarily been applied with traditional microscopy imaging modalities (e.g. brightfield and fluorescence), likely due to the availability of large datasets in these regimes. However, more advanced microscopy imaging techniques could, potentially, allow for improved model performance in various computational histopathology tasks. In this work, we demonstrate that CNNs can achieve high accuracy in cell detection and classification without large amounts of data when applied to histology images acquired by fluorescence lifetime imaging microscopy (FLIM). This accuracy is higher than what would be achieved with regular single or dual-channel fluorescence images under the same settings, particularly for CNNs pretrained on publicly available fluorescent cell or general image datasets. Additionally, generated FLIM images could be predicted from just the fluorescence image data by using a dense U-Net CNN model trained on a subset of ground-truth FLIM images. These U-Net CNN generated FLIM images demonstrated high similarity to ground truth and improved accuracy in cell detection and classification over fluorescence alone when used as input to a variety of commonly used CNNs. This improved accuracy was maintained even when the FLIM images were generated by a U-Net CNN trained on only a few example FLIM images.

Platelet-like and cylindrical nanostructures from sugar-based polymers are designed to mimic the aspect ratio of bacteria and achieve uroepithelial cell binding and internalization, thereby improving their potential for local treatment of recurrent urinary tract infections. Polymer nanostructures, derived from amphiphilic block polymers composed of zwitterionic poly(d-glucose carbonate) and semicrystalline poly(l-lactide) segments, were constructed with morphologies that could be tuned to enhance uroepithelial cell binding. These nanoparticles exhibited negligible cytotoxicity, immunotoxicity, and cytokine adsorption, while also offering substantial silver cation loading capacity, extended release, and in vitro antimicrobial activity (as effective as free silver cations) against uropathogenic Escherichia coli. In comparison to spherical analogues, cylindrical and platelet-like nanostructures engaged in significantly higher association with uroepithelial cells, as measured by flow cytometry; despite their larger size, platelet-like nanostructures maintained the capacity for cell internalization. This work establishes initial evidence of degradable platelet-shaped nanostructures as versatile therapeutic carriers for treatment of epithelial infections.

Zwitterionic polymer nanoparticles of diverse morphologies (spherical, cylindrical, and platelet-like) constructed from biocompatible sugar-based polymers are designed to extend the pharmacological activities of short- and long-acting insulin peptides, thereby providing potential for therapeutic systems capable of reducing the frequency of administration and improving patient compliance. Amphiphilic block copolymers composed of zwitterionic poly( d -glucose carbonate) and semicrystalline polylactide segments were synthesized, and the respective block length ratios were tuned to allow formation of nanoscopic assemblies having different morphologies. Insulin-loaded nanoparticles had similar sizes and morphologies to the unloaded nanoparticle counterparts. Laser scanning confocal microscopy imaging of three-dimensional spheroids of vascular smooth muscle cells and fibroblasts after treatment with LIVE/DEAD® stain and FITC-insulin-loaded nanoparticles demonstrated high biocompatibility for the nanoconstructs of the various morphologies and significant intracellular uptake of insulin in both cell lines, respectively. Binding of short-acting insulin and long-acting insulin glargine to nanoparticles resulted in extended hypoglycemic activities in rat models of diabetes. Following subcutaneous injection in diabetic rats, insulin- and insulin glargine-loaded nanoparticles of diverse morphologies had demonstrated up to 2.6-fold and 1.7-fold increase in pharmacological availability, in comparison to free insulin and insulin glargine, respectively. All together, the negligible cytotoxicity, immunotoxicity, and minimal cytokine adsorption onto nanoparticles (as have been demonstrated in our previous studies) provide exciting and promising evidence of biocompatible nanoconstructs that are poised for further development toward the management of diabetes.

In only a few decades, lithium-ion batteries have revolutionized technologies, enabling the proliferation of portable devices and electric vehicles1, with substantial benefits for society. However, the rapid growth in technology has highlighted the ethical and environmental challenges of mining lithium, cobalt and other mineral ore resources, and the issues associated with the safe usage and non-hazardous disposal of batteries2. Only a small fraction of lithium-ion batteries are recycled, further exacerbating global material supply of strategic elements3–5. A potential alternative is to use organic-based redox-active materials6–8 to develop rechargeable batteries that originate from ethically sourced, sustainable materials and enable on-demand deconstruction and reconstruction. Making such batteries is challenging because the active materials must be stable during operation but degradable at end of life. Further, the degradation products should be either environmentally benign or recyclable for reconstruction into a new battery. Here we demonstrate a metal-free, polypeptide-based battery, in which viologens and nitroxide radicals are incorporated as redox-active groups along polypeptide backbones to function as anode and cathode materials, respectively. These redox-active polypeptides perform as active materials that are stable during battery operation and subsequently degrade on demand in acidic conditions to generate amino acids, other building blocks and degradation products. Such a polypeptide-based battery is a first step to addressing the need for alternative chemistries for green and sustainable batteries in a future circular economy. An environmentally friendly, all-organic radical battery is demonstrated, in which redox-active polypeptides perform as both cathode and anode materials, with a metal-free organic electrolyte.

Synthetic transformation of D-xylose into a four-membered cyclic ether allows for reactions with carbon dioxide (CO2) leading to linear polycarbonates by either a one-step ring-opening copolymerisation (ROCOP) directly, or by sequential isolation of a preformed six-membered cyclic carbonate followed by ring-opening polymerisation (ROP).

The direct and facile synthesis of polyphosphoramidates (PPAs) with acid-labile phosphoramidate backbone linkages are reported, together with demonstration of their hydrolytic degradability, evaluated under acidic conditions. The introduction of acid-labile linkages along the polymer backbone led to rapid degradation of the polymer backbone dependent upon the environmental stimuli. An oxazaphospholidine monomer bearing a phosphoramidate linkage was designed and synthesized to afford the PPAs via organobase-catalyzed ring-opening polymerization in a controlled manner. The hydrolytic degradation of the PPAs was studied, revealing breakdown of the polymer backbone through cleavage of the phosphoramidate linkages under acidic conditions.

Camptothecin (CPT) is a promising anticancer drug, yet its therapeutic potential has been limited by poor water solubility and facile hydrolysis of the lactone form into an inactive carboxylate form at neutral pH. In this work, a fundamental synthetic methodology was advanced to allow for the preparation of well-defined functional polyphosphoramidate (PPA)-based block copolymers that coassembled with CPT into nanoparticles, which underwent coincident acid-triggered polymer backbone degradation, nanoparticle disassembly, and CPT release. Encapsulation of CPT by the PPA polymer inhibited premature hydrolysis of CPT at pH 7.4 and enabled accelerated CPT release at pH 5.0 (ca. 4× faster than at pH 7.4). Two degradable oxazaphospholidine monomers, with one carrying an alkyne group, were synthesized to access well-defined block PPAs (dispersity, Đ

Regioregularity is a crucial property in the synthesis of DNA analogues, as natural DNA is synthesized exclusively in the 5′ to 3′ direction. We have focused our attention on the determination of the regioisomeric distribution of poly(3′,5′-cyclic 3-(3-butenyl) thymidine ethylphosphate)s obtained from the ring-opening polymerization of (R)-3′,5′-cyclic 3-(3-butenyl) thymidine ethylphosphate. The regioisomeric preference was investigated by comparison to synthesized model compounds of 3′,3′-, 3′,5′-, and 5′,5′-linkages, where the model 3′-phosphoester linkages were to the secondary alcohol of 3-hydroxytetrahydrofuran and the model 5′-linkages derived from coupling to the primary alcohol of tetrahydrofurfuryl alcohol. From the 31P resonance frequency assignments of those small molecule model compounds, 31P NMR spectra revealed the major connectivity in the polymer backbone to be 3′,5′-linkages, with ≤30% of other isomeric forms. Model reactions employing a series of alcohol initiators imparting various degr...

An antibiofouling polymer coating, combined with both zwitterionic and amphiphilic features, is engineered by a two-step modification of a commodity polymer. The surface properties of the resultant polymer coating can be easily tuned by varying the extent of cross-linking in the network. Higher antibiofouling efficiency was observed for these surfaces vs. an elastomeric polydimethylsiloxane standard (Sylgard 184) against the adsorption of biomacromolecules and a marine fouling organism (Ulva zoospores) has been demonstrated. This design establishes a platform for the achievement of functionalized amphiphilic zwitterionic copolymers from relatively inexpensive starting materials via simple chemical manipulations.

Dumbbell-shaped triblock molecular brushes were synthesized by ring-opening metathesis polymerization (ROMP) of poly(lactide) macromonomers with terminal norbornene groups (NB-PLA) in a sequential addition manner. By changing the macromonomer size and the feed ratio of Grubbs’ catalyst to macromonomer, the dimensions of the “ball” and “bar” of the dumbbell-shaped molecular brushes were controlled. The growth and production of well-defined structures were verified by gel permeation chromatography (GPC), and the final dumbbell-shaped architectures were visualized by atomic force microscopy (AFM). This synthetic methodology represents a rapid and convenient route to unique macromolecular topologies.

The extent of participation of side-chain functionalities during the 1,5,7-triazabicyclo[5.4.0]dec-5-ene (TBD) organobase-catalyzed ring-opening polymerizations (ROP) of six-membered cyclic d-glucose-based carbonates was found to result in significantly different regiochemical outcomes. High regioselectivity was observed for naturally derived poly(4,6-d-glucose carbonate)s (PGCs) containing carbonate side chain substituents in the 2- and 3-positions, whereas regioirregularity was found for analogous PGCs with ether side-chain substituents. The backbone connectivities and structural details of these PGCs were examined through a combination of comprehensive 1D and 2D NMR studies on unimers and dimers, verifying the ring-opening preferences and indicating the contribution of side-chain functionalities in regioselective ROP processes. A molecular understanding of the curious role of side-chain functionalities was demonstrated via density functional theory calculations, revealing stabilization effects of intermolecular hydrogen bonding between the side-chain functionalities and TBD in the transition states. Overall, this work provides fundamental insights into the organocatalytic ROP of these specific six-membered asymmetric cyclic glucose carbonates. More importantly, these findings serve as a foundation for future design strategies that incorporate adjacent functionalities within monomers to act as directing groups and impart molecular interactions that define regiochemical ring-opening.

We report the fibril formation of poly(d-glucose carbonate) (PGC)-based amphiphilic diblock copolymers using solution assembly. Unlike conventional cylindrical micelles constructed from amphiphilic...

Interactions between drug molecules, nanocarrier components, and surrounding media influence the properties and therapeutic efficacies of nanomedicines. In this study, we investigate the role that reversible covalent loading of a hydrophobic drug exerts on intra-nanoparticle physical properties and explore the utility of this payload control strategy for tuning the access of active agents and, thereby, the stimuli sensitivity of smart nanomaterials. Glutathione sensitivity was controlled via altering the degree of hydrophobic payload loading of disulfide-linked camptothecin-conjugated sugar-based nanomaterials. Increases in degrees of camptothecin conjugation (fCPT) decreased aqueous accessibility and reduced glutathione-triggered release. Although the lowest fCPT gave the fastest camptothecin release, it resulted in the lowest camptothecin concentration. Remarkably, the highest fCPT resulted in a 5.5-fold improved selectivity against cancer vs noncancerous cells. This work represents an advancement in drug carrier design by demonstrating the importance of controlling the amount of drug loading on the overall payload and its availability.

In this work, we designed and fabricated a nanoscopic sugar-based magnetic hybrid material that is capable of tackling environmental pollution posed by marine oil spills, while minimizing potential secondary problems that may occur from microplastic contamination. These readily-defined magnetic nanocomposites were constructed through co-assembly of magnetic iron oxide nanoparticles (MIONs) and a degradable amphiphilic polymer, poly(ethylene glycol)-b-dopamine-functionalized poly(ethyl propargyl glucose carbonate)-b-poly(ethyl glucose carbonate), PEG-b-PGC[(EPC-MPA)-co-(EPC-DOPA)]-b-PGC(EC), driven by supramolecular co-assembly in water with enhanced interactions provided via complexation between dopamine and MIONs. The composite nanoscopic assemblies possessed a pseudo-micellar structure, with MIONs trapped within the polymer framework. The triblock terpolymer was synthesized by sequential ring-opening polymerizations (ROPs) of two glucose-derived carbonate monomers, initiated by a PEG macroinitiator. Dopamine anchoring groups were subsequently installed by first introducing carboxylic acid groups using a thiol–yne click reaction, followed by amidation with dopamine. The resulting amphiphilic triblock terpolymers and MIONs were co-assembled to afford hybrid nanocomposites using solvent exchange processes from organic solvent to water. In combination with hydrophobic interactions, the linkage between dopamine and iron oxide stabilized the overall nanoscopic structure to allow for the establishment of a uniform globular morphology, whereas attempts at co-assembly with the triblock terpolymer precursor, lacking dopamine side chains, failed to afford well-defined nanostructures. The magnetic hybrid nanoparticles demonstrated high oil sorption capacities, ca. 8 times their initial dry weight, attributed, in part, to large surface areas leading to effective contact between the nanomaterials and hydrocarbon pollutants. Moreover, the naturally-derived polymer framework undergoes hydrolytic degradation to break down into byproducts that include glucose, ethanol and dopamine if not recovered after deployment, alleviating concerns of potential microplastic generation and persistence.

As a rapid, controllable, and easily transferrable approach to the preparation of antimicrobial nanoparticle systems, a one-step, light-driven procedure was developed to produce asymmetric hybrid inorganic-organic nanoparticles (NPs) directly from a homogeneous Ag/polymer mixture. An amphiphilic triblock polymer was designed and synthesized to build biocompatible NPs, consisting of poly(ethylene oxide) (PEO), carboxylic acid-functionalized polyphosphoester (PPE), and poly(l-lactide) (PLLA). Unexpectedly, snowman-like asymmetric nanostructures were subsequently obtained by simply loading silver cations into the polymeric micelles together with purification via centrifugation. With an understanding of the chemistry of the asymmetric NP formation, a controllable preparation strategy was developed by applying UV irradiation. A morphology transition was observed by transmission electron microscopy over the UV irradiation time, from small silver NPs distributed inside the micelles into snowman-like asymmetric NPs, which hold promise for potential antimicrobial applications with their unique two-stage silver release profiles.

In this paper, we present a computational reverse-engineering analysis for scattering experiments (CREASE) based on genetic algorithms and molecular simulation to analyze the structure within self-assembled amphiphilic polymer solutions. For a given input comprised of scattering intensity profiles and information about the amphiphilic polymers in solution, CREASE outputs the structure of the self-assembled micelles (e.g., core and corona diameters, aggregation number) as well as the conformations of the amphiphilic polymer chains in the micelle (e.g., blocks' radii of gyration, chain radii of gyration, monomer concentration profiles). First, we demonstrate CREASE's ability to reverse-engineer self-assembled nanostructures for scattering profiles obtained from molecular simulations (or

For near-neutrally buoyant colloids, retention on surfaces is dramatically reduced for radii in the range from approximately 100 nm to 1 μm (i.e., n−μ transition) under unfavorable conditions (ener...

Pseudomonas aeruginosa has been detected in the lungs of ∼50% of patients with cystic fibrosis (CF), including 20% of adult CF patients. The majority of these adult patients harbor multi-drug resistant (MDR) strains, limiting the available treatment options. Silver has long been used as a broad-spectrum antimicrobial agent with a low incidence of resistance. Despite low toxicity, poor availability of silver cations mandates a high dosage to effectively eradicate infections. To address this shortcoming of silver, nanoparticles have been used as delivery devices to improve treatment outcomes. Furthermore, studies have demonstrated that synergistic combinations with careful dose calibrations and efficient delivery systems result in superior antimicrobial activity while avoiding potential side effects of both therapeutics. Here 4-epi-minocycline, a metabolite of minocycline, was identified as an active antimicrobial against P. aeruginosa using a high-throughput screen. The antimicrobial activities of 4-epi-minocycline, minocycline, and silver acetate against clinical isolates of P. aeruginosa obtained from CF patients were evaluated in vitro. Next, the synergistic activity of the silver/minocycline combination against P. aeruginosa isolates was investigated using checkerboard assays and identified with end-point colony forming unit determination assays. Finally, nanoparticles coloaded with minocycline and silver were evaluated in vitro for antimicrobial activity. The results demonstrated that both silver and minocycline are potent antimicrobials alone and that the combination allows a reduced dosage of both therapeutics to achieve the same antimicrobial effect. Furthermore, the proposed synergistic silver/minocycline combination can be coloaded into nanoparticles as a next-generation antibiotic to combat the threats presented by MDR pathogens.

Rates of NO release from synthetic dinitrosyl iron complexes (DNICs) are shown to be responsive to coordination environments about iron. The effect of biologically relevant cellular components, glutathione and histidine, on the rate of NO release from a dimeric, "Roussin's Red Ester", DNIC with bridging μ-S thioglucose ligands, SGlucRRE or [(μ-SGluc)Fe(NO)2]2 (SGluc = 1-thio-β-d-glucose tetraacetate), was investigated. From the Griess assay and X-band EPR data, decomposition of the product from the histidine-cleaved dimer, [(SGluc)(NHis)Fe(NO)2], generated Fe(III) and increased the NO release rate in aqueous media when compared to the intact SGlucRRE precursor. In contrast, increasing concentrations of exogenous glutathione generated the stable [(SGluc)(GS)Fe(NO)2]- anion and depressed the rate of NO release. Both of the cleaved, monomeric intermediates were characterized with ESI-MS, EPR, and FT-IR spectroscopies. On the basis of the Griess assay coupled with data from an intracellular fluorometric probe, both the monomeric DNICs and dimeric SGlucRRE diffuse into smooth muscle cells, chosen as appropriate archetypes of vascular relaxation, and release their NO payload. Ultimately, this work provides insight into tuning NO release beyond the design of DNICs, through the incubation with safe, accessible biological molecules.

In only a few decades, lithium-ion batteries have revolutionized technologies, enabling the proliferation of portable devices and electric vehicles

A zwitterionic polyphosphoester (zPPE), specifically l-cysteine-functionalized poly(but-3-yn-1-yloxy)-2-oxo-1,3,2-dioxaphospholane (zPBYP), has been developed as a poly(ethylene glycol) (PEG) alternative coating material for gold nanoparticles (AuNPs), the most extensively investigated metal nanoparticulate platform toward molecular imaging, photothermal therapy, and drug delivery applications. Thiol–yne conjugation of cysteine transformed an initial azido-terminated and alkynyl-functionalized PBYP homopolymer into zPBYP, offering hydrolytic degradability, biocompatibility, and versatile reactive moieties for installation of a range of functional groups. Despite minor degradation during purification, zPPEs were able to stabilize AuNPs presumably through multivalent interactions between combinations of the side chain zwitterions (thioether and phosphoester groups of the zPPEs with the AuNPs). 31P NMR studies in D2O revealed ca. 20% hydrolysis of the phosphoester moieties of the repeat units had occurred du...

Carbohydrates are the fundamental building blocks of many natural polymers, their wide bioavailability, high chemical functionality, and stereochemical diversity make them attractive starting materials for the development of new synthetic polymers. In this work, one such carbohydrate, d‐glucopyranoside, was utilized to produce a hydrophobic five‐membered cyclic carbonate monomer to afford sugar‐based amphiphilic copolymers and block copolymers via organocatalyzed ring‐opening polymerizations with 4‐methylbenzyl alcohol and methoxy poly(ethylene glycol) as initiator and macroinitiator, respectively. To modulate the amphiphilicities of these polymers acidic benzylidene cleavage reactions were performed to deprotect the sugar repeat units and present hydrophilic hydroxyl side chain groups. Assembly of the polymers under aqueous conditions revealed interesting morphological differences, based on the polymer molar mass and repeat unit composition. The initial polymers, prior to the removal of the benzylidenes, underwent a morphological change from micelles to vesicles as the sugar block length was increased, causing a decrease in the hydrophilic–hydrophobic ratio. Deprotection of the sugar block increased the hydrophilicity and gave micellar morphologies. This tunable polymeric platform holds promise for the production of advanced materials for implementation in a diverse range of applications. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 432–440

To expand the range of functional polymer materials to include fully hydrolytically degradable systems that bear bioinspired phosphorus-containing linkages both along the backbone and as cationic side chain moieties for packaging and delivery of nucleic acids, phosphonium-functionalized polyphosphoester-block-poly(l-lactide) copolymers of various compositions were synthesized, fully characterized, and their self-assembly into nanoparticles were studied. First, an alkyne-functionalized polyphosphoester-block-poly(l-lactide) copolymer was synthesized via a one pot sequential ring opening polymerization of an alkyne-functionalized phospholane monomer, followed by the addition of l-lactide to grow the second block. Second, the alkynyl side groups of the polyphosphoester block were functionalized via photoinitiated thiol–yne radical addition of a phosphonium-functionalized free thiol. The polymers of varying phosphonium substitution degrees were self-assembled in aqueous buffers to afford formation of well-defined core–shell assemblies with an average size ranging between 30 and 50 nm, as determined by dynamic light scattering. Intracellular delivery of the nanoparticles and their effects on cell viability and capability at enhancing transfection efficiency of nucleic acids (e.g., siRNA) were investigated. Cell viability assays demonstrated limited toxicity of the assembly to RAW 264.7 mouse macrophages, except at high polymer concentrations, where the polymer of high degree of phosphonium functionalization induced relatively higher cytotoxicity. Transfection efficiency was strongly affected by the phosphonium-to-phosphate (P+/P–) ratios of the polymers and siRNA, respectively. The AllStars Hs Cell Death siRNA complexed to the various copolymers at a P+/P– ratio of 10:1 induced comparable cell death to Lipofectamine. These fully degradable nanoparticles might provide biocompatible nanocarriers for therapeutic nucleic acid delivery.

Saccharides, based on their wide bioavailability, high chemical functionality and stereochemical diversity, are attractive starting materials for the development of new synthetic polymers. Established carbonylation methodologies were used to synthesize a 5-membered cyclic carbonate monomer, 4,6-O-benzylidene-2,3-O-carbonyl-α-d-glucopyranoside (MBGC), in high yield (>95%) from a commercially available d-glucopyranoside derivative. The ability of this monomer to undergo ring-opening polymerization (ROP) with a range of organocatalysts, rather than the previously reported anionic initiators, was investigated. These new conditions were developed to widen the functional group tolerance in the polymerization, and achieve better control over the final properties of the polymers. The most promising of the catalysts examined, 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD), was used in a kinetic study to confirm the well-controlled nature of the ROP. Optimized conditions were then successfully applied to the synthesis o...

Although nanomedicines have been pursued for nearly 20 years, fundamental chemical strategies that seek to optimize both the drug and drug carrier together in a concerted effort remain uncommon yet may be powerful. In this work, two block polymers and one dimeric prodrug molecule were designed to be coassembled into degradable, functional nanocarriers, where the chemistry of each component was defined to accomplish important tasks. The result is a poly(ethylene glycol) (PEG)-protected redox-responsive dimeric paclitaxel (diPTX)-loaded cationic poly(d-glucose carbonate) micelle (diPTX@CPGC). These nanostructures showed tunable sizes and surface charges and displayed controlled PTX drug release profiles in the presence of reducing agents, such as glutathione (GSH) and dithiothreitol (DTT), thereby resulting in significant selectivity for killing cancer cells over healthy cells. Compared to free PTX and diPTX, diPTX@CPGC exhibited improved tumor penetration and significant inhibition of tumor cell growth toward osteosarcoma (OS) lung metastases with minimal side effects both in vitro and in vivo, indicating the promise of diPTX@CPGC as optimized anticancer therapeutic agents for treatment of OS lung metastases.

The development of next-generation smart nanocarriers that can be tailored for specific applications requires precise control over physiochemical properties, yet modulation of nanostructures solely through synthetic routes is a time-consuming and labor-intensive process. In this work, co-assembly of two degradable glucose-based amphiphilic block polymers is demonstrated as a means to control nanoparticle size, surface charge, and stimuli-responsive properties, allowing optimization of these constructs for cytosolic drug delivery applications. Polymeric particles with varying weight fractions of carboxylate- and histamine-modified poly(DL-lactide)-b-poly(D-glucose carbonate)s (PDLLA-b-PDGC) were obtained with diameters ranging from ca. 30 nm to 3 μm and zeta potential values ranging from ca. −35 mV to −1.6 mV in nanopure water. Histamine moieties imparted pH-responsive behavior due to protonation below pH 7, whereas the carboxylates imparted colloidal stability and anionic character. Blending the acid- and histamine-functionalized polymers produced co-assemblies with different pH-dependent surface charge profiles. In particular, co-assemblies with 60 wt% histamine-modified PDLLA-b-PDGC (fhistamine = 0.6) swelled upon acidification from physiological pH (7.4) to endolysosomal pH (5.5), which is anticipated to enable drug release within endolysosomal compartments. The accessible procedures presented here for engineering highly tunable nanoparticles from glucose-based, functional, degradable polymers offer versatile strategies for accelerating the development and clinical implementation of such stimuli-responsive, tailored nanocarriers.

Well-defined molecular brushes bearing polypeptides as side chains were prepared by a “grafting through” synthetic strategy with two-dimensional control over the brush molecular architectures. By integrating N-carboxyanhydride ring-opening polymerizations (NCA ROPs) and ring-opening metathesis polymerizations (ROMPs), desirable segment lengths of polypeptide side chains and polynorbornene brush backbones were independently constructed in controlled manners. The N2 flow accelerated NCA ROP was utilized to prepare polypeptide macromonomers with different lengths initiated from a norbornene-based primary amine, and those macromonomers were then polymerized via ROMP. It was found that a mixture of dichloromethane and an ionic liquid were required as the solvent system to allow for construction of molecular brush polymers having densely-grafted peptide chains emanating from a polynorbornene backbone, poly(norbornene-graft-poly(β-benzyl-l-aspartate)) (P(NB-g-PBLA)). Highly efficient postpolymerization modificat...

Crystallization-driven self assembly (CDSA) was achieved with fully degradable amphiphilic block polymers derived from three natural products, l -lactide, l -cysteine and d -glucose, to afford spherical and cylindrical nanostructures. A series of functional l -cysteine-modified diblock copolymers, poly( l -lactide)- block -poly(α- d -glucose carbonate)s (PLLA- b -PDGC-cys), was synthesized by organocatalyzed sequential ring-opening polymerization (ROP) of l -lactide and an alkyne-substituted bicyclic α- d -glucose carbonate, followed by UV-initiated thiol-yne “click” reaction with l -cysteine to render the PDGC block hydrophilic. Incubation of the resulting amphiphilic diblock copolymers in water at 65 °C for 30 h, followed by cooling to room temperature yielded spherical, cylindrical and 2D platelet-like bundled cylinder micellar nanostructures, depending on the PLLA weight percentage in the block copolymer, as revealed by transmission electron microscopy (TEM) and atomic force microscopy (AFM). 1 H NMR spectroscopy was employed to monitor the degradation of the materials over 100 d in aqueous solution at pH 1 and 10 at 37 °C, which allowed for characterization of the stability of the micelles, and for determination of the hydrolytic degradability of the polymer backbone and cleavage of the side chain moieties. Electrospray ionization (ESI) and matrix-assisted laser desorption/ionization-time of flight (MALDI-TOF) mass spectrometry were used to identify the hydrolytic degradation products of the copolymers. Overall, this work broadens the scope of CDSA to functional, natural-product based degradable block copolymers (BCPs), and the polymeric nanomaterials synthesized in this work hold promise in drug and antimicrobial delivery applications, among others.

Herein, we demonstrate the synthesis of a bicyclic carbonate monomer of a d-glucal derivative, which originated from the natural product d-glucose, in an efficient three-step procedure and its ring-opening polymerization (ROP), initiated by 4-methylbenzyl alcohol, via organocatalysis. The ROP behavior was studied as a function of time, catalyst type, and catalyst concentration by using size exclusion chromatography (SEC) and nuclear magnetic resonance (NMR) spectroscopy. Using a cocatalyst system of 1,8-diazabicyclo[5.4.0]undec-7-ene and 1-(3,5-bis(trifluoromethyl)phenyl)-3-cyclohexyl-2-thiourea (5 mol %) afforded poly(d-glucal-carbonate) (PGCC) with almost complete monomer conversion (ca. 99%) within 1 min, as analyzed by 1H NMR spectroscopy, and a monomodal SEC trace with dispersity of 1.13. The resulting PGCCs exhibited amorphous characteristics with a relatively high glass transition temperature at ca. 69 °C and onset decomposition temperature at ca. 190 °C, as analyzed by differential scanning calori...

A grand challenge that crosses synthetic chemistry and biology is the scalable production of functional analogues of biomacromolecules. We have focused our attention on the use of deoxynucleoside building blocks bearing non-natural bases to develop a synthetic methodology that allows for the construction of high molecular weight deoxynucleotide polymers. Our six-membered cyclic phosphoester ring-opening polymerization strategy is demonstrated, herein, by an initial preparation of novel polyphosphoesters, comprised of butenyl-functionalized deoxyribonucleoside repeat units, connected via 3′,5′-backbone linkages. A thymidine-derived bicyclic monomer, 3′,5′-cyclic 3-(3-butenyl) thymidine ethylphosphate, was synthesized in two steps directly from thymidine, via butenylation and diastereoselective cyclization promoted by N,N-dimethyl-4-aminopyridine. Computational modeling of the six-membered 3′,5′-cyclic phosphoester ring derived from deoxyribose indicated strain energies at least 5.4 kcal/mol higher than tho...

Hadeel Elzeny,1,* Fuwu Zhang,2,* Esraa N Ali,1 Heba A Fathi,1 Shiyi Zhang,3 Richen Li,2 Mohamed A El-Mokhtar,4 Mostafa A Hamad,5 Karen L Wooley,2,6 Mahmoud Elsabahy1,6–8 1Assiut International Center of Nanomedicine, Al-Rajhy Liver Hospital, Assiut University, Assiut, Egypt; 2Departments of Chemistry, Chemical Engineering and Materials Science and Engineering, Texas A&M University, College Station, TX, USA; 3School of Biomedical Engineering, Shanghai Jiao Tong University, Shanghai, People’s Republic of China; 4Department of Microbiology and Immunology, Faculty of Medicine, 5Department of Surgery, Faculty of Medicine, Assiut University, Assiut, Egypt; 6Laboratory for Synthetic-Biologic Interactions, Department of Chemistry, Texas A&M University, College Station, TX, USA; 7Department of Pharmaceutics, Faculty of Pharmacy, Assiut University, Assiut, 8Misr University for Science and Technology, 6th of October City, Egypt *These authors contributed equally to this work Abstract: Delivery of multiple therapeutics and/or diagnostic agents to diseased tissues is challenging and necessitates the development of multifunctional platforms. Among the various strategies for design of multifunctional nanocarriers, biodegradable polyphosphoester (PPE) polymers have been recently synthesized via a rapid and simple synthetic strategy. In addition, the chemical structure of the polymer could be tuned to form nanoparticles with varying surface chemistries and charges, which have shown exceptional safety and biocompatibility as compared to several commercial agents. The purpose of this study was to exploit a mixture of PPE nanoparticles of cationic and neutral surface charges for multiple delivery of anticancer drugs (ie, sorafenib and paclitaxel) and nucleic acids (ie, siRNA). Cationic PPE polymers could efficiently complex siRNA, and the stability of the nanoparticles could be maintained in physiological solutions and upon freeze-drying and were able to deliver siRNA in vivo when injected intravenously in mice. Commercially available cationic polyethylenimine polymer had LD50 of ca. 61.7 mg/kg in mice, whereas no animal died after injection of the cationic PPE polymer at a dose of >130 mg/kg. Neutral PPE nanoparticles were able to encapsulate two hydrophobic drugs, namely, sorafenib and paclitaxel, which are commonly used for the treatment of hepatocellular carcinoma. Mixing the neutral and cationic PPE nanoparticles did not result in any precipitation, and the size characteristics of both types of nanoparticles were maintained. Hence, PPE polymers might have potential for the delivery of multiple drugs and diagnostic agents to diseased tissues via simple synthesis of the individual polymers and assembly into nanoparticles that can host several drugs while being mixed in the same administration set, which is of importance for industrial and clinical development. Keywords: biodegradable nanoparticles, polyphosphoester, chitosan, polyethylenimine, siRNA, sorafenib, paclitaxel

Multifunctional polyphosphoester-based nanoparticles capable of loading paclitaxel (PTX) both chemically and physically were prepared, achieving an ultrahigh equivalent PTX aqueous concentration of 25.30 mg mL-1. The dual-loaded nanoparticles were effective in killing cancer cells, which has the potential to minimize the amount of nanocarriers needed for clinical applications, due to their ultrahigh loading capacity.