Search

The electroexcitation of the ${\cal N}^*(1440)$ Roper resonance, which defines the first radially excited state of the nucleon, is examined within the soft-wall AdS/QCD model. Such excited Fock states are characterized by the leading three-quark component, which determines the main properties of Roper resonance. The differential configurational entropy (DCE) was used in the nuclear interaction with a gauge vector field for ${\cal N}^*(1440)$ transition. Comparing the main results with the recent data of the CLAS Collaboration at JLab shows a good agreement on the accuracy of the computed data., Comment: 19 pages, 4 figures

Strange axial-vector kaons, $K_1$, and $f_1$ meson resonances are investigated in the 4-flavor AdS/QCD model. Their underlying differential configurational entropy is computed and the mass spectra of higher-excited resonances, in both these mesonic families, are achieved and discussed. This technique merges the 4-flavor AdS/QCD and experimental data regarding the mass spectrum of $K_1$ and $f_1$ meson resonances that have been already detected and reported in the Particle Data Group, also bringing forth a route to explore physical features of the next generation of resonances in the $K_1$ and $f_1$ meson families., Comment: 10 pages, 6 figures

The nuclear configurational entropy (NCE) is employed to derive two parameters encoding the Pomeron Regge trajectory and the spectrum of closed strings, which are also related to the glueball mass, precisely matching data of the TOTEM collaboration at the LHC. In the Regge regime of holographic QCD, the (Reggeized) glueball propagator and the gravitational form factor of the proton occupy a relevant spot in AdS/QCD. They are used for deriving the cross-sections for the TeV scale proton-proton scattering process, which are the main ingredient for computing the NCE. The nuclear configurational stability is also addressed., Comment: 14 pages, 2 figures

In this work, the high energy hadron-hadron scattering is studied in the framework of holographic AdS/QCD models, using the Brower-Polchinski-Strassler-Tan Pomeron exchange kernel and gravitational form factors. We apply the configurational entropy techniques to estimate the slope of the total cross section for the total hadron-hadron cross sections at high energies. A good agreement is derived between our approach and the total cross section for combinations that include the pion-nucleon, nucleon-nucleon, and pion-pion, as well as for any high energy data with inclusion of data from the TOTEM collaboration at the LHC and approximated by the Pomeron exchange. In the case of pion-nucleon and pion-pion scattering, the agreement for the critical points to the differential configurational entropy can be reached within 1.1% even without the involvement of any extra parameters., Comment: 1 figure

In the framework of eikonalized mini-jet model, contributions from gluon recombination effects are studied for the free proton in $pp$ and $\bar p p$ reactions. The nuclear configurational entropy is then used to calculate the main parameters to estimate the total proton cross sections for the recent data LHC, also corroborating to previous developments. Photoproduction cross sections with vector meson dominance and saturation effects for both total hadronic and photonic cross sections at a high energy regime are investigated. Extreme points of the configurational entropy provide the experimentally obtained cross sections within an optimal root-mean-square deviation., Comment: 6 pages, 3 figures

The mass spectroscopy of exotic meson states is scrutinized in the AdS/QCD paradigm. The differential configurational entropy is then used to study, derive, and analyze the mass spectrum of excited exotic vector meson resonances, whose configurational stability is also addressed. For it the hadronic molecule, the hadrocharmonium, and the hybrid description of heavy-quark exotic mesonic states are employed to more precisely match experimental data in the Particle Data Group and also to predict the next generations of heavy-quark QCD exotica in the $Z_c$, $Y$, $\pi_1$, and $Z_b$ exotic meson families., Comment: 9 pages, 8 figs

We study the net-baryon production at forward rapidities within the Color Glass Condensate paradigm. At high energy regime, the leading baryon production mechanism is shown to change from recombination to independent fragmentation. The nuclear configurational entropy (NCE) constructed upon forward scattering amplitudes, allows to predict the two free parameters that govern the anomalous dimension of the target gluon distribution. The global minimum of the NCE indicates a point of stability in pp/pA/AA collisions at LHC energies, corroborating and matching HERA data for hadron spectra measured in pp and dAu collisions at RHIC energies, with accuracy between 1.2\% and 1.8\%, respectively for the two free parameters., Comment: 5 pages, 2 figures

In this paper the nuclear configurational entropy of the energy--energy correlation function is scrutinized, in $e^+e^-$ collisions to hadrons in the back-to-back region, within the QCD perturbative theory. The critical points of the nuclear configurational entropy concept, in the hot nuclear system, is shown to correspond to the critical angle between the two scattered hadrons, corroborating with phenomenological data with great accuracy. The main tools employ the main coefficients of the soft-gluon resummation formula, taking into account logarithmically enhanced contributions up to next-to-next-to-leading logarithmic accuracy., Comment: 6 pages, 1 figure

In the present work the electroproduction for diffractive $\rho$ and $\phi$ mesons by considering AdS/QCD correspondence and Color Glass Condensate (CGC) approximation are studied with respect to the associated dipole cross section, whose parameters are studied and analysed in the framework of the configurational entropy. Our results suggest different quantum states of the nuclear matter, showing that the extremal points of the nuclear configurational entropy is able to reflect a true description of the $\rho$ and $\phi$ mesons production, using current data concerning light quark masses. During the computations parameters, obtained in fitting procedure, coincide to the experimental within 0.1 %., Comment: 5 pages, 2 figures

Mechanism of nuclear reactions on 197Au induced by 11B ions at energies above Coulomb barrier was studied by induced-activity method and gamma-spectroscopy. The cross sections of the reaction fragments from 197Au induced by 11B ions were measured at bombarding energies 137.5 and 255.5 MeV. The fission process was investigated by using multimodal fission approach at the energy 137.5 MeV, and pure symmetric distribution at 255.5 MeV. It was observed that the transferred linear momentum provides the information on the initial projectile-target information. The fissility for both fission reactions under study was deduced from measured fission cross section using the total inelastic cross section. Comparison with proton-induced fission shown, that the linear momentum transferred to the fissile system depends on the probe., Comment: 17 pages, 2 figures, 2 Tables

In this work, we present new experimental data on mass distribution of fission fragments from $^{241}$Am proton-induced fission at $660$ MeV measured at the LNR Phasotron (JINR). The systematic analysis of several measured fragment mass distributions from different fission reactions available in the literature is also presented. The proton-induced fission of $^{241}$Am, $^{237}$Np and $^{238}$U at 26.5, 62.9 and 660 MeV was studied. The proton-induced fission of $^{232}$Th was studied at 26.5, 62.9 and 190 MeV. The fission of $^{208}$Pb also by a proton was investigated at 190, 500 and 1000 MeV. The fission of $^{197}$Au was studied for 190 and 800 MeV protons. Bremsstrahlung reactions with maximum photon energies of 50 and 3500 MeV were studied for $^{232}$Th and $^{238}$U. The framework of the Random Neck Rupture Model was applied in the analysis. The roles of the neutron excess and of the so called fissility parameter were also investigated.

The induced-activity investigations in off-line analysis performed in different experiments, concerning pre-actinide and actinide nuclei, are here presented and discussed. Generalized expressions for the determination of independent yields/cross sections of radioactive nuclei, formed in the targets, are derived and analysed. The fragment mass distribution from U-238, Th-232 and Ta-181 photofission at the bremsstrahlung end-point energies of 50 and 3500 MeV, and from Am-241, U-238 and Np-237 fission induced by 660-MeV protons, are scrutinized from the point of view of the multimodal fission approach. The results of these studies are hence compared with theoretical model calculations using the CRISP code. We subsequently discuss the complex particle-induced reaction, such as heavy-ions and deuterons, by using the thick-target thick-catcher technique and the two-step vector model framework as well. This is accomplished in order to present the investigation of the main processes (fission, spallation and (multi)fragmentation) in intermediate- and high-energy ranges of the incident particle. The set of experimental data, presented in this work, encompasses not merely the data as total production cross sections. Notwithstanding, it further covers other data, as individual yields/cross sections, charge, mass and spin distributions of the reaction fragments, as well as kinematic features. These sources of experimental data can serve as a consistent set of benchmarking data, still necessary for the study of heavy nuclei. Besides, it is also useful for technological applications, from astrophysics and environmental sciences to accelerator technology and accelerator-based nuclear waste transmutation and energy amplification as well., Comment: 29 pages, 19 figures, 3 tables

The independent cross section ratio for production of nuclei from 197Au targets irradiated with 4 GeV deuterons have been measured by off-line gamma-spectroscopy. On the basis of the measured independent cross section ratio of 198m, gAu the average intrinsic angular momentum of the primary nucleus was estimated by means of a simple statistical-model analysis based on the formalism developed by Huizenga and Vandenbosch., Comment: 10 pages, 3 figures, 1 table

The cross sections for the binary fission of 197Au, 181Ta and 209Bi targets induced by 11B ions were measured at intermediate energies. The fission products cross sections were studied by means of activation analysis in off-line regime observed gamma-ray spectra. The fission cross section is reconstructed on the basis of charge and mass distribution of the fission products., Comment: 13 pages, 3 figures, 1 table

The recoil properties of fragments produced by the interaction of 4.4 GeV deuteron with 197Au target have been studied. New experimental data on recoil properties for 90 nuclei, varying from 24Na to 198Au, were obtained. The technique applied was the {thick-target thick-catcher} and induced activity method. The deuteron beam was obtained from the Nuclotron of the Laboratory of High Energies (LHE), Joint Institute for Nuclear Research (JINR), Dubna. The experimental data were analyzed on the basis of the standard two-step vector model formalism. From this analysis we could find evidence to support the existence of several different mechanisms, such as spallation, fission and fragmentation, in the reaction investigated. Fission contributed appreciably to the formation of products in the mass region of 65 < A < 120. The kinematic characteristics of residual nuclei formed in the present deuteron-induced reaction have been compared to those from proton-induced reactions with gold target., Comment: 23 pages, 7 figures, 3 tables

The cross sections of 110 radioactive nuclide with mass numbers 22 < A < 198 amu from the interaction of 2.2 GeV/nucleon deuterons from the Nuclotron of the Laboratory of High Energies (LHE), Joint Institute for Nuclear Research (JINR) at Dubna with a 197Au target are investigated using induced activity method. The results including charge and mass distributions are parameterized in terms of 3-parameter equation in order to complete the real isobaric distribution. Using data from charge distribution total mass-yield distribution was obtained. The analysis of the mass-yield distribution allows to suppose existence of different channels of the interaction such as spallation, deep spallation, fission-like and multifragmentation processes., Comment: 14 pages, 5 figures, 1 table

A study of photofission on 181Ta nucleus induced by bremsstrahlung photons with endpoint energies of 50 and 3500 MeV has been performed. The fission yields have been measured by using the induced-activity method in an off-line analysis. The absolute photofission cross sections for the tantalum target at 50 and 3500 MeV are found to be 5.4 \pm 1.1 microb and 0.77\pm0.11 mb, respectively, and the corresponding deduced fissilities are (0.23\pm0.05) x 10^{-3} and (2.9 \pm 0.9) x 10^{-3}. Mass- and charge-yield distributions were derived from the data. The results were compared with the simulated results from CRISP code for multi-modal fission by assuming symmetrical fission mode., Comment: 18 pages, 2 figures, 3 table

Intermediate energy data of proton-induced fission on 241Am, 238U and 237Np targets were analysed and investigated using the computational simulation code CRISP. Inelastic interactions of protons on heavy nuclei and both symmetric and asymmetric fission are regarded. The fission probabilities are obtained from the CRISP code calculations by means of the Bohr-Wheeler model. The fission cross sections, the fissility and the number of nucleons evaporated by the nuclei, before and after fission, are calculated and compared with experimental data. Some of the model predictions agree completely with the data. We conclude that our two step model of the CRISP code provides a good description of intermediate energy proton-induced fission., Comment: 18 pages, 4 figures, 2 tables. Improved version published

In the given paper the total inelastic cross-sections of the reactions of protons and deuterons on nuclear targets of enriched tin isotopes were compared. The factorization of cross-sections of reactions was discussed. Furthermore, the comparison of theoretical estimations on total inelastic cross-sections with corresponding experimental ones was made., Comment: 7 pages, 6 figures

In this work we present an analysis of the yields of fission fragments induced by bremsstrahlung photons with endpoint energies of 50 and 3500 MeV on 232Th and 238U targets using the simulation code CRISP. A multimodal fission option was added to this code and an extension of the calculation to the properties of the fission products is presented. By dividing the fissioning nuclei according to their fissionability, an approach is introduced which accounts for the contribution of symmetric and asymmetric fission. By adopting this procedure, it was possible to calculate the main parameters for the fission fragment charge distribution such as the most probable charge for a given fission product mass chain and its corresponding width parameter. Also, it was possible to reproduce features of fragment mass distribution and evaluate the fissility of fissioning nuclei for photon-induced fission of 232Th and 238U., Comment: 26 pages, 8 figures, 2 tables. Improve version published

Cross-sections for fragments produced by the fission reaction induced by accelerated 7Li ions impinged into an natPb target at 245 MeV were obtained. We have applied the induced-activation method in off-line analysis. The analysis of charge and mass distributions of fission products allowed the determination of the total fission cross-section for the 7Li+Pb system. The recoil technique (thick target- thick catcher), based on the two step model mathematical formalism, is used to determine the kinematics characteristics of reaction products. Analysis concerning transferred linear momentum provided information on the initial projectile-target interaction, and is compared with proton-induced fission measurements., Comment: 10 pages, 4 figures, 4 tables. Improve version published

In this work we present the results for the investigation of intermediate-mass fragment (IMF) production with the proton-induced reaction at 660 MeV on 238U and 237Np target. The data were obtained with the LNR Phasotron U-400M Cyclotron at Joint Institute for Nuclear Research (JINR), Dubna, Russia. A total of 93 isotopes, in the mass range of 30 < A < 200, were unambiguously identified with high precision. The fragment production cross sections were obtained by means of the induced-activation method in an off-line analysis. Mass-yield distributions were derived from the data and compared with the results of the simulation code CRISP for multimodal fission. A discussion of the super-asymmetric fragment production mechanism is also given., Comment: 20 pages, 2 figure. 2 tables

The analysis of weak variations in the energetic particle flux, as detected by neutron or muon monitors, can often be considerably improved by analysing data from monitor networks and thereby exploiting the spatial coherence of the flux. We present a statistical framework for carrying out such an analysis and discuss its physical interpretation. Two other applications are also presented: filling data gaps and removing trends. This study focuses on the method and its various uses., Comment: 11 pages, 8 figures

We investigate novel approach, which improves the sensitivity of gravitational wave (GW) interferometer due to stochastic resonance (SR) phenomenon, performing in additional nonlinear cavity (NC). The NC is installed in the output of interferometer before photodetector, so that optical signal emerging interferometer incidents on the NC and passes through it. Under appropriate circumstances a specific transformation of noisy signal inside the NC takes place, which results in the increase of output signal-to-noise ratio (SNR). As a result optical noisy signal of interferometer becomes less noisy after passing through the NC. The improvement of SNR is especially effective in bistable NC for wideband (several hundreds Hz) detection, when chirp GW signal is detected. Then SNR gain reaches amount ~ 10. When detection bandwidth is narrowed, the influence of SR mechanism gradually disappears, and SNR gain tends to 1. SNR gain also tends to 1 when the NC is gradually transformed to linear cavity. Proposed enhancement of SNR due to the SR is not dependent of noise type, which is prevalent in interferometer. Particularly proposed approach is capable to increase signal-to-displacement noise ratio., Comment: 24 pages, 10 figures

A novel conception of "sensitive mode" (SM) is proposed to apply in gravitational-wave advanced interferometer configuration. The SM is resonant oscillation of electromagnetic field in "white-light cavity", where the resonance line is broadened without decreasing cavity quality. The frequency of the SM is greatly susceptible to the change of cavity length, and the SM is established in a cavity with time constant smaller than a conventional mode. Due to these advantages the sensitivity and bandwidth of AIC can be increased., Comment: 9 pages, 5 figures

High performance microwave gyroscope (MG) is theoretically developed for the first time to our knowledge. MG is based on Sagnac effect in microwave ring resonator (RR), where a specially taylored phase shifter (PS) on the basis of surface acoustic waves is inserted. Due to that beat frequency becomes proportional to square (or cubic) root upon rotation rate and therefore hugely increases. In the result MG has few order higher sensitivity and dynamic range than state-of-the-art laser gyros, so it can serve as an advanced rotation sensor in navigation and fundamental sciences., Comment: 5 pages, 3 figures