Search

Your search keyword '"Karam, Ayman"' showing total 47 results
Start Over Author "Karam, Ayman"
47 results on '"Karam, Ayman"'

16. Selective radical depolymerization of cellulose to glucose induced by high frequency ultrasound

Author

Haouache, Somia, Karam, Ayman, Chave, Tony, Clarhaut, Jonathan, Amaniampong, Prince Nana, García Fernández, José Manuel, De Oliveira, Karine, Capron, Isabelle, Jérôme, François, Haouache, Somia, Karam, Ayman, Chave, Tony, Clarhaut, Jonathan, Amaniampong, Prince Nana, García Fernández, José Manuel, De Oliveira, Karine, Capron, Isabelle, and Jérôme, François

Abstract

The depolymerization of cellulose to glucose is a challenging reaction and often constitutes a scientific obstacle in the synthesis of downstream bio-based products. Here, we show that cellulose can be selectively depolymerized to glucose by ultrasonic irradiation in water at a high frequency (525 kHz). The concept of this work is based on the generation of Hc and cOH radicals, formed by homolytic dissociation of water inside the cavitation bubbles, which induce the cleavage of the glycosidic bonds. The transfer of radicals on the cellulose particle surfaces prevents the side degradation of released glucose into the bulk solution, allowing maintaining the selectivity to glucose close to 100%. This work is distinguished from previous technologies in that (i) no catalyst is needed, (ii) no external source of heating is required, and (iii) the complete depolymerization of cellulose is achieved in a selective fashion. The addition of specific radical scavengers coupled to different gaseous atmospheres and cOH radical dosimetry experiments suggested that Hc radicals are more likely to be responsible for the depolymerisation of cellulose.

Published
2020

18. High ultrasonic frequencies for selective oxidation of sugars: new investigations and insights

Author

Chatel, Gregory, Amaniampong, Prince, Karam, Ayman, Ortiz Mellet, Carmen, Garcia Fernandez, José, Blériot, Yves, de Oliveira Vigier, Karine, Jérôme, François, Laboratoire de Chimie Moléculaire et Environnement (LCME), Université Savoie Mont Blanc (USMB [Université de Savoie] [Université de Chambéry]), Institut de Chimie des Milieux et Matériaux de Poitiers (IC2MP), Université de Poitiers-Institut national des sciences de l'Univers (INSU - CNRS)-Institut de Chimie du CNRS (INC)-Centre National de la Recherche Scientifique (CNRS), Fédération de recherche INCREASE (INCREASE), Institut des Sciences Moléculaires (ISM), Université Montesquieu - Bordeaux 4-Université Sciences et Technologies - Bordeaux 1-École Nationale Supérieure de Chimie et de Physique de Bordeaux (ENSCPB)-Institut de Chimie du CNRS (INC)-Centre National de la Recherche Scientifique (CNRS)-Université Montesquieu - Bordeaux 4-Université Sciences et Technologies - Bordeaux 1-École Nationale Supérieure de Chimie et de Physique de Bordeaux (ENSCPB)-Institut de Chimie du CNRS (INC)-Centre National de la Recherche Scientifique (CNRS)-Centre de Recherche sur l'Intégration Economique et Financière (CRIEF), Université de Poitiers-Université de Poitiers-LIttoral ENvironnement et Sociétés - UMRi 7266 (LIENSs), Université de La Rochelle (ULR)-Centre National de la Recherche Scientifique (CNRS)-Université de La Rochelle (ULR)-Centre National de la Recherche Scientifique (CNRS)-Institut de Chimie des Milieux et Matériaux de Poitiers (IC2MP), Université de Poitiers-Institut national des sciences de l'Univers (INSU - CNRS)-Institut de Chimie du CNRS (INC)-Centre National de la Recherche Scientifique (CNRS)-Université de Poitiers-Institut national des sciences de l'Univers (INSU - CNRS)-Institut de Chimie du CNRS (INC)-Centre National de la Recherche Scientifique (CNRS)-Institut des Sciences Chimiques de Rennes (ISCR), Centre National de la Recherche Scientifique (CNRS)-Institut de Chimie du CNRS (INC)-Université de Rennes 1 (UR1), Université de Rennes (UNIV-RENNES)-Université de Rennes (UNIV-RENNES)-Ecole Nationale Supérieure de Chimie de Rennes (ENSCR)-Institut National des Sciences Appliquées - Rennes (INSA Rennes), Institut National des Sciences Appliquées (INSA)-Université de Rennes (UNIV-RENNES)-Institut National des Sciences Appliquées (INSA)-Centre National de la Recherche Scientifique (CNRS)-Université de Rennes 1 (UR1), Institut National des Sciences Appliquées (INSA)-Université de Rennes (UNIV-RENNES)-Institut National des Sciences Appliquées (INSA)-Laboratoire de Chimie des Polymères Organiques (LCPO), Centre National de la Recherche Scientifique (CNRS)-Institut Polytechnique de Bordeaux-Ecole Nationale Supérieure de Chimie, de Biologie et de Physique (ENSCBP)-Université de Bordeaux (UB)-Institut de Chimie du CNRS (INC)-Centre National de la Recherche Scientifique (CNRS)-Institut Polytechnique de Bordeaux-Ecole Nationale Supérieure de Chimie, de Biologie et de Physique (ENSCBP)-Université de Bordeaux (UB)-Laboratoire de Génie Chimique (LGC), Université Toulouse III - Paul Sabatier (UT3), Université Fédérale Toulouse Midi-Pyrénées-Université Fédérale Toulouse Midi-Pyrénées-Centre National de la Recherche Scientifique (CNRS)-Institut National Polytechnique (Toulouse) (Toulouse INP), Université Fédérale Toulouse Midi-Pyrénées-Université Toulouse III - Paul Sabatier (UT3), Université Fédérale Toulouse Midi-Pyrénées-Unité de recherche sur les Biopolymères, Interactions Assemblages (BIA), Institut National de Recherche pour l’Agriculture, l’Alimentation et l’Environnement (INRAE)-Institut National de Recherche pour l’Agriculture, l’Alimentation et l’Environnement (INRAE), Instituto de Investigaciones Químicas (IIQ), Universidad de Sevilla-Consejo Superior de Investigaciones Científicas [Madrid] (CSIC), Université Montesquieu - Bordeaux 4-Université Sciences et Technologies - Bordeaux 1 (UB)-École Nationale Supérieure de Chimie et de Physique de Bordeaux (ENSCPB)-Institut de Chimie du CNRS (INC)-Centre National de la Recherche Scientifique (CNRS)-Université Montesquieu - Bordeaux 4-Université Sciences et Technologies - Bordeaux 1 (UB)-École Nationale Supérieure de Chimie et de Physique de Bordeaux (ENSCPB)-Institut de Chimie du CNRS (INC)-Centre National de la Recherche Scientifique (CNRS)-LIttoral ENvironnement et Sociétés (LIENSs), La Rochelle Université (ULR)-Centre National de la Recherche Scientifique (CNRS)-La Rochelle Université (ULR)-Centre National de la Recherche Scientifique (CNRS)-Institut de Chimie des Milieux et Matériaux de Poitiers (IC2MP), Université de Rennes (UR)-Institut National des Sciences Appliquées - Rennes (INSA Rennes), Institut National des Sciences Appliquées (INSA)-Institut National des Sciences Appliquées (INSA)-Ecole Nationale Supérieure de Chimie de Rennes (ENSCR)-Institut de Chimie du CNRS (INC)-Centre National de la Recherche Scientifique (CNRS)-Université de Rennes (UR)-Institut National des Sciences Appliquées - Rennes (INSA Rennes), Institut National des Sciences Appliquées (INSA)-Institut National des Sciences Appliquées (INSA)-Ecole Nationale Supérieure de Chimie de Rennes (ENSCR)-Centre National de la Recherche Scientifique (CNRS)-Laboratoire de Chimie des Polymères Organiques (LCPO), Université de Bordeaux (UB)-Ecole Nationale Supérieure de Chimie, de Biologie et de Physique (ENSCBP)-Institut Polytechnique de Bordeaux-Institut de Chimie du CNRS (INC)-Centre National de la Recherche Scientifique (CNRS)-Université de Bordeaux (UB)-Ecole Nationale Supérieure de Chimie, de Biologie et de Physique (ENSCBP)-Institut Polytechnique de Bordeaux-Centre National de la Recherche Scientifique (CNRS)-Laboratoire de Génie Chimique (LGC), Université de Toulouse (UT)-Université de Toulouse (UT)-Centre National de la Recherche Scientifique (CNRS)-Institut National Polytechnique (Toulouse) (Toulouse INP), Université de Toulouse (UT)-Université Toulouse III - Paul Sabatier (UT3), Université de Toulouse (UT)-Unité de recherche sur les Biopolymères, Interactions Assemblages (BIA), Institut National de Recherche pour l’Agriculture, l’Alimentation et l’Environnement (INRAE)-Institut National de Recherche pour l’Agriculture, l’Alimentation et l’Environnement (INRAE)-Centre de recherche sur l'intégration économique et financière (CRIEF), Université de Poitiers-Université de Poitiers, and Universidad de Sevilla / University of Sevilla-Consejo Superior de Investigaciones Científicas [Madrid] (CSIC)

Subjects
[CHIM.ORGA]Chemical Sciences/Organic chemistry, [CHIM]Chemical Sciences, ComputingMilieux_MISCELLANEOUS
Abstract

International audience

Published
2018

20. The use of albumin solid dispersion to enhance the solubility of unionizable drugs

Author

Khoder, Mouhamad, Abdelkader, Hamdy, ElShaer, Amr, Karam, Ayman, Najlah, Mohammad, and Alany, Raid G.

Abstract

In this study, solid dispersions of prednisolone (PRD) and bovine serum albumin (BSA) were prepared by spray drying and freeze drying methods using a PRD:BSA solution [20:1 molar ratio (MR)]. PRD-BSA dispersed mixtures were characterized by scanning electron microscopy (SEM), and powder X-ray diffraction (XRD), and differential scanning calorimetry (DSC). PRD-BSA physical and dispersed mixtures showed significantly higher solubility in water than that of unprocessed drug. Enhancement factor of six was obtained in both physical mixture and solid dispersion solubility studies. In-vitro dissolution and release studies under physiological conditions showed an immediate release of PRD from the solid dispersions, with almost 90% of the drug dissolved in the first 10 min. PRD was immediately released from BSA binding complex. This study demonstrates the potential for the use of BSA to enhance the solubility and dissolution rate, hence bioavailability, of the unionizable drugs.

Published
2018

23. Mechanocatalytic depolymerization of cellulose with perfluorinated sulfonic acid ionomers

Author

Karam, Ayman, Amaniampong, Prince N., García Fernández, José Manuel, Oldani, C., Marinkovic, Sinisa, Estrine, B., Vigier, K.D.O., Jérôme, F., Karam, Ayman, Amaniampong, Prince N., García Fernández, José Manuel, Oldani, C., Marinkovic, Sinisa, Estrine, B., Vigier, K.D.O., and Jérôme, F.

Abstract

Here, we investigated that the mechanocatalytic depolymerization of cellulose in the presence of Aquivion, a sulfonated perfluorinated ionomer. Under optimized conditions, yields of water soluble sugars of 90-97% were obtained using Aquivion PW98 and PW66, respectively, as a solid acid catalyst. The detailed characterization of the water soluble fraction revealed (i) the selective formation of oligosaccharides with a DP up to 11 and (ii) that depolymerization and reversion reactions concomitantly occurred during the mechanocatalytic process, although the first largely predominated. More importantly, we discussed on the critical role of water contained in Aquivion and cellulose on the efficiency of the mechanocatalytic process.

Published
2018

25. Reduced-Order Dynamic Modeling, Fouling Detection, and Optimal Control of Solar-Powered Direct Contact Membrane Distillation

Author

Karam, Ayman M.

Abstract

Membrane Distillation (MD) is an emerging sustainable desalination technique. While MD has many advantages and can be powered by solar thermal energy, its main drawback is the low water production rate. However, the MD process has not been fully optimized in terms of its manipulated and controlled variables. This is largely due to the lack of adequate dynamic models to study and simulate the process. In addition, MD is prone to membrane fouling, which is a fault that degrades the performance of the MD process. This work has three contributions to address these challenges. First, we derive a mathematical model of Direct Contact Membrane Distillation (DCMD), which is the building block for the next parts. Then, the proposed model is extended to account for membrane fouling and an observer-based fouling detection method is developed. Finally, various control strategies are implemented to optimize the performance of the DCMD solar-powered process. In part one, a reduced-order dynamic model of DCMD is developed based on lumped capacitance method and electrical analogy to thermal systems. The result is an electrical equivalent thermal network to the DCMD process, which is modeled by a system of nonlinear differential algebraic equations (DAEs). This model predicts the water-vapor flux and the temperature distribution along the module length. Experimental data is collected to validate the steady-state and dynamic responses of the proposed model, with great agreement demonstrated in both. The second part proposes an extension of the model to account for membrane fouling. An adaptive observer for DAE systems is developed and convergence proof is presented. A method for membrane fouling detection is then proposed based on adaptive observers. Simulation results demonstrate the performance of the membrane fouling detection method. Finally, an optimization problem is formulated to maximize the process efficiency of a solar-powered DCMD. The adapted method is known as Extremum Seeking (ES). A Newton-based ES is designed and the proposed model is used to accurately forecast the distilled water flux. Although good results are obtained with this method, a practical modification to the ES scheme is proposed to enhance the practical stability.

Published
2016
Full Text
View/download PDF

45. The use of albumin solid dispersion to enhance the solubility of unionizable drugs.

Author

Khoder M, Abdelkader H, ElShaer A, Karam A, Najlah M, and Alany RG

Subjects
Animals, Anti-Inflammatory Agents administration & dosage, Calorimetry, Differential Scanning, Cattle, Desiccation, Drug Compounding, Drug Liberation, Freeze Drying, Prednisolone administration & dosage, Solubility, X-Ray Diffraction, Anti-Inflammatory Agents chemistry, Drug Carriers chemistry, Prednisolone chemistry, Serum Albumin, Bovine chemistry
Abstract

In this study, solid dispersions of prednisolone (PRD) and bovine serum albumin (BSA) were prepared by spray drying and freeze drying methods using a PRD:BSA solution [20:1 molar ratio (MR)]. PRD-BSA dispersed mixtures were characterized by scanning electron microscopy (SEM), and powder X-ray diffraction (XRD), and differential scanning calorimetry (DSC). PRD-BSA physical and dispersed mixtures showed significantly higher solubility in water than that of unprocessed drug. Enhancement factor of six was obtained in both physical mixture and solid dispersion solubility studies. In-vitro dissolution and release studies under physiological conditions showed an immediate release of PRD from the solid dispersions, with almost 90% of the drug dissolved in the first 10 min. PRD was immediately released from BSA binding complex. This study demonstrates the potential for the use of BSA to enhance the solubility and dissolution rate, hence bioavailability, of the unionizable drugs.

Published
2018
Full Text
View/download PDF

46. Rational design of sugar-based-surfactant combined catalysts for promoting glycerol as a solvent.

Author

Karam A, Villandier N, Delample M, Koerkamp CK, Douliez JP, Granet R, Krausz P, Barrault J, and Jérôme F

Subjects
Catalysis, Drug Design, Emulsions, Epoxy Compounds chemistry, Micelles, Molecular Sequence Data, Molecular Structure, Molecular Weight, Carbohydrates chemistry, Glycerol chemistry, Solvents chemistry, Surface-Active Agents chemistry
Published
2008
Full Text
View/download PDF

47. Selectivity enhancement of silica-supported sulfonic acid catalysts in water by coating of ionic liquid.

Author

Gu Y, Karam A, Jérôme F, and Barrault J

Abstract

Coating of silica-supported sulfonic acid catalysts with hydrophobic ionic liquid leads to a significant improvement of catalyst selectivity. Many organic reactions, including Prins cyclization, cycloaddition of epoxide to aldehyde, and dehydrative etherification of secondary benzyl alcohols, proceed well in formalin or pure water. In particular, tandem dehydration/Prins cyclization reactions of tertiary and secondary alcohols with formaldehyde were developed for the first time.

Published
2007
Full Text
View/download PDF

Catalog

Books, media, physical & digital resources
See catalog results