Search

This study examines the correlation between solar UVB and different weather parameters in Kuwait climate. To achieve that purpose, an experimental outdoor facility is designed and set up at the College of Technological Studies, Kuwait for regular monitoring of solar global radiation, UVB radiation and ambient temperature in Kuwait from beginning of January 1st 2014 until the end of December 2019. Outcomes reveal that the change of solar UVB as well as global radiation through the whole day inaugurate the same behavior for the recorded data in clear day times. Statistical analysis is carried out to obtain a correlation linking UVB radiation and both ambient temperature and global solar radiation. Regression analysis of the current work shows that there is a solid correlation among UVB radiation and both ambient temperature and global solar radiation, especially for intermediate to small global solar radiation ranges. In addition, UV index is evaluated for various months at all day times. It is important to record that UV index with the maximum values is attained in May-August months through midday period. Also, UV index values do not surpass the accepted extreme value which is higher than 9 during any time of the study period.

Energy consumption in buildings is considered a significant portion of gross power dissipation, so a great effort is required to design efficient construction. In severe hot weather conditions as Kuwait, energy required for building cooling and heating results in a huge energy loads and consumption and accordingly high emission rates of carbon dioxide. So, the main purpose of the current work is to convert the existing institutional building to near net-zero energy building (nNZEB) or into a net-zero energy building (NZEB). A combination of integrated high concentrated photovoltaic (HCPV) solar modules and evacuated tube collectors (ETC) are proposed to provide domestic water heating, electricity load as well as cooling consumption of an institutional facility. An equivalent circuit model for single diode is implemented to evaluate triple junction HCPV modules efficiency considering concentration level and temperature effects. A code compatible with TRNSYS subroutines is introduced to optimize evacuated tube collector efficiency. The developed models are validated through comparison with experimental data available from literature. The efficiency of integrated HCPV-ETC unit is optimized by varying the different system parameters. Transient simulation program (TRNSYS) is adapted to determine the performance of various parts of HCPV-ETC system. Furthermore, a theoretical code is introduced to evaluate the environmental effects of the proposed building when integrated with renewable energy systems. The integrated HCPV-ETC fully satisfies the energy required for building lighting and equipment. Utilizing HCPV modules of orientation 25? accomplishes a minimum energy payback time of about 8 years. Integrated solar absorption chiller provides about 64% of the annual air conditioning consumption needed for the studied building. The energy payback period (EPT) or solar cooling system is about 18 years which is significantly larger than that corresponding to HCPV due to the extra expenses of solar absorption system. The life cycle savings (LCS) of solar cooling absorption system is approximately $2400/year. Furthermore, levelized cost of energy of solar absorption cooling is $0.21/kWh. Hence, the net cost of the solar system after subtracting the CO2 emission cost will be close to the present price of conventional generation in Kuwait (about $0.17/kWh). Finally, the yearly CO2 emission avoided is approximately 543 ton verifying the environmental benefits of integrated HCPV-ETC arrangements in Kuwait.

This work investigates the performance of combined hybrid high concentrated photovoltaic/thermal collector (HCPV/T) in Kuwait harsh climate. The proposed system consists of triple junction solar cells (InGaP/InGaAs/Ge) attached to heat source to discharge thermal energy to cooling media. Published HCPV/T models do not consider the effect of shunt resistance which greatly affects the system performance. So, a single diode model employing five parameters including the effect of shunt resistance is adapted to analyze the proposed system. To analyze the thermal performance of the proposed system, a two-dimensional thermal model based on the technique of finite difference is introduced to determine the efficiency of the hybrid HCPV/T system. The present developed subroutines are integrated with other involved codes in TRNSYS software to calculate HCPV/T system efficiency. Electrical and thermal as well as the whole system efficiency at different weather circumstances are evaluated and assessed. The effect of different weather conditions, cell temperature, concentration ratio and the temperatures of the coolant fluid on system performance are studied. Current results indicate that the model of single diode is a reliable one rather than using the two-diode complex model. Compared to measurements provided by high concentrated PV manufacturer, the current results revealed a total root mean square error of approximately 1.94%. Present predictions show that PV cell temperature has logarithmic increase with the rise in concentration ratio but with low values till concentration ratio of 400 suns after that the rise is faster at higher concentration values up to 1500 suns. Results also revealed that hybrid HCPV/T system works effectively specially in severe hot climate where thermal efficiency increases with high surrounding temperature for higher values of concentration ratio. In addition, an increase of approximately 15% in thermal efficiency and 10% in total efficiency can be achieved by utilizing active cooling device in HCPV/T system.

High concentrated PV multi-junction solar cells (HCPV) likely present a favorable alternative to achieve low cost of energy. However, multi-junction solar cell has different characteristics which should be settled before they can be adapted for large scale energy generation. Peak energy consumption in Kuwait usually occurs in periods of utilizing air conditioning systems which are essentially used in almost all year around in harsh climate like Kuwait. Power consumed at peak times is more costly than power needed to satisfy loads at regular consumption times. The main goal of the present research is to increase HCPV solar cells’ efficiency, to decrease maximum power cost in Kuwait. Multi-junction solar cells performance in weather conditions of Kuwait is investigated employing a single diode equivalent circuit model. The model developed considers the impacts of concentration ratio as well as temperature. Most research in literature review usually neglects shunt resistance of the diode, however this resistance is taken into consideration in current developed theoretical model. To calibrate the present model, current predictions are compared with corresponding measured data provided by multi-junction solar cell manufacturer. The total root mean square errors in the present model predictions are about 1.8%. This means that current developed model of single diode model which takes into account shunt resistance impacts gives precise and reliable data. HCP electrical efficiency is noticed to rise as concentration increases but to a certain concentration value, then it begins to decrease. In addition, utilizing HCPV linked to grid satisfies great decrease in maximum load. Power produced from HCPV modules is utilized to provide energy needs to a family in normal Kuwaiti family home to evaluate HCPV environmental effects. HCPV modules slopes and areas are changed to accomplish peak energy production all over the year. Present results reveal that optimum power production corresponds to HCPV modules directed to south and having latitude of 25°. In addition, employing HCPV modules can avoid approximately 1.55 ton of emitted CO2 per year. In conclusion, current work reveals the advantage impacts of grid connected HCPV in Kuwait weather.

Thiel embalming has been gaining a great deal of worldwide attention. Its long-lasting life-like quality enables multiple applications in surgical training programs. The standard process of Thiel embalming, which involves perfusion of embalming fluid in fresh cadavers through cannulation of the arterial and venous systems could be difficult in some areas of the world where fresh body donation rates are low or banned. This study will assess the ability to Thiel embalm fresh frozen mice as an animal model as a solution for the lack of fresh cadavers. The ability of Thiel embalming frozen tissue would enable areas in the world where they do not have access to recently diseased donated cadavers. The study was ethically approved King Fahad Medical City Institutional Review Board. The 20 Mice cadavers were ethically gained from the university of Dundee animal house. They were euthanized ethically by carbon dioxide. They were handled by following the university’s ethical code. The mice were split into 4 groups with 5 mice for each group, where group 1 is fresh unfixed. Group 2 standard Theil embalmed. Group 3 defrosted one-week frozen mice then standard embalmed. group 4 perfused with Theil fluid, frozen, defrosted then set in the embalming tank. The embalming validation tests were made by visual gross and histological changes in the gastric, renal and muscular tissue. These tissues were chosen to test the penetration of the embalming solution. The results show similarity in all groups with difference of internal gross changes in the pre-frozen cadavers. Histological changes were similar in all embalmed groups meaning that the embalming method has been successful from a histological point of view.