Search

The technology of reconfigurable intelligent surfaces (RIS) has been showing promising potential in a variety of applications relying on Beyond-5G networks. Reconfigurable intelligent surface (RIS) can indeed provide fine channel flexibility to improve communication quality of service (QoS) or restore localization capabilities in challenging operating conditions, while conventional approaches fail (e.g., due to insufficient infrastructure, severe radio obstructions). In this paper, we tackle a general low-complexity approach for optimizing the precoders that control such reflective surfaces under hardware constraints. More specifically, it allows the approximation of any desired beam pattern using a pre-characterized look-up table of feasible complex reflection coefficients for each RIS element. The proposed method is first evaluated in terms of beam fidelity for several examples of RIS hardware prototypes. Then, by means of a theoretical bounds analysis, we examine the impact of RIS beams approximation on the performance of near-field downlink positioning in non-line-of-sight conditions, while considering several RIS phase profiles (incl. directional, random and localization-optimal designs). Simulation results in a canonical scenario illustrate how the introduced RIS profile optimization scheme can reliably produce the desired RIS beams under realistic hardware limitations. They also highlight its sensitivity to both the underlying hardware characteristics and the required beam kinds in relation to the specificity of RIS-aided localization applications., 27 pages, 8 figures, journal

Exploiting wavefront curvature enables localization with limited infrastructure and hardware complexity. With the introduction of reconfigurable intelligent surfaces (RISs), new opportunities arise, in particular when the RIS is functioning as a lens receiver. We investigate the localization of a transmitter using a RIS-based lens in close proximity to a single receive antenna element attached to reception radio frequency chain. We perform a Fisher information analysis, evaluate the impact of different lens configurations, and propose a two-stage localization algorithm. Our results indicate that positional beamforming can lead to better performance when a priori location information is available, while random beamforming is preferred when a priori information is lacking. Our simulation results for a moderate size lens operating at 28 GHz showcased that decimeter-level accuracy can be attained within 3 meters to the lens.

We consider the problem of joint three-dimensional localization and synchronization for a single-input single-output (SISO) system in the presence of a reconfigurable intelligent surface (RIS), equipped with a uniform planar array. First, we derive the Cram\'er-Rao bounds (CRBs) on the estimation error of the channel parameters, namely, the angle-of-departure (AOD), composed of azimuth and elevation, from RIS to the user equipment (UE) and times-of-arrival (TOAs) for the path from the base station (BS) to UE and BS-RIS-UE reflection. In order to avoid high-dimensional search over the parameter space, we devise a low-complexity estimation algorithm that performs two 1D searches over the TOAs and one 2D search over the AODs. Simulation results demonstrate that the considered RIS-aided wireless system can provide submeter-level positioning and synchronization accuracy, materializing the positioning capability of Beyond 5G networks even with single-antenna BS and UE. Furthermore, the proposed estimator is shown to attain the CRB at a wide interval of distances between UE and RIS. Finally, we also investigate the scaling of the position error bound with the number of RIS elements., Comment: Submitted to ICC 2021

Modular optical switch architectures combining wavelength routing based on arrayed waveguide grating (AWG) devices and multicasting based on star couplers hold promise for flexibly addressing the exponentially growing traffic demands in a cost- and power-efficient fashion. In a default switching scenario, an input port of the AWG is connected to an output port via a single wavelength. This can severely limit the capacity between broadcast domains, resulting in interdomain traffic switching bottlenecks. An unexplored solution to this issue is to exploit multiple AWG free spectral ranges (FSRs), i.e., to set up multiple parallel connections between each pair of broadcast domains. In this paper, we study, for the first time, the influence of the FSR count on the throughput of a multistage switching architecture and propose a generic and novel analytical framework to estimate the blocking probability. We assess the accuracy of our analytical results via Monte Carlo simulations. Our study points to significant improvements with a moderate increase in the number of FSRs. We show that an FSR count beyond four results in diminishing returns. Furthermore, to investigate the tradeoffs between the network- and physical-layer effects, we conduct a cross-layer analysis, taking into account pulse amplitude modulation and rate-adaptive forward error correction. We illustrate how the effective bit rate per port increases with an increase in the number of FSRs.

Deploying periodic inline chromatic dispersion compensation enables reducing the complexity of the digital back propagation (DBP) algorithm. However, compared with nondispersion-managed (NDM) links, dispersion-managed (DM) ones suffer a stronger cross-phase modulation (XPM). Utilizing per-channel dispersion-managed (CDM) links (e.g., using fiber Bragg grating) allows for a complexity reduction of DBP, while abating XPM compared to DM links. In this paper, we show for the first time that CDM links enable also a more effective XPM compensation compared to NDM ones, allowing a higher achievable information rate (AIR). This is explained by resorting to the frequency-resolved logarithmic perturbation model and showing that per-channel dispersion compensation increases the frequency correlation of the distortions induced by XPM over the channel bandwidth, making them more similar to a conventional phase noise. We compare the performance (in terms of the AIR) of a DM, an NDM, and a CDM link, considering two types of mismatched receivers: one neglects the XPM phase distortion and the other compensates for it. With the former, the CDM link is inferior to the NDM one due to an increased in-band signal--noise interaction. However, with the latter, a higher AIR is obtained with the CDM link than with the NDM one owing to a higher XPM frequency correlation. The DM link has the lowest AIR for both receivers because of a stronger XPM.

Reconfigurable intelligent surfaces (RISs) are set to be a revolutionary technology in the 6th generation of wireless systems. In this work, we study the application of RIS in a multi-user passive localization scenario, where we have one transmitter (Tx) and multiple asynchronous receivers (Rxs) with known locations. We aim to estimate the locations of multiple users equipped with RISs. The RISs only reflect the signal from the Tx to the Rxs and are not used as active transceivers themselves. Each Rx receives the signal from the Tx (LOS path) and the reflected signal from the RISs (NLOS path). We show that users' 3D position can be estimated with submeter accuracy in a large area around the transmitter, using the LOS and NLOS time-of-arrival measurements at the Rxs. We do so, by developing the signal model, deriving the Cramer-Rao bounds, and devising an estimator that attains these bounds. Furthermore, by orthogonalizing the RIS phase profiles across different users, we circumvent inter-path interference.

Reconfigurable intelligent surfaces (RISs) have the potential to enable user localization in scenarios where traditional approaches fail. Building on prior work in single-antenna RIS-enabled localization, we investigate the potential to exploit wavefront curvature in geometric near-field conditions. Via a Fisher information analysis, we demonstrate that while near-field improves localization accuracy mostly at short distances when the line-of-sight (LoS) path is present, it could still provide reasonable performance when this path is blocked by relying on a single RIS reflection., Comment: 5 pages, 6 figures, SPAWC21 conference

The standard solution for short-haul fiber-optic communications is to deploy noncoherent systems, i.e., to modulate and detect only the light intensity. In such systems, the signal is corrupted with optical noise from amplifiers and with thermal (electrical) noise. The capacity of noncoherent optical links has been studied extensively in the presence of either optical noise or thermal noise. In this paper, for the first time, we characterize the capacity under an average power constraint with both noise sources by establishing upper and lower bounds. In the two extreme cases of zero optical noise or zero thermal noise, we assess our bounds against some well-known results in the literature; improvements in both cases are observed. Next, for amplified fiber-optic systems, we study the trade-off between boosting signal energy (mitigating the effects of thermal noise) and adding optical noise. For a wide spectrum of system parameters and received power levels, we determine the optimal amplification gain. While mostly either no amplification or high-gain amplification is optimal, the best performance is for some parameter intervals achieved at finite gains.

We propose a modular star-coupler-based switch architecture along with a scalable multicast scheduling algorithm to enable all-optical multicasting among data center nodes. With broadcast domain partitioning in a 126-port switch, we achieve up to 24% improvement in the maximum achievable throughput.

We design a novel receiver based on the theoretical finding that the linear phase noise is uncorrelated with the nonlinear phase noise. The implementation of the proposed receiver is straightforward and it performs almost equally to the optimal detector at a much lower complexity.

We examine the feasibility of ultrahigh-scale datacenter multicasting by simultaneously taking into account the choice of architecture, modulation, and coding. Our Monte Carlo simulations indicate the dominant impact of in-band crosstalk on the throughput performance.

An upper bound on the capacity of the nondispersive optical fiber channel is presented. This bound, which is valid for arbitrary launch powers, confines the capacity within a much narrower range compared to what the previously known upper bound provided.

Matched filtering and sampling, which is known to be the optimal receiver for the linear additive white Gaussian noise channel, is in general suboptimal for a nonlinear medium. Nonetheless, it is commonly used in fiber-optical communication systems with nonlinear distortion. In this paper, a novel demodulation scheme is proposed for a two-user memoryless interference channel, with a type of nonlinear crosstalk that occurs in wavelength-multiplexed optical transmission. We show by simulations that by using this demodulation scheme, unlike matched filtering and sampling, the symbol error rate decreases to zero in the high-power regime.

Hybrid networking, based on electronic packet switching and optical circuit switching, has been proposed to resolve the existing switching bottlenecks in data centers in an energy-efficient and cost-effective fashion. We consider the problem of resource provisioning in hybrid data centers in terms of optical circuit switching capacity and granularity. The number of fibers connected to server racks, the number of wavelengths per fiber, and the ratio of capacity provided by the optical circuit-switched portion of the network to that of the electronic packet-switched portion are crucial design parameters to be optimized during the data center planning phase. These parameters in conjunction with the additive-increase, multiplicative-decrease (AIMD) congestion control mechanism of the Transmission Control Protocol (TCP) pose a significant impact on data center network performance. In this paper, we examine the combined impact of optical bandwidth settings and TCP dynamics using event-driven simulations. Our analysis reveals the strong dependence of overall network throughput on channel capacity (i.e., the bit rate per wavelength channel) and points to the advantages of optical bandwidth consolidation employing higher-order modulation formats.

Elastic optical networks have been proposed to support high data rates in metro and core networks. However, frequency allocation of the channels (i.e., channel ordering) in such networks is a challenging problem. This requires arranging the optical channels within the frequency grid with the objective of ensuring a minimum signal-to-noise ratio (SNR). An optimal arrangement results in the highest SNR margin for the entire network. However, determining the optimal arrangement requires an exhaustive search through all possible arrangements (permutations) of the channels. The search space increases exponentially with the number of channels. This discourages an algorithm employing an exhaustive search for the optimal frequency allocation. We utilize the Gaussian noise (GN) model to formulate the frequency allocation (channel ordering) problem as a variant of the traveling salesman problem (TSP) using graph theory. Thereafter, we utilize graph-theoretic tools for the TSP from the existing literature to solve the channel ordering problem. Performance figures obtained for the proposed scheme show that it is marginally inferior to the optimal search (through all possible permutations) and outperforms any random allocation scheme. Moreover, the proposed scheme is implementable for a scenario with a large number of channels. In comparison, an exhaustive search with the GN model and split-step Fourier method simulations are shown to be feasible for a small number of channels only. It is also illustrated that the SNR decreases with an increase in bandwidth when the frequency separation is high.