Search

The application of inductively coupled plasma mass spectrometry (ICP-MS), both in solution and laser ablation (LA) mode, and instrumental neutron activation analysis (INAA) in the nuclear material analysis are presented in this paper. The possibility of each technique for the chemical characterization of substances used during TRISO fuel production and its advantages and limitations are discussed based on the obtained results of the analysis of real materials used in TRISO fuel production in the Institute of Nuclear Chemistry and Technology. The paper also reports the application of INAA and LA-ICP-MS to the verification of the purity of the protective layers of pyrolytic carbon (PyC) and silicon carbide.

This work reports the possibility of uranium recovery from a post-mining uranium ore dump in Poland by a bioleaching method. The studies were conducted on the dump leaching model with the mass of 570 kg of uranium bearing mineral material from Radoniów pile and in the periodic bioreactor with a work volume of 80 dm3 and with mechanical mixing and aeration of the charge. The uranium concentration in the examined material was about 800 ppm. In this process, the consortium of microorganisms isolated from former mines was used. It was composed of the following microorganisms: Bacillius, Pseudomonas, Sphingomonas, Thiobacillus, Halothiobacillus, Thiomonas, and Geothrix. The efficiency of the uranium bioleaching process was 98% in the reactor, and a yield of 70% was obtained in the dump leaching model. The post-leaching solution contained significant amounts of uranium ions that were separated in two stages: (1) by ion chromatography and then (2) by a two-step precipitation method. The resulting solution was a source of ammonium diuranate, the precursor of yellowcake (uranium oxides).

Solvent extraction of metals from Ti ore was investigated with a view of enhancing extraction yields by changing the concentration of the ligands, the rate of mixing, the pH, and the temperature of the solution. Norwegian Ti ore was leached with 5M HNO3 alongside 10% ascorbic acid to obtain a pregnant solution containing transition metals and some rare earth elements (REEs). Part Two of the study will address the recovery of the REEs in the ore. The elemental analysis of solid and aqueous samples was done by two models of total reflection X-ray fluorescence spectrometers (S2 PICOFOX, Bruker Corporation, Berlin, Germany; and T-STAR, Bruker Corporation, Berlin, Germany). The same analysis was repeated using an inductively coupled plasma-mass spectrometer (Perkin Elmer Sciex ELAN DRC II, Perkin Elmer, Waltham, MA, USA). The extraction process and parameters were examined by ICP-MS. The extraction efficiencies were studied under different conditions through the use of various concentrations of ligands at different pHs, temperatures, and mixing rates of the solution. At pH 1.0, 22.5 °C, and a mixing rate of 1400 rpm, the selectivity of 150 g/L trioctyl methyl ammonium chloride (Aliquat 336) was 99% Ti4+, 94% V4⁺, and 82% Hf4+, while 99% of Co2⁺ was recovered at pH 0.8. The extraction efficiency of triethyl phosphate (10% TEP) was 58% Cu2⁺, 68% Mn2⁺, and 63% V4⁺ at 55 °C, 1400 rpm, and without a pH change. Tributyl phosphate (10% TBP) was able to retrieve 87% Cu2⁺ and 78% Zn2⁺ at pH 1.3, 1400 rpm, and 22.5 °C, and 80% Ti4+ at pH 1.2. A 10% solution of 2,4,6-tris (allyloxy)-1,3,5-triazine (TAOT) demonstrated 61% Mn2⁺ and 56% Hf4+ extraction at pH 1.3, 22.5 °C, and 1400 rpm. Under the same conditions, 10% methyl salicylate (MS) was able to recover 56% Hf4+ at pH 1.3. Using 1400 rpm, di (2-ethylhexyl) phosphoric acid (10% D2EHPA) was found to selectively extract 87% Hf4+ at 22.5 °C without a pH change, and around 99% Co2⁺, Ti4+, and Fe2⁺ at pH 1.3. This study provides valuable insights into optimizing solvent extraction conditions for transition metals' recovery and serves as a precursor to future research on the extraction of REEs from Ti ores. This process is relevant from the environmental and economic perspectives since it provides the best approach to recycling metals to reduce the rate of raw ore mining. [ABSTRACT FROM AUTHOR]

With advancements in hardware and software, non-destructive radiometric analytical methods have become popular in a wide range of applications. A typical case is the study of the leaching process of metals from mineral ores and mine tailings. The objective of the current study was to develop a radiometric method based on neutron activation analysis (NAA), in particular, delayed gamma neutron activation analysis (DGNAA), to monitor the process of Mn and Zn leaching from Ti ore, Cu mine tailings, and Zn-Pb mine tailings. The DGNAA method was performed using a neutron source: a deuterium-tritium (D-T) neutron generator for Mn and a MARIA research nuclear reactor for Zn. Laboratory-scale Mn leaching from Ti ores, Cu tailings, and Zn-Pb tailings was investigated using delayed gamma-rays of 56Mn (half-life of 2.6 h). The dissolution efficiencies of Mn were found to increase with interaction time and HCl concentration (1 to 5 M) and to vary with the leaching temperature (22.5 to 110 °C). Such results were found to agree with those obtained by total reflection X-ray fluorescence (TXRF) spectrometry for the same samples. 65Zn (half-life of 244 days) was chosen to investigate real-time/online leaching of Zn in Ti ore, Cu tailings, and Zn-Pb tailings. During online monitoring, Zn recovery was also reported to increase with increased leaching time. After approximately 300 min of leaching, 80%, 79%, and 53% recovery of Zn in Zn-Pb tailings, Ti ore, and Cu tailings, respectively, were reported. Theoretically, developed mathematical prediction models for 65Zn radiotracer analysis showed that the spherical diffusion model requires much less time to attain saturation compared to the linear diffusion model. The results of NAA for Zn were compared with those obtained by handheld X-ray fluorescence (handheld-XRF) and TXRF analysis. The analyzed samples encompassed leached Ti ore, Cu tailings, and Zn-Pb tailings which were subjected to different conditions of leaching time, temperature, and HCl concentrations. The XRF analysis confirmed that the leaching efficiencies of Zn rise with the increase in leaching time and HCl concentration and fluctuate with leaching temperature. The developed approach is important and can be applied in laboratories and industrial setups for online monitoring of the recovery of any element whose isotopes can be activated using neutrons. The efficiency of the metal-recovery process has a direct impact on the normal operation and economic advantages of hydrometallurgy. [ABSTRACT FROM AUTHOR]

Graphene oxide (GO) chemically modified with manganese oxide (GO-MnO2) has been used as a sorbent in the radioanalytical determinations. The sorption of selected elements in dependence on pH has been evaluated in batch and column experiments. For the batch technique, the results of the experiments demonstrated that alkali metals were not removed from aqueous solutions over the entire pH range and removal of other elements strongly depends on acidity of the solution. Two examples: determination of Pt and Th in biological materials by radiochemical neutron activation analysis and separation of gamma-ray radionuclides from environmental samples have been described in details. [ABSTRACT FROM AUTHOR]

The preparation, certification, and characterization of two new biological certified reference materials for inorganic trace analysis have been presented. They are based on two different varieties of tobacco leaves, namely, Oriental Basma Tobacco Leaves (INCT-OBTL-5), grown in Greece, and Polish Virginia Tobacco Leaves (INCT-PVTL-6), grown in Poland. Certification of the materials was based on the statistical evaluation of results obtained in a worldwide interlaboratory comparison, in which 87 laboratories from 18 countries participated, providing 2568 laboratory averages on nearly 80 elements. It was possible to establish the certified values of concentration for many elements in the new materials, that is, 37 in INCT-OBTL-5 and 36 in INCT-PVTL-6, including several toxic ones like As, Cd, Hg, Pb, and so forth. The share and the role of instrumental analytical techniques used in the process of certification of the new CRMs are discussed.