Search

Microfracture density in fault damage zones can reflect spatial variability that decays in intensity as a function of distance from the fault, which is crucial in understanding the mechanical, seismological, and fluid-flow properties of the fault system. However, few studies explored the characteristics of fracture density between the two sides of active dip-slip faults due to rare field observations. Here, we measured and modeled microfractures across an active thrust fault associated with the 2008 Mw 7.9 Wenchuan earthquake in the Longmen Shan, eastern Tibetan Plateau. The results showed that the microfracture density at the Qingping site developed more intensely in the hanging wall than in the footwall for an exposed thrust fault, indicating an asymmetrical pattern. The hidden thrust fault at the Jushui site showed that microfractures developed more intensely in vertical planes in the hanging wall than in the footwall, whereas microfractures developed similarly in horizontal planes within the two sides, indicating a quasiasymmetrical pattern. Comparing the data at the two sites with computational modeling, we suggest that fault geometry might exert a first-order control of the asymmetrical microfracture density pattern, which is helpful for revealing different deformational behaviors of rock masses in the fault damage zones and better understanding the hanging-wall effect for evaluating seismic hazards on active thrust faults.

AbstractStepovers have been widely suggested to be important structural boundaries that control earthquake rupture extent and therefore the size of earthquakes. Previous studies suggested that ~4-5 km wide stepovers are likely to arrest fault rupture. However, recent earthquake cases show that even much wider stepovers (e.g., ≥7-8 km wide) sometimes may not effectively impede seismic rupture propagation, which requires us to further explore cascading rupture mechanism of large earthquakes at wider stepovers. Here, we constrained slip rates and paleoseismic earthquakes of two fault sections that bound a constraining stepover with width of approximately 7-8 km along the southern segment of the Daliangshan fault along the southeastern margin of the Tibetan Plateau. Multiple landform offset and radiocarbon dating results constrained that the two fault sections show a moderate slip rate at approximately 5 mm/yr. Moreover, three or four paleoseismic events Z through W, in 1489 AD, 620-515 BC, 4475-3700 BC, and 6265-4510 BC, were revealed on the Jiaojihe fault section. Based on the aforementioned results, we suggest that the most recent seismic event might exhibit a jump over the restraining stepover, whereas ruptures of the older events might be arrested by the stepover. Furthermore, we suggest that moderate slip-rate faults might have similar potential with that of high slip-rate faults to rupture through wider stepovers, which increases us in understanding the generation of cascading ruptures on strike-slip faults and is helpful for evaluating seismic hazards.

Abstract Background Supracrestal gingival tissue dimensions (SGTDs) has been considered to be an essential element of periodontal phenotype (PP) components. This study aimed to explore the relationship between SGTDs and other PP components by digital superposition method that integrated cone beam computed tomography (CBCT) with intraoral scanning. Methods This cross-sectional study was conducted at the Stomatology Hospital of Fujian Medical University. Participants were recruited based on the inclusion and exclusion criteria. The data obtained from the digital scanner (TRIOS 3, 3Shape, Denmark) and CBCT images were imported into the TRIOS software (Implant Studio, 3Shape, Denmark) for computing relevant parameters. The significant level was set at 0.05. Results A total of 83 participants with 498 maxillary anterior teeth were finally included. The mean values of supracrestal gingival height (SGH) and the distance from the cementoenamel junction (CEJ) to the crest of the alveolar ridge (CEJ-ABC) on the buccal site were significantly higher than palatal SGH (SGH-p) and palatal CEJ-ABC (CEJ-ABC-p). Men exhibited taller CEJ-ABC and SGH-p than women. Additionally, tooth type was significantly associated with the SGH, SGH-p and CEJ-ABC-p. Taller SGH was associated with wider crown, smaller papilla height (PH), flatter gingival margin, thicker bone thickness (BT) and gingival thickness (GT) at CEJ, the alveolar bone crest (ABC), and 2 mm apical to the ABC. Smaller SGH-p displayed thicker BT and GT at CEJ, the ABC, and 2 and 4 mm apical to the ABC. Higher CEJ-ABC showed lower interproximal bone height, smaller PH, flatter gingival margin, thinner GT and BT at CEJ, and 2 mm apical to the ABC. Smaller CEJ-ABC-p displayed thicker BT at CEJ and 2 and 4 mm apical to the ABC. On the buccal, thicker GT was correlated with thicker BT at 2 and 4 mm below the ABC. Conclusion SGTDs exhibited a correlation with other PP components, especially crown shape, gingival margin and interdental PH. The relationship between SGTDs and gingival and bone phenotypes depended on the apico-coronal level evaluated. Trial registration This study was approved by the Biomedical Research Ethics Committee of Stomatology Hospital of Fujian Medical University (approval no. 2023-24).

Abstract Background Overerupted maxillary molars is common in adults, which can lead to insufficient intermaxillary vertical space ,great difficulty in prosthetic reconstruction ,and cause occlusal interference in movements.To reconstruct occlusal function, it is necessary to prepare enough space for prostheses. The aim of the present study was to evaluate the effect of space-adjustment occlusal splint on overerupted maxillary molars by clinical and electromyographic signals analysis. Methods Eighteen patients with overerupted maxillary molars were selected to wear space-adjustment occlusal splint suppressing overerupted maxillary molars for three months. Satisfaction was assessed by 5-point Likert; intermaxillary vertical space and the teeth transportation distance were measured in models; clinical periodontal status were evaluated by periodontal probing depth (PPT) and bleeding index (BI); electromyographic recordings of the masseter and anterior temporal muscles were monitored by Cranio-Mandibular K7 Evaluation System. Results All the patients were satisfied with the treatment effect (Likert scale ≧ 4). The intermaxillary space in edentulous areas after treatment showed statistically significant increasing when compared with those before treatment. PPT and BI showed no significant difference. No statistically significant differences were found in electromyographic activity of anterior temporal muscles, while a reduction of muscle activity in masseter in the contralateral side were detected in post-treatment evaluations compared with pre-treatment at mandibular rest position. Conclusions Space-adjustment occlusal splint is an efficient treatment option on overerupted maxillary molars by intruding the maxillary molar to obtain adequate intermaxillary space for prostheses.

Abstract Background The outer membrane vesicles (OMVs) derived from Porphyromonas gingivalis (P. gingivalis) have long been acknowledged for their crucial role in the initiation of periodontitis. However, the implications of P. gingivalis OMVs in the context of cardiovascular disease (CVD) remain incompletely understood. This study aimed to clarify both the impact and the underlying mechanisms through which P. gingivalis OMVs contribute to the propagation of distal cardiovascular inflammation and trauma. Methods In this study, various concentrations (0, 1.25, 2.5, and 4.5 µg/µL) of P. gingivalis OMVs were microinjected into the common cardinal vein of zebrafish larvae at 48 h post-fertilization (hpf) to assess changes in cardiovascular injury and inflammatory response. Zebrafish larvae from both the PBS and the 2.5 µg/µL injection cohorts were harvested at 30 h post-injection (hpi) for transcriptional analysis. Real-time quantitative PCR (RT-qPCR) was employed to evaluate relative gene expression. Results These findings demonstrated that P. gingivalis OMVs induced pericardial enlargement in zebrafish larvae, caused vascular damage, increased neutrophil counts, and activated inflammatory pathways. Transcriptomic analysis further revealed the involvement of the immune response and the extracellular matrix (ECM)-receptor interaction signaling pathway in this process. Conclusion This study illuminated potential mechanisms through which P. gingivalis OMVs contribute to CVD. It accentuated their involvement in distal cardiovascular inflammation and emphasizes the need for further research to comprehensively grasp the connection between periodontitis and CVD.

Abstract Objective Occlusal splints are always applied on individuals with bruxism to reduce tooth wear and relieve orofacial symptoms such as myofascial pain. The stomatognathic system is mainly composed of tooth, occlusion, masticatory muscles, and temporomandibular joint. The occlusion and masticatory muscles function are regarded as the important parameters for evaluating the stomatognathic system state objectively. However, the effects of occlusal splints on individuals with bruxism is rarely elucidated from accurate neuromuscular analysis and occlusion evaluation. The aim of the present study was to estimate the effects of three different splints (two clinically common full coverage occlusal splint and an modified anterior splint) on subjects with bruxism using K7-J5 neuromuscular analysis system and Dental Prescale II (DP2) to evaluate occlusion. Methods Sixteen subjects claimed to be suffering from nocturnal bruxism,with complete dentition and stable occlusal relationship, were selected for study.The intermaxillary space and the baselines of EMG-activity of the anterior temporalis and masseter were recorded for all the subjects. The participants was treated with three different splints, and outcomes were estimated by comfort index, occlusion and surface electromyography of anterior temporalis and masseter. Results At teeth clenched position, EMG data were significantly lower in the participants with use of modified anterior splint than with hard, soft occlusal splint or without splint (p

ObjectiveThe purpose of this study was to prospectively evaluate the efficacy of a demineralized dentin matrix (DDM) in decreasing the initial inflammatory response of the gingiva and facilitating the repair and regeneration of soft tissue in alveolar ridge preservation.MethodsThis clinical study employed a split-mouth design. Fourteen patients with a total of forty-four sites underwent extraction and alveolar ridge preservation (ARP) procedures. A Bilaterally symmetrical extraction operation were conducted on the premolars of each patient. The experimental group received DDM as a graft material for ARP, while the control group underwent natural healing. Within the first month postoperatively, the pain condition, color, and swelling status of the extraction sites were initially assessed at different time points Subsequently, measurements were taken for buccal gingival margin height, buccal-lingual width, extraction socket contour, and the extraction socket area and healing rate were digitally measured. Additionally, Alcian Blue staining was used for histological evaluation of the content during alveolar socket healing.ResultsBoth groups experienced uneventful healing, with no adverse reactions observed at any of the extraction sites. The differences in VAS pain scores between the two groups postoperatively were not statistically significant. In the early stage of gingival tissue healing (3 days postoperatively), there were statistically significant differences in gingival condition and buccal gingival margin height between the two groups. In the later stage of gingival tissue healing (7, 14, and 30 days postoperatively), there were statistically significant differences in buccal-lingual width, extraction socket healing area, and healing rate between the two groups. Furthermore, the histological results from Alcian Blue staining suggested that the experimental group may play a significant role in promoting gingival tissue healing, possibly by regulating inflammatory responses when compared to the control group.ConclusionThe application of DDM in alveolar ridge preservation has been found to diminish initial gingival inflammation after tooth extraction. Additionally, it has shown the ability to accelerate early gingival soft tissue healing and preserve its anatomical contour.Clinical trial registrationchictr.org.cn, identifier ChiCTR2100050650.

As a two-dimensional (2D) semiconductor material with excellent optoelectronic properties, black phosphorus (BP) has attracted widespread attention. It was found that the energy band structure of BP crystal changes with its thickness if BP is thin. To explore the accurate effects of the BP thicknesses on devices, BP-FETs with different BP thickness (50 nm, 40 nm, 30 nm, 20 nm, and 6 nm) as the channel material were fabricated by mechanical exfoliation technique. The output characteristics and transfer characteristics of the BP-FETs were analyzed in detail. The source–drain current (Ids) of devices is directly related to the BP thickness. The larger the BP thickness, the larger the Ids obtained under the same gate voltage modulation, but the electric field modulation effect decreases. Especially, the correlation between Ids and BP thickness can be described by a semi-empirical formula, which predicts that only when the BP thickness is less than 21.7 nm, the band structure of BP will be significantly affected by the thickness. The mobility of the carrier increases with the increasing of the BP thickness; for BP thickness of 6 nm, 20 nm, 30 nm, 40 nm, and 50 nm, the mobility is about 52.5 cm2/Vs, 187.5 cm2/Vs, 214.4 cm2/Vs, 252.5 cm2/Vs, and 336.4 cm2/Vs. Finally, the 50 nm BP in FET was etched to 30 nm using plasma etching technology to further verify the above experimental results. It also confirmed that plasma etching methods tend to introduce structural damage and impurity elements, which in turn has an impact on the output characteristics of the device.

Amine acid transformation is an important chemical process in biological systems. As a well-developed and acknowledged tool, chiral aldehyde catalysis provides good catalytic activation and stereoselective control abilities in the asymmetric reaction of N-unprotected amino acid esters and amino acid esters analogs, in which the key to success is the design of the catalysts derived from chiral BINOL aldehyde, which is based on the face control of enolate intermediates. In this review, one of the co-catalytic systems that combined with a transition metal to form a multiplex catalytic system and the well-established multiplex stereocenters of chiral aldehyde catalysis have been reviewed. Finally, a novel organocatalysis is prospected.

Superhydrophobic coatings help to reduce the surface contamination of glass and improve its performance. A SiO _2 nanoparticles superhydrophobic surface with tunable adhesion is obtained on a glass substrate after modifying with PDMS. With the water contact angle of 155.1 ± 3°, the superhydrophobic surface also shows excellent self-cleaning property, good durability and thermal stability. This method is facile, cost-effective and easy to operate and will expand the potential applications of glass materials in different fields.