Search

Erosion of solid particles in a pipe elbow containing a 90° angle is investigated by simulation methods. In the process of shale gas exploitation, the impact of solid particles carried by fluid on the inner surface wall of pipes, as well as the turbulent flow, cause the erosion of pipes, which brings about heavy economic losses for the oil and gas industry. In the impact erosion of the inner surface wall of the pipe, the worst erosion occurs at the elbow. In this study, the erosion of a pipe elbow which has been widely used in actual production is analyzed, and the influence of the fluid velocity, the solid particle size, and the wall roughness on the erosion is investigated. Additionally, the simulation results of the erosion with the rebound and freeze boundary conditions are compared, indicating that setting the freeze boundary condition could significantly improve the computational efficiency by 74% with the acceptable accuracy. In order to reduce the impact erosion in the pipe elbow containing a 90° angle, an optimal design is proposed that can reduce the maximum erosion rate by 52.4%. These results complement the research of elbow erosion and provide ideas for the optimization problem of a pipe elbow containing a 90° angle.

Maritime search and rescue (SAR) operations are critical for ensuring safety at sea. Islands have been considered as feasible solutions for the construction of new maritime SAR bases to improve the capacity of SAR operations in remote sea areas. This paper proposes a new framework, based on island spatial information, for determining the optimal locations for maritime SAR bases. The framework comprises four steps. First, candidate islands for the construction of maritime SAR bases are selected. Second, the potential rescue demand is estimated by employing ship location data and marine incident data. In the third step, the response time from candidate islands to any site at sea is calculated, with explicit consideration of the impact of sea conditions on the ship’s speed. Fourth, the final island locations are proposed by solving the maximal covering location problem (MCLP). The proposed framework was applied to the South China Sea. The results showed that there would be a decrease of 1.09 h in terms of the mean access time for the South China Sea if the six selected island bases were constructed, whilst the primary coverage increased from 62.63% to 80.02% when using a 6-hour threshold. This new framework is expected to contribute to improvements in safety at sea and should be applicable to any sea area where the construction of island rescue bases is being considered.