Search

Conventional implant dentistry has been limited to healed edentulous ridges with adequate bone. Predictable success rates resulted in using dental implants in compromised situations such as insertion into old infected sites or near to pathological areas. There is significant data about marginal bone loss and lack of osseointegration around the neck of implants. However, the data about peri apical implant bone loss is really rare. An electronic search was carried in PubMed regarding articles in the time period from 1980 to 2011. Subsequent manual search was performed included all animal and human case series and clinical trials. Reported success rates and treatment options were calculated in a systematic manner. There is conflicted data showing a relatively accepted success of implantation immediately after removal of infection directly or indirectly in contact with the apical portion of the implants. However, some complications may happen that must be managed. The available data about the periapical implant pathologies is relatively inadequate. However, concluded data represents some clinical comments in order to reduce the complexities. [ABSTRACT FROM AUTHOR]

Dengue virus (DENV) remains a significant public health threat in tropical and subtropical regions, with effective antiviral treatments and vaccines still not fully established despite extensive research. A critical aspect of vaccine development for DENV involves selecting proteins from both structural and non-structural regions of the virus to activate humoral and cellular immune responses effectively. In this study, we developed a novel vaccine for dengue virus serotype 2 (DENV2) using a heterologous Prime-Boost strategy that combines an adenoviral vector (Ad) with subunit vaccines. The vaccine design included non-structural protein 1 (NS1), envelope protein domain III (EDIII), and the bc-loop of envelope domain II (EDII) as conserved epitopes. These antigens were fused into a single construct P1 and inserted into the pAdTrack-CMV vector to produce a recombinant adenovirus (rAd5-P1) via homologous recombination in E. coli. The examination of the immune response indicated that strong humoral and cellular immunity was generated in various groups of mice. Additionally, the group receiving a heterologous regimen of recombinant adenovirus and protein showed a superior balance of humoral and cellular immunity in terms of IgG2a/IgG1 and INF-γ /IL-4 ratios. These findings validate the vaccine design's ability to utilize both structural and non-structural proteins to generate strong immune responses on two platforms. The promising results from the heterologous regimen highlight its potential as an effective DENV2 vaccine candidate. This research offers significant insights into developing safe and effective DEN vaccines, contributing to efforts to control DENV infections., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2025 Elsevier B.V. All rights reserved.)

Background: The aim of this review is to compare the clinical outcomes of different soft tissue grafting materials (connective tissue graft (CTG), platelet-rich fibrin (L-PRF), allogenic and xenogenic substitutes) applied in immediate implant placement with each other., Methods: Through an electronic search regarding the study's main question ("In patients with non-restorable teeth, who receive immediate dental implants (P), what is the best adjunctive soft tissue grafting approach among different autogenous, allogenous, and xenogenous grafts (I), to achieve the desired hard and soft tissue structure (O), compared to sites without grafting (C)?") in PubMed, Scopus, and ISI Web of Science, randomized controlled clinical trials (RCTs) using different soft tissue grafts were identified and analyzed using a Bayesian random-effect network meta-analysis framework. The pink esthetic score (PES), marginal interproximal bone level changes (MIBL), buccal bone thickness changes (BBT), keratinized tissue width changes (KTW), soft tissue thickness changes (STT), papilla height changes (PH), midfacial gingival margin level changes (MGML) were defined as desired outcomes of the study; except for the MIBL with 12 - 24 months of follow-up, 6 - 12 months is considered for other outcomes., Results: After duplication removal, 903 studies were identified through the electronic search; from which 21 RCTs were included in the review. Among all comparisons in different outcomes, only CTG demonstrated a significantly higher gain in STT compared to not placing soft tissue graft. However, CTG in MIBL, KTW, STT, PH, and MGML, and uni-layer xenogenic collagen matrix in PES were the superior treatments, according to the treatment ranking based on surface under cumulative ranking (SUCRA)., Conclusions: At the time of immediate implantation, there is no significant difference between different soft tissue grafts regarding the clinical outcomes of implants. However, the utilization of CTG can be suggested in cases with thin soft tissue. The acceptable efficacy of allogenic and xenogenic materials and the non-significant difference between them and CTG indicate supporting evidence for the application of these materials to specific clinical situations simultaneously with immediate implantation., Systematic Review Registration: CRD42024568586., Competing Interests: Declarations. Ethics approval and consent to participate: Not applicable. Consent for publication: Not applicable. Competing interests: The authors declare no competing interests., (© 2025. The Author(s).)

Objectives: Peri-implantitis (PI) is the most common biological issue surrounding dental implants. According to current knowledge, the aforementioned complication is not equally distributed across different populations, and gene polymorphisms might be one contributing factor. The current study aimed to examine the association between gene polymorphisms of matrix metalloproteinase- (MMP-) 1, -2, -3, -7, and -13 with PI in an Iranian demographic., Material and Methods: The study's sample included 50 subjects suffering from PI and 89 healthy controls. From each participant, a venous blood sample of 5 cc was obtained, and DNA was extracted. Gene polymorphisms were investigated using restriction fragment length polymorphism polymerase chain reaction (RFLP-PCR) combined with electrophoresis. Statistical analyses were done using the Pearson chi-square test, odds ratio, and t-test via SPSS version 28., Results: The MMP-3 (-1171 5A/6A) and MMP-7 (-181 A/G) gene polymorphisms were significantly different between the patients with PI and healthy controls (PV < 0.001 and =0.025, respectively). MMP-1 (-1607 1G/2G), MMP-2 (-1306 C/T), and MMP-13 (-77 A/G) gene polymorphisms did not, however, differ in terms of prevalence between the two groups (PV > 0.05). Moreover, the presence of the 6 A allele in the MMP-3 (-1171 5A/6A) genotype resulted in a significant decrease in PI risk (PV < 0.001)., Conclusions: Gene polymorphisms in the genotypes of MMP-3 (-1171 5A/6A) and MMP-7 (-181 A/G) were differential when comparing PI patients and healthy controls of the studied population., (© 2024 The Author(s). Clinical and Experimental Dental Research published by John Wiley & Sons Ltd.)

Statement of Problem: Whether placing implants to replace each missing tooth or using implant-supported fixed partial dentures provides better outcomes is unclear., Purpose: The purpose of this systematic review and meta-analysis was to assess the success and survival rates of implants supporting single-unit and multiunit fixed prostheses by using conventional protocols for placement and loading in short- and long-term follow-ups., Material and Methods: An electronic search was conducted in PubMed, Scopus, and Web of Science for studies published up to March 17, 2022. Comparative studies that reported the success or survival rates of both single-unit and splinted multiunit prostheses were considered for qualitative and quantitative analyses., Results: A total of 68 publications comprising 11 271 implants were included. Compared with the single prostheses, the splinted multiunit group showed no significant differences in implant success rates in the short-term (risk difference=-0.004; 95% confidence interval (CI)=-0.033 to 0.025; P=.780) and long-term (risk difference=0.003; 95% confidence interval (CI)=-0.029 to 0.034; P=.874) follow-ups. Significant statistical differences were also not found in terms of the survival rates of the 2 groups (short-term risk difference=-0.004; 95% CI=-0.031 to 0.023; P=.779, long-term risk difference=-0.002; 95% CI=-0.029 to 0.025; P=.887)., Conclusions: Implants supporting single-unit or splinted multiunit prostheses seem to be a predictable treatment in terms of survival and success over short and long periods. Nonetheless, it seems that cantilever and nonsplinted multiunit prostheses should be used with more caution., (Copyright © 2023 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.)

Objective: CD22, as a surface protein of B cells, is used in the diagnosis and target-specific immunotherapy of B-cell malignancies. SpyTag and SpyCatcher, on the other hand, are two covalently coupled proteins capable of developing a bi- or multi-specific modular protein. The aim of this study was to develop FITC-conjugated SpyCatcher-SpyTagged anti-CD22 Nanobody (FITC-SpyC-SpyT-CD22Nb) to recognize CD22 on the surface of malignant B cells., Materials and Methods: In this experimental study, the SpyTag-CD22Nb construct was subcloned into a pET22 vector and expressed in E. coli BL21 (DE3). After purification using His-tag affinity chromatography, the size of the eluted protein was confirmed on a Western blot. In addition, the SpyCatcher protein, subcloned into pET28, was expressed in E. coli BL21 (DE3), purified by His-tag affinity chromatography and subjected to FITC labeling. FITC-SpyCatcher and SpyTag-CD22Nb were coupled in a 1:1 molar ratio. The specific binding of the produced FITC-SpyC-SpyT-CD22Nb was tested using CD22+ Raji and CD22- K562 cell lines and was evaluated by flow cytometry., Results: SpyTag-CD22Nb and SpyCatcher were successfully expressed in E. coli BL21 (DE3). The 1:1 molar ratio of SpyTag-CD22Nb and FITC-SpyCatcher successfully formed FITC-SpyC-SpyT-CD22Nb at room temperature. The flow cytometry results showed that FITC-SpyC-SpyT-CD22Nb specifically binds to the CD22+ Raji cells, while there is no binding to the CD22- K562 control cells., Conclusion: The novel FITC-SpyC-SpyT-CD22Nb produced in the present study is capable of detecting the surficial expression of CD22. According to our findings, FITC-SpyC-SpyT-CD22Nb is applicable for specific targeting of CD22 in a therapeutic manner, i.e., chimeric antigen receptor (CAR)-T cell therapy and antibody drug conjugates (ADCs).

Objective: This systematic review aims to evaluate existing evidence to investigate the therapeutic efficacy of M2 macrophage-derived exosomes in bone regeneration., Design: A comprehensive search between 2020 and 2024 across PubMed, Web of Science, and Scopus was conducted using a defined search strategy to identify relevant studies regarding the following question: "What is the impact of M2 macrophage-derived exosomes on bone regeneration?". Controlled in vitro and in vivo studies were included in this study. The SYRCLE tool was used to evaluate the risk of bias in the included animal studies., Results: This review included 20 studies published. Seven studies were selected for only in vitro analysis, whereas 13 studies underwent both in vitro and in vivo analyses. The in vivo studies employed animal models, including 163 C57BL6 mice and 73 Sprague-Dawley rats. Exosomes derived from M2 macrophages were discovered to be efficacious in promoting bone regeneration and vascularization in animal models of bone defects. These effects were primarily confirmed through morphological and histological assessments. This remarkable outcome is attributed to the regulation of multiple signaling pathways, as evidenced by the findings of 11 studies investigating the involvement of miRNAs in this intricate process. In addition, in vitro studies observed positive effects on cell proliferation, migration, osteogenesis, and angiogenesis. Heterogeneity in study methods hinders direct comparison of results across studies., Conclusion: M2 macrophage-derived exosomes demonstrate remarkable potential for promoting bone regeneration. Further research optimizing their application and elucidating the underlying mechanisms can pave the way for clinical translation., Competing Interests: Declaration of Competing Interest The authors declare no conflict of interests regarding this study., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

This systematic review and meta-analysis assesses the clinical outcomes of implants inserted during or following transcrestal sinus lifts. The study protocol was prospectively registered on PROSPERO (CRD42024504513). PubMed, Web of Science, Embase, and Scopus databases were searched up to 21 February 2024, and randomised clinical trials utilising transcrestal sinus lifts were included. Qualitative and quantitative syntheses were conducted. A random effects model was used to pool the survival rate of implants placed with transcrestal sinus lifts using hand osteotomes without grafting, along with meta-regression and subgroup analyses. Funnel plots and Egger's linear regression were used to explore possible publication bias. Probabilities of less than 0.05 were considered significant. A total of 1807 records were identified after the initial search. Seventeen studies were included with 10 of them considered for meta-analysis. Studies used hand osteotomes, a combination of piezoelectric and hand osteotomes, drills, and smart lifts for sinus elevation. Only studies that used hand osteotomes reported subsequent vertigo and dizziness in patients. The meta-analysis showed a 100% (95% CI: 99% to 100%) survival rate for both grafted and non-grafted transcrestal sinus lifts using hand osteotomes. Meta-regression showed that follow-up time did not significantly affect the implants' survival. Subgroup analyses showed no significant difference between bone-level and tissue-level implants and one-stage or two-stage implants. On considering the limitations of this study it can be concluded that closed maxillary sinus elevation can be considered a relatively safe technique that is associated with a high survival rate. However, caution should be taken when using hand osteotomes because of a higher rate of sinus lining perforation and reported patient vertigo., (Copyright © 2024 The British Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.)

This study aimed to design a new surgical guide for controlling the mesiodistal distance between implant osteotomies and adjacent teeth as well as the osteotomy depth in partially edentulous patients. The guide kit was designed with design software and milled with a CNC (computer numerical control) router. The guide consisted of 2 components-stoppers and crown guides-for determining the drilling depth and mesiodistal position, respectively. The stoppers were designed in 7.5-, 9.5-, and 11.5-mm lengths, and the crown guides were fabricated with outer diameters of 5.0, 6.0, 7.0, and 8.0 mm. The accuracy of the guide was assessed by preparing a total of 20 implant osteotomies in 4 partially edentulous models and comparing the dimensions of the actual osteotomies to the values that were predicted to occur with the use of the surgical guides. Osteotomies were prepared using the 7.5-mm stopper with either the 7.0- or 8.0-mm crown guide. Cone beam computed tomography (CBCT) was used to obtain images for analysis of osteotomy-tooth mesiodistal distances, which were predicted to be 3.0 or 5.5 mm, depending on position; interosteotomy mesiodistal distances, which were predicted to be 3.0 mm; and osteotomy depth, which was predicted to be 11.5 mm. A 1-sample t test was used to determine if there were significant differences between the predicted values and the measurements of the guided osteotomies on the CBCT images of the mandibular models, and an independent t test was conducted to compare the results of 3.0- and 5.5-mm osteotomy-tooth distances (α = 0.05). Differences between the predicted and actual values of the interosteotomy mesiodistal distance (P = 0.516) and osteotomy depth (P = 0.847) were not statistically significant. The actual osteotomy-tooth mesiodistal distances were significantly different from the predicted values of 3.0 (P = 0.000) and 5.5 mm (P = 0.001), with higher mean differences of 0.46 and 0.60 mm, respectively. The designed guide had a high accuracy in achieving optimal linear interosteotomy mesiodistal distances and osteotomy depths, and the obtained mean values were clinically acceptable., Competing Interests: No conflicts of interest reported.

Methods: Patients examined during postloading maintenance visits were included in this study. The presence of peri-implant mucositis, peri-implantitis and several patient- and implant-related independent variables was recorded. Statistical analysis was performed using the logistic regression analysis. The odds ratios (OR) of the potential association between each variable and the occurrence of peri-implant diseases were evaluated., Results: Among the 114 participants with 403 implants, peri-implantitis was found in at least one implant of nine individuals (7.89%), and a total of 13 implants were affected by peri-implantitis (3.22%). The univariate regression analysis revealed a statistically significant association between arch (OR = 4.81; 95% CI = 1.27-31.36) and soft tissue thickness (OR = 4.07; 95% CI = 1.33-13.73) with the occurrence of peri-implantitis. The multivariate analysis confirmed the significant impact of soft tissue thickness (OR = 3.60; 95% CI = 1.16-12.24)., Conclusion: The occurrence of peri-implant diseases can be influenced by various factors. However, in order to accurately identify risk indicators, it is necessary to conduct long-term prospective studies., Competing Interests: The authors declare that they have no conflicts of interest., (Copyright © 2024 Mahdi Kadkhodazadeh et al.)

The present study aims to evaluate the trends of oral implant-related research in design and topics between the range of 2016 to the end of 2022. The electronic search was conducted in MEDLINE via Pubmed. Papers published in Clinical Oral Implant Research, Clinical Implant Dentistry and Related Research, and International Journal of Oral Implantology as well as previously European Journal of Oral Implantology, International Journal of Oral and Maxillofacial Implants, and Journal of Oral Implantology between January 1, 2016, and December 30, 2022, were retrieved. Articles were classified according to their study design and major subjects. The Joinpoint regression model was used to determine changes in the trends of study designs and topics. Statistical significance was defined as a p-value <.05. A total of 3382 articles were analyzed in this study. In the specified period, in vivo, prospective cohort, retrospective case control, randomized clinical studies in the design and prosthetic complications, peri-implant hard tissue studies in the topic experienced a significant decreasing pattern in the number of published articles as well as the total number of articles. Case reports and series, retrospective cohort, nonrandomized clinical studies in the design and outcomes of implant-related treatment plans, immediate implant placement, and peri-implantitis in the topic experienced a significant decreasing pattern followed by a significant increasing pattern with a turning point between 2017 and 2020. Considering the limitations of this scientific topical trend analysis, it can be concluded that the recent pandemic affected the research path in oral implantology in many ways.

Background: The purpose of this study was to review the literature on the efficacy of different surgical regenerative methods for peri-implantitis treatment., Methods: A preliminary search was conducted in seven electronic databases. The studies included in the analysis implemented surgical regenerative treatment in at least one study group. Baseline and follow-up values for bleeding on probing (BoP), pocket depth (PD), plaque index (PI), bone level (BL), and bone gain (BG) were extracted. The standardized mean difference (SMD) was calculated using Cohen's d or Hedges' g, and a random-effects-restricted maximum likelihood (REML) method was applied for the meta-analysis., Results: Fifteen studies were included in the qualitative synthesis. The meta-analysis was performed on six studies comparing regenerative techniques that involved bone grafts with those that did not. The overall effect size for using bone grafts at the one-year follow-up was 0.04 (95% CI: -0.26‒0.35; P =0.78) for BoP, -0.08 (95% CI: -0.42‒0.27; P =0.66) for PD, 0.37 (95% CI: 0.08‒0.65; P =0.01) for PI, -0.44 (95% CI: -0.84 to -0.03; P =0.03) for BL, and 0.16 (95% CI: -0.68‒1.01; P =0.70) for BG., Conclusion: Various materials have been employed for peri-implant defect filling and coverage. A bone substitute did not significantly improve BoP, PD, and BG values, while PI and BL were significantly ameliorated at one-year follow-up. However, recommending a single unified protocol as the most effective for surgical regenerative treatment of peri-implantitis was not feasible., Competing Interests: The authors declare that they have no competing interests., (© 2024 The Author(s).)

Background: The use of bone graft materials has significantly increased. Given the inherent variations in structure and functionality between different grafting materials, this evaluated and compared the physical attributes of antler and bovine femur bone substitutes., Methods: In the present in vitro investigation, the surface morphological architecture of the two bone substitutes with different origins was assessed through scanning electron microscopy. Furthermore, the Brunauer-Emmett-Teller (BET) technique was employed to measure the porosity, specific surface area (SSA), and pore morphology., Results: Scanning electron microscopy observations indicated that the surface of the bovine particles appeared smoother, while the antler particles exhibited a rougher surface texture. The BET analysis revealed that both samples exhibited identical pore morphology. The SSA was 15.974 m 2 /g in the antler particles compared with 18.404 m 2 /g in the bovine sample. The total porosity volume in the antler and bovine femur bone substitutes were 0.2172 cm 3 /g and 0.2918 cm 3 /g, respectively. Additionally, the antler particles had a porosity percentage of 40%, whereas the bovine femur bone substitute showed a porosity percentage of 43.5%., Conclusion: Based on the results of this study, it seems that the two samples of bone grafting materials have comparable physical structures., Competing Interests: The authors do not have any financial interest in the companies whose materials were included in this study., (© 2024 The Author(s).)

In addition to the proper selection of techniques, appropriate treatment sequencing and prioritization are prerequisites for successful periodontal and implant procedures. The aim of this study was to provide evidence-based time frames for various procedures pertaining to periodontal and implant treatment. A literature review was conducted to collect data on tissue healing; in areas in which data were lacking, the viewpoints of experienced clinicians were solicited to establish a consensus. This review reports recommended time frames for the healing processes associated with surgical crown-lengthening procedures (both functional and esthetic), fresh socket management, alveolar ridge management, soft tissue management, sinus floor augmentation, implant loading, and peri-implant defect management., Competing Interests: No conflicts of interest reported.

Background: Transgingival probing is conventionally used for gingival thickness (GT) measurement. However, invasiveness is a major drawback of transgingival probing. Thus, researchers have been in search of alternative methods for measurement of GT. This study compared the clinical efficacy of intraoral ultrasonography and transgingival probing for measurement of GT in different biotypes., Materials and Methods: This clinical trial was conducted on 34 patients requiring crown lengthening surgery. GT was measured at 40 points with 2- and 4-mm distances from the free gingival margin (FGM) of anterior and premolar teeth of both jaws in each patient by an intraoral ultrasound probe. For measurement of GT by the transgingival probing method, infiltration anesthesia was induced, and a #25 finger spreader (25 mm) was vertically inserted into the soft tissue until contacting bone. The inserted length was measured by a digital caliper with 0.01 mm accuracy. All measurements were made by an operator with high reliability under the supervision of a radiologist. Data were analyzed by t-test, Power and Effect Size formula, and intraclass correlation coefficient (ICC)., Results: The two methods were significantly different in measurement of GT in both thick and thin biotypes at 2- and 4-mm distances (P < 0.001). The two methods had a significant difference in both the mandible (P < 0.001) and maxilla (P < 0.001) and in both the anterior (P < 0.003) and premolar (P < 0.003) regions. Although the difference was statistically significant in t-tests, the power and effect formula proved it to be clinically insignificant. Also, the ICC of the two methods revealed excellent agreement., Conclusion: The results showed optimal agreement of ultrasound and transgingival probing for measurement of GT., Trial Registration: The study was approved by the ethics committee of Shahid Beheshti University of Medical Sciences on 2021-12-28 (IR.SBMU.DRC.REC.1400.138) and registered in the Iranian Registry of Clinical Trials on 2022-03-14 (IRCT20211229053566N1)., (© 2024. The Author(s).)

Objective: The purpose of this study was to assess the feasibility of phenotype modification in orthodontic patients using combined bone and soft tissue grafting substitutes., Clinical Consideration: The surgical procedure was conducted on 18 patients (3 males, 15 females). Periodontal phenotype modification was conducted using demineralized freeze-dried bone allograft and a xenogeneic collagen matrix. The following parameters were recorded for each tooth at baseline and 12-month follow-up: O'Leary plaque index (PI), probing depth (PD), bleeding on probing (BOP), gingival thickness (GT), keratinized tissue width (KTW), gingival recession (GR), and vestibular depth (VD). The results showed a statistically significant increase in GT (2.02 ± 0.39 mm), KTW (1.11 ± 0.82 mm), and VD (0.18 ± 1.16 mm) (p < 0.05). GR was also significantly decreased (1.02 ± 0.99 mm) (p < 0.05)., Conclusion: Within the limitation of this study, the proposed approach enhanced the periodontal condition in orthodontic patients. However, further studies with a larger sample size are needed to ensure long-term stability., Clinical Significance: Hard and soft tissue conditions have paramount importance for long-term periodontal stability. Phenotype modification in orthodontic patients can diminish the probability of adverse consequences and result in optimal esthetic outcomes. The proposed technique using combined bone and soft tissue substitutes indicated promising results and could be recommended in orthodontic patients with thin periodontal phenotypes., (© 2023 Wiley Periodicals LLC.)

Background: Xenograft bone substitutes can be obtained from different animals and processed using various methods. The present in vivo study evaluated bone regeneration after using three types of xenografts with different sources in critical-sized bone defects in rabbit calvaria., Methods: Four 8-mm defects were created in calvaria of 14 New Zealand and white male rabbits. Three out of four defects were filled with xenografts of bovine, camel, and ostrich sources. The fourth defect was left unfilled as the control group. Seven rabbits were sacrificed after eight weeks and seven others after 12 weeks. Micro-CT imaging and histologic evaluation were further performed on dissected calvarias., Results: After 8 and 12 weeks, the highest and lowest percentages of new bone formation were observed in the camel (27.71% and 41.92%) and control (11.33% and 15.96%) groups, respectively. In the case of residual material, the ostrich group had the most value after eight weeks (53%), while after 12 weeks, it was highest in the camel group (37%). Micro-CT findings were consistent with histologic results., Conclusion: Although all three xenografts can be good choices for treating bone defects, camel-sourced xenograft seemed to be better than the other two groups. The origin and processing procedures of xenografts affected their final characteristics, which should be considered for clinical use., Competing Interests: The authors declare no competing interests., (© 2024 The Author(s).)

Aim: The potency of Adenovector expressing Mda7-tLyp1 (Ad-Mda7-tLyp1) for death induction was evaluated on the breast (MCF7), liver (HepG2), and gastric (MKN45) cancer cell lines., Background: Mda-7 could be a possible complementary to traditional cancer therapy, and tethering to tumor-homing peptides (THPs) might improve its therapeutic efficacy., Methods: After the preparation of recombinant Ad-Mda7-tLyp1 and Ad-Mda7, the expression of recombinant proteins was analyzed by ELISA. Adenovectors were transduced (MOI=2-5) into Hep-G2, MCF7, MKN45, and normal skin fibroblast, then tumor-killing effect was measured by cytopathic effect (CPE) monitoring, MTT viability test, BAX gene expression analysis, and Caspase3/7 assay., Results: ELISA assay revealed a sustained level of recombinant protein secretion following Adenovector transduction. In CPE microscopy, all cancer cell lines showed a significant reduction (≥50%) in their normal phenotype after receiving Ad-Mda7-tLyp1 and Ad-Mda7. The viability was significantly lower compared to the control, indicating an anti-proliferating effect. In parallel, the viability test showed that Ad-Mda7 and Ad-Mda7-tLyp1 have a significant killing effect (≥50%) on MCF-7, Hep-G2, and MKN45 compared to normal fibroblast (P≤0.05). BAX gene expression analysis showed that both Ad-Mda7-tLyp1 and Ad-Mda7 vectors induced >2-fold increase of apoptosis (P<0.05), particularly in MCF7. Similarly, caspase3/7 activity showed a significant increase (P<0.05) following Ad-Mda7, and Ad-Mda7-tLyp1 transduction into cancer cell lines, but not in normal fibroblasts., Conclusion: The newly constructed Ad-Mda-tlyp1 showed a suitable tumor cell killing activity and enough specificity on studied cell lines., Competing Interests: The authors declare no conflict of interest., (© 2024, Gastroenterology and Hepatology From Bed to Bench (GHFBB).)

This study aimed to compare the volume and quality of the newly formed bone following application of two types of xenografts and one synthetic material in bone defects in rabbit calvaria from histological and micro-CT aspects. Four 8-mm defects were created in 12 rabbit calvaria. Three defects were filled with bone substitutes and one was left unfilled as the control group. The newly formed bone was evaluated histologically and also by micro-CT at 8 and 12 weeks after the intervention. The percentage of osteogenesis was comparable in histomor-phometric assessment and micro-CT. Histological analysis showed that the percentage of the newly formed bone was 10.92 ± 5.17%, 14.70 ± 11.02%, 11.47 ± 7.04%, and 9.45 ± 5.18% in groups bovine 1, bovine 2, synthetic, and negative control, respectively after 8 weeks. These values were 33.70 ± 11.48%, 26.30 ± 18.05%, 22.92 ± 6.30%, and 14.82 ± 8.59%, respectively at 12 weeks. The difference in the percentage of the new bone formation at 8 and 12 weeks was not significant in any group (P > 0.05) except for bovine 1 group (P < 0.05). Micro-CT confirmed new bone formation in all groups but according to the micro-CT results, the difference between the control and other groups was significant in this respect (P < 0.05). All bone substitutes enhanced new bone formation compared with the control group. Micro-CT assessment yielded more accurate and different results compared with histological assessment.

Objectives: The current study aimed to investigate the association of matrix metalloproteinase- (MMP-) 1, -2, -3, -7, and -13 gene polymorphisms with chronic periodontitis (CP) in an Iranian population., Materials and Methods: In this case-control study, 87 subjects with CP and 89 periodontally healthy subjects were allocated to case and control groups, respectively. Subjects' venous blood samples (5 cc) were collected, and DNA extraction was performed. A spectrophotometer was utilized to assess the concentration of extracted DNAs. The desired gene polymorphisms were examined using restriction fragment length polymorphism polymerase chain reaction (RFLP-PCR) followed by electrophoresis. Statistical analyses were done using the Pearson Chi-Square test, odds ratio, and t-Test using SPSS Version 28., Results: The MMP-1 (-1607 1G/2G) rs1799750, MMP-3 (-1171 5A/6A) rs3025058, and MMP-7 (-181 A/G) rs11568818 gene polymorphisms significantly differed between case and control groups (PV = 0.019, 0.007, and 0.028, respectively). In contrast, the gene polymorphisms of MMP-2 (-1306 C/T) rs243865 and MMP-13 (-77 A/G) rs2252070 did not make a significant difference. Regarding allele frequencies, the presence of the 2G allele in the MMP-1 (-1607) rs1799750 genotype increased the CP susceptibility significantly, while subjects with the 6A allele in their MMP-3 (-1171) rs3025058 genotype showed significantly lower susceptibility to CP (PV = 0.008 and < 0.001, respectively)., Conclusion: In the studied population, gene polymorphisms in the DNA sequences of MMP-1 (-1607 1G/2G) rs1799750, MMP-3 (-1171 5A/6A) rs3025058, and MMP-7 (-181 A/G) rs11568818 may have impacts on CP incidence., Clinical Relevance: Clinicians should be cautious about the association between MMP-1, MMP-3, and MMP-7 gene polymorphisms and the incidence of chronic periodontitis during periodontal treatment planning., (© 2023. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Statement of Problem: Immediate implant placement provides a popular therapeutic option. However, compromised sockets may jeopardize the treatment outcome., Purpose: The purpose of this systematic review and meta-analysis was to investigate the treatment outcome in terms of the implant survival rate and success parameters of immediate implant placement in compromised extraction sockets., Material and Methods: An electronic search was conducted in PubMed, Embase, Cochrane Library, and ISI Web of Science up to January 2021. Studies evaluating implant survival rate and main success parameters were included for a qualitative and quantitative analysis (risk ratio and mean difference)., Results: In total, 43 studies with analysis of 4825 sockets were included. Compared with the noncompromised sockets, the compromised group showed no significant differences in implant survival rates (risk ratio=0.992; 95% confidence interval (CI)=0.979 to 1.005; P=.246). No significant statistical differences were found in marginal bone level at ≤12 months (mean difference [MD]=0.033; 95% CI=-0.012 to 0.078; P=.154) or esthetic parameters., Conclusions: Immediate implant placement in compromised sites does not appear to decrease the survival and success rates. However, randomized clinical trials with large sample sizes should be conducted to draw a definite conclusion about the efficacy and safety of this treatment protocol in compromised sockets., (Copyright © 2021 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.)

Considering the widespread use of dental implants, a precise definition for peri-implant tissue health and an appropriate classification for peri-implant diseases are imperative for researchers and dental clinicians. However, absence of a unanimous definition and an efficient classification system has created controversies in the published reports regarding the epidemiology and prevalence of peri-implant diseases. Moreover, lack of a standard system for differentiation of different grades of peri-implantitis further complicates the interpretation of reports regarding the diagnosis prevalence, treatment, and outcome of such conditions, and highlights the need for a classification system based on the severity of disease. Almost all of the currently available classification systems focus on the assessment of health or disease status of the tissues around loaded implants. The purpose of the present study is to propose a classification/scoring system for peri-implant tissue health before and after prosthetic loading. This grading system can aid the researchers and dental clinicians in assessment of peri-implant tissue condition both before and after prosthetic loading of dental implants.

For adenoviruses (Ads) to be optimally effective in cancer theranostics, they need to be retargeted toward target cells and lose their natural tropism. Typically, this is accomplished by either engineering fiber proteins and/or employing bispecific adapters, capable of bonding Ad fibers and tumor antigen receptors. This study aimed to present a simple and versatile method for generating Ad-based bionanoparticles specific to target cells, using the SpyTag-SpyCatcher system. The SpyTag peptide was inserted into the HI loop of fiber-knob protein, which could act as a covalent anchoring site for a targeting moiety fused to a truncated SpyCatcher (SpyCatcherΔ) pair. After confirming the presence and functionality of SpyTag on the Ad type-5 (Ad5) fiber knob, an adapter molecule, comprising of SpyCatcherΔ fused to an anti-vascular endothelial growth factor receptor 2 (VEGFR2) nanobody, was recombinantly expressed in Escherichia coli and purified before conjugation to fiber-modified Ad5 (fmAd5). After evaluating fmAd5 detargeting from its primary coxsackie and adenovirus receptor (CAR), the nanobody-decorated fmAd5 could be efficiently retargeted to VEGFR2-expressing 293/KDR and human umbilical vein endothelial (HUVEC) cell lines. In conclusion, a plug-and-play platform was described in this study for detargeting and retargeting Ad5 through the SpyTag-SpyCatcher system, which could be potentially applied to generate tailored bionanoparticles for a broad range of specific targets; therefore, it can be introduced as a promising approach in cancer nanotheranostics., Competing Interests: The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2022 Kadkhodazadeh, Mohajel, Behdani, Baesi, Khodaei, Azadmanesh and Arashkia.)

Introduction: This study aimed to assess the quantity and quality of available bone to provide the autologous bone graft from mandibular ramus., Material and Methods: CBCT scans were collected and mandibular ramus was evaluated by measuring a variety of parameters including volume, bone height, cortical, and cancellous bone thickness. Data analysis was performed using descriptive statistics and inferential statistics. We used the Kolmogorov-Smirnov test for the evaluation of data normality. We then applied Pearson correlation and independent t -test for normal variables, and Spearman and Mann-Whitney correlation tests for abnormal variables. Statistical analysis was performed using SPSS version 19 and P value < 0.05 was considered significant., Results: A total of 52 women and 32 men (aged 21 to 70) were included in this study. The mean bone volume was 2.7 ± 0.70 cm 3 [95%confidence interval (CI) 1.3-4.5]. The mean bone density in the middle section was 1016.36 ± 231.58 Gy value (95% CI 475.6-1520.9). Kolmogorov-Smirnov test revealed that the variables such as apical cortical/cancellous ratio ( P  = 0.005), middle-cancellous bone thickness ( P = 0.016), and middle cortical/cancellous ratio ( P  = 0.005) were abnormal and the rest were normal. Bone density, as well as the amount of cortical bone in the middle and apical regions, had a significant reverse correlation with age ( P  < 0.001)., Conclusion: The volume, density, and cortical/cancellous ratio are independent of sex. The reverse relationship between age and bone density, as well as the amount of cortical bone in several parts, indicates a decrease in bone quality with aging., Competing Interests: Conflict of interestThe authors declare that they have no conflict of interest., (© The Association of Oral and Maxillofacial Surgeons of India 2021.)

Objective: This study sought to compare the thickness of hard and soft tissues between edentulous and contralateral tooth sites., Materials and Methods: This split-mouth study evaluated 153 partially edentulous patients. The measurements were made on cone-beam computed tomography (CBCT) scans. The soft tissue thickness was measured at the cementoenamel junctional (CEJ) level, and at 2, 4, and 6 mm apical to the CEJ in the facial and palatal aspects. The bone thickness of the opposite quadrant was also recorded at 2, 4, and 6 mm apical to the CEJ. The Mann-Whitney U test and the Spearman's rank correlation coefficient were applied for further statistical analyses., Results: At the edentulous sites, significant soft tissue loss was noted at the CEJ level ( p  < 0.0001) and a considerable gain was noted at 2, 4, and 6 mm apical to the CEJ ( p  = 0.004, p  < 0.0001, p  ≤ 0.0001, respectively). A significant hard tissue loss was noted at 2 mm apical to the CEJ but a significant hard tissue gain was observed at the edentulous sites ( p  < 0.0001). The soft tissue gain at 6 mm apical to the CEJ was significantly associated with an increase in buccolingual diameter ( p  = 0.004) while the hard tissue loss at 2 mm apical to the CEJ was significantly correlated with a reduction in buccolingual diameter ( p  = 0.020)., Conclusion: Different amounts of tissue thickness alterations occurred in different levels of socket., Competing Interests: Conflict of interestThe authors declare that they have no conflict of interest to this study., (© The Association of Oral and Maxillofacial Surgeons of India 2021.)

Many of the criteria commonly considered in treatment planning for severely damaged teeth are well known to clinicians. However, a systematic approach to decision-making is lacking. The purpose of this article is to introduce a quantitative systematic risk assessment scoring system (RASS) to determine the long-term prognosis for severely damaged teeth based on several important factors. Before any treatment decision is made, the dentist should take into account the role of systemic parameters such as the medical condition of the patient, smoking status, psychological factors, patient expectations with regard to the duration and overall cost of treatment, and periodontal health. In the assessment of local factors, emphasis should be placed on 5 parameters: crown to root ratio, root condition, risk of furcation involvement, complexity of the final restoration, and esthetic results. In the proposed RASS, each of these parameters is ranked using 4 color-coded levels of risk: optimal (green), favorable (blue), unfavorable (yellow), or hopeless (red). The presence of even 1 parameter in the red zone is sufficient to consider tooth extraction. If no parameter is in the red zone, the final decision should be made after the possible effects of all of the clinical conditions are weighed and the overall risk of treatment failure is determined. Clinical decision-making with regard to the preservation or extraction of severely damaged teeth is a challenging, multifactorial process. The RASS introduced in this article focuses on 5 main factors to simplify and organize the decision-making process; however, many other parameters may affect the final treatment decision. Moreover, no decision-making system can be definitively applied to all clinical scenarios, and the entire process depends on the knowledge, experience, and expertise of the clinician., Competing Interests: The authors report no conflicts of interest pertaining to any of the topics discussed in this article.

Despite the fact that the new drugs and targeted therapies have been approved for cancer therapy during the past 30 years, the majority of cancer types are still remain challenging to be treated. Due to the tumor heterogeneity, immune system evasion and the complex interaction between the tumor microenvironment and immune cells, the great majority of malignancies need multimodal therapy. Unfortunately, tumors frequently develop treatment resistance, so it is important to have a variety of therapeutic choices available for the treatment of neoplastic diseases. Immunotherapy has lately shown clinical responses in malignancies with unfavorable outcomes. Oncolytic virus (OV) immunotherapy is a cancer treatment strategy that employs naturally occurring or genetically-modified viruses that multiply preferentially within cancer cells. OVs have the ability to not only induce oncolysis but also activate cells of the immune system, which in turn activates innate and adaptive anticancer responses. Despite the fact that OVs were translated into clinical trials, with T-VECs receiving FDA approval for melanoma, their use in fighting cancer faced some challenges, including off-target side effects, immune system clearance, non-specific uptake, and intratumoral spread of OVs in solid tumors. Although various strategies have been used to overcome the challenges, these strategies have not provided promising outcomes in monotherapy with OVs. In this situation, it is increasingly common to use rational combinations of immunotherapies to improve patient benefit. With the development of other aspects of cancer immunotherapy strategies, combinational therapy has been proposed to improve the anti-tumor activities of OVs. In this regard, OVs were combined with other biotherapeutic platforms, including various forms of antibodies, nanobodies, chimeric antigen receptor (CAR) T cells, and dendritic cells, to reduce the side effects of OVs and enhance their efficacy. This article reviews the promising outcomes of OVs in cancer therapy, the challenges OVs face and solutions, and their combination with other biotherapeutic agents., Competing Interests: Author MBS was employed by HUM Immune Biotech. The remaining authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest., (Copyright © 2022 Jafari, Kadkhodazadeh, Shapourabadi, Goradel, Shokrgozar, Arashkia, Abdoli and Sharifzadeh.)

Decontamination of implant surfaces is important to the treatment of peri-implantitis. Er:YAG laser and air-powder abrasion system are regarded as the most effective means of decontamination of implant surfaces. The aim of this in vitro study was to compare the activity of human dental pulp stem cells (hDPSCs) cultured on decontaminated sandblasted titanium discs using Er:YAG laser irradiation and air-powder abrasion. Forty-five titanium discs were contaminated with Escherichia coli (E. coli) bacteria and fifteen titanium discs served as sterile control groups. Thirty contaminated titanium discs were decontaminated with Er:YAG laser or air-powder abrasion system and fifteen contaminated discs were used as contaminated control group. Afterwards, hDPSCs were seeded on all sixty experimental titanium discs. The effects of two decontamination tools on hDPSCs viability were evaluated by MTT assay. Alkaline phosphatase (ALP) activity assay, quantitative real-time PCR analysis and alizarin red staining method were performed to assess hDPSCs osteogenic differentiation. Scanning microscope electron (SEM) was also used to evaluate the effects of two different decontaminated methods on cellular morphology. Our study showed that decontamination using Er:YAG laser caused maximum cell viability. However, the ALP activity was not different in laser and air-abrasion groups. The significant expression of an osteoblastic marker and stronger Alizarin red staining were observed in laser irradiation groups. In addition, SEM observation indicated that grown cells were more stretched and more filopodia in Er:YAG-treated discs. In the present study, Er:YAG laser and air-powder abrasion improved the activity of the cells cultured on the decontaminated titanium discs. However, in comparison with air-powder abrasion, Er:YAG laser was more effective., (© 2022. The Author(s), under exclusive licence to Springer-Verlag London Ltd., part of Springer Nature.)

Aims: This study aimed to compare the biological reactions of dental pulp stem cells (DPSCs) cultured on new xenograft bone substitutes derived from camel and bovine bones., Materials and Methods: DPSCs were cultured and placed on different xenograft materials including Bone Plus (bovine), Camel Bone, and demineralized bovine bone matrix. The viability and proliferation of cells were evaluated by the methyl thiazolyl tetrazolium assay after 24, 48, and 72 h. The alkaline phosphatase (ALP) test and Alizarin red staining were performed at 7 and 21 days to assess the osteoblastic differentiation of cells. Osteocalcin (OCN) gene expression was evaluated qualitatively at 3-, 7- and 14-days using polymerase chain reaction (PCR). Semi-quantitative PCR was also performed using ImageJ software. Data were analyzed by ANOVA and Tukey's honestly significant difference test., Results: The cell proliferation rate was significantly different among the three xenograft bone substitutes at 24-, 48- and 72 h ( P < 0.05). The ALP activity of DPSCs in all three xenograft bone substitute groups was greater than that in the control group ( P < 0.05). Alizarin red staining showed no significant difference in the formation of calcified nodules among the groups. Qualitative and semi-quantitative PCR displayed that the expression of OCN gene in the Camel Bone and Bone Plus groups was higher than that in the demineralized bovine bone matrix group., Conclusions: The Camel Bone xenograft caused a high proliferation rate and optimal osteogenic differentiation of DPSCs qualitatively and semi-quantitatively in vitro . Further studies are required on this xenograft bone substitute., Competing Interests: There are no conflicts of interest., (Copyright: © 2022 Indian Society of Periodontology.)

Objective: The aim of this study was to evaluate the clinical and radiographic outcomes of the "vertically expander screw" (VES) technique as a novel approach for maxillary sinus floor elevation and simultaneous implant placement., Materials and Methods: Forty-four patients (26 females, 18 males) received 71 implants with simultaneous transalveolar sinus floor elevation via the VES technique. The threaded bone expanders were used to elevate the sinus floor as well as bone expansion. The patients were followed-up on a regular basis, and final clinical and radiographic examinations were performed at least 24 months following functional loading. Statistical analysis was conducted using the Chi-square test, the correlation coefficient, and the independent t test ( p  < 0.05, 95% confidence interval)., Results: All implants showed successful osseointegration. The mean marginal bone loss (MBL; 0.38 ± 0.75 mm) at the site of premolars was not significantly different from the value at the site of molars (0.17 ± 0.50 mm). The mean intrasinus bone gain (IBG) was not significantly different (3.47 ± 1.22 mm and 4.11 ± 1.67 mm, respectively; p  = 0.92). Evaluation of implant success index (ISI) score revealed no difference between the premolars and molars ( p  = 0.12)., Conclusion: Despite the limitations of the present study, it seems that the VES technique and simultaneous implant placement in carefully selected cases may result in promising outcomes., Clinical Relevance: Insufficient alveolar bone height and poor bone quality often complicate implant placement in the edentulous posterior maxilla. The VES technique and simultaneous implant placement can bring about favorable clinical and radiographic outcomes and high survival rate in carefully selected cases., Competing Interests: Conflict of interestThe authors declare that they have no conflict of interest., (© The Association of Oral and Maxillofacial Surgeons of India 2020.)

Background: The maxillary palatine process (MPP) is an excellent source of autogenous bone transplants for anterior maxillary reconstruction. This research aimed to determine the quantity and quality of accessible MPP as a donor location., Methods: Cone-beam computed tomography (CBCT) scans of patients referred to the School of Dentistry were evaluated by a certified examiner. The harvestable MPP was defined as the space between the distal surfaces of maxillary first premolars. OnDemand 3D Imaging software was used to determine bone properties. SPSS software was used to investigate the following variables: Bone characteristics are correlated with age and gender, accessible volume, and palatal width and height. P <0.05 was defined as the level of statistical significance., Results: This study was performed on CBCT scans of 81 subjects (41 females and 40 males). MPP volume and palatal heights were 1.33±0.53 cm3 and 20.86±5.51 mm, respectively. Maximum bone density was observed around lateral incisors. Palatal width was 33.81±2.42 mm between canines and 41.81±2.66 mm between premolars. The MPP volume was significantly greater in males ( P <0.001). Additionally, there was a positive correlation between the volume and palatal width ( P <0.05)., Conclusion: Within the constraints of this research, there is a limited supply of MMP accessible for use as a graft source, and it is best suited for treating localized bone lesions. The favorable link between palatal breadth and harvestable volume aids the surgeon in estimating the quantity of bone accessible during the first evaluation., Competing Interests: The authors declare that they have no known competing and financial interests or personal relationships that could have influenced the work reported in this paper., (© 2022 The Author(s).)

Purpose: The aim of this study was to evaluate and compare the effect of changing five macrostructural design parameters of dental implants on the peak strains experienced by the interfacial bone., Materials and Methods: Five geometric variables, including three body-related (implant length, diameter, and taper) and two thread-related (thread depth and thread angle) parameters, were defined. The alveolar bone was modeled as a block with anisotropic and linearly elastic properties with 20-mm height and 12-mm buccolingual and mesiodistal dimensions. Oblique occlusal loads (100-N vertical and 20-N horizontal) were applied to the abutment surface. A total of 162 models with different designs were defined by implementation of a full-factorial design. The peak values of the compressive and tensile principal strains in the cortical and cancellous bones were calculated by finite element analysis (FEA)., Results: Implant diameter and length had maximum and minimum effects on the peak compressive and tensile strains at the cortical interface, respectively. Implant diameter and thread depth had maximum and minimum effects on the maximum compressive strain at the cancellous interface, while thread angle and length had maximum and minimum significant effects on the maximum tensile strain at the cancellous interface., Conclusion: The interaction of thread parameters and taper has the greatest effect on the peak compressive and tensile strains at the cancellous interface and also on the peak tensile strain at the cortical interface, while body-related parameters are more effective on the peak compressive strain at the cortical interface.

This study retrospectively evaluated the effect of soft tissue condition on peri-implant health. Clinical variables (Plaque Index, keratinized tissue width, gingival biotype, and vestibular depth) were recorded. Probing depth, soft tissue recession, bleeding on probing, and radiographic marginal bone loss were assessed in relation to independent variables. Statistical analysis was performed using Mann-Whitney U test or Kruskal-Wallis rank test and a logistic regression model at the implant level. A total of 139 implants in 43 patients were assessed. Bleeding on probing was recorded at 54.7% sites, which was significantly related to the biofilm accumulation. Gender, history of periodontal disease, patient adherence to recall visits, and the presence of plaque were associated with higher peri-implant probing-depth values. The maximum soft tissue recession was recorded at sites with a thin biotype and shallow vestibular depth (P = .0). The logistic regression analysis revealed that plaque (P = .002) and vestibular depth (P = .043) were significantly associated with peri-implantitis. Within the study limitations, patients with high plaque accumulation and shallow vestibular depth are more prone to peri-implant disease.

Objective: The aim of this study was to determine the average and maximum height of the papilla around maxillary anterior implants in respect of neighboring structures and location of implants., Materials and Methods: 92 dental implants from 63 patients were investigated in this study. Those implants were placed in the anterior maxillary region and had been loaded for a minimum of one year. After receiving written consent, clinical data including the height of interproximal papillae adjacent to the tooth/implant/pontic were obtained through clinical observation. The independent t -test or ANOVA, the regression modeling, and generalized estimating equation (GEE) models were used for statistical analysis ( p < 0.05)., Results: Papilla height was calculated as 2.8 mm (1-5.5 mm) for implant-tooth sites, 2.6 mm (1-4 mm) in implants beside pontics, and 2.5 mm (1-3.5 mm) for implants adjacent to implants. Despite the lack of a significant difference in the mean papilla height in the studied groups, the maximum values of papilla heights were significantly different., Conclusions: In this study, no significant differences were found in papilla height mean values in relation to neighboring structures or location of implants in the anterior maxilla. However, the maximum values of papilla heights were observed around implants next to natural teeth., Competing Interests: The authors declare that they have no conflicts of interest., (Copyright © 2022 Gholam Ali Gholami et al.)

Objectives: This retrospective study was aimed to compare the clinical and radiographic outcomes of implants with the same body design but different collar surface (laser-microtextured vs. not laser-microtextured) after functional loading., Materials and Methods: Forty-three patients (29 females, 14 males) with 139 implants (60 laser-microtextured and 79 without laser microtexturing) were included in this study. Patients were consecutively included, and the data were collected during their implant maintenance visit. Clinical and radiographic parameters including probing depth (PD), bleeding on probing (BoP), and marginal bone loss (MBL) were recorded. In addition, the implant success index (ISI) score was determined. Statistical analysis was performed using the Mann-Whitney U test, the Kruskal-Wallis rank test, or the Pearson χ 2 test, along with binary logistic regression (p < 0.05 was considered to be statistically significant)., Results: The median post-loading follow-up was 24 months with 100% survival rate. There was no significant differences in terms of mean PD (3.01 mm vs. 2.63 mm), mean MBL (0.54 vs. 0.49 mm), BoP (56.7% vs. 53.2%), and ISI score between laser-microtextured collars and implants without laser microtexturing. Logistic regression revealed arch as a significant predictor of peri-implantitis (p = 0.02)., Conclusion: Within the limitations of this study, there was no statistically significant difference between the clinical and radiographic outcomes of implants with laser-microtextured and non-laser-microtextured collar designs. Clinical relevance Prospective studies with larger sample sizes and careful monitoring of implant placement protocols are needed for definite conclusions., (© 2021. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Introduction: Stem cell activities have different effects on tissue response and its outcomes. Low-level laser therapy (LLLT) can be considered a trigger to modify stem cell activities. The objective of the present experimental investigation was to study the effects of two protocols of LLLT on the proliferation and differentiation of human dental pulp stem cells (hDPSCs) cultured on sandblasted titanium discs. Methods: Cells obtained from human dental pulp were seeded/cultured on titanium discs and were set in 2 main groups: ( i ) Radiated cells using the gallium-aluminium-arsenide (GaAlAs) diode laser at a continuous wavelength of 808 nm at 3 J/cm 2 for 12 sec or 5 J/cm 2 for 20 seconds, and ( ii ) Non-irradiated cells serving as control groups. The impact of LLLTs on hDPSC-proliferation and viability was investigated using the MTT assay after 24, 72 and 96 hours. The alkaline phosphatase activity was studied with p-nitrophenylphosphate after 14 and 28 days. The ability of hDPSCs to express osteocalcin was investigated using real-time polymerase chain reaction after 28 days, while their attachment was observed under a scanning electron microscope (SEM) after 14 and 28 days. Results: Our study showed that LLLTs caused maximum cell proliferation in 96 hours ( P <0.001) with 3 J/cm 2 resulting in a higher proliferation rate. The highest activity of alkaline phosphatase and osteocalcin expression was observed in the laser radiation groups after 28 days. Conclusion: The outcomes of the current study showed that cultured hDPSCs on sandblasted titanium discs had a tendency towards increased cellular activity in response to LLLTs. Thus, LLLTs could regulate the activities of hDPSCs on bone repair surrounding the sandblasted titanium discs., (Copyright © 2022 J Lasers Med Sci.)

Objective: Consenting to a dental implant treatment plan may be a challenging decision for many patients, and they may prefer to consult their family and friends before making the final decision on this matter. The purpose of this preliminary report was to assess the role of family and friends, as the consultees, in consenting to a dental implant treatment plan by patients., Materials and Methods: A total of 106 patients with dental implants were questioned about whether they made the final decision regarding their dental implant treatment by themselves or they consulted their family and friends prior to finalizing their decision., Results: The majority of men (52.1%) reported making this decision by themselves and based on their own personal opinion, while most women (48.2%) reported making the decision after consulting their children., Conclusions: Within the limitations of this preliminary report, it appears that women are more willing to consult their children and friends on this matter compared with men. Also, men mostly consult their wives in making such a decision while women pay more attention to the opinion of their children in this respect.

Successful bone regeneration often requires induction by signaling molecules. Enamel matrix derivative (EMD) is said to enhance initial phases of healing. N-acetyl cysteine (NAC) is a molecule assumed to enhance osteogenesis and induce osteoblastic differentiation. This study sought to compare effects of EMD and NAC on proliferation, mineralization, and enzymatic activity of dental pulp mesenchymal stem cells (DPSCs). DPSCs were cultured on mineralized bone allograft (MBA) powder. After 24 hours, EMD in concentrations of 10, 50, and 100 μg/mL and NAC in 5 mM concentration were added. Methyl thiazolyl tetrazolium (MTT) assay was used for cell proliferation assessment at 1, 2, and 3 days. Osteoblastic differentiation of DPSCs was evaluated at 30 days, by alizarin red staining and assessment of alkaline phosphatase (ALP) activity. Both EMD and NAC caused time-dependent reduction of cell proliferation compared with the negative control. Maximum proliferation of DPSCs was observed in the 10 μg/mL EMD group at all time points, whereas NAC caused higher ALP activity and mineralization of DPSCs compared with EMD. In vitro application of NAC, as a signaling molecule, may effectively enhance bone regeneration by the induction of mineralization and enzymatic activity, despite the resultant reduction in cell proliferation rate.

Objective: Guided bone regeneration (GBR) is considered as a prerequisite in some cases of implant dentistry. For this purpose, bone materials are commonly used. Calcium compounds and Ca-P based materials like hydroxyapatite (HA, Ca10 (PO4)6(OH)2), due to their similarity with the human bone, can be used as graft materials for bone regeneration. This study aimed to evaluate biocompatibility of antler xenograft and compare the osteoconduction effects of antler xenograft with Cerabone in regeneration of calvarium bony defects of rabbits., Methods and Materials: Five defects with a diameter of 6 mm and a depth of 3 mm were prepared in the calvarium of four rabbits. Thereafter, two defects were randomly grafted with antler xenograft, two defects were filled with Cerabone, and one defect remained as the untreated group. Histological evaluations, including measuring percentage of new regenerated bone and the amounts of osteoblast, osteoclast, and osteocyte cells, were also performed. To do statistical analyses, paired t-test, chi-square, and Fisher tests were applied., Results: The percentage of new bone formation was significantly higher in antler xenograft (73.33%) and in Cerabone (48.91%) compared to the untreated group (18.91%). The amounts of osteocytes and osteoblasts were obtained as 3.52 ± 0.17 and 2.41 ± 0.24 in the Antler xenograft and as 2.57 ± 0.29 and 2.31 ± 0.32 in the Cerabone group, respectively. Bone marrow formation were significantly higher in antler xenograft (6.66 ± 5.34) and Cerabone (1.99 ± 3.17) compared to the untreated group., Conclusion: According to this pilot study, results of using antler xenograft as an osteoconductive materials in regeneration of rabbit calvarial defects are comparable with Cerabone. Although more clinical studies are needed.

Combining different procedures to reduce the number of surgical sessions and patient discomfort in implant placement and sinus floor elevation has been recommended, and evidence supports good outcomes. The aim of this study was to review the results of clinical studies on sinus floor elevation through extraction sockets and simultaneous immediate posterior implant placement. An electronic search was carried out in PubMed, Scopus, and Web of Science to find English articles published in or before August 2020. A manual search was also performed. Titles, abstracts, and the full-text of the retrieved articles were studied. Thirteen studies met our eligibility criteria: 6 retrospective case series, 3 case reports, 2 prospective cohort caseseries, 1 prospective case series, and 1 randomized controlled trial. Overall, 306 implants were placed; 2 studies reported implant survival rates of 91.7% and 98.57%. The others either did not report the survival rate or reported 100% survival. Sinus floor elevation through a fresh extraction socket and simultaneous immediate implant placement appears to be a predictable modality with a high success rate. However, proper case selection and the expertise of the clinician play fundamental roles in the success of such complex procedures.