Search

Background: The growing concern for player safety in rugby has led to an increased focus on head impacts. Previous laboratory studies have shown that rugby headgear significantly reduces peak linear and rotational accelerations compared to no headgear. However, these metrics may have limited relevance in assessing the effectiveness of headgear in preventing strain-based brain injuries like concussions. This study used an instantaneous deep-learning brain injury model to quantify regional brain strain mitigation of rugby headgear during drop tests. Tests were conducted on flat and angled impact surfaces across different heights, using a Hybrid III headform and neck., Results: Headgear presence generally reduced the peak rotational velocities, with some headgear outperforming others. However, the effect on peak regional brain strains was less consistent. Of the 5 headgear tested, only the newer models that use open cell foams at densities above 45 kg/m 3 consistently reduced the peak strain in the cerebrum, corpus callosum, and brainstem. The 3 conventional headgear that use closed cell foams at or below 45 kg/m 3 showed no consistent reduction in the peak strain in the cerebrum, corpus callosum, and brainstem., Conclusions: The presence of rugby headgear may be able to reduce the severity of head impact exposure during rugby. However, to understand how these findings relate to brain strain mitigation in the field, further investigation into the relationship between the impact conditions in this study and those encountered during actual gameplay is necessary., (© 2024. The Author(s).)

Purpose: The kissing stent (KS) method is low-risk compared with open surgery techniques. It is often used to treat aorto-iliac occlusive disease (AIOD). Deployment of the KS geometry has a high technical success rate. However, stent patency reduces in the first 5 years potentially due to deleterious flow behavior. Potentially harmful hemodynamics due to the KS were investigated in vitro., Methodology: A compliant phantom of the aorto-iliac bifurcation was manufactured. Two surrogate stent-grafts were deployed into the phantom in the KS configuration to investigate effects of the presence of the stents, including the compliance mismatch they cause, on the hemodynamics proximal and distal to the KS. The investigation used pulsatile flow through a flow circuit to simulate abdominal aortic flow. Particle image velocimetry (PIV) was used to quantify the hemodynamics., Results: PIV identified peak proximal and distal velocity in vitro was 0.71 and 1.40m·s -1 , respectively, which were within physiological ranges. Throughout systole, flow appeared normal and undisturbed. A lumen wall collapse in the sagittal plane formed during late systole and continued to early diastole proximal to the aorto-iliac bifurcation, distal to the inlet stent position. The wall collapse led to disturbed flow proximal to the stented region in early diastole producing potential recirculation zones and abnormal flow patterns., Conclusion: The normal systolic flow behavior indicates the KS configuration is unlikely to cause an inflammatory response of the arterial walls. The collapse has not been previously identified and may potentially cause long-term patency reduction. It requires further investigation., Clinical Impact: The role of this article is to provide further insight into the haemodynamic behavior through a stented aorto-iliac artery. The results of this investigation will improve the understanding of the effects that using the kissing stent method may have on a patient and help to identify high risk regions that may require more detailed monitoring. This paper also develops the in vitro modelling techniques that will enable further research that cannot be carried out within patients., Competing Interests: Declaration of Conflicting InterestsThe author(s) declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article.

In contact sports such as rugby, players are at risk of sustaining traumatic brain injuries (TBI) due to high-intensity head impacts that generate high linear and rotational accelerations of the head. Previous studies have established a clear link between high-intensity head impacts and brain strains that result in concussions. This study presents a novel approach to investigating the effect of a range of laboratory controlled drop test parameters on regional peak and mean maximum principal strain (MPS) predictions within the brain using a trained convolutional neural network (CNN). The CNN is publicly available at https://github.com/Jilab-biomechanics/CNN-brain-strains . The results of this study corroborate previous findings that impacts to the side of the head result in significantly higher regional MPS than forehead impacts. Forehead impacts tend to result in the lowest region-averaged MPS values for impacts where the surface angle was at 0° and 45°, while side impacts tend to result in higher regional peak and mean MPS. The absence of a neck in drop tests resulted in lower regional peak and mean MPS values. The results indicated that the relationship between drop test parameters and resulting regional peak and mean MPS predictions is complex. The study's findings offer valuable insights into how deep learning models can be used to provide more detailed insights into how drop test conditions impact regional MPS. The novel approach used in this paper to predict brain strains can be applied in the development of better methods to reduce the brain strain resulting from head accelerations such as protective sports headgear., (© 2024. The Author(s).)

The significance of biomechanical analyses for forensic time since death estimations has recently been demonstrated. Previous biomechanical analyses successfully discriminated post-mortem brain tissue from tissue with a post-mortem interval of at least one day when held at 20 °C. However, the practical utility of such analyses beyond day one at 20 °C was limited. This study investigates the storage, loss, and complex shear modulus of various brain regions in sheep stored at 4 °C in 24-hour intervals over four days post-mortem using rheometry tests. The aim is to identify the critical biomechanical tissue property values to predict post-mortem time and assess the temperature sensitivity of the rheometry method by comparing results to recent findings at 20 °C. Thirty sheep brains were examined, including the frontal lobe, parietal lobe, anterior and posterior deep brain, superior colliculi, pons, medulla, and cerebellum. Rheometry tests were conducted, and receiver operator characteristic analyses were employed to establish cut-off values. At 4 °C storage, all investigated biomechanical properties of the examined brain regions remained stable for at least one day post-mortem. Using cerebellar samples stored at 4 °C, a post-mortem interval of at least two days could be determined with excellent diagnostic ability. Complex shear modulus values below 1435 Pa or storage modulus values below 1313 Pa allowed prediction of two or more days post-mortem. Comparisons between 4 °C and 20 °C revealed brain region-specific results. For instance, the complex shear moduli of the anterior deep brain at 4 °C were significantly higher on all individual testing days when compared to 20 °C. In contrast, the combined medulla and pons samples were similar on each day. Rheometry testing of brain tissue consistently stored at 4 °C since death proved valuable for forensic time since death estimations starting from two days after death., (© 2024. The Author(s).)

Increased incidence of traumatic brain injury (TBI) imposes a growing need to understand the pathology of brain trauma. A correlation between the incidence of multiple brain traumas and rates of behavioural and cognitive deficiencies has been identified amongst people that experienced multiple TBI events. Mechanically, repetitive TBIs may affect brain tissue in a similar way to cyclic loading. Hence, the potential susceptibility of brain tissue to mechanical fatigue is of interest. Although temporal changes in ovine brain tissue viscoelasticity and biological fatigue of other tissues such as tendons and arteries have been investigated, no methodology currently exists to cyclically load ex vivo brain tissue. A novel rheology-based approach found a consistent, initial stiffening response of the brain tissue before a notable softening when subjected to a subsequential cyclic rotational shear. History dependence of the mechanical properties of brain tissue indicates susceptibility to mechanical fatigue. Results from this investigation increase understanding of the fatigue properties of brain tissue and could be used to strengthen therapy and prevention of TBI, or computational models of repetitive head injuries.

Time since death estimation is a vital part of forensic pathology. Despite the known tissue degradation after death, the efficacy of using biomechanical tissue properties to estimate time since death remains unexplored. Here, eight brain tissue localizations were sampled from the frontal lobe, parietal lobe, anterior and posterior deep brain, superior colliculi, pons, medulla, and cerebellum of 30 sheep; were then stored at 20 °C; and subsequently subjected to rheometry tests on days zero to four after death. Overall, the measured tissue storage modulus, loss modulus, and complex shear modulus decreased after death for all of the tested regions in a site-specific manner. Day zero to day one changes were the only 24-h interval, for which statistically significant differences in tissue mechanical moduli were observed for some of the tested brain regions. Based on receiver operator characteristic analyses between day zero and the pooled data of days one to four, a post mortem interval of at least 1 day can be determined with a sensitivity of 90%, a specificity of 92%, and a positive likelihood ratio of 10.8 using a complex shear modulus cut-off value of 1461 Pa for cerebellar samples. In summary, biomechanical properties of brain tissue can discriminate between fresh and at least 1-day-old samples stored at 20 °C with high diagnostic accuracy. This supports the possible value of biomechanical analyses for forensic time since death estimations. A striking advantage over established methods to estimate the time since death is its usability in cases of disintegrated bodies, e.g. when just the head is found., (© 2023. The Author(s).)

Rugby union is a popular sport played across the world. The physical contact inherent in the game means that players are at increased risk of concussive injury. In 2019, World Rugby created a new category of permitted headgear under Law 4 as a medical device. This established a pathway for headgear designed to reduce peak accelerations to be worn in matches. Investigations of the potential of soft-shelled protective headgear to reduce head impact accelerations have been mostly limited to the analysis of linear kinematics. However rotational head impact accelerations have long been implicated as far more injurious. The aim of this study, therefore, was to assess the linear and rotational acceleration reduction brought about by soft-shelled rugby headgear. A Hybrid III headform and neck were dropped onto a modular elastomer programmer impact surface, impacting at four different velocities (1.7-3.4 m/s) in five different impact orientations. Impact surface angles were 0°, 30°, and 45°. Peak linear and rotational accelerations, PLA and PRA respectively, were recorded. All headgear significantly reduced PLAs and PRAs when compared to a no headgear scenario. The new generation, headgear reduced all measures significantly more than the older generation of headgear. Impact locations offset from the center of mass of the headform resulted in the highest PRAs measured. As the impact surface angle increased, both PLAs and PRAs decreased. The study demonstrated that headgear tested lowered PLAs by up to 50%, and PRAs by up to 60% compared to the bare headform. Our data suggest that new generation headgear could make a difference on the field in reducing injurious impact accelerations in a collision., (© 2022. The Author(s).)

World Rugby employs a specific drop test method to evaluate headgear performance, but almost all researchers use a different variation of this method. The aim of this study was, therefore, to quantify the differences between variations of the drop testing method using a Hybrid III headform and neck in the following impact setups: (1) headform only, with a flat steel impact surface, approximating the World Rugby method, (2 and 3) headform with and without a neck, respectively, onto a flat MEP pad impact surface, and (4) headform and neck, dropped onto an angled MEP pad impact surface. Each variation was subject to drop heights of 75-600 mm across three orientations (forehead, side, and rear boss). Comparisons were limited to the linear and rotational acceleration and rotational velocity for simplicity. Substantial differences in kinematic profile shape manifested between all drop test variations. Peak accelerations varied highly between variations, but the peak rotational velocities did not. Drop test variation also significantly changed the ratios of the peak kinematics to each other. This information can be compared to kinematic data from field head impacts and could inform more realistic impact testing methods for assessing headgear., (© 2022. The Author(s).)

Cardiovascular diseases (CVDs) are the leading cause of death in the developed world. CVD can include atherosclerosis, aneurysm, dissection, or occlusion of the main arteries. Many CVDs are caused by unhealthy hemodynamics. Some CVDs can be treated with the implantation of stents and stent grafts. Investigations have been carried out to understand the effects of stents and stent grafts have on arteries and the hemodynamic changes post-treatment. Numerous studies on stent hemodynamics have been carried out using computational fluid dynamics (CFD) which has yielded significant insight into the effect of stent mesh design on near-wall blood flow and improving hemodynamics. Particle image velocimetry (PIV) has also been used to capture behavior of fluids that mimic physiological hemodynamics. However, PIV studies have largely been restricted to unstented models or intra-aneurysmal flow rather than peri or distal stent flow behaviors. PIV has been used both as a standalone measurement method and as a comparison to validate the CFD studies. This article reviews the successes and limitations of CFD and PIV-based modeling methods used to investigate the hemodynamic effects of stents. The review includes an overview of physiology and relevant mechanics of arteries as well as consideration of boundary conditions and the working fluids used to simulate blood for each modeling method along with the benefits and limitations introduced., (Copyright © 2022 by ASME.)

Face masks slow exhaled air flow and sequester exhaled particles. There are many types of face masks on the market today, each having widely varying fits, filtering, and air redirection characteristics. While particle filtration and flow resistance from masks has been well studied, their effects on speech air flow has not. We built a schlieren system and recorded speech air flow with 14 different face masks, comparing it to mask-less speech. All of the face masks reduced air flow from speech, but some allowed air flow features to reach further than 40 cm from a speaker's lips and nose within a few seconds, and all the face masks allowed some air to escape above the nose. Evidence from available literature shows that distancing and ventilation in higher-risk indoor environment provide more benefit than wearing a face mask. Our own research shows all the masks we tested provide some additional benefit of restricting air flow from a speaker. However, well-fitted mask specifically designed for the purpose of preventing the spread of disease reduce air flow the most. Future research will study the effects of face masks on speech communication in order to facilitate cost/benefit analysis of mask usage in various environments., (© 2022. The Author(s).)

The aorta is a high risk region for cardiovascular disease (CVD). Haemodynamic patterns leading to CVD are not well established despite numerous experimental and numerical studies. Most overlook effects of arterial compliance and pulsatile flow. However, rigid wall assumptions can lead to overestimation of wall shear stress; a key CVD determinant. This work investigates the effect of compliance on aortic arch haemodynamics experiencing pulsatility. Rigid and compliant phantoms of the arch and brachiocephalic branch (BCA) were manufactured. Stereoscopic particle image velocimetry was used to observe velocity fields. Higher velocity magnitude was observed in the rigid BCA during acceleration. However, during deceleration, the compliant phantom experienced higher velocity. During deceleration, a low velocity region initiated and increased in size in the BCA of both phantoms with irregular shape in the compliant. At mid-deceleration, considerably larger recirculation was observed under compliance compared to rigid. Another recirculation region formed and increased in size on the inner wall of the arch in the compliant during late deceleration, but not rigid. The recirculation regions witnessed identify as high risk areas for atherosclerosis formation by a previous ex-vivo study. The results demonstrate necessity of compliance and pulsatility in haemodynamic studies to obtain highly relevant clinical outcomes., (Copyright © 2021. Published by Elsevier Ltd.)

Concussion is an inherent risk of participating in contact, combat, or collision sports, within which head impacts are numerous. Kinematic parameters such as peak linear and rotational acceleration represent primary measures of concussive head impacts. The ability to accurately measure and categorise such impact parameters in real time is important in health and sports performance contexts. The purpose of this study was to assess the accuracy of the latest HitIQ Nexus A9 instrumented mouthguard (HitIQ Pty. Ltd. Melbourne Australia) against reference sensors in an aluminium headform. The headform underwent drop testing at various impact intensities across the NOCSAE-defined impact locations, comparing the peak linear and rotational acceleration (PLA and PRA) as well as the shapes of the acceleration time-series traces for each impact. Mouthguard PLA and PRA measurements strongly correlated with (R 2 = 0.996 and 0.994 respectively), and strongly agreed with (LCCC = 0.997) the reference sensors. The root mean square error between the measurement devices was 1 ± 0.6g for linear acceleration and 47.4 ± 35 rad/s 2 for rotational acceleration. A Bland-Altman analysis found a systematic bias of 1% for PRA, with no significant bias for PLA. The instrumented mouthguard displayed high accuracy when measuring head impact kinematics in a laboratory setting.

Purpose: The Frozen Elephant Trunk (FET) stent is a hybrid endovascular device that may be implemented in the event of an aneurysm or aortic dissection of the aortic arch or superior descending aorta. A Type 1B endoleak can lead to intrasaccular flow during systole and has been identified as a known failure of the FET stent graft. The purpose was to develop in-vitro modelling techniques to enable the investigation of the known failure., Methods: A silicone aortic phantom and 3D printed surrogate stent graft were manufactured to investigate the haemodynamics of a Type 1B endoleak. Physiological pulsatile flow dynamics distal to the surrogate stent graft were investigated in-vitro using Particle Image Velocimetry (PIV)., Results: PIV captured recirculation zones and an endoleak distal to the surrogate stent graft. The endoleak was developed at the peak of systole and sustained until the onset of diastole. The endoleak was asymmetric, indicating a potential variation in the phantom artery wall thickness or stent alignment. Recirculation was identified on the posterior dorsal line during late systole., Conclusions: The identification of the Type 1B endoleak proved that in-vitro modelling can be used to investigate complex compliance changes and wall motions. The recirculation may indicate the potential for long term intimal layer inflammatory issues such as atherosclerosis. These results may aid future remediation techniques or stent design. Further development of the methods used in this experiment may assist with the future testing of stents prior to animal or human trial., (© 2021. Biomedical Engineering Society.)

The purpose of this study was to examine the potential of soft-shelled rugby headgear to reduce linear impact accelerations. A hybrid III head form instrumented with a 3-axis accelerometer was used to assess headgear performance on a drop test rig. Six headgear units were examined in this study: Canterbury Clothing Company (CCC) Ventilator, Kukri, 2 nd Skull, N-Pro, and two Gamebreaker headgear units of different sizes (headgears 1-6, respectively). Drop heights were 238, 300, 610, and 912 mm with 5 orientations at each height (forehead, front boss, rear, rear boss, and side). Impact severity was quantified using peak linear acceleration (PLA) and head injury criterion (HIC). All headgear was tested in comparison to a no headgear condition (for all heights). Compared to the no headgear condition, all headgear significantly reduced PLA and HIC at 238 mm (16.2-45.3% PLA and 29.2-62.7% HIC reduction; P < 0.0005, η p 2  = 0.987-0.991). Headgear impact attenuation lowered significantly as the drop height increased (32.4-5.6% PLA and 50.9-11.7% HIC reduction at 912 mm). There were no significant differences in PLA or HIC reduction between headgear units 1-3. Post hoc testing indicated that headgear units 4-6 significantly outperformed headgear units 1-3 and additionally headgear units 5 and 6 significantly outperformed headgear 4 ( P < 0.05). The lowest reduction PLA and HIC was for impacts rear orientation for headgear units 1-4 (3.3 ± 3.6%-11 ± 5.8%). In contrast, headgear units 5 and 6 significantly outperformed all other headgear in this orientation ( P < 0.0005, η p 2  = 0.982-0.990). Side impacts showed the greatest reduction in PLA and HIC for all headgear. All headgear units tested demonstrated some degree of reduction in PLA and HIC from a linear impact; however, units 4-6 performed significantly better than headgear units 1-3., Competing Interests: The authors declare that they have no conflicts of interest., (Copyright © 2021 Nick Draper et al.)

Cardiovascular diseases (CVD) are the leading cause of death in the developed world and aortic aneurysm is a key contributor. Aortic aneurysms typically occur in the thoracic aorta and can extend into the descending aorta. The Frozen Elephant Trunk stent (FET) is one of the leading treatments for the aneurysms extending into the descending aorta. This study focuses on the in-vitro experimentation of a stented descending aorta, investigating the haemodynamics in a compliant phantom. A silicone phantom of the descending aorta was manufactured using a lost core casting method. A PVC stent was manufactured using the same mould core. Particle Image Velocimetry (PIV) was used for pulsatile studies, focusing specifically on the passive fixation at the distal end of the FET. The results showed an apparent expansion in the diastolic period that was identified to be a collapse in the lateral plane. Flow recirculation regions were identified during the collapse. The collapse was attributed to low upstream and high downstream pressures causing a vacuum effect. The findings may imply a potential risk introduced by the FET stent that requires further investigation.

Background: Understanding airflow through human airways is of importance in drug delivery and development of assisted breathing methods. In this work, we focus on development of a new method to obtain an averaged upper airway geometry from computed tomography (CT) scans of many individuals. This geometry can be used for air flow simulation. We examine the geometry resulting from a data set consisting of 26 airway scans. The methods used to achieve this include nasal cavity segmentation and a deformable template matching procedure., Methods: The method uses CT scans of the nasal cavity of individuals to obtain a segmented mesh, and coronal cross-sections of this segmented mesh are taken. The cross-sections are processed to extract the nasal cavity, and then thinned ('skeletonized') representations of the airways are computed. A reference template is then deformed such that it lies on this thinned representation. The average of these deformations is used to obtain the average geometry. Our procedure tolerates a wider variety of nasal cavity geometries than earlier methods., Results: To assess the averaging method, key landmark points on each of the input scans as well as the output average geometry are located and compared with one another, showing good agreement. In addition, the cross-sectional area (CSA) profile of the nasal cavities of the input scans and average geometry are also computed, showing that the CSA of the average model falls within the variation of the population., Conclusions: The use of a deformable template method for aligning and averaging the nasal cavity provides an improved, detailed geometry that is unavailable without using deformation.