Search

The aim of this study was to evaluate the influence of medial femoral condyle (MFC) free flap harvest on donor site muscle strength and kinematic parameters of gait. The study included 30 patients treated for head and neck squamous cell carcinoma who underwent reconstruction with an MFC free flap. In each case, the donor site was the left thigh. A dynamometer was used to measure muscle strength, in isokinetic bilateral mode and with concentric contraction for the extension/flexion knee pattern, at 18 months postoperative. In addition, kinematic data were obtained and evaluated. On statistical analysis, no significant difference in muscle strength of the quadriceps muscle was found between the left involved and right uninvolved lower extremities (P = 0.124). Also, when comparing hamstring strength, no statistically significant difference was found between the left involved and right uninvolved sides (P = 0.210). Moreover, spatiotemporal gait parameters did not differ significantly between the involved and uninvolved legs (all P > 0.05), and no differences in kinematic or kinetic parameters were observed. This study reports the effects of MFC free flap harvest on the knee muscle strength and locomotion of patients. For most biomechanical parameters investigated, there was no effect (positive or negative)., Competing Interests: Competing interests None., (Copyright © 2024 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.)

Objective: It is expected that in classical ballet dancers would be able to execute all the techniques symmetrically from the right as well as from the left side of the body. This study aimed to evaluate the symmetry of kinematic parameters of hip joints, knee joints, and foot progression angle of the left and right lower extremities (LE) in five classical ballet positions, as well as the symmetry of active and passive turnout and range of passive hip external rotation., Methods: The experimental testing involved 12 female pre-professional ballet dancers. Three measurements of range of motion, made using a standard goniometer, were carried out to characterize the study group. Kinematic data of left and right LE in the five classical ballet positions were recorded using a motion capture system., Results: The comparisons revealed significantly lower (p < 0.01) hip external rotation values by 9.8% (1st position), 5.4% (2nd position), and 8.5-11.8% (3rd position) for the right LE than the left LE. Moreover for 3rd, 4th and 5th positions, there was significantly higher (p < 0.05) hip external rotation values by 7.0%-27.2% in the back LE than the front LE. In 4th position there was asymmetry in foot progression angle with significantly lower values (p < 0.01) by 5.3% in the front LE (left) than the back LE (right). In case of goniometric measurements, the results showed significantly higher (p < 0.05) passive hip external rotation values by 10.8% for the right LE than the left LE., Conclusion: The perfect ballet symmetry pursued by dancers is not in fact so ideal. The most astonishing result was the existence of statistically significant differences in hip external rotation in the case of the 1st and 2nd positions.

To investigate changes in culinary practices associated with the arrival of farming, we analysed the organic residues of over 1,000 pottery vessels from hunter-gatherer-fisher and early agricultural sites across Northern Europe from the Lower Rhine Basin to the Northeastern Baltic. Here, pottery was widely used by hunter-gatherer-fishers prior to the introduction of domesticated animals and plants. Overall, there was surprising continuity in the way that hunter-gatherer-fishers and farmers used pottery. Both aquatic products and wild plants remained prevalent, a pattern repeated consistently across the study area. We argue that the rapid adaptation of farming communities to exploit coastal and lagoonal resources facilitated their northerly expansion, and in some cases, hunting, gathering, and fishing became the most dominant subsistence strategy. Nevertheless, dairy products frequently appear in pottery associated with the earliest farming groups often mixed with wild plants and fish. Interestingly, we also find compelling evidence of dairy products in hunter-gatherer-fisher Ertebølle pottery, which predates the arrival of domesticated animals. We propose that Ertebølle hunter-gatherer-fishers frequently acquired dairy products through exchange with adjacent farming communities prior to the transition. The continuity observed in pottery use across the transition to farming contrasts with the analysis of human remains which shows substantial demographic change through ancient DNA and, in some cases, a reduction in marine consumption through stable isotope analysis. We postulate that farmers acquired the knowledge and skills they needed to succeed from local hunter-gatherer-fishers but without substantial admixture.

Modern humans have populated Europe for more than 45,000 years 1,2 . Our knowledge of the genetic relatedness and structure of ancient hunter-gatherers is however limited, owing to the scarceness and poor molecular preservation of human remains from that period 3 . Here we analyse 356 ancient hunter-gatherer genomes, including new genomic data for 116 individuals from 14 countries in western and central Eurasia, spanning between 35,000 and 5,000 years ago. We identify a genetic ancestry profile in individuals associated with Upper Palaeolithic Gravettian assemblages from western Europe that is distinct from contemporaneous groups related to this archaeological culture in central and southern Europe 4 , but resembles that of preceding individuals associated with the Aurignacian culture. This ancestry profile survived during the Last Glacial Maximum (25,000 to 19,000 years ago) in human populations from southwestern Europe associated with the Solutrean culture, and with the following Magdalenian culture that re-expanded northeastward after the Last Glacial Maximum. Conversely, we reveal a genetic turnover in southern Europe suggesting a local replacement of human groups around the time of the Last Glacial Maximum, accompanied by a north-to-south dispersal of populations associated with the Epigravettian culture. From at least 14,000 years ago, an ancestry related to this culture spread from the south across the rest of Europe, largely replacing the Magdalenian-associated gene pool. After a period of limited admixture that spanned the beginning of the Mesolithic, we find genetic interactions between western and eastern European hunter-gatherers, who were also characterized by marked differences in phenotypically relevant variants., (© 2023. The Author(s).)

Human history has been shaped by global dispersals of technologies, although understanding of what enabled these processes is limited. Here, we explore the behavioural mechanisms that led to the emergence of pottery among hunter-gatherer communities in Europe during the mid-Holocene. Through radiocarbon dating, we propose this dispersal occurred at a far faster rate than previously thought. Chemical characterization of organic residues shows that European hunter-gatherer pottery had a function structured around regional culinary practices rather than environmental factors. Analysis of the forms, decoration and technological choices suggests that knowledge of pottery spread through a process of cultural transmission. We demonstrate a correlation between the physical properties of pots and how they were used, reflecting social traditions inherited by successive generations of hunter-gatherers. Taken together the evidence supports kinship-driven, super-regional communication networks that existed long before other major innovations such as agriculture, writing, urbanism or metallurgy., (© 2022. The Author(s).)

In sweep rowers, the lower extremities muscle strength translates into the driving force of the boat. Therefore, isokinetic assessment of muscle torque is used by coaches as an indicator of the level of athletes' preparation for competitions. A total of 22 elite sweep rowers performed an isokinetic test of knee joint flexors and extensors, and a test on an asymmetric ergometer with the electromyography measures. Significantly higher quadriceps peak torque was shown during the beginning than the end of the preparatory period ( p < 0.05). However, there was no significant knee peak torque difference between the lower extremities ( p = 0.398). In the case of the electromyography test of quadriceps, hamstrings and lumbar erector spinae, analysis demonstrated significant bioelectrical activity differences between the sides ( p < 0.05). Lower values of quadriceps peak torque at the end of the preparatory period may result from a decrease in the number of power training units during the entire preparatory period. A similar muscle strength between both lower extremities seems to be the correct result in the context of injury prevention. In turn, significant bioelectrical activity differences between the sides possibly are associated with the asymmetric movement pattern in sweep rowers.

The introduction of pottery vessels to Europe has long been seen as closely linked with the spread of agriculture and pastoralism from the Near East. The adoption of pottery technology by hunter-gatherers in Northern and Eastern Europe does not fit this paradigm, and its role within these communities is so far unresolved. To investigate the motivations for hunter-gatherer pottery use, here, we present the systematic analysis of the contents of 528 early vessels from the Baltic Sea region, mostly dating to the late 6th-5th millennium cal BC, using molecular and isotopic characterization techniques. The results demonstrate clear sub-regional trends in the use of ceramics by hunter-gatherers; aquatic resources in the Eastern Baltic, non-ruminant animal fats in the Southeastern Baltic, and a more variable use, including ruminant animal products, in the Western Baltic, potentially including dairy. We found surprisingly little evidence for the use of ceramics for non-culinary activities, such as the production of resins. We attribute the emergence of these sub-regional cuisines to the diffusion of new culinary ideas afforded by the adoption of pottery, e.g. cooking and combining foods, but culturally contextualized and influenced by traditional practices., Competing Interests: We declare we have no competing interests., (© 2020 The Authors.)

The turnout of the lower extremities is the major component of the classical ballet positions (CPs) and correctly is initiated in the hips. The aim of this research was to determine the differences in the electromyographic and kinematic variables in the five CPs in ballet students with greater and lesser amount of passive hip external rotation (HER). A group of 14 female pre-professional ballet dancers 11-16 years of age participated in the study. Based on the amount of passive HER, participants with higher values made up greater rotation group (n = 7) whereas those with lesser values formed lesser rotation group (n = 7). Electromyographic activity of 14 muscles from right side of the trunk and right lower extremity was recorded with the surface electrodes while subjects were standing in all five CPs (CP1-CP5). The external rotation of the hips, knees and feet were recorded with the motion capture system. The kinematic differences between the groups were revealed in asymmetric positions CP4 and CP5 where foot progression angle was significantly lesser in forward than backward setting only in lesser rotation group. In lesser rotation group the ankle and back muscles were more engaged in CPs while abdominal and hip muscles less when compared with greater rotation group. This finding suggests that in the group with lesser passive HER the mechanism of forced turnout was employed. The most remarkable finding in our work was that various electromyographic patterns can be observed between groups in all CPs, while kinematic differences may be marked only in asymmetric positions., Competing Interests: The authors have declared that no competing interests exist.

Purpose: The main purpose was to determine the values of spatio-temporal parameters and ground reaction forces during the swingthrough crutch gait., Methods: Eighteen male patients with unilateral injury within the foot, ankle or shank (age: 25.4 ± 7.7 years, body height: 1.79 ± 0.06 m, body mass: 76.1 ± 11.5 kg) participated in the study. In the experiment, 6-camera optoelectronic motion capture system and force platform were used. The measurements of spatio-temporal parameters and ground reaction force (GRF) were performed for uninjured lower extremity (ULE), crutch on the ULE side (CrU) and crutch on the injured lower extremity side (CrI)., Results: Analysis demonstrated a significantly longer stance phase and a significantly shorter swing phase for ULE than crutches ( p < 0.05), and a significantly longer first, compared to the second, double support phase ( p < 0.05). Comparisons showed also significantly higher maximum values of the vertical GRF and extreme values of the horizontal antero-posterior GRF for ULE than crutches ( p < 0.05) as well as for CrI than CrU ( p < 0.05)., Conclusions: The present study provides biomechanical data related to the spatio-temporal parameters and GRFs for the swing-through crutch gait in patients with the lower extremity injuries.

Purpose: The study aimed to determine which of the five classical ballet positions is the most demanding regarding muscular activity, values of external rotation in the hip joints, angular values of foot progression as well as the inclination (tilt) of the pelvis in the sagittal plane., Methods: In this cross-sectional study, 14 female pre-professional ballet dancers (aged 11-16) participated. Participants were tasked with the sequential adoption of five classical ballet positions (CP1-CP5). The electromyographic activity of the muscles of the trunk and the lower limb was recorded with surface electrodes. Kinematic data including hip and knee external rotation, foot progression angle and pelvic tilt were collected using a motion capture system., Results: Symmetric positions CP1 and CP2 were not as demanding as asymmetric CP3-CP5. Higher values of hip and foot external rotation without greater muscular effort in CP2 than CP1 was noticed. Considering asymmetric positions, CP3 did not trigger a greater activity of hip or foot muscular groups than CP4 and CP5. CP4 was characterised by the greatest pelvic anterior tilt and the lowest activity of GM in the forward lower limb. In CP5, forward lower limb entailed a higher activity of muscles supporting the foot than in the remaining positions., Conclusion: In terms of biomechanics, the most demanding classical ballet position in pre-professional dancers is CP4, followed by CP5, CP3, CP1 and CP2. This finding can be applied in educational methodology of dancers, figure skaters, synchronized swimmers, acrobatic gymnasts, rhythmic gymnasts or cheerleaders.

Purpose: The aim of this study was to establish the reference values of spatiotemporal parameters, joint angles, ground reaction forces and plantar pressure distribution collected simultaneously on the same measurement path during normal gait in a homogenous group of young, healthy women., Methods: The studied group consisted of 28 healthy women aged 21 years on average. The motion capture system BTS Smart-D, 2 AMTI force platforms and Footscan pedobarographic platform were used in this research. The 14-metre measurement path and the 6-metre distance that examined women had to walk through before entering the measurement area ensured that a natural gait pattern was recorded. Statistical analysis was performed to evaluate differences between right and left lower extremities., Results: The applied method enabled collecting several parameters regarding normal female gait biomechanics such as: spatiotemporal parameters, angle-time characteristics as well as range of motion of pelvis, hip, knee and ankle joints in gait cycle, force-time characteristics and peaks of ground reaction force components in stance phase, peak pressure and time of loading of defined foot regions in stance phase., Conclusions: The results may be used by clinicians, physiotherapists or researchers as a reference in diagnosing gait disorders or evaluating patient's walking pattern. In recent literature there are some disparities in gait parameters reference values even regarding similar research groups. These differences may arise from distinct method, slower or faster gait, other laboratory environment etc. This should be considered and more than one source of normative values should be checked when searching for reference data.

Purpose: Patient recovery after a surgical procedure depends, among other factors, on the amount of the body weight with which patient loads lower limb. Research studies report different results of the degree of body weight with which lower limb is loaded during three-point crutch gait. The aim of this study was to evaluate the level of the ground reaction forces (GRF) during crutch gait used by patients after total hip arthroplasty (THA) in the first week after discharge from the orthopaedic units., Methods: Ten female patients diagnosed with primary unilateral coxarthrosis participated in a single measurement session. In order to record kinematic and dynamic variables of this gait pattern motion analysis system was used together with two force plates. The static test of body weight distribution between lower limbs was performed on a dual-top stabilometric plate., Results: The average peak values of loading on the operated (O) limb during mid stance and terminal stance of three-point crutch gait were 64.6% and 64.3% of body weight (BW), respectively, whereas in the case of the nonoperated (NO) limb 103.5%BW and 108.8%BW, respectively. The maximum loads on the crutches were significantly higher (by 9%BW) on the NO side as compared to the O side ( p < 0.05). During the static test, average values of body weight distribution on the O and NO limb were 36%BW and 64%BW, respectively., Conclusions: The patients showed surprisingly similar level of loading on the O limb. The weight bearing on the O limb was lower during static trial than during three-point crutch gait.

Purpose: Dynamic loads during landings determined by the ground reaction forces (GRFs) may elaborate internal loads and increase the risk of overload knee injuries as a result of performing volleyball jumps many times. The study dealt with a biomechanical assessment of dynamic load indicators in female volleyball players for the motion sequence of take-off-landing in blocks and attacks., Methods: Twelve professional female volleyball players participated in the study. Blocks and attacks were filmed by two cameras. GRFs vs. time graphs were recorded with the use of a force platform. Values of dynamic load indicators in terms of the relations of peak of vertical component of GRF, build-up index of this force (BIF), and power output (P) during landing to the vGRF, BIF and P during take-off (L/T) were calculated., Results: The statistically significant ( p < 0.05) highest values of L/T indicators were found for back row attack spikes: 2.4 (vGRF), 12.2 (BIF) and 3.1 (P). In the case of blocks, slide attack spikes and attack line spikes, results of these variables were in range: 1.8÷2.1, 5.9÷7.6 and 2.1÷2.9, respectively., Conclusions: The reduction of GRFs during landings contributes to decreasing the level of the load indicators L/T which should minimize the incidence of anterior cruciate ligament and patellar tendon injuries in female volleyball players.

The study characterizes the idea behind the research project which consists in biomechanical and kinesiological analysis of three point crutch gait. The structure of the study is in part similar to an earlier publication of the authors [1], which discussed swing through gait. By defining the three point crutch gait and describing its general kinematic structure as well as synthetically analyzing the state of knowledge, the authors formulated the purpose of the study, the adopted research model - including the description of the modern and integrated measurement systems that were used and which consisted of: 2 AMTI force plates integrated into a measurement walkway, a set of 6 optoelectronic cameras of the BTS System as well as a multichannel kinesiological electromyography performed with the use of the NORAXON System. All phases of the research were characterized, presenting the adopted research protocol in its entirety.