Search

We present an electrically switchable, compact metasurface device based on the metallic polymer PEDOT:PSS in combination with a gel polymer electrolyte. Applying square-wave voltages, we can reversibly switch the PEDOT:PSS from dielectric to metallic. Using this concept, we demonstrate a compact, standalone, and CMOS compatible metadevice. It allows for electrically controlled ON and OFF switching of plasmonic resonances in the 2-3 µm wavelength range, as well as electrically controlled beam switching at angles up to 10°. Furthermore, switching frequencies of up to 10 Hz, with oxidation times as fast as 42 ms and reduction times of 57 ms, are demonstrated. Our work provides the basis towards solid state switchable metasurfaces, ultimately leading to submicrometer-pixel spatial light modulators and hence switchable holographic devices., (© 2023 the author(s), published by De Gruyter, Berlin/Boston.)

In this manuscript we present a versatile platform for introducing functional redox species into tailor-made 3D redox polymer networks. Electrochemical characterization based on cyclic voltammetry is applied to verify the immobilization of the redox species within the conducting networks. Ultimately this strategy shall be extended to (photo)electrocatalytic applications which will profit from the conducting polymer matrix. Soluble precursor copolymers are synthesized via radical copolymerization of vinyltriphenylamine (VTPA) with chloromethylstyrene (CMS) in different ratios, whereas CMS is subsequently converted into azidomethylstyrene (AMS) to yield poly(VTPA-co-AMS) copolymers. Spin-coating of poly(VTPA-co-AMS) on gold electrodes yields thin films which are converted into stable polymer network structures by electrochemical crosslinking of the polymer chains via their pendant triphenylamine groups to yield N,N,N',N'-tetraphenylbenzidine (TPB) crosslinking points. Finally, the resulting redox-active, TPB-crosslinked films are functionalized with ethynylferrocene (EFc) as a representative redox probe using a click reaction. Main experimental tools are polarization modulation infrared reflection absorption spectroscopy and scan rate dependent cyclic voltammetry. Especially the latter proves the successful conversion and the immobilization of redox probes in the polymer matrix. The results are compared with the reference system of azide-terminated self-assembled monolayers on gold substrates, allowing to distinguish between free and immobilized EFc species., (© 2021 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.)

Composite electrolytes comprising a polymer plus Li salt matrix and embedded fillers have the potential of realizing high lithium-ion conductivity, good mechanical properties, wide electrochemical operational window, and stability against metallic lithium, all of which are essential for the development of high-energy-density all-solid-state lithium-ion batteries. In this study, a solvent-free approach has been used to prepare composite electrolytes with tetragonal and cubic phase garnets synthesized via nebulized spray pyrolysis with polyethylene oxide (PEO) being the polymer component. Electrochemical impedance spectroscopy (EIS) is used to examine a series of composites with different garnets and weight fractions. The results show that with the increase in the ceramic weight fraction in the composites, ionic conductivity is reduced and alternative Li-ion transport pathways become accessible for composites as compared to the filler-free electrolytes. An attempt is made to understand the ion transport mechanism within the composites. The role of the chemical and morphological properties of the ceramic filler in polymer-rich and ceramic-rich composite electrolytes is explained by studying the blends of nonconducting ceramics with the Li-conducting polymer, indicating that the intrinsic conductivity of the ceramic filler significantly contributes to the overall conductive process in the ceramic-rich systems. Further, the stability of the garnet/PEO interface is studied via X-ray photoelectron spectroscopy, and its impact on the lithium-ion transport is studied using EIS.

We report the synthesis and characterization of a novel series of push-pull chromophores bearing 1D linear and β-branched thiophenes as π-conjugated spacers between a 2,2,4,7-tetramethyl-1,2,3,4-tetrahydroquinoline electron donor unit and dicyano- and tricyanovinylene electron acceptor groups. The effect of the introduction of β-thiophenes on the linear and nonlinear (NLO) optical properties as well as electrochemical and thermal data is studied in detail by performing a comparative study between the branched and 1D linear systems. In addition, a parallel DFT computational study is used to evaluate structure-property relationships. The non-linear optical behavior of the molecules both in solution and in solid state as electro-optic (EO) films using a guest-host approach shows very promising performance for electro-optic applications with high molecular first hyperpolarizabilities (μβ) of 4840 × 10 -48 esu and electro-optic coefficients r 33 reaching 650 pm V -1 . One highlight is that the electro-optic films of the β-branched chromophores are superior in terms of thermal stability in device operation as measured by a transmissive modified reflective Teng-Man method. This work provides guidelines for the design of improved electro-optic materials including β-branched chromophores which could be useful for practical EO applications, where both enhanced β and r 33 values together with chemical and thermal stability are necessary.

The control of the morphology of semiconducting semicrystalline polymers is crucial to the performance of various electronic devices. Among other superstructures in semicrystalline polymers, spherulites stand out for various reasons. They are highly ordered, relatively easy to grow, and their underlying molecular structure provides anisotropic optical and electronic properties of the resulting polymeric material. In this feature article, a short overview of classical crystallization theory is given as well as a brief introduction to spherulites as supermolecular structures. The article then focuses on semicrystalline polymers with semiconducting properties. From classical melt crystallization toward solvent vapor annealing, different strategies of growing spherulites of these types of polymers are presented and examples of the corresponding polymers and their resulting morphology are given. Eventually, the potential application of spherulitic thin films in organic electronics such as field-effect transistors is demonstrated. Conductivity and mobility measurements are shown, particularly focusing on the anisotropy of the latter., (© 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Monolithic polymeric supports have been prepared by electron-beam-triggered free-radical polymerization using a mixture of glycidyl methacrylate and trimethylolpropane triacrylate in 2-propanol, 1-dodecanol, and toluene. Under appropriate conditions, phase separation occurred, which resulted in the formation of a porous monolithic matrix that was characterized by large (convective) pores in the 30 μm range as well as pores of <600 nm. The epoxy groups in pores of >7 nm were hydrolyzed by using poly(styrenesulfonic acid) (Mw = 69,400 g mol(-1), PDI=2.4). The remaining epoxy groups inside pores of <7 nm were subjected to aminolysis with norborn-5-en-2-ylmethylamine (2) and provided covalently bound norborn-2-ene (NBE) groups inside these pores. These NBE groups were then treated with the first-generation Grubbs initiator [RuCl2 (PCy3 )2 (CHPh)]. These immobilized Ru-alkylidenes were further used for the surface modification of the small pores by a grafting approach. A series of monomers, that is, 7-oxanorborn-5-ene-2,3-dicarboxylic anhydride (3), norborn-5-ene-2,3-dicarboxylic anhydride (4), N,N-di-2-pyridyl-7-oxanorborn-5-ene-2-carboxylic amide (5), N,N-di-2-pyridylnorborn-5-ene-2-carboxamide (6), N-[2-(dimethylamino)ethyl]bicyclo[2.2.1]hept-5-ene-2-carboxamide (7), and dimethyl bicyclo[2.2.1]hept-5-en-2-ylphosphonate (8), were used for this purpose. Finally, monoliths functionalized with poly-5 graft polymers were used to permanently immobilize Pd(2+) and Pt(4+), respectively, inside the pores. After reduction, metal nanoparticles 2 nm in diameter were formed. The palladium-nanoparticle-loaded monoliths were used in both Heck- and Suzuki-type coupling reactions achieving turnover numbers of up to 167,000 and 63,000, respectively., (Copyright © 2010 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)