Search

In recent years, the focus has been on the use of calcium carbonate-based seashell wastes in the production of new thermoplastic and thermoset polymer materials, paving the way for their use as biofillers in polymeric composites. In this study, it is aimed to obtain a new polymeric composite material by doping Chamelea gallina shells, on polylactic acid (PLA)/polyethylene glycol (PEG) blend. Structural characterization of the obtained PLA/PEG blend/C. gallina composite films was performed with attenuated total reflection infrared spectroscopy (ATR-IR). When the thermal properties of composite materials were examined by thermogravimetric analysis (TGA), it was determined that the thermal stability of polymeric composites increased with the addition of C. gallina. SEM images showed that the polymer blend films, which appeared to have a porous structure, filled the pores with increasing C. gallina ratio. It was observed that the biodegradability of PLA/PEG blend composite films decreased with increasing C. gallina shells addition. However, C. gallina had a positive effect on the swelling and water absorption capacities of polymeric composites. The increase in tensile strength and elongation at break values of PLA/PEG blend/C. gallina composite films with increasing C. gallina means that the mechanical properties of the polymer are improved. [ABSTRACT FROM AUTHOR]

Rare earth elements (RRE), due to their unique magnetic, electrical, and optical properties, are an important group of elements demanded in many application areas from machine technology to the health industry. In this study, new composites were obtained by mixing Erbium oxide (Er2O3), one of the rare earth element oxides, into PCL–PEG blend, which is also an important material group, in different ratios. The characteristic functional groups of the obtained polymer blend/Er2O3 nanocomposites were determined by the ATR-IR, and as the erbium oxide ratio increased, characteristic peaks of the polymers in the blend as well as characteristic signals of the Er–O–Er bond were found. When the thermal behavior of the obtained composites was examined, it was observed that the polymer blend exhibited miscible blend properties and the melting temperature of the polymer blend increased as the Er2O3 ratio increased. In addition, it was determined that the thermal stability of the composite increased significantly. X-ray measurements of composites at room temperature support other measurement results. It was determined that the presence of Er-RRE oxide increased the crystal structure feature in the polymer blend composite. Gamma radiation shielding capabilities of polymer materials containing different erbium ratios were investigated by calculating shielding parameters such as half value layer (HVL), radiation protection efficiency (RPE), and mean free path (MFP). Cs-137 and Co-60 radioactive sources were used as gamma sources. According to the obtained measurement results, Erbium oxide increased the absorption property of the polymer composite material. [ABSTRACT FROM AUTHOR]

In this study, the rare earth Gadolinium (Gd) element was added to the NiMnSn alloy, which is an alternative to the NiMnGa alloy group, with the increasing popularity of magnetic shape memory alloys. Since rare earth elements have strategic importance for our country in recent years, Gd element has been preferred in this study. X-rays and SEM-EDX analysis were performed to determine the morphological properties of the crystal structure and microstructure of the alloys. Magnetic measurements of the alloys were made with the physical property measuring device and it was determined that the magnetization values decreased with the addition of Gd. [ABSTRACT FROM AUTHOR]

Recently, there has been a great demand for boron‐containing compounds (BCCs) with unique biological properties. The demand for the use of these compounds not alone but as additives in composite materials is increasing day by day. In this study, the effect of adding B2O3 compound to the blend of PLA and PEG polymers, which is an important biocompatible shape memory polymer, was investigated. In order to examine the effect of increasing B2O3 additive on the thermal properties of PLA‐PEG blend, it was determined by using a Differential Scanning Calorimetry (DSC) and thermogravimetric analyzer (TGA), and it was seen that while the melting temperature of PEG decreased, the melting temperature of PLA increased. In addition, when the thermal stability of the composites was examined, increasing of thermal stability was observed with the addition of B2O3 and a three‐step degradation occurred. It was determined that the B2O3/PLA‐PEG composite was homogeneous by taking X‐ray measurements and SEM measurements. The antimicrobial property of the PLA‐PEG blend improved with the increasing B2O3 contribution were observed from the antimicrobial activity measurements of the composite against 4 different bacteria. However, it was determined that the PLA‐PEG blend preserved its shape memory effect with increasing diboron trioxide contribution. [ABSTRACT FROM AUTHOR]