Search

The SKA will be the largest radio astronomy observatory ever built, providing unprecedented sensitivity over a very broad frequency (50 MHz to 15.3 GHz). The SKA-Low (50 - 350 MHz), will be built at the MRO in Western Australia. It will consist of 512 stations each composed of 256 dual-polarised antennas, and the sensitivity of an individual station is pivotal to the performance of the entire SKA-Low telescope. The answer to the question in the title is, it depends. The sensitivity of a low frequency array, such as an SKA-Low station, depends strongly on the pointing direction of the digitally formed station beam and the local sidereal time (LST), and is different for the two orthogonal polarisations of the antennas. The accurate prediction of the SKA-Low sensitivity in an arbitrary direction in the sky is crucial for future observation planning. We present here a sensitivity calculator for the SKA-Low radio telescope, using a database of pre-computed sensitivity values for two realisations of an SKA-Low station architecture. One realisation uses the log-periodic antennas selected for SKA-Low. The second uses a known benchmark, in the form of the bowtie dipoles of the MWA. Data collected by both stations (deployed at the MRO in 2019) were used to measure their sensitivity at selected frequencies and over at least 24 h intervals, and were compared to the predictions described in this paper. The sensitivity values stored in the SQLite database were pre-computed for the X, Y and Stokes I polarisations in 10 MHz frequency steps, 0.5 hour LST intervals, and 5 degree resolution in pointing directions. The database allows users to estimate the sensitivity of SKA-Low for their favourite object using interactive web-based or command line interface, which can also calculate the sensitivity for arbitrary pointing directions, frequencies, and times without interpolations., Comment: 15 pages, 17 figures, Accepted for publication in PASA

The design and development process for the Square Kilometre Array (SKA) radio telescope, the Low Frequency Aperture Array component, was progressed during the SKA pre-construction phase by an international consortium, with the goal of meeting requirements for a critical design review. As part of the development process a full-sized prototype SKA Low station was deployed, the Aperture Array Verification System 1 (AAVS1). We provide a system overview and describe the commissioning results of AAVS1, which is a low frequency radio telescope with 256 dual-polarisation log-periodic dipole antennas working as a phased array. A detailed system description is provided, including an in-depth overview of relevant sub-systems, ranging from hardware, firmware, software, calibration,and control sub-systems. Early commissioning results cover initial bootstrapping, array calibration, stability testing, beam-forming,and on-sky sensitivity validation. Lessons learned are presented, along with future developments.

We report characterization results for an engineering prototype of a next-generation low-frequency radio astronomy array. This prototype, which we refer to as the Aperture Array Verification System 0.5 (AAVS0.5), is a sparse pseudo-random array of 16 log-periodic antennas designed for 70-450 MHz. It is co-located with the Murchison Widefield Array (MWA) at the Murchison Radioastronomy Observatory (MRO) near the Australian Square Kilometre Array (SKA) core site. We characterize the AAVS0.5 using two methods: in-situ radio interferometry with astronomical sources and an engineering approach based on detailed full-wave simulation. In-situ measurement of the small prototype array is challenging due to the dominance of the Galactic noise and the relatively weaker calibration sources easily accessible in the southern sky. The MWA, with its 128 "tiles" and up to 3 km baselines, enabled in-situ measurement via radio interferometry. We present array sensitivity and beam pattern characterization results and compare to detailed full-wave simulation. We discuss areas where differences between the two methods exist and offer possibilities for improvement. Our work demonstrates the value of the dual astronomy-simulation approach in upcoming SKA design work., Comment: 10 pages, accepted for publication in IEEE Transactions on Antennas and Propagation

We present an in-situ antenna characterization method and results for a "low-frequency" radio astronomy engineering prototype array, characterized over the 75-300 MHz frequency range. The presence of multiple cosmic radio sources, particularly the dominant Galactic noise, makes in-situ characterization at these frequencies challenging; however, it will be shown that high quality measurement is possible via radio interferometry techniques. This method is well-known in the radio astronomy community but seems less so in antenna measurement and wireless communications communities, although the measurement challenges involving multiple undesired sources in the antenna field-of-view bear some similarities. We discuss this approach and our results with the expectation that this principle may find greater application in related fields., Comment: 4 pages, 6 figures; 2014 IEEE Conference on Antenna Measurements & Applications (CAMA), 16-19 Nov. 2014, pp.1-4