Search

The energy distribution of an electron gun is one of the most important characteristics determining the performance of electron beam-based instruments, such as electron microscopes and electron energy loss spectroscopes. For accurate measurements of the energy distribution, this study presents a novel retarding field energy analyzer (RFEA) with the feature of an additional integrated pre-lens, which enables an adjustment of beam trajectory into the analyzer. The advantages of this analyzer are its compact size and simple electrode configuration. According to trajectory simulation theories, the optimum condition arises when the incident electron beam inside the RFEA is focused on the center of a retarding electrode. Comparing I–V curves depending on whether the pre-lens working or not, it is confirmed that the use of the pre-lens dramatically improves the energy resolution and efficiency of the signal acquisition process. The pre-lens RFEA was applied to characterize a Schottky electron gun under various temperatures and extraction voltages as operational conditions. When the tip temperature was increased by 50 K, we were able to measure an energy distribution broadening of 13.8 meV with the proposed pre-lens RFEA. The relative standard deviation of energy distribution was 0.7% for each working condition.

Atomically sharpened tips have attracted much interest in the imaging and manufacturing fields due to their high spatial resolutions. Typically, tungsten (W) is mainly used as the material of such a tip, but when the W tip is used in an oxygen environment, a limit is revealed due to corrosiveness stemming from a reaction with the oxygen gas. To solve this problem, methods of depositing a metal on W that does not react with oxygen have been studied. In this study, we introduce a method of depositing iridium (Ir) directly onto an insulating layer without an additional pretreatment to remove the insulating layer remaining on the W surface, forming an Ir-nanopyramid structure at the apex of the W tip by field evaporation and faceting. Field ion microscopy and atom probe tomography were used to analyze the crystal structure and composition at the apex during the faceting process, and the overall tip shape change after faceting was compared and analyzed with transmission electron microscopy. The proposed method does not have a tip heating step when creating an atomically sharp tip such that it can be made easily with a simpler equipment configuration than in the existing method.

The development of new amine solvents without the major drawbacks of conventional amines is crucial to industrial applications of CO2 capture. This paper presents a water-lean CO2 capture solvent having a low regeneration energy and low degradation. The water-lean solvent, K2Sol, is a sterically hindered diamine; because of the hindered amine site, K2Sol easily forms bicarbonate, resulting in a high absorption capacity. The minimum solvent regeneration energy is obtained using Gaussian process Bayesian optimization (GPBO) and bench-scale pilot plant experiments. GPBO finds the optimal solution using the input and output relationship of experiments; thus, expensive first-principle model construction can be avoided. According to the pilot plant experiment, the optimal regeneration energies of monoethanolamine (MEA) and K2Sol are 4.3 and 2.8 GJ/t CO2, respectively, indicating that K2Sol requires only 65% of the regeneration energy of MEA. Fewer than 30 experiments are required to find the optimal pilot plant operation for both the MEA and K2Sol experiments. We also describe the superior properties of K2Sol in terms of the CO2 loading, cyclic capacity, regeneration temperature, and degradation.

A retarding field energy analyzer (RFEA) for measuring the energy distribution of charged particles offers the advantages of a simple structure and suitability for simultaneous observations of beam patterns in two dimensions. In this study, lens-based RFEAs without a grid electrode were theoretically investigated with regard to the geometry and lens condition to achieve high performance. The simulation results show that the proposed RFEA can achieve a resolution of 2.6 meV at an energy level of 500 eV. In addition, performance, which is the ratio of the resolution to the beam energy, reached 5.2 × 10 − 6 . These results indicate that the RFEA designed in this study is capable of high-performance outcomes. The findings here demonstrate that the most important factors when attempting to realize a high-resolution RFEA design are to reduce the sagging effect of the electron beam through the focusing lens and ensure that V″(z) in the retarding electrode is close to zero. The design of the lens-based RFEAs is described in detail.

SO2 absorption and desorption behaviors were investigated in aqueous solutions of diamine-derived molten salts with a tertiary amine group on the cation and a chloride anion, including butyl-(2-dimethylaminoethyl)-dimethylammonium chloride ([BTMEDA]Cl, pKb=8.2), 1-butyl-1,4-dimethylpiperazinium chloride ([BDMP]Cl, pKb=9.8), and 1-butyl-4-aza-1-azoniabicyclo[2,2,2]octane chloride ([BDABCO]Cl, pKb=11.1). The SO2 absorption and desorption performance of the molten salt were greatly affected by the basicity of the molten salt. Spectroscopic, X-ray crystallographic, and computational results for the interactions of SO2 with molten salts suggest that two types of SO2-containg species could be generated depending on the basicity of the unquaternized amino group: a dicationic species comprising two different anions, HSO3(-) and Cl(-), and a monocationic species bearing Cl(-) interacting with neutral H2SO3.