Search

The objective of this study was to evaluate bone formation in rat calvarial defects after surgical implantation of block or particulated biphasic calcium phosphate (BCP) lyophilized with Escherichia coli-derived recombinant human bone morphogenetic protein 2 (ErhBMP-2). Critical-size calvarial osteotomy defects were created in 5 groups of Sprague-Dawley rats. Each group received one of the following: 1) sham surgery control; 2) biphasic calcium phosphate particles (CPP); 3) biphasic calcium phosphate block (CPB); 4) ErhBMP-2-coated CPP; or 5) ErhBMP-2-coated CPB. ErhBMP was coated on BCP by a stepwise lyophilizing protocol. The new bone formation was significantly greater in ErhBMP-2-treated groups compared with the untreated group. In particular, the ErhBMP-2/CPB group showed stability of augmented areas during the period of healing, due to relevant space-providing capacity. Thus, it can be concluded that CPP and CPB lyophilized with ErhBMP-2 enhance the formation of new bone, and CPB appears to be a suitable carrier for ErhBMP-2 in which a 3-dimensional structural integrity is an important consideration factor. [ABSTRACT FROM AUTHOR]

Objective: To investigate the early impact of plaque accumulation in a buccal dehiscence defect on peri-implant marginal bone resorption., Materials and Methods: In six male Mongrel dogs, four dental implants were placed in the posterior maxilla on both sides (two implants per side). Based on the group allocation, each implant was randomly assigned to one of the following four groups to decide whether buccal dehiscence defect was prepared and whether silk ligation was applied at 8 weeks post-implant placement for peri-implantitis induction: UC (no defect without ligation); UD (defect without ligation); LC (no defect with ligation); and LD (defect with ligation) groups. Eight weeks after disease induction, the outcomes from radiographic and histologic analyses were statistically analyzed (p < .05)., Results: Based on radiographs, the exposed area of implant threads was smallest in group UC (p < .0083). Based on histology, both the distances from the implant platform to the first bone-to-implant contact point and to the bone crest were significantly longer in the LD group (p < .0083). In the UD group, some spontaneous bone fill occurred from the base of the defect at 8 weeks after implant placement. The apical extension of inflammatory cell infiltrate was significantly more prominent in the LD and LC groups compared to the UC group (p < .0083)., Conclusion: Plaque accumulated on the exposed implant surface had a negative impact on maintaining the peri-implant marginal bone level, especially when there was a dehiscence defect around the implant., (© 2024 The Author(s). Clinical Oral Implants Research published by John Wiley & Sons Ltd.)

Background: Toothbrushing is the most commonly used method to physically remove dental plaque. However, there are many areas of the mouth that are difficult to reach with a toothbrush. The type of toothbrush is a critical factor influencing the effectiveness of oral care. The purpose of the study was to evaluate a toothbrush with a thin head, slender-neck and super-tapered bristles to target hard-to-reach areas in the oral cavity for reducing dental plaque and gingivitis., Methods: This crossover study included 58 adults aged 20 years and older. All participants were randomly assigned to use test and control toothbrushes (the latter had a normal head and round bristles) for two 4-week phases. Participants brushed their teeth twice daily in their habitual manner. At the start and end of each phase the Silness-Lӧe plaque index (PI), Lӧe -Silness gingival index (GI) and bleeding-on-probing index (BOP) were assessed and performed plaque fluorescence tests using quantitative light-induced fluorescence technology., Results: After using the test toothbrush, PI, GI and BOP decreased by 25%, 30% and 48%, respectively (P < 0.05). For the rearmost molars, PI, GI and BOP decreased by 18%, 26% and 47%, respectively (P < 0.05). For the implants, GI and BOP decreased by 31% and 57%, respectively (P < 0.05). The plaque fluorescence tests indicated that after using the test toothbrush, the dental plaque area for the anterior teeth and the simple plaque score for the rearmost molars decreased by 25% (P < 0.05) and 14% (P = 0.527), respectively., Conclusions: The test toothbrush was markedly better than the control toothbrush at reducing dental plaque and gingivitis. In particular, the test toothbrush produced an excellent reduction in dental plaque and gingivitis for the rearmost molars and the implants., Trial Registration: KCT0009669, retrospectively registered 02/08/2024., (© 2024. The Author(s).)

Objective: To histomorphometrically determine the effects of hard- and/or soft-tissue augmentation by applying the early implant placement protocol., Materials and Methods: The distal roots of the maxillary second and third premolars were extracted in 10 mongrel dogs. After 1 month, early implant placement was performed in the distal roots, resulting in buccal dehiscence defects. Four treatments were then randomly applied: (1) guided bone regeneration (GBR), (2) connective tissue grafting (CTG), (3) simultaneous GBR and CTG (GBR + CTG) and (4) no further treatment (control). Healing abutments were connected to all implants to allow non-submerged healing. At 4 and 16 weeks, tissue sections were harvested and histomorphometric analyses were performed., Results: Group GBR presented the largest total tissue thickness at 4 weeks, but underwent a greater remodelling compared with the other groups between 4 and 16 weeks. At 16 weeks, the overall tissue thickness was largest in group GBR + CTG. This group was also the most favourable in terms of the level of the margo mucosae and the presence of mineralized tissue at the coronal level. Group CTG demonstrated a stable tissue thickness over time, with a larger thickness at 16 weeks compared with group GBR., Conclusion: Simultaneous CTG and GBR resulted in the most-favourable tissue thickness when applying the early implant placement protocol., (© 2024 The Author(s). Clinical Oral Implants Research published by John Wiley & Sons Ltd.)

Aim: To evaluate the efficacy of guided bone regeneration (GBR) for the treatment of peri-implant dehiscence defects using a synthetic bone substitute (SBS) or a deproteinized bovine bone mineral (DBBM) as a bone substitute., Methods: Patients with expected dehiscence defects following implant placement were randomized to use either SBS or DBBM together with a bioabsorbable collagen membrane over dehiscenced implant surfaces aimed for GBR. The changes in the bone defect size were measured before the GBR procedure and 6 months after implant placement at the re-entry surgery. Secondary outcomes included peri-implant health outcomes, implant cumulative survival rates, bone level changes, and patient-reported outcomes (PROMs) at prosthesis delivery and 1-year follow-up., Results: Of the 49 included patients, 24 were treated with SBS and 25 with DBBM. In the SBS group, the defect height (DH) at implant insertion was 5.1 ± 2.6 mm and was reduced at re-entry to 1.3 ± 2.0 mm (74.5%). In the DBBM group, the respective changes in DH were 4.1 ± 1.7 mm and 1.5 ± 1.9 mm (63.4%). These differences were not statistically significant (p = 0.216). The complete defect resolution rate was also comparable in both groups without statistical difference (62.5% of patients (15/24) vs. 44% of patients (11/25)). Overall, the marginal bone levels remained stable during the 1-year follow-up in both groups., Conclusion: The SBS is noninferior to DBBM for simultaneous GBR to implant placement at implant sites with buccal dehiscences in terms of defect resolution and evaluated secondary outcomes (KCT0008393 - this clinical trial was not registered before participant recruitment and randomization)., (© 2024 The Author(s). Clinical Implant Dentistry and Related Research published by Wiley Periodicals LLC.)

Objectives: To evaluate clinical, clinician- and patient-reported outcomes (PROs) of two adjacent single posterior implants immediately loaded with definitive single crowns up to 1 year. Ten patients in need of two adjacent posterior single implants were included. All implants were placed applying a fully digital workflow. Definitive screw-retained single zirconia crowns were delivered within 72 h after implant placement. Clinical parameters, patient- and clinician-reported outcomes were assessed up to 1 year of follow-up., Clinical Considerations: Clinical outcomes remained stable, with no implant failures or technical and biological complications throughout the observation period. Patient satisfaction was very high at baseline (crown delivery) and remained consistently high at 6 and 12 months of follow-up. Crown insertion 3 days after implant placement was rated as an easy procedure by clinicians., Conclusions: Two adjacent single implants with immediate definitive restorations (<72 h) in the posterior region appear to be a viable and easy treatment option to shorten the overall treatment time and potentially enhancing patient satisfaction. However, randomized controlled trials are needed to confirm the advantages of this treatment protocol over a delayed loading approach., Clinical Significance: In selected cases, immediate implant loading with definitive restorations in the posterior region appears a valuable and straightforward option to shorten the overall treatment time., (© 2024 The Authors. Journal of Esthetic and Restorative Dentistry published by Wiley Periodicals LLC.)

Aims: The aim of this experimental in vivo pilot study was to evaluate the effect of the local delivery of pamidronate within a collagen membrane on the changes in the buccal soft and hard tissue dimensions at the time of immediate implant placement and whether this effect was influenced by the placement of bone substitutes., Methods: In six beagle dogs, the distal roots of the third and fourth premolars were extracted, and immediate implants were placed. Treatment groups were randomly allocated to each socket: (i) covering the buccal bone with pamidronate-soaked collagen membrane (BP group), (ii) filling the gap defect with synthetic bone substitute (BS group), (iii) filling the gap defect with synthetic bone substitute and covering the buccal bone with pamidronate soaked collagen membrane (BP/BS group), (iv) no treatment (control group). Intraoral scanning was performed immediately after the surgery and at 20 weeks. Histomorphometric and micro-computed tomography (CT) outcomes were evaluated at 20 weeks., Results: The micro CT analysis demonstrated that the BP group showed no apparent difference in vertical bone level with residual mesial root area, while control group showed significant buccal bone resorption at the implant site. The histomorphometric analysis demonstrated that the vertical bone level of buccal plate was significantly differed between the BP and control group (0.34 ± 0.93 and 1.27 ± 0.56 mm, respectively; p = .041). There was no statistically significant difference in the horizontal ridge width (HRW 1, 2, 3) among the groups. Also, the thickness, height and buccal contours of the soft tissue did not reveal significant changes among the groups., Conclusion: The local delivery of pamidronate to the outer surface of the buccal wall at the time of immediate implant placement effectively limits buccal bone resorption. The results from the present investigation should be interpreted with caution, as well as its clinical translatability. Further investigation is needed to understand the pamidronate binding and releasing kinetic, as well as the ideal carrier of this drug for its topical application., (© 2024 The Author(s). Journal of Periodontal Research published by John Wiley & Sons Ltd.)

Objective: To compare fully guided flapless implant surgery using a light-cured surgical guide (FG group) with partially guided open flap surgery (PG group) in the posterior maxilla when performing simultaneous sinus floor elevation in terms of the accuracy, time requirements, and patient/clinician-reported outcomes (PROMs and CROMs)., Materials and Methods: In this study, 56 tissue-level implants were placed with crestal sinus floor elevation in 56 patients at single-tooth sites, with 28 implants allocated to the PG group and 28 to the FG group. The deviations of the placed implants from the virtually planned positions were measured at the implant platform and apex and for the angular deviation. The presurgical preparation time and the duration of surgery were measured. PROMs and CROMs were made by administering questionnaires at multiple time points., Results: Horizontal deviations at the platform and apex and the angular deviation were significantly smaller in the FG group than the PG group (p < .05). Presurgical preparation and surgery times were significantly shorter in the FG group (p < .001). Patient satisfaction and willingness to receive repeat treatment were significantly better in the FG group than in the PG group (p < .005 and .025, respectively). Clinicians were more satisfied in the FG group than the PG group (p < .05)., Conclusion: When placing an implant with sinus floor elevation, the flapless approach using a fully guided surgical system can be more accurate, faster, and increase the satisfaction of both the clinician and patient compared to the partially guided surgery., (© 2024 The Author(s). Clinical Oral Implants Research published by John Wiley & Sons Ltd.)

The aim of this study was to determine the effect of membrane fixation and combinations of bone substitute materials and barrier membranes on horizontal bone regeneration in peri-implant defects. Eight mongrel dogs underwent chronic buccal peri-implant dehiscence defects creation and were randomized into 4 groups: (a) deproteinized bovine bone mineral 1 (DBBM1) with a native collagen membrane (CM) (BB group, positive control group), (b) DBBM1 with native CM and 2 fixation pins (BBP group), (c) DBBM2 with a cross-linked CM (XC group), and (d) DBBM2 with cross-linked CM and 2 fixation pins (XCP group). Following 16 weeks of healing, tissues were radiographically and histomorphometrically analyzed. The total augmented area was significantly larger in the BBP, XC, and XCP groups compared to the BB group (4.27 ± 3.21, 7.17 ± 7.23, and 6.91 ± 5.45 mm 2 versus 1.35 ± 1.28 mm 2 , respectively; P = 0.022). No significant difference for the augmented tissue thickness was observed among the 4 groups. The augmented tissue thickness measured at 3 mm below the implant shoulder was higher in BBP, XC, and XCP than that in BB (2.43 ± 1.53, 2.62 ± 1.80, and 3.18 ± 1.96 mm versus 0.80 ± 0.90 mm, respectively), trending toward significance ( P = 0.052). DBBM2 and a cross-linked CM were significantly more favorable for horizontal bone regeneration compared to DBBM1 and a native CM. However, when DBBM1 and a native CM were secured with fixation pins, outcomes were similar. The addition of pins did not lead to more favorable outcomes when a cross-linked CM was used., (Copyright © 2024 Jeong-Won Paik et al.)

Aim: To determine the effects of implant timing and type of soft-tissue grafting on histological and histomorphometric outcomes in a preclinical model., Materials and Methods: Four implant placement protocols were randomly applied at the mesial root sites of the third and fourth mandibular premolars in 10 mongrel dogs: immediate placement (group IP), early placement (group EP), delayed placement with/without alveolar ridge preservation (groups ARP and DP, respectively). A connective-tissue graft (CTG) or porcine-derived volume-stable collagen matrix (VCMX) was applied to enhance the ridge profile (simultaneously with implant placement in group IP and staged for others), resulting in five sites for each combination. All dogs were sacrificed 3 months after soft-tissue grafting. Histological and histomorphometric analyses were performed, and the data were analysed descriptively., Results: CTG and VCMX were difficult to differentiate from the augmented area. The median total tissue thickness on the buccal aspect of the implant was largest in group IP/CTG (between 2.78 and 3.87 mm). The soft-tissue thickness was generally favourable with CTG at all implant placement timings. Within the DP groups, CTG yielded statistically significantly larger total and soft-tissue thickness than VCMX (p < .05). Among the groups with VCMX, group EP/VCMX showed the largest soft-tissue thickness at apical levels to the implant shoulder., Conclusions: CTG generally led to greater tissue thickness than VCMX., (© 2024 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

Purpose: Placing dental implants in areas with low bone density or in conditions where bone healing is suppressed is challenging for clinicians. An experiment using a rodent model was performed with the aim of determining the efficacy of host modulation by increasing the systemic level of cholesterol sulfate (CS) using Irosustat in the context of the bone healing process around dental implants., Methods: In 16 ovariectomised female Sprague-Dawley rats, 2 implant fixtures were placed in the tibial bones (1 fixture on each side). At 1 week after surgery, the high-CS group (n=8) received Irosustat-mixed feed, while the control group (n=8) was fed conventionally. Block specimens were obtained at 5 weeks post-surgery for histologic analysis and the data were evaluated statistically ( P <0.05)., Results: Unlike the high-CS group, half of the specimens in the control group demonstrated severe bone resorption along with a periosteal reaction in the cortex. The mean percentages of bone-to-implant contact (21.5%) and bone density (28.1%) near the implant surface were significantly higher in the high-CS group than in the control group ( P <0.05), as was the number of Haversian canals (by 5.3)., Conclusions: Host modulation by increasing the CS level may enhance the osseointegration of dental implants placed under conditions of impaired bone healing., Competing Interests: No potential conflict of interest relevant to this article was reported., (Copyright © 2024. Korean Academy of Periodontology.)

Aim: To test whether early implant placement into the extraction socket containing an uncalcified provisional matrix leads to successful osseointegration and stable marginal bone levels., Materials and Methods: In six mongrel dogs, the mandibular molars were extracted. Three weeks later, early implant placement was performed according to three experimental protocols: (i) flapless implant placement with preservation of the provisional matrix; (ii) flap elevation, socket debridement and implant placement; and (iii) flap elevation, socket debridement, implant placement and guided bone regeneration (GBR). One untreated extraction socket served as a control group. Data analyses were based on histologic slides 3 months after implant placement., Results: There were no differences in bone-to-implant contact between the three experimental groups (66.97%, 58.89% and 60.89%, respectively) (inter-group comparison p = .42). Marginal bone levels, first bone-to-implant contact as well as the thickness of the connective tissue did not reveal any significant differences between the groups (p = .85, .60 and .65, respectively)., Conclusions: Flapless early implant placement into posterior extraction sockets was as effective as an open flap approach in conjunction with GBR. Mineralization of the socket seems to occur irrespective of the presence of dental implants or biomaterials., (© 2024 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

This study aimed to investigate the dimensional stability and quality of the alveolar ridge augmented using a synthetic bone block (SBB) at damaged extraction sockets. Four participants were included, and socket augmentation was performed using SBB and a collagen membrane. Intraoral and CBCT scans were performed before extraction (baseline), immediately postoperative (IP), and at 6 months postoperative (6M). At 6M, a trephine biopsy sample was obtained during implant placement, and the sample was observed using synchrotron. Soft tissue profile changes were assessed using profilometric analysis of the intraoral scan data, while dimensional changes in hard tissue were evaluated based on CBCT measurements. Bone quality was analyzed using synchrotron imaging. There were minimal changes in the soft tissue profile between baseline and IP, baseline and 6M, and IP and 6M (0.11 ± 1.08 mm3, 0.02 ± 0.8 mm3, and -0.65 ± 0.82 mm3, respectively). Horizontal bone width was measured at 1-mm increments from the augmented bone crest to 5 mm apically and revealed only a slight reduction (< 1 mm) at all levels between IP and 6M. The augmented bone height was well maintained from IP until 6M (-0.21 ± 0.53 mm). Synchrotron analysis revealed low to moderate bone quality after 6M (percentage of new bone: 16.49% ± 4.91%). Socket augmentation using SBB appears to be a viable technique for regenerating damaged extraction sockets, with the augmented ridge dimensions maintained up to 6M. Further long-term randomized clinical trials are needed.

Aim: To histomorphometrically assess three treatment modalities for gaining keratinized tissue (KT) at teeth and at dental implants., Materials and Methods: In five dogs, the distal roots of the mandibular second, third and fourth premolars were extracted. Dental implants were placed at the distal root areas 2 months later. After another 2 months, KT augmentation was performed at both distal (implants) and at mesial root (teeth) areas in the presence (wKT groups) or absence (w/oKT groups) of a KT band at the mucosal/gingival level. Three treatment modalities were applied randomly: apically positioned flap only (APF), free gingival grafts (FGGs) and xenogeneic collagen matrices (XCMs). A combination of the above produced six groups. Two months later, tissue sections were harvested and analysed histomorphometrically., Results: The median KT height and length were greatest at implants with FGG in both wKT (3.7 and 5.1 mm, respectively) and w/oKT groups (3.7 and 4.6 mm), and at teeth with FGG in wKT groups (3.7 and 6.1 mm) and with APF in the w/oKT groups (3.9 and 4.4 mm). The XCM and APF produced more favourable results at teeth than at implants., Conclusions: FGG was advantageous in gaining KT, especially at implants., (© 2024 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

This retrospective study aimed to determine risk factors associated with post-operative bleeding after dentoalveolar surgery in patients taking anticoagulants. Patients taking anticoagulants who were planned to undergo periodontal flap operation, tooth extraction or implant surgery were included. Patients were divided into two subgroups according to the maintenance of anticoagulants following medical consultation: (1) maintenance group and (2) discontinuation group. The analysed patient-related factors included systemic diseases, maintenance of anticoagulants and types of anticoagulant. Intra- and post-operative treatment-related factors, haemostatic methods and post-operative bleeding were collected for statistical analyses. There were 35 post-operative bleeding complications (6.5%) in the 537 included patients: 21 (8.6%) in maintenance group and 14 (4.8%) in discontinuation group. The type of anticoagulant (p = 0.037), tooth extraction combined with bone grafting (p = 0.016) and type of implant surgery (p = 0.032) were significantly related to the post-operative bleeding rate. In the maintenance group, atrial fibrillation [odds ratio (OR) = 6.051] and vitamin K inhibitors (OR = 3.679) were associated with a significantly higher bleeding risk. From this result, it can be inferred that the decision to continue anticoagulants should be made carefully based on the types of anticoagulant and the characteristics of dentoalveolar surgeries performed: extraction with bone grafting, multiple implantations and involvement of maxillary arch., (© 2024. The Author(s).)

Objective: To evaluate the effect of a self-retaining block-type bone substitute (srBB) on the dimensional stability of the horizontal ridge width at the coronal level in a buccal dehiscence model., Materials and Methods: Four box-shaped bone defects with a buccal dehiscence were surgically prepared in the partially edentulous mandible (n = 6). Experimental biomaterials were randomly assigned to each site: (1) Control group: no treatment, (2) particle-type bone substitute (PBS) group, (3) collagenated soft block bone substitute (csBB) group, and (4) self-retaining synthetic block bone (srBB) group. In all grafted groups, a collagen membrane covered the biomaterials. At 16 weeks, clinical, histological, and radiographic analyses were performed., Results: Three of the six blocks in the srBB group became exposed and fell out during the first week after surgery. Therefore, the remaining three specimens were renamed RsrBB group. The RsrBB group showed an increase horizontal ridge compared to the pristine bone width at 2-4 mm below the CEJ, while the other groups showed resorption (augmented width at 2 mm below: 4.2, 42.4, 36.2, and 110.1% in the control, PBS, csBB, and RsrBB groups, respectively). The mineralized bone area was largest in the RsrBB group (4.74, 3.44, 5.67, and 7.77 mm 2 in the control, PBS, csBB, and RsrBB groups, respectively.)., Conclusions: The srBB group demonstrated the highest volume stability at the coronal level. These findings would potentially suggest that self-retaining block bone substitute might be a good candidate for alveolar ridge preservation., (© 2023 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

Aim: To investigate whether transmucosal healing is as effective as submerged healing in terms of buccal bone regeneration when guided bone regeneration (GBR) is performed simultaneously with implant placement., Materials and Methods: In six dogs, buccal dehiscence defects were created in the edentulous mandibular ridge, sized 5 × 5 × 3 mm (length × height × depth). In each defect, a bone-level implant was placed, and four experimental groups were randomly assigned as follows: (i) transmucosal healing with GBR (T-GBR), (ii) transmucosal healing without GBR (T-control), (iii) submerged healing with GBR (S-GBR) and (iv) submerged healing without GBR (S-control). Data analyses were based on histological slides 5 months after implant placement., Results: The T-GBR group showed significant differences compared to the control groups regarding defect height resolution, buccal bone thickness and mineralized tissue area (p < .05), but showed no significant differences when compared with the S-GBR group (p > .05)., Conclusions: The mode of healing (transmucosal vs. submerged) does not influence bone regeneration at implant sites. The clinician may therefore choose the approach based on further clinical and patient-specific parameters., (© 2023 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

Purpose: The present experiment aimed to evaluate the placement accuracy of fully guided implant surgery using a mucosa-supported surgical guide when the protocol of osteotomy and installation was modified (MP) compared to when the protocol was sequentially and conventionally carried out (CP)., Materials and Methods: For 24 mandibular dentiform models, 12 dentists (6 experts and 6 beginners) performed fully guided implant placements two times at the right first and second molar sites using a mucosa-supported surgical guide, once by the CP (CP group) and at the other time by the MP (MP group). The presurgical and postsurgical stereolithographic images were superimposed, and the deviations between the virtually planned and actually placed implant positions and the procedure time were compared statistically ( P < .05)., Results: The accuracies were similar in the CP and MP groups. In the CP group, the mean platform and apex deviations at the second molar site for the beginners were +0.75 mm and +1.14 mm, respectively, which were significantly larger than those for the experts ( P < .05). In the MP group, only the mean vertical deviation at the second molar site for the beginners (+0.53 mm) was significantly larger than that for the experts ( P < .05). The procedure time was significantly longer for the MP group (+94.0 sec) than for the CP group ( P < .05)., Conclusion: In fully guided implant surgery using a mucosa-supported guide, the MP may improve the placement accuracy when compared to the CP, especially at sites farther from the most-posterior natural tooth., (© 2024 The Korean Academy of Prosthodontics.)

Purpose: This study aimed to propose a revision of the evaluation objectives of the Korean Dentist Clinical Skill Test by analyzing the opinions of those involved in the examination after a review of those objectives., Methods: The clinical skill test objectives were reviewed based on the national-level dental practitioner competencies, dental school educational competencies, and the third dental practitioner job analysis. Current and former examinees were surveyed about their perceptions of the evaluation objectives. The validity of 22 evaluation objectives and overlapping perceptions based on area of specialty were surveyed on a 5-point Likert scale by professors who participated in the clinical skill test and dental school faculty members. Additionally, focus group interviews were conducted with experts on the examination., Results: It was necessary to consider including competency assessments for “emergency rescue skills” and “planning and performing prosthetic treatment.” There were no significant differences between current and former examinees in their perceptions of the clinical skill test’s objectives. The professors who participated in the examination and dental school faculty members recognized that most of the objectives were valid. However, some responses stated that “oromaxillofacial cranial nerve examination,” “temporomandibular disorder palpation test,” and “space management for primary and mixed dentition” were unfeasible evaluation objectives and overlapped with dental specialty areas., Conclusion: When revising the Korean Dentist Clinical Skill Test’s objectives, it is advisable to consider incorporating competency assessments related to “emergency rescue skills” and “planning and performing prosthetic treatment.”

Purpose: The aim of this study was to determine 1) the bone-regenerative effect of porcine bone block materials with or without collagen matrix incorporation, 2) the effect of a collagen barrier, and 3) the effect of adding recombinant human bone morphogenetic protein-2 (rhBMP-2) to the experimental groups., Methods: Four treatment modalities were applied to rabbit calvaria: 1) deproteinized bovine bone mineral blocks (DBBM), 2) porcine bone blocks with collagen matrix incorporation (PBC), 3) porcine bone blocks alone without collagen matrix incorporation (PB), and 4) PBC blocks covered by a collagen membrane (PBC+M). The experiments were repeated with the addition of rhBMP-2. The animals were sacrificed after either 2 or 12 weeks of healing. Micro-computed tomography (micro-CT), histologic, and histomorphometric analyses were performed., Results: Micro-CT indicated adequate volume stability in all block materials. Histologically, the addition of rhBMP-2 increased the amount of newly formed bone (NB) in all the blocks. At 2 weeks, minimal differences were noted among the NB of groups with or without rhBMP-2. At 12 weeks, the PBC+M group with rhBMP-2 presented the greatest NB ( P <0.05 vs. the DBBM group with rhBMP-2), and the PBC and PB groups had greater NB than the DBBM group ( P >0.05 without rhBMP-2, P <0.05 with rhBMP-2)., Conclusions: The addition of rhBMP-2 enhanced NB formation in vertical augmentation using bone blocks, and a collagen barrier may augment the effect of rhBMP-2., Competing Interests: No potential conflict of interest relevant to this article was reported., (Copyright © 2023. Korean Academy of Periodontology.)

Guided bone regeneration aided by the application of occlusive membranes is a promising therapy for diverse inflammatory periodontal diseases. Symbiosis, homeostasis between the host microbiome and cells, occurs in the oral environment under normal, but not pathologic, conditions. Here, we develop a symbiotically integrating occlusive membrane by mimicking the tooth enamel growth or multiple nucleation biomineralization processes. We perform human saliva and in vivo canine experiments to confirm that the symbiotically integrating occlusive membrane induces a symbiotic healing environment. Moreover, we show that the membrane exhibits tractability and enzymatic stability, maintaining the healing space during the entire guided bone regeneration therapy period. We apply the symbiotically integrating occlusive membrane to treat inflammatory-challenged cases in vivo, namely, the open and closed healing of canine premolars with severe periodontitis. We find that the membrane promotes symbiosis, prevents negative inflammatory responses, and improves cellular integration. Finally, we show that guided bone regeneration therapy with the symbiotically integrating occlusive membrane achieves fast healing of gingival soft tissue and alveolar bone., (© 2023. The Author(s).)

Purpose: Non-crosslinked and crosslinked collagen membranes are known to exhibit distinct degradation characteristics, resulting in contrasting orientations of the adjacent tissues and different biological processes. The aim of this study was to conduct a histomorphometric assessment of non-crosslinked and crosslinked collagen membranes regarding neovascularization, tissue integration, tissue encapsulation, and biodegradation., Methods: Guided bone regeneration was performed using either a non-crosslinked (BG) or a crosslinked collagen membrane (CM) in 15 beagle dogs, which were euthanized at 4, 8, and 16 weeks (n=5 each) for histomorphometric analysis. The samples were assessed regarding neovascularization, tissue integration, encapsulation, the remaining membrane area, and pseudoperiosteum formation. The BG and CM groups were compared at different time periods using nonparametric statistical methods., Results: The remaining membrane area of CM was significantly greater than that of BG at 16 weeks; however, there were no significant differences at 4 and 8 weeks. Conversely, the neovascularization score for CM was significantly less than that for BG at 16 weeks. BG exhibited significantly greater tissue integration and encapsulation scores than CM at all time periods, apart from encapsulation at 16 weeks. Pseudoperiosteum formation was observed in the BG group at 16 weeks., Conclusions: Although BG membranes were more rapidly biodegraded than CM membranes, they were gradually replaced by connective tissue with complete integration and maturation of the surrounding tissues to form dense periosteum-like connective tissue. Further studies need to be performed to validate the barrier effect of the pseudoperiosteum., Competing Interests: No potential conflict of interest relevant to this article was reported., (Copyright © 2023. Korean Academy of Periodontology.)

Background: Lidocaine has been widely used as a short-acting local anesthetic agent to reduce the pain caused by needle insertion. Dissolving microneedles (DMNs), which are minimally invasive, can effectively deliver drugs by overcoming the oral mucosal barrier and relieving patient discomfort., Methods: Lidocaine solution prepared by mixing lidocaine-HCl and hyaluronic acid was used to fabricate oral lidocaine HCl-encapsulated DMNs (oral Li-DMNs) via centrifugal lithography. The dissolution, penetration ability, and local transmucosal drug delivery of oral Li-DMNs into the oral mucosa were evaluated in porcine jaws. Pharmacokinetic analysis and safety assessment were performed using rabbits., Results: The insertion depth of the oral Li-DMNs satisfies the safety standard. The oral Li-DMNs were completely dissolved after 3 min of application. The local transmucosal drug delivery, pharmacokinetic, and safety evaluations showed that the oral Li-DMNs can obtain a local anesthesia effect at a relatively lower dose, and there was no oral mucosal irritation in rabbits., Conclusions: A novel and safe oral Li-DMNs have potential applications in large animals and clinical trials and would possibly enter the anesthesia market.

Aim: To compare the peri-implant soft-tissue dimensional changes following guided bone regeneration between particulate (particle group) and collagenated soft-block-type (block group) biphasic calcium phosphate (BCP)., Materials and Methods: This study investigated 35 subjects: 18 in the particle group and 17 in the block group. Cone-beam computed tomography obtained at 6 months post surgery and optical impressions taken periodically (before surgery, 6 months post surgery, and 1 year post surgery) were superimposed. The ridge contour changes over time and the peri-implant mucosal thicknesses were measured diagonally and horizontally, and analysed statistically., Results: The increases in diagonal (1.12 ± 0.78 mm) and horizontal (2.79 ± 1.90 mm) ridge contour of the block group were significantly higher than those in the particle group during the first 6 months (p < .05); however, the contour hardly changed thereafter (diagonal: 0.07 ± 0.75 mm; horizontal: -0.34 ± 1.26 mm), resulting in the 1-year contour changes similar between the two groups. Regardless of the type of BCP, the ridge contour increased significantly over 1 year when the dehiscence defect had a contained configuration (p < .05)., Conclusions: The increase in soft-tissue dimensions for 1 year was similar between the two groups. The mucosal contour increase was larger when the surgery was conducted in a more contained defect, and this was not influenced by the type of BCP., (© 2022 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

Purpose: The aim of this study was to investigate the association between the changes in masticatory function and cognitive impairment by analyzing longitudinal data of older Korean patients., Materials and Methods: Patients aged over 60 years with dental records between 2005 to 2010 (baseline; T1) and 2014 to 2020 (follow-up; T2) were selected in a single medical center. Based on the dementia diagnosis after T2, the cohort was classified into two groups, the dementia group (n=122) and the control group (n=366). Changes in masticatory function were calculated using the total functional tooth unit (T-FTU) in both groups. The incidence of tooth extraction (%) and the subsequent rehabilitation during the observation period were also evaluated., Results: In the dementia group, T-FTU significantly decreased from T1 to T2 (9.81±2.78 to 9.11±3.16, respectively, p =0.008), while no significant change was observed in the control group. During the mean observation period of 9 years, significantly more teeth were extracted and neglected to be prosthetically restored in the dementia group than in the control group. Regression analysis revealed that the number of missing teeth neglected [odds ratio (OR)=1.195, 95% confidence interval (CI)=1.025-1.393, p =0.023] and previous alcohol consumption (OR=4.445, 95% CI=1.831-1.795, p =0.001) were the most significant risk factors of dementia., Conclusion: There might be a causative relationship between the neglected missing dentition and the onset of dementia., Competing Interests: The authors have no potential conflicts of interest to disclose., (© Copyright: Yonsei University College of Medicine 2022.)

Aim: To test whether soft-type block bone substitute used for guided bone regeneration (GBR) of peri-implant defects leads to a different dimension of the augmented hard tissue than particulate bone substitute., Materials and Methods: In 40 patients, 40 two-piece dental implants were placed >2 months after tooth extraction. Following random allocation, 20 peri-implant bone dehiscences were grafted with a soft-type block made of synthetic biphasic calcium phosphate (BCP) + collagen and 20 bone dehiscences with particulate BCP. All the sites were covered with a collagen membrane stabilized with titanium pins. Immediately after wound closure and after 6 months, the horizontal dimension (HD) of the augmented hard tissue was measured at the level of implant shoulder using cone beam computed tomography. During re-entry at 6 months, the defect fill was clinically assessed., Results: At 6 months, the median HD measured 1.15 mm (mean: 1.31 mm) in the soft-block group and 0.93 mm (mean: 1.05 mm) in the particulate group (p = .6). At 6 months, 7.1% of contained defects and 61.9% of non-contained defects showed an incomplete vertical defect fill., Conclusions: Soft-type block of BCP + collagen used for GBR of peri-implant defects did not differ from particulate BCP regarding the dimension of the augmented hard tissue after 6 months of healing., (© 2022 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

Purpose: This study was conducted to assess the effect of hard and/or soft tissue grafting on immediate implants in a preclinical model., Methods: In 5 mongrel dogs, the distal roots of P2 and P3 were extracted from the maxilla (4 sites in each animal), and immediate implant placement was performed. Each site was randomly assigned to 1 of the following 4 groups: i) gap filling with guided bone regeneration (the GBR group), ii) subepithelial connective tissue grafting (the SCTG group), iii) GBR and SCTG (the GBR/SCTG group), and iv) no further treatment (control). Non-submerged healing was provided for 4 months. Histological and histomorphometric analyses were performed., Results: Peri-implant tissue height and thickness favored the SCTG group (height of peri-implant mucosa: 1.14 mm; tissue thickness at the implant shoulder and ±1 mm from the shoulder: 1.14 mm, 0.78 mm, and 1.57 mm, respectively; median value) over the other groups. Bone grafting was not effective at the level of the implant shoulder and on the coronal level of the shoulder. In addition, simultaneous soft and hard tissue augmentation (the GBR/SCTG group) led to a less favorable tissue contour compared to GBR or SCTG alone (height of peri-implant mucosa: 3.06 mm; thickness of peri-implant mucosa at the implant shoulder and ±1 mm from the shoulder: 0.72 mm, 0.3 mm, and 1.09 mm, respectively)., Conclusion: SCTG tended to have positive effects on the thickness and height of the peri-implant mucosa in immediate implant placement. However, simultaneous soft and hard tissue augmentation might not allow a satisfactory tissue contour in cases where the relationship between implant position and neighboring bone housing is unfavorable., Competing Interests: No potential conflict of interest relevant to this article was reported., (Copyright © 2022. Korean Academy of Periodontology.)

Aim: The aim of this study was to identify the additional effects of collagen membrane (CM) and of synthetic bone substitute (BS) on lateral bone augmentation of chronic peri-implant defect with titanium mesh (TM)., Materials and Methods: Atrophic alveolar ridge was induced in six canine mandibles, and 5 peri-implant defects were achieved in each hemi-mandible. Bone augmentation was attempted using the following randomly allocated modalities: (1) Control: no treatment, (2) TM only group: blood clot covered by TM, (3) TM+BS group: BS covered by TM, (4) TM+CM group: blood clot covered by TM and CM, and (5) TM+BS+CM group: BS covered by TM and CM. After 16 weeks of submerged healing, micro-CT and histomorphometric analyses were performed., Results: TM exposure occurred in one case in the TM only group, one case in the TM+CM group, and two cases in the TM+BS+CM group. Histologically, pseudo-periosteum was observed along the inner and outer surfaces of TM, and the directions of the collagen fiber within the pseudo-periosteum differed according to the additional use of CM. In general, the TM only group rendered higher values in vertical defect fill and dimension of the augmented hard tissue in comparison with the other treatment groups., Conclusions: Due to the small sample size, this pilot study remains inconclusive. Within the limitations of the study, the use of CM and/or BS did not appear to have an additional benefit on lateral bone augmentation of peri-implant defect with TM., (© 2022 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

Aim: To determine the effect of (1) implant placement timing and (2) the type of soft tissue graft in terms of ridge profile changes., Materials and Methods: Four implant treatment modalities were applied in the mesial root areas of the third and fourth mandibular premolars of 10 mongrel dogs alongside connective-tissue graft (CTG) and volume-stable cross-linked collagen matrix (VCMX): immediate, early, and delayed placement (DP), and DP following alveolar ridge preservation (ARP). All dogs were sacrificed 3 months after soft tissue augmentation. Standard Tessellation Language files from designated time points were analysed., Results: Compared with the pre-extraction situation, the median width of the ridge demontstrated a linear increase only in group ARP/CTG (0.07 mm at the 2-mm level), whereas all other groups showed a reduction (between -1.87 and -0.09 mm, p > .05). Groups ARP/CTG (0.17 mm) and DP/CTG (0.05 mm) exhibited a profilometric tissue gain in a set region of interest (p > .05). The net effect of CTG and VCMX ranged from 0.14 to 0.79 mm., Conclusions: Dimensional ridge changes varied between treatment protocols. ARP with CTG led to the smallest difference in ridge profile between the pre-extraction and the study end time point. Both CTG and VCMX enhanced the ridge contour., (© 2022 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

Aim: To assess the effect of Schneiderian membrane (SM) perforation on bone formation by applying a particulate deproteinized bovine bone mineral (PBBM)., Materials and Methods: Bilateral sinus augmentation was performed in eight rabbits. The same amount of PBBM was placed at a sinus where the SM was intentionally perforated for the perforation group (standardized to 3 mm diameter) and the other sinus with an intact SM that served as the intact group. At 12 weeks, all animals were euthanized for radiographic and histomorphometric analyses., Results: The area of the newly formed bone in the perforation group was significantly less than that in the intact group (18.7% and 25.5%, respectively, p = .028). The newly formed bone in the area close to the perforated SM was significantly less than that in the intact group (18.7% and 26.1%, respectively, p < .05). However, there was no significant difference in the total augmented area (p = .234) and the total augmented volume (p = .382) between the two groups., Conclusion: SM perforation had an adverse effect on new bone formation, predominantly close to the area of membrane perforation. However, no significant difference was found in the total augmented volume between the SM perforation and the intact groups., (© 2021 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

Objectives: To assess the osseointegration of calcium-coated (CS) and chemically modified, sandblasted, large-grit, acid-etched (MS) dental implants with a lack of primary mechanical stability., Materials and Methods: Eighteen implants in CS and MS groups each were loosely placed in the mandible of six mongrel dogs and allowed to heal for 2, 4 and 8 weeks. Implant stability quotient (ISQ) and implant stability test (IST) values recorded periodically and bone-to-implant contact (BIC) and the number of Haversian canals per 1 mm 2 measured histologically were statistically analysed (p < .05)., Results: All CS and MS implants placed survived. Compared with immediately after installation, ISQ and IST values in both groups increased significantly to over 76 at 2 weeks (p < .0083) and remained stable thereafter. BIC was significantly greater at 8 weeks (61.3 ± 13.6% in CS group; 57.6 ± 5.9% in MS group) compared to 2 and 4 weeks in both groups (p < .017). There were no significant intergroup differences in ISQ, IST or BIC at different time points. Significantly more Haversian canals were observed in group CS (6.2 ± 1.0/mm 2 ) compared with group MS at 4 weeks (3.7 ± 1.8 /mm 2 ; p < .05), while intergroup difference was not significant at 8 weeks., Conclusion: Both CS and MS implants inserted without primary stability obtained osseointegration within 2 weeks, and lamellar bone adjacent to the implants was first observed at 8 weeks. The formation of primary osteons was more active at 4 weeks in group CS than in group MS., (© 2021 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

Background: In immediately loaded implants within 72 h after the implant placement in the unilaterally and partially edentulous ridge, primary stability is considered critical, which can be influenced by the design of the implant fixture., Purpose: To determine the outcomes at 1 year after the immediate loading of multiunit fixed partial prostheses over either tapered implants (TIs) or straight implants (SIs) in the posterior region., Materials and Methods: Forty-eight patients (24 patients, 52 implants in TI group; 24 patients, 50 implants in SI group) were included for the study. Except for the one SI group patient whose two implants showed the insertion torque less than 30 Ncm, provisional prostheses designed and fabricated from intraoral scan data obtained immediately after implant surgery were delivered to rest of the 47 subjects at 3-7 days. After a year, the survival rate was estimated by intention-to-treat (ITT) and per-protocol (PP) analyses, and marginal bone loss (MBL) and implant stability were also analyzed statistically (p < 0.05)., Results: Survival rate at implant level in TI group was 96.2%, and that of SI group in the ITT analysis was 86.0%. Intergroup difference, however, was not statistically significant (p > 0.05). Insertion torque was significantly higher in TI group than SI group (47.12 ± 6.37 Ncm vs. 41.60 ± 9.77 Ncm; p < 0.05). MBLs of both groups were less than 0.1 mm at 1-year follow-up and was similar between two groups (p > 0.05)., Conclusions: Immediate loading of fixed partial prostheses after TI and SI placement showed reliable outcomes in the partially edentulous posterior ridge. In terms of the initial mechanical stability, the performance was superior for TIs than for SIs., (© 2021 Wiley Periodicals LLC.)

Objective: To compare the outcome after extensive lateral guided bone regeneration using deproteinized bovine bone mineral (DBBM) with or without autogenous bone chips in a canine model of chronic horizontal alveolar ridge defect., Materials and Methods: The second, third and fourth lower premolars of both sides were extracted, and the buccal bone walls were completely removed in five beagle dogs. After 4 weeks, DBBM particles mixed with autogenous bone chips at a ratio of 1:1 were grafted at one side (DBBM/Auto group), while DBBM particles alone were grafted at the contralateral side (DBBM group). The graft materials on both sides were covered by a resorbable collagen membrane and fixation pins. Microcomputed tomographic volume and histomorphometric analyses were performed at 16 weeks post-surgery., Results: The ridges of both groups were recovered horizontally, but new bone formation beyond the original ridge contour at the defect site was not found. The DBBM group exhibited a larger total radiographic augmented volume and new bone volume compared with the DBBM/Auto group, but the differences were minimal (p > .05). Histologically, the regenerated area and new bone area were also slightly larger without any statistical significance in the DBBM group than in the DBBM/Auto group (p > .05)., Conclusion: The addition of autogenous bone chips to DBBM for lateral ridge augmentation may confer no advantage over grafting DBBM alone with respect to both space maintenance and de novo bone formation in dogs., (© 2021 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

Aim: To investigate new bone (NB) formation by using bone-block substitute materials with/without recombinant human bone morphogenetic protein-2 (rhBMP-2)., Materials and Methods: Three synthetic bone-block substitute materials [biphasic calcium phosphate (BCP); nanostructured hydroxyapatite (NH); 3D-printed tricalcium phosphate/hydroxyapatite (3DP)] and one xenogeneic deproteinized bovine bone mineral (DBBM) block substitute were affixed to rabbit calvarium using osteosynthesis screws, either with rhBMP-2 (n = 12) or without rhBMP-2 (n = 16). At 2 or 12 weeks (n = 6 with rhBMP-2 and n = 8 without rhBMP-2 for each week), histologic, histomorphometric and microcomputed tomography analyses were performed., Results: The application of rhBMP-2 increased NB formation in all experimental groups at both weeks. DBBM resulted in a greater area of NB compared with synthetic blocks either with or without rhBMP-2 at 2 weeks (2.8 ± 0.9 vs. 1.4 ± 0.5-1.9 ± 1.4 mm 2 ; 1.4 ± 1.0 vs. 0.6 ± 0.3-0.9 ± 0.5 mm 2 ) and without rhBMP-2 at 12 weeks (3.0 ± 0.8 vs. 1.7 ± 0.7-2.6 ± 1.5 mm 2 ) (p > 0.05). NB formation did not differ significantly for DBBM and the three types of synthetic block with rhBMP-2 at 12 weeks (4.5 ± 2.0 vs. 3.8 ± 0.7-5.1 ± 1.1 mm 2 ; p > 0.05)., Conclusions: rhBMP-2 enhanced NB in all blocks. DBBM blocks yielded more NB than synthetic blocks without rhBMP-2. The application of rhBMP-2 appears to compensate for differences in late healing., (© 2021 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

Background: This in vitro study mainly aimed to compare VARO Guide ® to the surgical guide fabricated by CAD/CAM (NAVI Guide ® ) in terms of accuracy and efficacy of the implant surgery held in the dentiform model., Methods: Twenty surgeons, 10 dentists in the beginner group and 10 dentists in the expert group, participated in the study. Each surgeon conducted fully guided surgery in dentiform models twice, once with VARO Guide ® (VG surgery) and the other time with a conventional type of templates, NAVI Guide ® (NG surgery). Based on the superimposition of presurgical and postsurgical STL files, the positional deviations between the virtually planned and actually placed implants and the time spent on presurgical preparation and surgical procedures were estimated and compared., Results: All dimensional deviations were similar between the two groups ( p > 0.05), and there was no significant difference between the expert and beginner groups regardless of the guide system. The total procedure time (mean (median)) of the VG surgery (26.33 (28.58) min) was significantly shorter than that of the NG surgery (378.83 (379.35) min; p < 0.05). While the time spent only for the fully guided implant surgery (from the start of the surgical guide sitting onto the dentiform model to the final installation of the implant fixture) was comparable ( p > 0.05), the presurgical preparation time spent on virtual implant planning and surgical guide fabrication in the VG surgery (19.63 (20.93) min) was significantly shorter compared to the NG surgery (372.93 (372.95) min; p < 0.05)., Conclusions: Regardless of experience, both VG and NG surgery showed reliable positional accuracy; however, the total procedure time and the preparation time were much shorter in the VG surgery compared to the NG surgery.

The objective of this study was to investigate in vitro release kinetics and ossification patterns of bone morphogenetic protein-2-soaked collagenated porcine bone mineral (BMP-2/CPBM) in rabbit sinuses. Release kinetics of BMP-2/CPBM was determined in vitro up to 56 days. In 16 rabbits, BMP-2/CPBM (BMP group) and CPBM alone (control group) were bilaterally grafted in both sinuses. After 4 ( N  = 8) and 12 ( N  = 8) weeks, radiographic and histologic analyses were performed. Approximately 40% of BMP-2 was released from CPBM during 3 days in vitro ; release maintained at a reduced level until day 56. In vivo , new bone formation in BMP group was dominant at the center and decreased toward the borders of the sinus, while it mainly possessed close to the sinus membrane and basal bone in control group. At the center, significantly more new bone was found in BMP group compared to control group at 4 weeks (29.14% vs. 16.50%; p  < 0.05). The total augmented volume of BMP group was significantly greater than control group at 4 (370.13 mm 3 vs. 299.32 mm 3 ) and 12 (400.40 mm 3 vs. 290.10 mm 3 ) weeks ( p  < 0.05). In conclusion, BMP-2/CPBM demonstrated a core ossification with a greater augmented volume and new bone formation in the center of the sinus compared to CPBM alone. Impact statement The center of the augmented maxillary sinus tends to show a slower and inferior new bone formation compared to the sites near the sinus membrane and basal bone. In this study, bone morphogenetic protein-2 (BMP-2) loaded onto collagenated porcine bone mineral (CPBM) resulted in a greater augmented volume and new bone formation at the center of the grafted sinus compared to CPBM alone. Therefore, BMP-2-added CPBM in maxillary sinus augmentation may potentially be beneficial to the clinicians, in terms of accelerating the new bone formation at the center area where the apical half of the implant fixture usually places.

Objective: To assess the efficacy of three mechanical decontamination methods in four types of commercially available implants., Material and Methods: Ninety-six implants of four commercial brands with different designs (regarding thread depth and thread pitch) were soaked in a surrogate biofilm (ink) and air-dried. Circumferential standardized peri-implant defects with 6 mm in depth and 1.55 mm in width were custom-made with a 3D printer. Stained implants were inserted in the defects and instrumented with three different methods: a titanium brush (TNB), a metallic ultrasonic tip (IST) and an air abrasive (PF). Standardized photographs were taken vertically to the implant axis (flat view), and with angulations of 60° (upper view) and 120° (lower view) to the implant long axis. The percentage of residual stain (PRS) was calculated with the image analysis software. Scanning electron microscope evaluations were performed on the buccal aspect of the implants at the central level of the defect., Results: The efficacy of PF was significantly inferior to the TNB and IST in all implant designs, while there were no significant differences between TNB and IST. IST showed significantly higher PRS in the implant with the highest thread pitch, while the TNB had the highest PRS in the implant with a marked reverse buttress-thread design. The micro-thread design had the lowest values of PRS for all decontamination methods. The apically facing threads represented the areas with highest PRS for all implant designs and decontamination methods., Conclusion: Thread geometry influenced the access of the decontamination devices and in turn its efficacy. Implants with lower thread pitch and thread depth values appeared to have less residual staining., Clinical Relevance: Clinicians must be aware of the importance of thread geometry in the decontamination efficacy.

This study aimed to fabricate a multi-layered biphasic calcium phosphate (BCP) platform for programmed bone morphogenetic protein-2 (BMP-2) release, which means to block the initial burst release and promote releasing during the differentiation phase of osteogenic cells. And it is to confirm in vivo whether this platform has osteogenic inductivity even when extremely low doses of BMP-2 are loaded compared to the conventional soaking method. Our strategy consisted of preparing a multilayer coating on BCP to minimize the contact between BMP-2 and BCP and allow the loading of BMP-2. The multilayer, which is surface-modified on BCP, is composed of an organosilicate and a natural polymer-based layer-by-layer (LbL) film. We applied (3-Aminopropyl)triethoxysilane (APTES) as an organosilicate was used for amine-functionalized BCP and (collagen/heparin) 5 film was used to delay and sustain BMP-2 release. The coated multilayer not only reduced the initial burst release by more than 50% but also loaded more BMP-2. For in vivo experiment, histomorphometric analysis, it was observed that the BCP platform loaded with extremely low concentration BMP-2 (0.01 mg/ml) induced a significantly larger amount of new bones at 8 weeks compared to the conventional soaking method in the rabbit calvarium onlay graft model., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Aim: To investigate the immunohistochemical characteristics of a highly porous synthetic bone substitute and a cross-linked collagen membrane for guided bone regeneration., Methods: Three experimental groups were randomly allocated at chronic peri-implant dehiscence defect in 8 beagle dogs: (i) biphasic calcium phosphate covered by a cross-linked collagen membrane (test group), (ii) deproteinized bovine bone mineral covered by a natural collagen membrane (positive control) and (iii) no treatment (negative control). After 8 and 16 weeks of submerged healing, dissected tissue blocks were processed for immunohistochemical analysis. Seven antibodies were used to detect the remaining osteogenic and angiogenic potential, and quantitative immunohistochemical analysis was done by software., Results: The antigen reactivity of alkaline phosphatase was significantly higher in the test group compared to the positive and negative controls, and it maintained till 16 weeks. The intensity of osteocalcin was significantly higher in the positive control at 8 weeks than the other groups, but significantly decreased at 16 weeks and no difference was found between the groups. A significant large number of TRAP-positive cells were observed in the test group mainly around the remaining particles at 16 weeks. The angiogenic potential was comparable between the groups showing no difference in the expression of transglutaminase II and vascular endothelial growth factor., Conclusion: Guided bone regeneration combining a highly porous biphasic calcium phosphate synthetic biomaterial with a crosslinked collagen membrane, resulted in extended osteogenic potential when compared to the combination of deproteinized bovine bone mineral and a native collagen membrane., (© 2021 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

After avulsion and replantation, teeth are at risk of bone and root resorption. The present study aimed to demonstrate that the intra-nuclear transducible form of transcription modulation domain of p65 (nt-p65-TMD) can suppress osteoclast differentiation in vitro, and reduce bone resorption in a rat model of tooth replantation. Cell viability and nitric oxide release were evaluated in RAW264.7 cells using CCK-8 assay and Griess reaction kit. Osteoclast differentiation was evaluated using quantitative reverse transcriptase-polymerase chain reaction (RT-PCR) and tartrate-resistant acid phosphatase (TRAP) staining. Thirty-two maxillary rat molars were extracted and stored in saline ( n = 10) or 10 µM nt-p65-TMD solution ( n = 22) before replantation. After 4 weeks, specimens were scored according to the inflammatory pattern using micro-computed tomography (CT) imaging and histological analyses. nt-p65-TMD treatment resulted in significant reduction of nitric oxide release and osteoclast differentiation as studied using PCR and TRAP staining. Further, micro-CT analysis revealed a significant decrease in bone resorption in the nt-p65-TMD treatment group ( p < 0.05). Histological analysis of nt-p65-TMD treatment group showed that not only bone and root resorption, but also inflammation of the periodontal ligament and epithelial insertion was significantly reduced. These findings suggest that nt-p65-TMD has the unique capabilities of regulating bone remodeling after tooth replantation.

Objective: To compare the clinical, radiographic, and histological healing patterns between the immediate and delayed applications of bone morphogenetic protein-2 (BMP-2) in damaged extraction sockets in dogs., Materials and Methods: The distal roots of the fourth premolars of the mandible were extracted bilaterally in five beagle dogs, and buccal bone defects (4 mm wide and 9 mm high) were surgically created. Collagenated biphasic calcium phosphate (CBCP) soaked for 10 min in 100 μL of BMP-2 solution was applied immediately to the defect site in the control group. In the test group, the BMP-2 solution of same dose was injected into the grafted site 2 weeks after grafting with a saline-soaked CBCP. The dogs were sacrificed 2 weeks later. Clinical, histological, and radiographic analyses were followed., Results: Swelling and inflammatory reactions were predominantly observed in the control group at 2 weeks. The area of new bone formation was significantly larger in the control group compared with the test group (10.8 ± 7.0 mm 2 [mean ± SD] and 6.3 ± 3.1 mm 2 , respectively; p = 0.043). No significant difference was found in ridge width at 2 mm, 4 mm and 6 mm below the lingual bone crest between the control (2.6 ± 1.0 mm, 3.2 ± 0.9 mm and 4.5 ± 0.5 mm, respectively) and test group (3.3 ± 1.0 mm, 3.7 ± 1.3 mm and 4.2 ± 1.0 mm; all p > 0.05)., Conclusions: Delayed application of BMP-2 2 weeks after surgery did not show any advantage over immediate application of BMP-2 in terms of new bone formation., Clinical Relevance: This study suggests that it might be better to apply BMP-2 immediately in alveolar ridge preservation, instead of delayed application, in order to enhance new bone formation.

(1) Background: Dental calculus works as a niche wherein pathogenic bacteria proliferate in the oral cavity. Previous studies revealed the anticalculus activity of pyrophosphates, however there was no clinical study that evaluated microbiome changes associated with calculus inhibition. Therefore, the aim of this randomized clinical trial was to evaluate the calculus inhibition of pyrophosphate-containing toothpaste and its effect on oral microbiome changes. (2) Methods: Eighty subjects with a calculus index ≥2 on the lingual of the mandibular anterior tooth were randomly allocated to the test group that pyrophosphate-containing toothpaste was given to or the placebo control group. Full mouth debridement and standardized tooth brushing instruction were given before the allocation. Plaque index, gingival index, calculus index, probing depth, and bleeding on probing were measured at the baseline, and at 4, 8 and 12 weeks. Genomic DNA was extracted from the plaque samples collected at the baseline and at 12 weeks, and 16S ribosomal RNA gene amplicon sequencing was applied for microbiome analysis. (3) Results: None of the clinical parameters showed significant differences by visits or groups, except the plaque index of the test group, which reduced significantly between 4 and 12 weeks. A significant difference of microbiome between the baseline and 12 weeks was observed in the test group. Between baseline and 12 weeks, the proportion of Spirochetes decreased in the control group, and the proportions of Proteobacteria , Fusobacteria and Spirochetes in the phylum level and the proportions of Haemophilus , Fusobacterium and Capnocytophaga in the genus level decreased in the test group. In the test group, as plaque index decreased, Streptococcus increased, and Fusobacterium and Haemophilus parainfluenza decreased. (4) Conclusion: The use of pyrophosphate-containing toothpaste effectively inhibited the dysbiosis of the oral microbiome and the proliferation of pathogenic species in periodontal disease. Clinically, plaque formation in the pyrophosphate-containing toothpaste group was effectively decreased, however there was no significant change in calculus deposition.

Lidocaine is a local anesthetic agent used in the form of injection and topical cream. However, these formulation types have limitations of being either painful or slow-acting, thereby hindering effective and complete clinical performance of lidocaine. Dissolving microneedles (DMNs) are used to overcome these limitations owing to their fast onset time and minimally invasive administration methods. Using hyaluronic acid and lidocaine to produce the drug solution, a lidocaine HCl encapsulated DMN (Li-DMN) was fabricated by centrifugal lithography. The drug delivery rate and local anesthetic quality of Li-DMNs were evaluated using the pig cadaver insertion test and Von Frey behavior test. Results showed that Li-DMNs could deliver sufficient lidocaine for anesthesia that is required to be utilized for clinical level. Results from the von Frey test showed that the anesthetic effect of Li-DMNs was observed within 10 min after administration, thus confirming fast onset time. A toxicity test for appropriate clinical application standard was conducted with a microbial limit test and an animal skin irritation test, showing absence of skin irritation and irritation-related microorganisms. Overall, Li-DMN is a possible alternative drug delivery method for local anesthesia, meeting the requirements for clinical conditions and overcoming the drawbacks of other conventional lidocaine administration methods.

Objective: To compare the efficacy of a collagenated synthetic bone substitute (C-SBS) to a particulated synthetic bone substitute (P-SBS) in volume maintenance and new bone formations in a rabbit sinus model., Materials and Methods: Either C-SBS or P-SBS was grafted in both sinuses of 16 rabbits. Four (N = 8) or 12 (N = 8) weeks after the surgery, total augmented volume (TAV) and area (TAA), as well as new bone volume (NBV) and area (NBA), were statistically compared by radiographic and histomorphometric analyses (p < .05)., Results: The differences in TAV, NBV, TAA and NBA between C-SBS and P-SBS groups at 4 weeks were not statistically significant. The TAV (267.13 ± 62.08 vs. 200.18 ± 40.32 mm 3 ) and NBV (103.26 ± 10.50 vs. 71.10 ± 7.58 mm 3 ) in group C-SBS were significantly higher than in group P-SBS at 12 weeks (p < .05). The TAA (19.36 ± 2.88 vs. 14.48 ± 2.08 mm 2 ) and NBA (5.43 ± 1.20 vs. 3.76 ± 0.78 mm 2 ) in group C-SBS were significantly higher than in group P-SBS at 12 weeks (p < .05)., Conclusions: Collagenated synthetic bone substitute grafted in rabbit sinuses demonstrated more favourable outcomes across all outcome measures compared to P-SBS at 12 weeks., (© 2020 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

Background: Local delivery agents (LDA) have the advantage of delivering the antibiotics at high concentrations to the targeted sites. However, the constant flow of gingival crevicular fluids and saliva may restrict their efficacy. Therefore, the drug sustainability and pharmacodynamic properties of any proposed LDA should be evaluated., Methods: Four dental implants were placed unilaterally in the edentulous mandible of six beagle dogs. Peri-implantitis were experimentally induced using silk-ligatures. Each implant was randomly allocated to receive one of the following four treatments: (i) MC (Chitosan-alginate (CA) minocycline), (ii) MP (CA-without minocycline), (iii) PG (Polyacrylate-glycerin minocycline), and (iv) Control (mechanical debridement only). Mechanical therapies and LDAs were administered into the gingival sulcus two times at a 4-week interval. Drug sustainability as well as clinical, radiographical, and immunohistochemical (IHC) analyses were conducted to evaluate the efficacies of treatments., Results: Reduced mean probing depth was observed in all of the test groups after the second delivery. A minimal marginal bone level change was observed during the treatment period (MP (-0.06 ± 0.53 mm) to PG (-0.25 ± 0.42 mm)). The distribution of IHC cell marker analysis of all targeted antibodies ranged from 6.34% to 11.33%. All treatment outcomes between the test groups were comparable. A prolonged retention of LDA was observed from CA microspheres (MC and MP) at both administrations ( p < 0.017) and prolonged sustainability of bacteriostatic effect was observed from MC compared to PG after the second administration ( p < 0.05)., Conclusions: Prolonged retention of CA microspheres was observed and the longer bacteriostatic effect was observed from the MC group. Mechanical debridement with adjunct LDA therapy may impede peri-implantitis progression, however, prolonged drug action did not lead to improved treatment outcome.

Background: To assess the soft tissue dimension following tooth extraction and alveolar ridge preservation in the posterior maxilla compared to spontaneous healing., Methods: Thirty-five patients randomly assigned to alveolar ridge preservation (ARP) and spontaneous healing (SH) after maxillary molar extraction. The crestal, buccal, and palatal gingival thickness at 6 months was measured around virtually placed implant fixtures using superimposed cone-beam computed tomography and intraoral scan taken at 6 months. Buccal mucogingival junction (MGJ) level change over 6 months was estimated using intraoral scans obtained at suture-removal and 6 months., Results: The crestal gingiva was significantly thinner in group ARP (-1.16 mm) compared to group SH ( p < 0.05). The buccal and palatal gingiva was significantly thinner at the implant shoulder (IS) level in group ARP (buccal: -0.75 mm; palatal: -0.85 mm) compared to group SH ( p < 0.05). The thickness at 2 mm below the IS of both sides and the buccal MGJ level change were similar in both groups ( p > 0.05)., Conclusions: ARP in the posterior maxilla resulted in a thinner soft tissue on top of and at the prospective level of the implant shoulder at 6 months. The buccal MGJ level changed minimal for 6 months in both groups.

Purpose: This study was conducted to assess the efficacy of prophylactic gingival grafting in the mandibular anterior labial area for preventing orthodontically induced gingival recession., Methods: Eight mongrel dogs received gingival graft surgery at the first (I1) and third (I3) mandibular incisors on both sides based on the following group allocation: AT group (autogenous connective tissue graft on I1), AT-control group (contralateral side in the AT group), CM group (xenogeneic cross-linked collagen matrix graft on I3) and CM-control group (contralateral side in the CM group). At 4 weeks after surgery, 6 incisors were splinted and proclined for 4 weeks, followed by 16 weeks of retention. At 24 weeks after surgery, casts were made and compared with those made before surgery, and radiographic and histomorphometric analyses were performed., Results: Despite the proclination of the incisal tip (by approximately 3 mm), labial gingival recession did not occur. The labial gingiva was thicker in the AT group (1.85±0.50 mm vs. 1.76±0.45 mm, P >0.05) and CM group (1.90±0.33 mm vs. 1.79±0.20 mm, P >0.05) than in their respective control groups., Conclusions: The level of the labial gingival margin did not change following labial proclination of incisors in dogs. Both the AT and CM groups showed enhanced gingival thickness., Competing Interests: No potential conflict of interest relevant to this article was reported., (Copyright © 2020. Korean Academy of Periodontology.)

Background: The objective of this is preclinical investigation was to evaluate the differential drug sustainability and pharmacodynamic properties of two local minocycline microsphere carriers: chitosan-coated alginate (CA) and poly(meth)acrylate-glycerin (PG)., Methods: Four dental implants were placed unilaterally in the edentulous mandible of six beagle dogs. Each implant was randomly assigned to receive one of the following four treatments: (i) CA (CA-based minocycline), (ii) placebo (CA substrate without minocycline), (iii) PG (PG-based minocycline) and (iv) control (mechanical debridement only). After inducing peri-implant mucositis, the randomly assigned treatments were administered into the gingival sulcus twice at a 4-week interval using a plastic-tipped syringe. Drug sustainability and pharmacodynamic (clinical, radiographical and cell marker intensity) evaluations were performed after each administration., Results: The CA microspheres remained longer around the healing abutment compared to the PG microspheres at both administrations and a longer bacteriostatic effect was observed from CA (7.0 ± 5.7 days) compared to PG (1.2 ± 2.6 days). The efficacy of the applied therapies based on clinical, radiographical and histological analyses were comparable across all treatment groups., Conclusions: CA microspheres showed longer carrier and bacteriostatic effect sustainability when compared to PG microspheres, however, longer drug sustainability did not lead to improved treatment outcomes.

Objectives: To determine the volume stability of a sinus augmented with a collagenated bovine bone mineral (CBBM) in case of an intact or perforated Schneiderian membrane (SM)., Materials and Methods: A bilateral sinus augmentation procedure was performed in eight rabbits. The SM was intentionally perforated in one side (SMP group), while it remained intact in contra-lateral side (control group) and the same amount of CBBM was then grafted. At 12 weeks, the animals were euthanized for radiographic and histomorphometric analyses., Results: The augmented volume did not differ significantly between the two groups: 262.2 ± 32.1 mm 3 in SMP group and 261.9 ± 48.5 mm 3 in the control group (p = .959). There was no significant difference in the total augmented area: 24.7 ± 5.2 mm 2 in SMP group and 23.2 ± 2.9 mm 2 in the control group (p = .773). The areas of newly formed bone also did not differ significantly between the two groups, but was significantly lower at the centre of the augmented region than in the region of the surgical window in both groups (p < .05)., Conclusion: A perforation of the SM in a rabbit model does neither impact the augmented volume nor new bone formation following grafting of the sinus with a CBBM., (© 2020 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.)

Small molecules including sodium butyrate (SB) and dimethyloxalylglycine (DMOG) can promote bone regeneration via inhibitive effects eliciting cellular responses through signaling cascades. The purpose of this study was to determine the synergistic effects of SB and DMOG loaded on calcium sulfate (CaS) on bone regeneration in the challenging vertical augmentation model in the rabbit calvarium. Four plastic cylinders screwed on the calvarium of each of 10 rabbits were randomly grafted with CaS, CaS/SB, CaS/DMOG, or CaS/DMOG/SB. All specimens were assessed by radiographic, histologic, and histomorphometric analyses. In the radiographic analysis, three different layers (new bone, degraded CaS, and pristine CaS layers) could be distinguished within the cylinder in all groups at 2 weeks. Newly formed bone grew up from basal bone, and CaS in contact with newly formed bone was degraded into small particles to form a different layer. At 8 weeks, most of the pristine CaS had been absorbed and hardly seen within the cylinder. In the histomorphometric analysis, all groups showed comparable new bone areas and heights at 2 and 8 weeks. The DMOG group showed a significant increase in new bone area at 8 weeks compared with 2 weeks, but there was no significant difference among the groups at 8 weeks. The DMOG group showed significantly lower values for the residual material area than the control group at 2 weeks. Within the limitations of this study, SB and DMOG seem to exert smaller synergistic effects on bone regeneration compared to CaS alone in vertical bone augmentation., (© 2019 Wiley Periodicals, Inc.)