Search

In recent experiments, unprecedentedly large values for the conductivity of electrolytes through carbon nanotubes (CNTs) have been measured, possibly owing to flow slip and a high pore surface charge density whose origin remains debated. Here, we model the coupling between the CNT quantum capacitance and the classical electrolyte-filled pore one and study how electrolyte transport is modulated when a gate voltage is applied to the CNT. Our work shows that under certain conditions the quantum capacitance is lower than the pore one due to the finite quasi-1D CNT electronic density of states and therefore controls the CNT surface charge density that dictates the confined electrolyte conductivity. The dependence of the computed surface charge and conductivity on reservoir salt concentration and gate voltage is thus intimately related to the electronic properties of the CNT. This approach provides key insight into why metallic CNTs have larger experimentally measured conductivities than semiconducting ones.

Recent direct measurements of the growth kinetics of individual carbon nanotubes revealed abrupt changes in the growth rate of nanotubes maintaining the same crystal structure. These stochastic switches call into question the possibility of chirality selection based on growth kinetics. Here, we show that a similar average ratio between fast and slow rates of around 1.7 is observed largely independent of the catalyst and growth conditions. A simple model, supported by computer simulations, shows that these switches are caused by tilts of the growing nanotube edge between two main orientations, close-armchair or close-zigzag, inducing different growth mechanisms. The rate ratio of around 1.7 then simply results from an averaging of the number of growth sites and edge configurations in each orientation. Beyond providing insights on nanotube growth based on classical crystal growth theory, these results point to ways to control the dynamics of nanotube edges, a key requirement for stabilizing growth kinetics and producing arrays of long, structurally selected nanotubes.

Hemorrhagic shock in combat trauma remains the greatest life threat to casualties with potentially survivable injuries. Advances in external hemorrhage control and the increasing use of damage control resuscitation have demonstrated significant success in decreasing mortality in combat casualties. Presently, an expanding body of literature suggests that fluid resuscitation strategies for casualties in hemorrhagic shock that include the prehospital use of cold-stored or fresh whole blood when available, or blood components when whole blood is not available, are superior to crystalloid and colloid fluids. On the basis of this recent evidence, the Committee on Tactical Combat Casualty Care (TCCC) has conducted a review of fluid resuscitation for the combat casualty who is in hemorrhagic shock and made the following new recommendations: (1) cold stored low-titer group O whole blood (CS-LTOWB) has been designated as the preferred resuscitation fluid, with fresh LTOWB identified as the first alternate if CS-LTOWB is not available; (2) crystalloids and Hextend are no longer recommended as fluid resuscitation options in hemorrhagic shock; (3) target systolic blood pressure (SBP) resuscitation goals have been redefined for casualties with and without traumatic brain injury (TBI) coexisting with their hemorrhagic shock; and (4) empiric prehospital calcium administration is now recommended whenever blood product resuscitation is required., (2021.)

Understanding the kinetic selectivity of carbon nanotube growth at the scale of individual nanotubes is essential for the development of high chiral selectivity growth methods. Here we demonstrate that homodyne polarization microscopy can be used for high-throughput imaging of long individual carbon nanotubes under real growth conditions (at ambient pressure, on a substrate) and with subsecond time resolution. Our in situ observations on hundreds of individual nanotubes reveal that about half of them grow at a constant rate all along their lifetime while the other half exhibits stochastic changes in growth rates and/or switches between growth, pause, and shrinkage. Statistical analysis shows that the growth rate of a given nanotube essentially varies between two values, with a similar average ratio (∼1.7) regardless of whether the rate change is accompanied by a change in chirality. These switches indicate that the nanotube edge or the catalyst nanoparticle fluctuates between different configurations during growth.

Competing Interests: None. DISCLAIMERSThe views expressed in this article reflect the results of research conducted by the author and do not necessarily reflect the official policy or position of the Department of the Navy, Department of Defense, nor the United States Government. I am a military service member or federal/contracted employee of the United States government. This work was prepared as part of my official duties. Title 17 U.S.C. 105 provides that “copyright protection under this title is not available for any work of the United States Government.” Title 17 U.S.C. 101 defines a U.S. Government work as work prepared by a military service member or employee of the U.S. Government as part of that person's official duties.

The number of precise conductance measurements in nanopores is quickly growing. To clarify the dominant mechanisms at play and facilitate the characterization of such systems for which there is still no clear consensus, we propose an analytical approach to the ionic conductance in nanopores that takes into account (i) electro-osmotic effects, (ii) flow slip at the pore surface for hydrophobic nanopores, (iii) a component of the surface charge density that is modulated by the reservoir pH and salt concentration c_{s} using a simple charge regulation model, and (iv) a fixed surface charge density that is unaffected by pH and c_{s}. Limiting cases are explored for various ranges of salt concentration and our formula is used to fit conductance experiments found in the literature for carbon nanotubes. This approach permits us to catalog the different possible transport regimes and propose an explanation for the wide variety of currently known experimental behavior for the conductance versus c_{s}.

Ionic transport through single-walled carbon nanotubes (SWCNTs) is promising for many applications but remains both experimentally challenging and highly debated. Here we report ionic current measurements through microfluidic devices containing one or several SWCNTs of diameter of 1.2 to 2 nm unexpectedly showing a linear or a voltage-activated I-V dependence. Transition from an activated to a linear behavior, and stochastic fluctuations between different current levels were notably observed. For linear devices, the high conductance confirmed with different chloride salts indicates that the nanotube/water interface exhibits both a high surface charge density and flow slippage, in agreement with previous reports. In addition, the sublinear dependence of the conductance on the salt concentration points toward a charge-regulation mechanism. Theoretical modelling and computer simulations show that the voltage-activated behavior can be accounted for by the presence of local energy barriers along or at the ends of the nanotube. Raman spectroscopy reveals strain fluctuations along the tubes induced by the polymer matrix but displays insufficient doping or variations of doping to account for the apparent surface charge density and energy barriers revealed by ion transport measurements. Finally, experimental evidence points toward environment-sensitive chemical moieties at the nanotube mouths as being responsible for the energy barriers causing the activated transport of ions through SWCNTs within this diameter range.

In situ and ex situ Raman measurements were used to study the dynamics of the populations of single-walled carbon nanotubes (SWCNTs) during their catalytic growth by chemical vapor deposition. Our study reveals that the nanotube diameter distribution strongly evolves during SWCNT growth but in dissimilar ways depending on the growth conditions. We notably show that high selectivity can be obtained using short or moderate growth times. High-resolution transmission electron microscopy observations support that Ostwald ripening is the key process driving these seemingly contradictory results by regulating the size distribution and lifetime of the active catalyst particles. Ostwald ripening appears as the main termination mechanism for the smallest diameter tubes, whereas carbon poisoning dominates for the largest ones. By unveiling the key concept of dynamic competition between nanotube growth and catalyst ripening, we show that time can be used as an active parameter to control the growth selectivity of carbon nanotubes and other 1D systems.

Liquid-phase encapsulation of α-sexithiophene (6T) molecules inside individualized single-walled carbon nanotubes (SWCNTs) is investigated using Raman imaging and spectroscopy. By taking advantage of the strong Raman response of this system, we probe the encapsulation isotherms at 30 and 115 °C using a statistical ensemble of SWCNTs deposited on a oxidized silicon substrate. Two distinct and sequential stages of encapsulation are observed: Stage 1 is a one-dimensional (1D) aggregation of 6T aligned head-to-tail inside the nanotube, and stage 2 proceeds with the assembly of a second row, giving pairs of aligned 6Ts stacked together side-by-side. The experimental data are fitted using both Langmuir (type VI) and Ising models, in which the single-aggregate (stage 1) forms spontaneously, whereas the pair-aggregate (stage 2) is endothermic in toluene with formation enthalpy of ΔH pair = (260 ± 20) meV. Tunable Raman spectroscopy for each stage reveals a bathochromic shift of the molecular resonance of the pair-aggregate, which is consistent with strong intermolecular coupling and suggestive of J-type aggregation. This quantitative Raman approach is sensitive to roughly 10 molecules per nanotube and provides direct evidence of molecular entry from the nanotube ends. These insights into the encapsulation process guide the preparation of well-defined 1D molecular crystals having tailored optical properties.

Paget-Schroetter syndrome is a rare but potentially debilitating condition affecting young, otherwise healthy individuals. This condition, also known as effort thrombosis, is an upper extremity deep vein thrombosis classically caused by anatomical abnormalities compressing the neurovascular structures of the thoracic outlet. The diagnosis is important to emergency medicine providers due to its secondary morbidity and mortality. Common complications affecting these active adults are pulmonary embolism and postthrombotic syndrome. Most patients report a precedent history of vigorous exercise or activity involving the upper extremities. We present a case of a 23-year-old man with redness and swelling of his dominant arm after weightlifting. Previous literature describes Paget-Schroetter syndrome from repetitive activities. The report highlights the limitations of imaging studies in proximal upper extremity deep vein thromboses. The initial selected imaging study, Doppler ultrasound, was negative in our case and was followed by a nondiagnostic computed tomographic venogram. Although ultrasound is the preferred diagnostic imaging modality, it is limited when thrombosis is present in the noncompressible region of the clavicle. Magnetic resonance venogram or computed tomographic venogram is recommended if index of suspicion is high and the ultrasound shows normal results, but these studies are highly dependent on technique, flow, and timing. The eventual diagnosis of axillosubclavian thrombosis was obtained only after specialty consultation and formal venography. This case discusses the limitations of each imaging modality and the importance of a comprehensive clinical approach to this rare diagnosis.

The extraordinary electronic, thermal and mechanical properties of carbon nanotubes (CNTs) closely relate to their structure. They can be seen as rolled-up graphene sheets with their electronic properties depending on how this rolling up is achieved. However, this is not the way they actually grow. Various methods are used to produce carbon nanotubes. They all have in common three ingredients: (i) a carbon source, (ii) catalyst nanoparticles and (iii) an energy input. In the case where the carbon source is provided in solid form, one speaks about 'high temperature methods' because they involve the sublimation of graphite which does not occur below 3200 °C. The first CNTs were synthesized by these techniques. For liquid or gaseous phases, the generic term of 'medium or low temperature methods' is used. CNTs are now commonly produced by these latter techniques at temperatures ranging between 350 and 1000 °C, using metal nanoparticles that catalyze the decomposition of the gaseous carbon precursor and make the growth of nanotubes possible. The aim of this review article is to give a general overview of all these methods and an understanding of the CNT growth process.

Single-walled carbon nanotubes are grown by catalytic chemical vapor deposition in various conditions of temperature and carbon precursor pressure. Systematic analyses of the Raman radial breathing modes at two laser wavelengths are used to monitor the evolution of the diameter distribution. Two distinct domains with opposite influences of the temperature and the precursor pressure on the diameter distribution are evidenced. Thanks to specially designed experiments made of two successive growths, three processes are identified to influence the diameter distribution during the nanotube growth: (i) at too low precursor pressure, nanotube nucleation cannot occur on the smallest catalyst particles; (ii) at low temperature and high precursor pressure, small catalyst particles are preferably encapsulated by disordered carbon structures; (iii) at high temperature, catalyst coarsening causes the disappearance of the smallest catalyst particles.

Complications of intrathecal drug delivery are relatively rare. Of these, infections, cutaneous erosion, and granulomas account for the most common complications. The latter is often noticed when the patient shows signs of sedation and/or reduced pain relief. Granulomas have always been considered to develop over a long period of time, usually calculated in months. Here, we present a case where a catheter-tip granuloma formed within 5 weeks of intrathecal morphine. The patient was carrying an intrathecal pump for 3 months when it was diagnosed. Probable causes of the formation are discussed., (© 2009 International Neuromodulation Society.)

In situ Raman measurements were used to investigate the kinetics and the self-deactivation of the growth of single-walled carbon nanotubes during catalytic chemical vapor deposition. The kinetics appear controlled by the mass-transport of the gaseous precursor at low precursor pressure and high temperature and by the catalytic decomposition of the precursor at high precursor pressure and low temperature. The initial growth rate and the lifetime display inversely correlated evolutions with the growth parameters. In addition, we measured the activation energy for the healing of defects during the growth and discuss it in comparison to the apparent activation energies measured for the initial growth rate and the lifetime. Our results support that the healing of the edge defects controls both the crystalline order and the growth lifetime.

We demonstrate the use of sequential catalytic growth to encapsulate iron, nickel-iron, and iron-cobalt phosphide catalyst nanoparticles periodically along the entire lengths of carbon nanotubes. Investigations by local electron spectroscopies and electron diffraction reveal the compositions and crystal structures of the encapsulated particles. Significantly, high spatial resolution magnetic characterization using magnetic force microscopy and off-axis electron holography demonstrates that encapsulated iron-cobalt phosphide nanoparticles are ferromagnetic at room temperature, in accordance with the properties of bulk metal phosphides of the same structure and composition.

Sequential catalytic growth provides an efficient tool for the synthesis of carbon nanotubes periodically inserted with catalyst nanoparticles. Several synthesis parameters were found crucial in order to induce this particular growth mechanism. The presence of phosphorus is required to form metal phosphide particles active for the formation of carbon nanotubes with a matchstick morphology. The metal composition (Ni/Fe ratio) and the carbon supply have no influence on the nanofilament type but strongly affect the nanotube yield. The synthesis temperature induces important changes on both the nanofilament type and yield, which are correlated with important transformations of the catalyst layer in terms of composition, particle size, and physical state.

Background: The social security department of the French national electric and gas company has established an ischemic heart disease register among a population of about 140 000 employees based on sick leaves as well as deaths recorded with their medical cause., Methods: History of the illness, medical tests and treatments were known retrospectively from the consulting physicians of the company. Acute coronary events recorded were: inaugural angina pectoris, myocardial infarction, sudden coronary death and fortuitous discovery of coronary disease., Results: A first study conducted on employees during the 1993-1995 period showed infarction incidence age rates similar to those estimated from the French MONICA registers for France as a whole. Regional discrepancies were observed for myocardial infarction rates: Nord-Pas de Calais, Champagne-Ardennes, Lorraine, Franche-Comté and Limousin were at the most elevated risk (SIR=131, 155, 169, 125 and 178 resp). Large variations according to socio-economic status were observed., Conclusion: This register will permit studies on the links between socio-economic status at different professional career points and the occurrence of ischemic heart disease and the evaluation of the impact of psychosocial factors such as previous depressive disorders.