Search

Beta-Lactamases are responsible for bacterial resistance to beta-lactams and are thus of major clinical importance. However, the identity of the general base involved in their mechanism of action is still unclear. Two candidate residues, Glu166 and Lys73, have been proposed to fulfill this role. Previous studies support the proposal that Glu166 acts during the deacylation, but there is no consensus on the possible role of this residue in the acylation step. Recent experimental data and theoretical considerations indicate that Lys73 is protonated in the free beta-lactamases, showing that this residue is unlikely to act as a proton abstractor. On the other hand, it has been proposed that the pKa of Lys73 would be dramatically reduced upon substrate binding and would thus be able to act as a base. To check this hypothesis, we performed continuum electrostatic calculations for five wild-type and three beta-lactamase mutants to estimate the pKa of Lys73 in the presence of substrates, both in the Henri-Michaelis complex and in the tetrahedral intermediate. In all cases, the pKa of Lys73 was computed to be above 10, showing that it is unlikely to act as a proton abstractor, even when a beta-lactam substrate is bound in the enzyme active site. The pKa of Lys234 is also raised in the tetrahedral intermediate, thus confirming a probable role of this residue in the stabilization of the tetrahedral intermediate. The influence of the beta-lactam carboxylate on the pKa values of the active-site lysines is also discussed.

The role of the mobile loop comprising residues 60-66 in metallo-beta-lactamases has been studied by site-directed mutagenesis, determination of kinetic parameters for six substrates and two inhibitors, pre-steady-state characterization of the interaction with chromogenic nitrocefin, and molecular modeling. The W64A mutation was performed in IMP-1 and BcII (after replacement of the BcII 60-66 peptide by that of IMP-1) and always resulted in increased K(i) and K(m) and decreased k(cat)/K(m) values, an effect reinforced by complete deletion of the loop. k(cat) values were, by contrast, much more diversely affected, indicating that the loop does not systematically favor the best relative positioning of substrate and enzyme catalytic groups. The hydrophobic nature of the ligand is also crucial to strong interactions with the loop, since imipenem was almost insensitive to loop modifications.

The bla FEZ-1 gene coding for the metallo-β-lactamase of Legionella (Fluoribacter) gormanii ATCC 33297 T was overexpressed via a T7 expression system in Escherichia coli BL21(DE3)(pLysS). The product was purified to homogeneity in two steps with a yield of 53%. The FEZ-1 metallo-β-lactamase exhibited a broad-spectrum activity profile, with a preference for cephalosporins such as cephalothin, cefuroxime, and cefotaxime. Monobactams were not hydrolyzed. The β-lactamase was inhibited by metal chelators. FEZ-1 is a monomeric enzyme with a molecular mass of 29,440 Da which possesses two zinc-binding sites. Its zinc content did not vary in the pH range of 5 to 9, but the presence of zinc ions modified the catalytic efficiency of the enzyme. A model of the FEZ-1 three-dimensional structure was built.

The Poisson-Boltzmann method was used to compute the pKa values of titratable residues in a set of class C β-lactamases. In these calculations, the pKa of the phenolic group of residue Tyr150 is the only one to stand out with an abnormally low value of 8.3, more than one pKa unit lower than the measured reference value for tyrosine in solution. Other important residues of the catalytic pocket, such as the conserved Lys67, Lys315, His314, and Glu272 (hydrogen-bonded to the ammonium group of Lys315), display normal protonation states at neutral pH. pKa values were also computed in catalytically impaired β-lactamase mutants. Comparisons between the relative kcat values and the Tyr150 pKa value in these mutants revealed a striking correlation. In active enzymes, this pKa value is always lower than the solution reference value while it is close to normal in inactive enzymes. These results thus support the hypothesis that the phenolate form of Tyr150 is responsible for the activation of the nucleophilic serine. The possible roles of Lys67 and Lys315 during catalysis are also discussed. Proteins 2000;40:23–28. © 2000 Wiley-Liss, Inc.

Three 1-alkoxycarbonyl-3-bromoazetidin-2-ones have been prepared by reaction of (3S)-3-(tert-butoxycarbonyl) amino azetidin-2-one with benzyl, trichloroethyl, and trifluoroethyl chloroformates followed by tBoc deprotection, diazotation of the exocyclic amino function and its substitution with potassium bromide. The 3-bromoazetidin-2-ones were obtained as racemic mixtures. Their hydroxide-catalyzed hydrolysis exclusively affords ring-opening products. Porcine pancreatic elastase (PPE) catalyzes the same reaction stereospecifically. Model building suggests that it is the (R) isomer that is enzymatically hydrolysed, The PPE-catalyzed hydrolysis is characterised by low k(cat) and K-m values. Accordingly, these compounds behave as transient inhibitors of the enzyme.

The study of the interactions between the Tyr280Phe mutant of the Streptomyces R61 DD-peptidase, various substrates and beta-lactam antibiotics shows that Tyr280 is involved not only in the formation of the acylenzyme with the peptide substrate and beta-lactam antibiotics, but also and specifically in the catalysis of the transpeptidation reaction. Surprisingly, this residue does not belong to the conserved structural and functional elements which characterise the penicillin-recognising enzymes.

The screening of the open reading frames identified in the whole yeast genome has allowed us to discover 34 proteins belonging to the mitochondrial carrier family. By phylogenetic study, they can be divided into 27 subfamilies including ADP/ATP, phosphate and citrate carriers, putative oxoglutarate and GDC carriers and 22 new subfamilies. Topology predictions using the 'positive inside rule' approach have shown that the yeast carriers are similarly oriented with both extremities exposed to the cytosol. In each subfamily, a strict conservation of the charged residues in the six transmembrane alpha-helices is observed, suggesting a functional role for these residues and the existence of 27 functionally distinct carriers.

A heat-labile beta-lactamase has been purified from culture supernatants of Psychrobacter immobilis A5 grown at 4 degrees C and the corresponding chromosomal ampC gene has been cloned and sequenced. All structural and kinetic properties clearly relate this enzyme to class C beta-lactamases. The kinetic parameters of P. immobilis beta-lactamase for the hydrolysis of some beta-lactam antibiotics are in the same range as the values recorded for the highly specialized cephalosporinases from pathogenic mesophilic bacteria. By contrast, the enzyme displays a low apparent optimum temperature of activity and a reduced thermal stability. Structural factors responsible for the latter property were analysed from the three-dimensional structure built by homology modelling. The deletion of proline residues in loops, the low number of arginine-mediated H-bonds and aromatic-aromatic interactions, the lower global hydrophobicity and the improved solvent interactions through additional surface acidic residues appear to be the main determinants of the enzyme flexibility.

The catalytic pathway of class A β-lactamases involves an acyl-enzyme intermediate where the substrate is ester-linked to the Ser-70 residue. Glu-166 and Lys-73 have been proposed as candidates for the role of general base in the activation of the serine OH group. The replacement of Glu-166 by an asparagine in the TEM-1 and by a histidine in the Streptomyces albus G β-lactamases yielded enzymes forming stable acyl-enzymes with β-lactam antibiotics. Although acylation of the modified proteins by benzylpenicillin remained relatively fast, it was significantly impaired when compared to that observed with the wild-type enzyme. Moreover, the E166N substitution resulted in a spectacular modification of the substrate profile much larger than that described for other mutations of Ω-loop residues. Molecular modeling studies indicate that the displacement of the catalytic water molecule can be related to this observation. These results confirm the crucial roles of Glu-166 and of the “catalytic” water molecule in both the acylation and the deacylation processes.

Bacterial resistance to beta-lactam antibiotics, a clinically worrying and recurrent problem, is often due to the production of beta-lactamases, enzymes that efficiently hydrolyze the amide bond of the beta-lactam nucleus. Imipenem and other carbapenems escape the activity of most active site serine beta-lactamases and have therefore become very popular drugs for antibacterial chemotherapy in the hospital environment. Their usefulness is, however, threatened by the appearance of new beta-lactamases that efficiently hydrolyze them. This study is focused on the structure and properties of two recently described class A carbapenemases, produced by Serratia marcescens and Enterobacter cloacae strains and leads to a better understanding of the specificity of beta-lactamases. In turn, this will contribute to the design of better antibacterial drugs. Three-dimensional models of the two class A carbapenemases were constructed by homology modeling. They suggested the presence, near the active site of the enzymes, of a disulfide bridge (C69-C238) whose existence was experimentally confirmed. Kinetic parameters were measured with the purified Sme-1 carbapenemase, and an attempt was made to explain its specific substrate profile by analyzing the structures of minimized Henri-Michaelis complexes and comparing them to those obtained for the "classical" TEM-1 beta-lactamase. The peculiar substrate profile of the carbapenemases appears to be strongly correlated with the presence of the disulfide bridge between C69 and C238.

Serine beta-lactamases contribute widely to the beta-lactam resistance phenomena. Unfortunately, the intimate details of their catalytic mechanism remain elusive and subject to some controversy even though many "natural" and "artificial" mutants of these different enzymes have been isolated. This paper is essentially focused on class C beta-lactamases, which contain a Tyr (Tyr150) as the first residue of the second conserved element, in contrast to their class A counterparts, in which a Ser is found in the corresponding position. We have modified this Tyr residue by site-directed mutagenesis. On the basis of the three-dimensional structure of the Enterobacter cloacae P99 enzyme, it seemed that residues Glu272 and His314 might also be important. They were similarly substituted. The modified enzymes were isolated and their catalytic properties determined. Our results indicated that His314 was not required for catalysis and that Glu272 did not play an important role in acylation but was involved to a small extent in the deacylation process. Conversely, Tyr150 was confirmed to be central for catalysis, at least with the best substrates. On the basis of a comparison of data obtained for several class C enzyme mutants and in agreement with recent structural data, we propose that the phenolate anion of Tyr150, in conjunction with the alkyl ammonium of Lys315, acts as the general base responsible for the activation of the active-site Ser64 during the acylation step and for the subsequent activation of a water molecule in the deacylation process. The evolution of the important superfamily of penicillin-recognizing enzymes is further discussed in the light of this proposed mechanism.

Beta-Lactamases are widespread in the bacterial world, where they are responsible for resistance to penicillins, cephalosporins, and related compounds, currently the most widely used antibacterial agents. Detailed structural and mechanistic understanding of these enzymes can be expected to guide the design of new antibacterial compounds resistant to their action. A number of high-resolution structures are available for class A beta-lactamases, whose catalytic mechanism involves the acylation of a serine residue at the active site. The identity of the general base which participates in the activation of this serine residue during catalysis has been the subject of controversy, both a lysine residue and a glutamic acid residue having been proposed as candidates for this role. We have used the pH dependence of chemical modification of epsilon-amino groups by 2,4,6,-trinitrobenzenesulfonate and the pH dependence of the epsilon-methylene 1H and 13C chemical shifts (in enzyme selectively labeled with [epsilon-13C]lysine) to estimate the pKa of the relevant lysine residue, lysine-73, of TEM-1 beta-lactamase. Both methods show that the pKa of this residue is > 10, making it very unlikely that this residue could act as a proton acceptor in catalysis. An alternative mechanism in which this role is performed by glutamate-166 through an intervening water molecule is described.

Five class A beta-lactamases produced by various mesophilic bacterial species have been compared. Although closely related in primary and overall structures, these enzymes exhibit very different stabilities. In order to investigate the factors responsible for these differences, several features deduced from the amino acid composition and three-dimensional structures were studied for the five proteins. This analysis revealed that higher stability appeared to correlate with increased numbers of intramolecular hydrogen bonds and of salt bridges. By contrast, the global hydrophobicity of the protein seemed to play a relatively minor role. A strongly unfavourable balance between charged residues and the presence of a cis-peptide bond preceding a non-proline residue might also contribute to the particularly low stability of two of the enzymes.

In previous studies, several amino acids of the active site of class A beta-lactamases have been modified by site-directed mutagenesis. On the basis of the catalytic mechanism proposed for the Streptomyces albus G beta-lactamase [Lamotte-Brasseur, Dive, Dideberg, Charlier, Frère & Ghuysen (1991) Biochem. J. 279, 213-221], the influence that these mutations exert on the hydrogen-bonding network of the active site has been analysed by molecular mechanics. The results satisfactorily explain the effects of the mutations on the kinetic parameters of the enzyme's activity towards a set of substrates. The present study also shows that, upon binding a properly structured beta-lactam compound, the impaired cavity of a mutant enzyme can readopt a functional hydrogen-bonding-network configuration.

In the present work, the conformation analysis, electrostatic potential calculations, and proton affinity evaluation are carried out for Cinchona alkaloids using theoretical molecular mechanics and quantum mechanical methods. The most probable conformation of the active erythro isomers at the receptor site seems to be that which enables the molecule to form intermolecular hydrogen bonds. In epiquinidine, the mutual orientation of O(12) and N(1) atoms favors intra- rather than intermolecular bonding, and this might be responsible for its inactivity. Comparison of the shape and size of the negative electrostatic potential areas provides a tentative explanation for the interaction of different erythro diastereoisomers with the same putative receptor, as well as for lack of such interaction in epiquinidine. The protonation energies calculated for cinchonidine and cinchonine confirm the higher basicity of the aliphatic N(1) as compared with that of the aromatic N(13) atom.

The sequences of class A beta-lactamases were compared. Four main groups of enzymes were distinguished: those from the gram-negative organisms and bacilli and two distinct groups of Streptomyces spp. The Staphylococcus aureus PC1 enzyme, although somewhat closer to the enzyme from the Bacillus group, did not belong to any of the groups of beta-lactamases. The similarities between the secondary structure elements of these enzymes and those of the class C beta-lactamases and of the Streptomyces sp. strain R61 DD-peptidase were also analyzed and tentatively extended to the class D beta-lactamases. A unified nomenclature of secondary structure elements is proposed for all the penicillin-recognizing enzymes.

Residue Arg220 was found to be important for the acylation of the Streptomyces albus G beta-lactamase by classical penicillins and cephalosporins bearing a carboxylate on C3 or C4. The R220L mutant exhibited strongly decreased kcat/Km values for those compounds. Conversely the acylation rates by benzylpenicillin methylester and deacetylcephalosporin C lactone were little affected, indicating a direct or indirect role of that positively charged residue in the interaction of the enzyme cavity with the negative charge of the substrate. Surprisingly that residue is not conserved in all class A beta-lactamases but when it is not present it can be seen in the known tertiary structures that the guanidinium group of another arginine side chain (Arg244) is similarly positioned. The mutation affected the behaviour of the enzyme towards cephaloridine much less than towards cephalothin. This might represent an example of substrate-assisted catalysis where the disappearance of a positive charge on the enzyme is partly compensated by the presence of a similarly charged group on one of the substrate side chains. All the experimental results are nicely explained by computer-modelling of the enzyme-substrate interactions.

The primary structure of an elastase from the Antarctic fish Notothenia neglecta (NE) was elucidated by molecular cloning and cDNA sequence analysis. The cDNA of interest was isolated from a cDNA library obtained from Notothenia's pyloric caeca. The amino acid sequence identity with mammalian elastases ranges between 53 and 64%, but interestingly reaches 79% with one isoform (CEB) of two recently isolated cod elastases. The most interesting changes distinguishing the model of NE, predicted from the three dimentional structure of the native porcine elastase (PE), concern the catalytic crevice located in the inter-domains region. These features might be involved in the adaptation to cold of the Antarctic elastase.

Endo-beta-1,4-xylanases of the family 11 glycosyl-hydrolases are catalytically active over a wide range of pH. Xyl1 from Streptomyces sp. S38 belongs to this family, and its optimum pH for enzymatic activity is 6. Xyn11 from Bacillus agaradhaerens and XylJ from Bacillus sp. 41M-1 share 85% sequence identity and have been described as highly alkalophilic enzymes. In an attempt to better understand the alkalophilic adaptation of xylanases, the three-dimensional structures of Xyn11 and Xyl1 were compared. This comparison highlighted an increased number of salt-bridges and the presence of more charged residues in the catalytic cleft as well as an eight-residue-longer loop in the alkalophilic xylanase Xyn11. Some of these charges were introduced in the structure of Xyl1 by site-directed mutagenesis with substitutions Y16D, S18E, G50R, N92D, A135Q, E139K, and Y186E. Furthermore, the eight additional loop residues of Xyn11 were introduced in the homologous loop of Xyl1. In addition, the coding sequence of the XylJ catalytic domain was synthesized by recursive PCR, expressed in a Streptomyces host, purified, and characterized together with the Xyl1 mutants. The Y186E substitution inactivated Xyl1, but the activity was restored when this mutation was combined with the G50R or S18E substitutions. Interestingly, the E139K mutation raised the optimum pH of Xyl1 from 6 to 7.5 but had no effect when combined with the N92D substitution. Modeling studies identified the possible formation of an interaction between the introduced lysine and the substrate, which could be eliminated by the formation of a putative salt-bridge in the N92D/E139K mutant.

Xyl1 from Streptomyces sp. S38 belongs to the low molecular mass family 11 of endo-beta-1,4-xylanases. Its three-dimensional structure has been solved at 2.0 A and its optimum temperature and pH for enzymatic activity are 60 degrees C and 6.0, respectively. Aspergillus kawachii xylanase XynC belongs to the same family but is an acidophilic enzyme with an optimum pH of 2.0. Structural comparison of Xyl1 and XynC showed differences in residues surrounding the two glutamic acid side chains involved in the catalysis that could be responsible for the acidophilic adaptation of XynC. Mutations W20Y, N48D, A134E, and Y193W were introduced by site-directed mutagenesis and combined in multiple mutants. Trp 20 and Tyr 193 are involved in substrate binding. The Y193W mutation inactivated Xyl1 whereas W20Y decreased the optimum pH of Xyl1 to 5.0 and slightly increased its specific activity. The N48D mutation also decreased the optimum pH of Xyl1 by one unit. The A134E substitution did not induce any change, but when combined with N48D, a synergistic effect was observed with a 1.4 unit decrease in the optimum pH. Modeling showed that the orientations of residue 193 and of the fully conserved Arg 131 are different in acidophilic and "alkaline" xylanases whereas the introduced Tyr 20 probably modifies the pKa of the acid-base catalyst via residue Asn 48. Docking of a substrate analog in the catalytic site highlighted striking differences between Xyl1 and XynC in substrate binding. Hydrophobicity calculations showed a correlation between acidophilic adaptation and a decreased hydrophobicity around the two glutamic acid side chains involved in catalysis.

Increased resistance to beta-lactam antibiotics is mainly due to beta-lactamases. X-ray structures of zinc beta-lactamases unraveled the coordination of the metal ions, but their mode of action remains unclear. Recently, enzymes in which one of the zinc ligands was mutated have been characterized and their catalytic activity against several beta-lactam antibiotics measured. A molecular modeling study of these enzymes was performed here to explain the catalytic activity of the mutants. Coordination around the zinc ions influences the way the tetrahedral intermediate is bound; any modification influences the first recognition of the substrate by the enzyme. For all the studied mutants, at least one of the interactions fails, inducing a loss of catalytic efficiency compared to the wild type. The present studies show that the enzyme cavity is a structure of high plasticity both structurally and mechanistically and that local modifications may propagate its effects far from the mutated amino acid.

The VIM metallo-beta-lactamases are emerging resistance determinants, encoded by mobile genetic elements, that have recently been detected in multidrug-resistant nosocomial isolates of Pseudomonas aeruginosa and other Gram-negative pathogens. In this work a T7-based expression system for overproduction of the VIM-2 enzyme by Escherichia coli was developed, which yielded approximately 80 mg of protein per litre of culture. The enzyme was mostly released into the medium, from which it was recovered at >99% purity by an initial ammonium sulphate precipitation followed by two chromatography steps, with almost 80% efficiency. Determination of kinetic parameters of VIM-2 under the same experimental conditions previously used for VIM-1 (the first VIM-type enzyme detected in clinical isolates, which is 93% identical to VIM-2) revealed significant differences in K(m) values and/or turnover rates with several substrates, including penicillins, cephalosporins and carbapenems. Compared with VIM-1, VIM-2 is more susceptible to inactivation by chelators, indicating that the zinc ions of the latter are probably more loosely bound. These data indicated that at least some of the amino acid differences between the two proteins have functional significance. Molecular modelling of the two enzymes identified some amino acid substitutions, including those at positions 223, 224 and 228 (in the BBL numbering), that could be relevant to the changes in catalytic behaviour.

Background: The stabilization of enzymes in the presence of substrates has been recognized for a long time. Quantitative information regarding this phenomenon is, however, rather scarce since the enzyme destroys the potential stabilizing agent during the course of the experiments. In this work, enzyme unfolding was followed by monitoring the progressive decrease of the rate of substrate utilization by the Staphylococcus aureus PC1 β-lactamase, at temperatures above the melting point of the enzyme. Results: Enzyme inactivation was directly followed by spectrophotometric measurements. In the presence of substrate concentrations above the K m values, significant stabilization was observed with all tested compounds. A combination of unfolding kinetic measurements and enzymatic studies, both under steady-state and non-steady-state regimes, allowed most of the parameters characteristic of the two concurrent phenomena (i.e. substrate hydrolysis and enzyme denaturation) to be evaluated. In addition, molecular modelling studies show a good correlation between the extent of stabilization, and the magnitude of the energies of interaction with the enzyme. Conclusions: Our analysis indicates that the enzyme is substantially stabilized towards heat-induced denaturation, independently of the relative proportions of non-covalent Henri–Michaelis complex (ES) and acyl–enzyme adduct (ES*). Thus, for those substrates with which the two catalytic intermediates are expected to be significantly populated, both species (ES and ES*) appear to be similarly stabilized. This analysis contributes a new quantitative approach to the problem.

The gene encoding the phosphoglycerate kinase (PGK) from the Antarctic Pseudomonas sp. TACII18 has been cloned and found to be inserted between the genes encoding for glyceraldhyde-3-phosphate dehydrogenase and fructose aldolase. The His-tagged and the native recombinant PGK from the psychrophilic Pseudomonas were expressed in Escherichia coli. The wild-type and the native recombinant enzymes displayed identical properties, such as a decreased thermostability and a 2-fold higher catalytic efficiency at 25 degrees C when compared with the mesophilic PGK from yeast. These properties, which reflect typical features of cold-adapted enzymes, were strongly altered in the His-tagged recombinant PGK. The structural model of the psychrophilic PGK indicated that a key determinant of its low stability is the reduced number of salt bridges, surface charges, and aromatic interactions when compared with mesophilic and thermophilic PGK. Differential scanning calorimetry of the psychrophilic PGK revealed unusual variations in its conformational stability for the free and substrate-bound forms. In the free form, a heat-labile and a thermostable domain unfold independently. It is proposed that the heat-labile domain acts as a destabilizing domain, providing the required flexibility around the active site for catalysis at low temperatures.

In a general approach to the understanding of protein adaptation to high temperature, molecular models of the closely related mesophilic Streptomyces sp. S38 Xyl1 and thermophilic Thermomonospora fusca TfxA family 11 xylanases were built and compared with the three-dimensional (3D) structures of homologous enzymes. Some of the structural features identified as potential contributors to the higher thermostability of TfxA were introduced in Xyl1 by site-directed mutagenesis in an attempt to improve its thermostability and thermophilicity. A new Y11-Y16 aromatic interaction, similar to that present in TfxA and created in Xyl1 by the T11Y mutation, improved both the thermophilicity and thermostability. Indeed, the optimum activity temperature (70 vs. 60 degrees C) and the apparent Tm were increased by about 9 degrees C, and the mutant was sixfold more stable at 57 degrees C. The combined mutations A82R/F168H/N169D/delta170 potentially creating a R82-D169 salt bridge homologous to that present in TfxA improved the thermostability but not the thermophilicity. Mutations R82/D170 and S33P seemed to be slightly destabilizing and devoid of influence on the optimal activity temperature of Xyl1. Structural analysis revealed that residues Y11 and Y16 were located on beta-strands B1 and B2, respectively. This interaction should increase the stability of the N-terminal part of Xyl1. Moreover, Y11 and Y16 seem to form an aromatic continuum with five other residues forming putative subsites involved in the binding of xylan (+3, +2, +1, -1, -2). Y11 and Y16 might represent two additional binding subsites (-3, -4) and the T11Y mutation could thus improve substrate binding to the enzyme at higher temperature and thus the thermophilicity of Xyl1.

A xylanase belonging to family 10 is produced by Cryptococcus adeliae, an Antarctic yeast that exhibits optimal growth at low temperature. The mature glycosylated xylanase secreted by C. adeliae is composed of 338 amino acid residues and 26 +/- 3 osidic residues, and shares 84% identity with its mesophilic counterpart from C. albidus. The xylanase from C. adeliae is less thermostable than its mesophilic homologue when the residual activities are compared, and this difference was confirmed by differential scanning calorimetry experiments. In the range 0 degrees-20 degrees C, the cold-adapted xylanase displays a lower activation energy and a higher catalytic efficiency. All these observations suggest a less compact, more flexible molecular structure. Analysis of computerized molecular models built up for both psychrophilic and mesophilic xylanases indicates that the adaptation to cold consists of discrete changes in the tridimensional structure: of 53 substitutions, 22 are presumably involved in the adaptation process. These changes lead mainly to a less compact hydrophobic packing, to the loss of one salt bridge, and to a destabilization of the macrodipoles of the helices.

The xyl1 gene encoding the Xyl1 xylanase of Streptomyces sp. strain S38 was cloned by screening an enriched DNA library with a specific DNA probe and sequenced. Three short 5 bp –CGAAA– sequences are located upstream of the Streptomyces sp. S38 xyl1 gene 105, 115 and 250 bp before the start codon. These sequences, named boxes 1, 2 and 3, are conserved upstream of the Actinomycetales xylanase genes and are specifically recognized by a DNA-binding protein (Giannotta et al., 1994. FEMS Microbiol. Lett. 142, 91–97) and could be probably involved in the regulation of xylanase production. The Xyl1 ORF encodes a 228 residue polypeptide and the Xyl1 preprotein contains a 38 residue signal peptide whose cleavage yields a 190 residue mature protein of calculated M r =20 585 and basic p I value of 9.12. The molecular mass of the produced and purified mature protein determined by mass spectrometry (20 586±1 Da) and its p I (9.8) agree with these calculated values. Its N-terminal amino-acid sequence confirmed the proposed cleavage site between the signal peptide and the mature protein. Comparisons between Xyl1 and the 62 other xylanases belonging to family 11 allowed the construction of a phylogenetic tree and revealed its close relationship with Actinomycetales enzymes. Moreover, nine residues were found to be strictly conserved among the 63 xylanases.

The addition of a poly-His C-terminal extension, designed to facilitate the purification of the protein, to the β-lactamase of a thermophilic Bacillus licheniformis strain modified the site of action of the signal peptidase. This resulted in the secretion of a protein with a different N-terminus, showing that this type of protein engineering might not always be as `neutral' as generally assumed.

The stability properties of six natural mutants of the TEM-1 β-lactamase have been studied. The glutamate to lysine substitution at positions 104 and 240 stabilize the enzyme. Conversely, the G238S mutant's decreased stability might reflect an altered conformation of the active site and thus be related to the modified substrate profile. The relative stability of the R164S and R164H mutants is explained by the formation of a hydrogen bond between these residues and Asp-179 conferring a somewhat different structure to the omega loop and thus also explaining the extended substrate profile of these mutants. The loss of stability of the R164H mutant with increasing pH values can be explained by the titration of a hydrogen bond between the Nδ of His-164 and the Oδ of Asp-179. The properties of the G238S+E104K double mutant which is the most active against third-generation cephalosporins result from a balance of destabilizing and stabilizing substitutions, and their effects seem to be additive. The behavior of the R164S + E240K mutant might be explained on the basis of a similar compensation phenomenon. © 1995 Wiley-Liss, Inc.

DD-peptidases and beta-lactamases share several common properties, including the formation of an acylenzyme intermediate in their catalytic pathways. In their interactions with beta-lactam antibiotics, the stability of this intermediate is much higher with the peptidases than with the beta-lactamases. The structural factors responsible for this difference have not been identified. The evolution of beta-lactamases is taking place before our eyes, since mutants are constantly selected which can hydrolyze the molecules newly introduced as "beta-lactamase resistant" in the chemotherapeutic arsenal.

The non-catalytic C-terminal regions of the N-acetylmuramidase (lysozyme) of Clostridium acetobutylicum and N-acetylmuramoyl(d-lactyl)-l-alanine amidases CwlA of Bacillus subtilis, ORFL3 and CwlL of Bacillus licheniformis were previously reported to have similarities with the amino acid sequence of the non-catalytic N-terminal module of the Streptomyces albus G Zn DD-peptidase. This peptidase is a bipartite protein of known three-dimensional structure. Its non-catalytic N-terminal module possesses, exposed at the surface, an elongated crevice which is defined by a loop-helix-loop-helix motif that consists of two repeats, each 16 amino acid residues long, connected by a heptapeptide and whose design is compatible with its possible functioning as a substrate recognition and binding site. Amino acid alignments suggest that cavities nearly identical in shape to that present in the non-catalytic module of the S. albus peptidase, are borne by the C-terminal regions of the CwlA amidase (in one copy), the lysozyme and the ORFL3 and CwlL amidases (in two copies). Since a common feature of the five enzymes is their substrate, the bacterial cell wall peptidoglycan, we interpret the striking similarity of their non-catalytic N- or C-terminal modules to suggest that these modules are involved in the binding of these exocellular enzymes to their insoluble wall substrate.

Several bicyclic imidazolidinones structurally-related to penicillins have been prepared from penam precursors. The compounds were compared to benzylpenicillin as active reference, using the methods of theoretical chemistry. Structures 7 and 8, in which the acyl group of the side-chain was anchored, via a "one-atom spacer", at position N-7 of the imidazolidinone ring, appeared as good penicillin mimics. However, they were found devoid of significant antibacterial activity.

The interactions between three class A beta-lactamases and compounds bearing a methoxy side chain on the alpha-face of the beta-lactam ring (cefoxitin, moxalactam and temocillin) have been studied. When compared with the situation prevailing with good substrates, both acylation and deacylation steps appeared to be severely impaired. Molecular modelling studies of the structures of the Henri-Michaelis complexes and of the acyl-enzymes indicate a major displacement of the crystallographically observed water molecule which connects the glutamate-166 and serine-70 side chains and underline the role of this water molecule in both reaction steps.

The importance of various residues in the Streptomyces R61 penicillin-sensitive DD-peptidase has been assessed by site-directed mutagenesis. The replacement of the active Ser62 by a Cys residue yielded an inactive protein which was also unable to recognize penicillin. The activity of the Lys65----Arg mutant with the peptide and thiolester substrates was decreased 100-200-fold and the rate of penicillin inactivation was decreased 20,000-fold or more. The mutant thus behaved as a poor, but penicillin-resistant, DD-peptidase. The other studied mutations, the mutations Phe58----Leu, Tyr90----Asn, Thr101----Asn, Phe164----Ala, Asp225----Glu and Asp225----Asn had little influence on the catalytic and penicillin-binding properties. The Asp225 mutants did not exhibit an increased sensitivity to cefotaxime. The Phe164----Ala mutant was significantly more unstable than the wild-type enzyme.

Different hypotheses of the structure of platelet-activating factor (PAF) receptor based on structure-activity relationships of agonists and antagonists are reviewed. For an agonistic effect, strong hydrophobic interactions and an ether function are required in position-1 of the glycerol backbone; chain length limitations and steric hindrance demand a small group in position-2. The unusual structural properties of non-PAF-like antagonists required 3-D electrostatic potential calculations. This method applied to seven potent antagonists suggests a strong "Cache-orielles" (ear-muff) effect, i.e., two strong electronegative wells (isocontour at -10 Kcal/mole) are located at 180 degrees to each other and at a relatively constant distance. Initial consideration of the "Cache-oreilles" effect implied the structure of a bipolarized cylinder of 10-12 A diameter for the receptor. However, very recent results on studies with agonists and antagonists structurally similar to PAF suggest that the receptor may in fact be a multi-polarized cylinder.

Nine simple and structurally flexible PAF antagonists were synthesized and their inhibitory effects on PAF induced platelet aggregation were measured. Compounds with PAF antagonistic activity exhibited a negative electrostatic potential generated by two trimethoxyphenyl groups (isocontour at −10 Kcal/mole) at various distances between the negative clouds. The optimal distance between the atoms generating the “cache-oreilles” system for exhibiting potent PAF antagonistic activity is estimated to be 11–13 A. In the flexible molecules studied, the dispersion of the electronic distribution is not necessarily favorable for anti-PAF activity. The data support the simple bipolarized model for the PAF receptor that has been proposed by the authors.

Optimization by energy minimization of stable complexes occurring along the pathway of hydrolysis of benzylpenicillin and cephalosporin C by the Streptomyces albus G beta-lactamase has highlighted a proton shuttle that may explain the catalytic mechanism of the beta-lactamases of class A. Five residues, S70, S130, N132, T235 and A237, are involved in ligand binding. The gamma-OH group of T235 and, in the case of benzylpenicillin, the gamma-OH group of S130 interact with the carboxylate group, on one side of the ligand molecule. The side-chain NH2 group of N132 and the carbonyl backbone of A237 interact with the exocyclic CONH amide bond, on the other side of the ligand. The backbone NH groups of S70 and A237 polarize the carbonyl group of the scissile beta-lactam amide bond. Four residues, S70, K73, S130 and E166, and two water molecules, W1 and W2, perform hydrolysis of the bound beta-lactam compound. E166, via W1, abstracts the proton from the gamma-OH group of S70. While losing its proton, the O-gamma atom of S70 attacks the carbonyl carbon atom of the beta-lactam ring and, concomitantly, the proton is delivered back to the adjacent nitrogen atom via W2, K73 and S130, thus achieving formation of the acyl-enzyme. Subsequently, E166 abstracts a proton from W1. While losing its proton, W1 attacks the carbonyl carbon atom of the S70 ester-linked acyl-enzyme and, concomitantly, re-entry of a water molecule W'1 replacing W1 allows E166 to deliver the proton back to the same carbonyl carbon atom, thus achieving hydrolysis of the beta-lactam compound and enzyme recovery. The model well explains the differences found in the kcat. values for hydrolysis of benzylpenicillin and cephalosporin C by the Streptomyces albus G beta-lactamase. It also explains the effects caused by site-directed mutagenesis of the Bacillus cereus beta-lactamase I [Gibson, Christensen & Waley (1990) Biochem J. 272, 613-619].

In order to compare electronic and conformational properties of PAF-agonists and PAF-antagonists, 14 analogues structurally related to PAF were studied. A common conformation of the glycerol backbone was present in all agonists and all constrained or flexible antagonists. The distinction between agonists and antagonists appears to be casted on position-2 where the folded conformation of the substituent for agonists should be the most probable. In position-3 the gauche conformation can be adopted by all the analysed compounds. The electrostatic potential well at − 30 kcal/mol stretches to the carbonyl group in position-2 in the folded conformation of the agonists. On the contrary, in constrained antagonists, a second negative zone appears around the carbamate group. Given the modelling results, the triethylammonium PAF analogue considered in literature as a weak agonist, was resynthesized and proved to be more potent than previously reported. These experimental results confirm our hypothesis in terms of a common conformation of agonist and antagonist PAF-like molecules.

The electronic properties of the active-sites of the structurally unrelated serine peptidases, alpha-chymotrypsin and subtilisin, have been expressed in the form of three-dimensional electrostatic potential maps derived from integrals calculated at the quantum chemistry level. As a consequence of the asymmetrical distribution of the secondary structures that occur within a 7 A sphere around the serine of the catalytic triad, the active sites are highly polarized entities and exhibit large dipole moments. One part of the active sites generates a nucleophilic suction-pump. Its isocontour at -10 kcal mol-1 defines an impressive, negatively-charged volume which bears a narrow channel in the immediate vicinity of the active-site serine 195 in alpha-chymotrypsin or 221 in subtilisin. In native alpha-chymotrypsin, there is a perfect complementation between this nucleophilic suction-pump and the positively-charged electrophilic hole that is generated by the backbone NH of Ser 195 and Gly 193. In subtilisin, generation of the complementing electrophilic hole requires binding of a carbonyl donor ligand and may be achieved by rotation of the side-chain amide of Asn 155 towards the backbone NH of Ser 221. Small variations in the atomic co-ordinates of alpha-chymotrypsin used for the calculations, the presence of water molecules in its active site and the occurrence of point mutations in the amino acid sequence of subtilisin have little effects on the shape and characteristics of the electrostatic potential.

beta-Lactamases are the main cause of bacterial resistance to penicillins, cephalosporins and related beta-lactam compounds. These enzymes inactivate the antibiotics by hydrolysing the amide bond of the beta-lactam ring. Class A beta-lactamases are the most widespread enzymes and are responsible for numerous failures in the treatment of infectious diseases. The introduction of new beta-lactam compounds, which are meant to be 'beta-lactamase-stable' or beta-lactamase inhibitors, is thus continuously challenged either by point mutations in the ubiquitous TEM and SHV plasmid-borne beta-lactamase genes or by the acquisition of new genes coding for beta-lactamases with different catalytic properties. On the basis of the X-ray crystallography structures of several class A beta-lactamases, including that of the clinically relevant TEM-1 enzyme, it has become possible to analyse how particular structural changes in the enzyme structures might modify their catalytic properties. However, despite the many available kinetic, structural and mutagenesis data, the factors explaining the diversity of the specificity profiles of class A beta-lactamases and their amazing catalytic efficiency have not been thoroughly elucidated. The detailed understanding of these phenomena constitutes the cornerstone for the design of future generations of antibiotics.

Dans l'arsenal de la chimiotherapie antibacterienne, les antibiotiques de la famille de la penicilline ou β-lactamines sont les plus largement utilises, en raison de leur activite elevee et de leur absence presque totale d'effets secondaires. Les bacteries ont cependant developpe des mecanismes de resistance efficaces reposant sur differents facteurs genetiquement independants: une diminution de la sensibilite des cibles, des DD-peptidases ancrees a la face externe de la membrane cytoplasmique, la production d'enzymes qui catalysent la destruction de l'antibiotique et, chez les bacteries a Gram - et les mycobacteries, la presence d'une barriere de permeabilite qui ralentit la diffusion de l'antibiotique vers ses cibles. Des mecanismes actifs d'expulsion de l'antibiotique peuvent aussi se rencontrer. Les diverses strategies imaginees pour contrer cette resistance entrainent des reponses bacteriennes d'une remarquable diversite. Une lutte rationnelle contre les especes pathogenes demande une comprehension de ces phenomenes qui integre la microbiologie, la genetique moleculaire, l'enzymologie, l'analyse structurale des proteines impliquees et l'etude des reactions qu'elles catalysent par les methodes de la chimie theorique.

Several types of active-site-directed inactivators (inhibitors) of the Zn2+-containing D-alanyl-D-alanine-cleaving carboxypeptidase were tested. (i) Among the heavy-atom-containing compounds examined, K2Pt(C2O4)2 inactivates the enzyme with a second-order rate constant of about 6 X 10(-2)M-1 X S-1 and has only one binding site located close to the Zn2+ cofactor within the enzyme active site. (ii) Several compounds possessing both a C-terminal carboxylate function and, at the other end of the molecule, a thiol, hydroxamate or carboxylate function were also examined. 3-Mercaptopropionate (racemic) and 3-mercaptoisobutyrate (L-isomer) inhibit the enzyme competitively with a Ki value of 5 X 10 X 10(-9)M. (iii) Classical beta-lactam compounds have a very weak inhibitory potency. Depending on the structure of the compounds, enzyme inhibition may be competitive (and binding occurs to the active site) or non-competitive (and binding causes disruption of the protein crystal lattice). (iv) 6-beta-Iodopenicillanate inactivates the enzyme in a complex way. At high beta-lactam concentrations, the pseudo-first-order rate constant of enzyme inactivation has a limit value of 7 X 10(-4)S-1 X 6-beta-Iodopenicillanate binds to the active site just in front of the Zn2+ cofactor and superimposes histidine-190, suggesting that permanent enzyme inactivation is by reaction with this latter residue.

La determination de la structure cristalline du benzisoselenazole-1,2 et du benzisotellurazole-1,2 a permis d'expliquer les proprietes physiques inattendues (point de fusion et solubilite) du dernier compose. Les anomalies observees resultent de l'existence, dans I'empilement du derive tellure, de liaisons intermoleculaires Te … N extrěmement courtes (2.4 A). Anomalous physical properties (solubility and melting point) of 1,2-benzisotellurazole are explained by very short intermolecufar Te…N bonds (2.4 A) found in the crystal structure. Such bonds are not present in the crystal structure of 1,2-benzisoselenazole and the physical properties are those expected.

The electrostatic interaction energy between methanol and the dyad water-imidazole has been computed numerically at three levels of approximation from 3D grids of the charge density of one partner and the electrostatic potential of the other. The minimum positions and energy values thus obtained compare well with those calculated analytically. The numerical procedure is especially interesting for the prediction of the stable conformers.