Search

SARS-CoV-2 receptor-binding domain (RBD) protein was captured and purified through a simple and inexpensive methodology using citrate-coated magnetic iron oxide nanoparticles in the first step of the process.

Cellulose is a structural linear polysaccharide that is naturally produced by plants and bacteria, making it the most abundant biopolymer on Earth. The hierarchical structure of cellulose from the nano- to microscale is intimately linked to its biosynthesis and the ability to process this sustainable resource for materials applications. Despite this, the morphology of bacterial cellulose microfibrils and their assembly into higher order structures, as well as the structural origins of the alternating crystalline and disordered supramolecular structure of cellulose, have remained elusive. In this work, we employed high-resolution transmission electron and atomic force microscopies to study the morphology of bacterial cellulose ribbons at different levels of its structural hierarchy and provide direct visualization of nanometer-wide microfibrils. The non-persistent twisting of cellulose ribbons was characterized in detail, and we found that twists are associated with nanostructural defects at the bundle and microfibril levels. To investigate the structural origins of the persistent disordered regions that are present along cellulose ribbons, we employed a correlative super-resolution light and electron microscopy workflow and observed that the disordered regions that can be seen in super-resolution fluorescence microscopy largely correlated with the ribbon twisting observed in electron microscopy. Unraveling the hierarchical assembly of bacterial cellulose and the ultrastructural basis of its disordered regions provides insights into its biosynthesis and susceptibility to hydrolysis. These findings are important to understand the cell-directed assembly of cellulose, develop new cellulose-based nanomaterials, and develop more efficient biomass conversion strategies.

Seven copolymers of maleic anhydride were hydrolyzed and impregnated into sheets of bleached softwood kraft pulps to enhance market pulp properties. Drying the impregnated pulps at 120 °C for 10 minutes, attached to the fiber surfaces up 0.16 meq of carboxyl groups per gram of dry pulp. Heating the impregnated pulps regenerates succinic anhydride moieties which can then form stable ester linkages with cellulosic hydroxyls. The pH of the impregnation solution is important. Impregnation with solutions at pH 8 gave polymer contents without repulping issues. By contrast, impregnation at pH 4 gave dried pulp sheets that were too strong to enable repulping in a paper mill. Although most of the seven copolymers were fixed to cellulose, poly(ethylene-alt-maleic anhydride) gave the highest density of carboxyl groups. The simplicity of waterborne polymers and mild drying temperatures suggests maleic anhydride copolymer treatment could be implemented in a conventional market pulp mill.

Structured hydrogel sheets offer the potential to mimic the mechanics and morphology of native cell environments in vitro; however, controlling the morphology of such sheets across multiple length scales to give cells consistent multi-dimensional cues remains challenging. Here, we demonstrate a simple two-step process based on sequential electrospinning and thermal wrinkling to create nanocomposite poly(oligoethylene glycol methacrylate)/cellulose nanocrystal hydrogel sheets with a highly tunable multi-scale wrinkled (micro) and fibrous (nano) morphology. By varying the time of electrospinning, rotation speed of the collector, and geometry of the thermal wrinkling process, the hydrogel nanofiber density, fiber alignment, and wrinkle geometry (biaxial or uniaxial) can be independently controlled. Adhered C2C12 mouse myoblast muscle cells display a random orientation on biaxially wrinkled sheets but an extended morphology (directed preferentially along the wrinkles) on uniaxially wrinkled sheets. While the nanofiber orientation had a smaller effect on cell alignment, parallel nanofibers promoted improved cell alignment along the wrinkle direction while perpendicular nanofibers disrupted alignment. The highly tunable structures demonstrated are some of the most complex morphologies engineered into hydrogels to-date without requiring intensive micro/nanofabrication approaches and offer the potential to precisely regulate cell-substrate interactions in a “2.5D” environment (i.e. a surface with both micro- and nano-structured topographies) for in vitro cell screening or in vivo tissue regeneration. Statement of significance While structured hydrogels can mimic the morphology of natural tissues, controlling this morphology over multiple length scales remains challenging. Furthermore, the incorporation of secondary morphologies within individual hydrogels via simple manufacturing techniques would represent a significant advancement in the field of structured biomaterials and an opportunity to study complex cell-biomaterial interactions. Herein, we leverage a two-step process based on electrospinning and thermal wrinkling to prepare structured hydrogels with microscale wrinkles and nanoscale fibers. Fiber orientation/density and wrinkle geometry can be independently controlled during the electrospinning and thermal wrinkling processes respectively, demonstrating the flexibility of this technique for creating well-defined multiscale hydrogel structures. Finally, we show that while wrinkle geometry is the major determinant of cell alignment, nanofiber orientation also plays a role in this process.

Heating bleached kraft pulps treated with poly(ethylene-alt-maleic acid) (PEMAc) can lead to high yields of carboxylated polymer grafted to fibers. However, in many cases, the cured, dry pulp cannot be effectively repulped (redispersed in water) because the wet strength is too high. Impregnation with PEMAc solutions at pH 4 followed by high temperature (120-180 °C), catalyst-free curing for short times can give fixation yields >85% while maintaining repulpability. The combination of high fixation yields with low wet strength is possible because the extent of curing required for high grafting yields is less than the curing requirement for high wet strength. Two challenges in moving this technology to practicable applications are (1) identifying the optimum laboratory pulp curing conditions and (2) translating laboratory curing conditions to industrial processes. A modeling tool was developed to meet these challenges. The model is based on the observation that for curing conditions giving high fixation yields the wet tensile indices of grafted pulp sheets showed a power-law dependence on the βΓ product where β is the conversion of the succinic acid moieties in PEMAc to the corresponding succinic anhydride groups in the curing step and Γ is the amount of polymer applied to the pulp. For two PEMAc molecular weights and two pulp types, the power-law slopes were 0.6; however, the pre-exponential terms depended upon the specific polymer and pulp type combination. We propose that the relationships between the wet tensile index and βΓ, from polymer-treated, laboratory pulp handsheets, can be used to predict if proposed curing conditions for larger-scale processes will produce a repulpable product.

The ability to provide high sensitivity with small footprints makes miniaturized electrodes key components of biosensing, wearable electronics and lab‐on‐a‐chip devices. Recently, thin film deposition onto polystyrene films, followed by thermal shrinking has been used to produce microstructured electrodes (MSEs) with high electroactive surface area (ESA). Nevertheless, the high cost associated with film deposition through evaporation used in microfabrication and the variability in performance of screen‐printed electrodes (SPEs) remain key barriers that limit their widespread deployment. Here, a simple and inexpensive method is developed for the solution‐based patterning of high‐quality metallic films on polystyrene substrates for MSE fabrication. The ESA of electrodes produced through this method is 2 × and 12 × larger than that of microstructured and planar electrodes produced through sputtering, respectively, and their cost is only 20% of sputtered ones. This methodology allows the fabrication of on‐chip microstructured electrochemical cells (SMECs) with excellent analytical performance (3% RSD inter‐day reproducibility and 0.3% RSD repeatability), superior to that of commercially available SPEs. In addition, the ESA of SMECs is significantly higher than that of SPEs, and they show excellent response toward dopamine detection. We anticipate that this solution‐based fabrication approach will expedite the development of miniaturized sensing platforms for point‐of‐care applications.

The visualization of naturally derived cellulose nanofibrils (CNFs) and nanocrystals (CNCs) within nanocomposite materials is key to the development of packaging materials, tissue culture scaffolds, and emulsifying agents, among many other applications. In this work, we develop a versatile and efficient two-step approach based on triazine and azide-alkyne click-chemistry to fluorescently label nanocelluloses with a variety of commercially available dyes. We show that this method can be used to label bacterial cellulose fibrils, plant-derived CNFs, carboxymethylated CNFs, and CNCs with Cy5 and fluorescein derivatives to high degrees of labeling using minimal amounts of dye while preserving their native morphology and crystalline structure. The ability to tune the labeling density with this method allowed us to prepare optimized samples that were used to visualize nanostructural features of cellulose through super-resolution microscopy. The efficiency, cost-effectiveness, and versatility of this method make it ideal for labeling nanocelluloses and imaging them through advanced microscopy techniques for a broad range of applications.

Antifouling polymer coatings that are simple to manufacture are crucial for the performance of medical devices such as biosensors. "Grafting-to", a simple technique where presynthesized polymers are immobilized onto surfaces, is commonly employed but suffers from nonideal polymer packing leading to increased biofouling. Herein, we present a material prepared via the grafting-to method with improved antifouling surface properties and intrinsic localized surface plasmon resonance (LSPR) sensor capabilities. A new substrate shrinking fabrication method, Graft-then-Shrink, improved the antifouling properties of polymer-coated Au surfaces by altering graft-to polymer packing while simultaneously generating wrinkled Au structures for LSPR biosensing. Thiol-terminated, antifouling, hydrophilic polymers were grafted to Au-coated prestressed polystyrene (PS) followed by shrinking upon heating above the PS glass transition temperature. Interestingly, the polymer molecular weight and hydration influenced Au wrinkling patterns. Compared to Shrink-then-Graft controls, where polymers are immobilized post shrinking, Graft-then-Shrink increased the polymer content by 76% in defined footprints and improved the antifouling properties as demonstrated by 84 and 72% reduction in macrophage adhesion and protein adsorption, respectively. Wrinkled Au LSPR sensors had sensitivities of ∼200-1000 Δλ/ΔRIU, comparing favorably to commercial LSPR sensors, and detected biotin-avidin and desthiobiotin-avidin complexation in a concentration-dependent manner using a standard plate reader and a 96-well format.

The unique soft and elastic nature of stretchable electronics has potential to advance wearable devices as human-machine interfaces. The integration of wireless power and data communication technology into stretchable electronics, which could be realised by inductive coupling and oscillator circuits, is key to achieve continuous monitoring of body signals with minimally invasive devices. As one of the main components for inductive coupling and oscillator circuits, the development of stretchable inductors is therefore compelling. The most common strategy to fabricate stretchable inductors is to add periodic waves to a spiral conductor, which provides mechanical robustness but inevitably increases resistance. In this work, we introduce a method to fabricate stretchable inductors, which relies on creating a wrinkled thin film inductor on a polystyrene substrate, functionalizing the inductor surface with an adhesive layer, and then transferring the structure onto a polydimethylsiloxane (PDMS) elastomer. Contrary to inductors created through the addition of periodic wave patterns, the wrinkled inductor features low resistance while providing high stretchability. The wrinkled inductors fabricated using this approach exhibited 30% decrease in resistance compared to their flat counterparts of the same size and geometry. Resistance and inductance under uniaxial stretching remained unchanged up to 45% strain, revealing exceptional electrical and mechanical stability. The strong chemical bonding between the functionalized wrinkled inductor and the PDMS elastomer contributes to the robustness and long-term stability of the device. This method provides an added advantage of miniaturization of the stretchable inductor, as it is shrunk to 16% of its original size during the wrinkling process. This technology has potential for building high performance stretchable inductors for stretchable wireless electronic devices and can eventually benefit the design of electronics for implants, health care monitoring and wearable communication.

To engineer tunable thin-film materials, the accurate measurement of their mechanical properties is crucial. However, characterizing the elastic modulus with current methods is particularly challenging for sub-micrometer thick films and hygroscopic materials because they are highly sensitive to environmental conditions and most methods require free-standing films which are difficult to prepare. In this work, we directly compared three buckling-based methods to determine the elastic moduli of supported thin films: (1) biaxial thermal shrinking, (2) uniaxial thermal shrinking, and (3) the mechanically compressed, strain-induced elastic buckling instability for mechanical measurements (SIEBIMM) method. Nanobiocomposite model films composed of cellulose nanocrystals (CNCs) and polyethyleneimine (PEI) were assembled using layer-by-layer deposition to control composition and thickness. The three buckling-based methods yielded the same trends and comparable values for the elastic moduli of each CNC-PEI film composition (ranging from 15 to 44 GPa, depending on film composition). This suggests that the methods are similarly effective for the quantification of thin-film mechanical properties. Increasing the CNC content in the films statistically increased the modulus; however, increasing the PEI content did not lead to significant changes. For the CNC-PEI system, the standard deviation of elastic moduli determined from SIEBIMM was 2-4 times larger than that for thermal shrinking, likely due to extensive cracking due to the different stress applied to the film when subjected to compression of a relaxed substrate versus the shrinking of a pre-strained substrate. These results show that biaxial thermal shrinking is a reliable method for the determination of the mechanical properties of thin films with a simple implementation and analysis and low sensitivity to small deviations in the input parameter values, such as film thickness or substrate modulus.

Decellularization efforts must balance the preservation of the extracellular matrix (ECM) components while eliminating the nucleic acid and cellular components. Following effective removal of nucleic acid and cell components, decellularized ECM (dECM) can be solubilized in an acidic environment with the assistance of various enzymes to develop biological scaffolds in different forms, such as sheets, tubular constructs, or three-dimensional (3D) hydrogels. Each organ or tissue that undergoes decellularization requires a distinct and optimized protocol to ensure that nucleic acids are removed, and the ECM components are preserved. The objective of this study was to optimize the decellularization process for dECM isolation from human lung tissues for downstream 2D and 3D cell culture systems. Following protocol optimization and dECM isolation, we performed experiments with a wide range of dECM concentrations to form human lung dECM hydrogels that were physically stable and biologically responsive. The dECM based-hydrogels supported the growth and proliferation of primary human lung fibroblast cells in 3D cultures. The dECM is also amenable to the coating of polyester membranes in Transwell™ Inserts to improve the cell adhesion, proliferation, and barrier function of primary human bronchial epithelial cells in 2D. In conclusion, we present a robust protocol for human lung decellularization, generation of dECM substrate material, and creation of hydrogels that support primary lung cell viability in 2D and 3D culture systems

The increased consumer demand for flexible and wearable electronic devices has inspired researchers to explore new methods to fabricate low-cost, robust, and intrinsically stretchable conductive ma...

The fabrication, thickness, and structure of aerogel films composed of covalently cross-linked cellulose nanocrystals (CNCs) and poly(oligoethylene glycol methacrylate) (POEGMA) were optimized for use as electrolyte absorbers in dye-sensitized solar cells (DSSCs). The aerogel films were cast directly on transparent conducting counter electrode substrates (glass and flexible poly(ethylene terephthalate) plastic) and then used to absorb drop-cast liquid electrolyte, thus providing an alternative method of filling electrolyte in DSSCs. This approach eliminates the use of electrolyte-filling holes, which are a typical pathway of electrolyte leakage, and furthermore enables a homogeneous distribution of electrolyte components within the photoelectrode. Unlike typical in situ electrolyte gelation approaches, the phase inversion method used here results in a highly porous (>99%) electrolyte scaffold with excellent ionic conductivity and interfacial properties. DSSCs prepared with CNC-POEGMA aerogels reached similar power conversion efficiencies as compared to liquid electrolyte devices, indicating that the aerogel does not interfere with the operation of the device. These aerogels retain their structural integrity upon bending, which is critical for their application in flexible devices. Furthermore, the aerogels demonstrate impressive chemical and mechanical stability in typical electrolyte solvents because of their stable covalent cross-linking. Overall, this work demonstrates that the DSSC fabrication process can be simplified and made more easily upscalable by taking advantage of CNCs, being an abundant and sustainable bio-based material.

With the advent of polymyxin B (PmB) resistance in bacteria, the mechanisms for mcr-1 resistance are of crucial importance in the design of novel therapeutics. The mcr-1 phenotype is known to decrease membrane charge and increase membrane packing by modification of the bacterial outer membrane. We used X-ray diffraction, Molecular Dynamics simulations, electrochemistry, and leakage assays to determine the location of PmB in different membranes and assess membrane damage. By varying membrane charge and lipid tail packing independently, we show that increasing membrane surface charge promotes penetration of PmB and membrane damage, whereas increasing lipid packing decreases penetration and damage. The penetration of the PmB molecules is well described by a phenomenological model that relates an attractive electrostatic and a repulsive force opposing insertion due to increased membrane packing. The model applies well to several gram-negative bacterial strains and may be used to predict resistance strength., Adree Khondker et al. identify new mechanisms by which the membrane surface and lipid packing in the bacterial membrane control the penetration of antibiotics such as of polymyxin B. These findings indicate that biophysical factors might influence the resistance strength of bacteria to antibiotics.

Traditional preparative methods for silicone elastomers center on platinum and tin-based cure chemistries. There is a need, for environmental and cost reasons, to find routes to silicones that do not require the use of heavy metals which remain in the elastomer after cure. This work describes dithioacetal silicone networks, which readily form between thiol-modified silicone monomers and polymers and aromatic aldehydes in the presence of acids, and do not require metal catalysts. Both chemical and physical crosslinks were utilized to independently manipulate elastomer properties. Subtle differences in the aromatic aldehyde used to crosslink the silicone led to large changes in modulus, due to differences in network structure. Using these associations, it was possible to tailor the silicone mechanical properties from very soft gels to much more rigid elastomers. The products were very stable to both hydrolytic and thermal stress, which was surprising given the normal susceptibility of silicones to acid-catalyzed reactions. The use of thioacetalization of readily available aromatic aldehydes as an alternative, metal free, organic cure provides an attractive route to polymer property optimization.

For many applications, it is imperative that changes in polymer surface topography, especially periodic patterns, can be triggered on command by a well-defined remote signal. In this contribution, we report a light-induced cascade of changes in wrinkling wavelengths on thin polymer layers supported by an elastomeric substrate under tensile stress. Through the applied supramolecular design, the effect of varying the ratio of light-active and light-passive components can be easily assessed, and it is shown that both the cascade type as well as the rate of the progress of the dynamic light-induced changes can be tuned by this ratio as well as by the light intensity. Furthermore, for the reported phenomena to occur, nominally only every 20th polymer repeat unit needs to be occupied by a chromophore, which makes the conversion of the sub-nanometer photoisomerization reaction into 10 μm scale changes of periodic surface patterns extremely efficient.

International audience; Thermoresponsive hydrogels present unique properties, such as tunable mechanical performance or changes involume, which make them attractive for applications including wound healing dressings, drug delivery vehicles, and implants, among others. This work reports the implementation of bioinspired thermoresponsive hydrogels composed of xyloglucan (XG) and cellulose nanocrystals (CNCs). Starting from tamarind seed XG (XGt), Thermoresponsive XG was obtained by enzymatic degalactosylation (DG-XG), which reduced the galactose residue content by ∼50% and imparted a reversible thermal transition. XG with native composition and comparable molar mass to DG-XG was produced by an ultrasonication treatment (XGu) for a direct comparison of behavior. The hydrogels were prepared by simple mixing of DG-XG or XGu with CNCs in water. Phase diagrams were established to identify the ratios of DG-XG or XGu to CNCs that yielded a viscous liquid, a phase-separated mixture, a simplegel, or a thermoresponsive gel. Gelation occurred at a DG-XG or XGu to CNC ratio higher than that needed for the full surface coverage of CNCs and required relatively high overall concentrations of both components (tested concentrations up to 20 g/L XG and 30 g/L CNCs). This is likely a result of the increase in effective hydrodynamic volume of CNCs due to the formation of XGCNC complexes. Investigation of the adsorption behavior indicated that DG-XG formed a more rigid layer on CNCs compared to XGu. Rheological properties of the hydrogels were characterized, and a reversible thermal transition was found for DG-XG/CNC gels at 35 °C. This thermoresponsive behavior provides opportunities to apply this system widely, especially in the biomedical field, where the mechanical properties could be further tuned by adjusting the CNC content.

International audience; In nature, cells exist in three-dimensional (3D) microenvironments with topography, stiffness, surface chemistry, and biological factors that strongly dictate their phenotype and behavior. The cellular microenvironment is an organized structure or scaffold that, together with the cells that live within it, make up living tissue. To mimic these systems and understand how the different properties of a scaffold, such as adhesion, proliferation, or function, influence cell behavior, we need to be able to fabricate cellular microenvironments with tunable properties. In this work, the nanotopography and functionality of scaffolds for cell culture were modified by coating 3D printed materials (DS3000 and poly(ethylene glycol)diacrylate, PEG-DA) with cellulose nanocrystals (CNCs). This general approach was demonstrated on a variety of structures designed to incorporate macro- and microscale features fabricated using photopolymerization and 3D printing techniques. Atomic force microscopy was used to characterize the CNC coatings and showed the ability to tune their density and in turn the surface nanoroughness from isolated nanoparticles to dense surface coverage. The ability to tune the density of CNCs on 3D printed structures could be leveraged to control the attachment and morphology of prostate cancer cells. It was also possible to introduce functionalization onto the surface of these scaffolds, either by directly coating them with CNCs grafted with the functionality of interest or with a more general approach of functionalizing the CNCs after coating using biotin–streptavidin coupling. The ability to carefully tune the nanostructure and functionalization of different 3D-printable materials is a step forward to creating in vitro scaffolds that mimic the nanoscale features of natural microenvironments, which are key to understanding their impact on cells and developing artificial tissues.

International audience; Interactions between polysaccharides, specifically between cellulose and hemicelluloses like xyloglucan (XG), govern the mechanical properties of the plant cell wall. This work aims to understand how XG molecular weight (MW) and the removal of saccharide residues impact the elastic modulus of XG-cellulose materials. Layered sub-micrometer-thick films of cellulose nanocrystals (CNCs) and XG were employed to mimic the structure of the plant cell wall and contained either (1) unmodified XG, (2) low MW XG produced by ultrasonication (USXG), or (3) XG with a reduced degree of galactosylation (DGXG). Their mechanical properties were characterized through thermal shrinking-induced buckling. Elastic moduli of 19 +/- 2, 27 +/- 1, and 75 +/- 6 GPa were determined for XG-CNC, USXG-CNC, and DGXG-CNC films, respectively. The conformation of XG adsorbed on CNCs is influenced by MW, which impacts mechanical properties. To a greater degree, partial degalactosylation, which is known to increase XG self-association and binding capacity of XG to cellulose, increases the modulus by fourfold for DGXG-CNC films compared to XG-CNC. Films were also buckled while fully hydrated by using the thermal shrinking method but applying the heat using an autoclave; the results implied that hydrated films are thicker and softer, exhibiting a lower elastic modulus compared to dry films. This work contributes to the understanding of structure-function relationships in the plant cell wall and may aid in the design of tunable biobased materials for applications in biosensing, packaging, drug delivery, and tissue engineering.

To engineer tunable thin film materials, accurate measurement of their mechanical properties is crucial. However, characterizing the elastic modulus with current methods is particularly challenging for sub-micrometer thick films and hygroscopic materials because they are highly sensitive to environmental conditions and most methods require free-standing films which are difficult to prepare. In this work, we directly compared three buckling-based methods to determine the elastic moduli of supported thin films: 1) biaxial thermal shrinking, 2) uniaxial thermal shrinking, and 3) the mechanically compressed, strain-induced elastic buckling instability for mechanical measurements (SIEBIMM) method. Nanobiocomposite model films composed of cellulose nanocrystals (CNCs) and polyethyleneimine (PEI) were assembled using layer-by-layer deposition to control composition and thickness. The three buckling-based methods yielded the same trends and comparable values for the elastic moduli of each CNC-PEI film composition (ranging from 15 – 44 GPa, depending on film composition). This suggests that the methods are similarly effective for the quantification of thin film mechanical properties. Increasing the CNC content in the films statistically increased the modulus, however, increasing the PEI content did not lead to significant changes. The standard deviation of elastic moduli determined from SIEBIMM was 2-4 times larger than for thermal shrinking, likely due to extensive cracking and partial film delamination. In light of these results, biaxial thermal shrinking is recommended as the method of choice because it affords the simplest implementation and analysis and is the least sensitive to small deviations in the input parameter values, such as film thickness or substrate modulus.

The diffusion of membrane receptors is central to many biological processes, such as signal transduction, molecule translocation, and ion transport, among others; consequently, several advanced fluorescence microscopy techniques have been developed to measure membrane receptor mobility within live cells. The membrane-anchored receptor cluster of differentiation 14 (CD14) and the transmembrane toll-like receptor 2 (TLR2) are important receptors in the plasma membrane of macrophages that activate the intracellular signaling cascade in response to pathogenic stimuli. The aim of the present work was to compare the diffusion coefficients of CD14 and TLR2 on the apical and basal membranes of macrophages using two fluorescence-based methods: raster image correlation spectroscopy (RICS) and single particle tracking (SPT). In the basal membrane, the diffusion coefficients obtained from SPT and RICS were found to be comparable and revealed significantly faster diffusion of CD14 compared with TLR2. In addition, RICS showed that the diffusion of both receptors was significantly faster in the apical membrane than in the basal membrane, suggesting diffusion hindrance by the adhesion of the cells to the substrate. This finding highlights the importance of selecting the appropriate membrane (i.e., basal or apical) and corresponding method when measuring receptor diffusion in live cells. Accurately knowing the diffusion coefficient of two macrophage receptors involved in the response to pathogen insults will facilitate the study of changes that occur in signaling in these cells as a result of aging and disease.

There are increasing concerns about the danger that water-borne pathogens and pollutants pose to the public. Of particular importance are those that disrupt the plasma membrane, since loss of membrane integrity can lead to cell death. Currently, quantitative assays to detect membrane-disrupting (lytic) agents are done offsite, leading to long turnaround times and high costs, while existing colorimetric point-of-need solutions often sacrifice sensitivity. Thus, portable and highly sensitive solutions are needed to detect lytic agents for health and environmental monitoring. Here, a lipid-based electrochemical sensing platform is introduced to rapidly detect membrane-disrupting agents. The platform combines benchtop fabricated microstructured electrodes (MSEs) with lipid membranes. The sensing mechanism of the lipid-based platform relies on stacked lipid membranes serving as passivating layers that when disrupted generate electrochemical signals proportional to the membrane damage. The MSE topography, membrane casting and annealing conditions were optimized to yield the most reproducible and sensitive devices. We used the sensors to detect membrane-disrupting agents sodium dodecyl sulfate and Polymyxin-B within minutes and with limits of detection in the ppm regime. This study introduces a platform with potential for the integration of complex membranes on MSEs towards the goal of developing Membrane-on-Chip sensing devices.

International audience; Cellulose nanocrystals (CNCs) are rigid rodlike nanoparticles that are derived from natural cellulose. Their high surface area, mechanical strength, and noncytotoxicity have elicited interest in their use for various applications, including composite and construction materials, cosmetic, food, and biomedical products. However, few methods exist to control the morphology and dimensions of assembled CNC structures in the micrometer range. Here, we use water-in-oil droplet microfluidics to template uniform spherical CNC droplets in a nontoxic and sustainable manner. Subsequent evaporation of the water within the droplets promotes the chemical cross-linking of surface-modified CNCs, resulting in ultraporous and flexible micrometer-sized particles. Changing the size of the microfluidic channel or the concentration of the CNC suspension results in microparticles with tunable sizes. The microparticles swell in polar solvents, with larger swelling observed for microparticles fabricated from less-concentrated CNC suspensions. While swelling is pH-independent, it is impacted by ionic strength for microparticles with low cross-link densities. Scanning electron microscopy reveals that the microparticles have macropores and mesopores, supporting a large specific surface area. These porous microparticles have potential for a range of applications, such as drug delivery or sorption agents, or as biodegradable beads for use in cosmetic and food applications.

In nature, cells reside within an extracellular matrix (ECM) that provides biophysical and biochemical cues to direct cell development and behavior. Traditional methods for studying cells involve using in vitro models that are convenient and cost-effective, but often use two-dimensional supports that are poor mimics for three-dimensional natural cell microenvironments. In this work, a synthetic polyampholyte, p(APM-co-AA) [poly(N-(3-aminopropyl)methacrylamide hydrochloride-co-acrylic acid)], was coated onto prestressed polystyrene support films that were then thermally shrunken, which concomitantly induced self-cross-linking of the polyampholyte. The cross-linking process involved a two-step sequence of anhydride formation from pairs of adjacent acrylic acid units, followed by amide cross-linking through reaction with primary amines on other chains. Attenuated reflectance infrared spectroscopy (ATR-IR) confirmed the formation of anhydride and amide bonds during heating, and the cross-linked films remained...

The plant xylem is a preferred niche for some important bacterial phytopathogens, some of them encoding expansin proteins, which bind plant cell walls. Yet, the identity of the substrate for bacterial expansins within the plant cell wall and the nature of its interaction with it are poorly known. Here, we determined the localization of two bacterial expansins with differing isoelectric points (and with differing binding patterns to cell wall extracts) on plant tissue through in vitro fluorophore labeling and confocal imaging. Differential localization was observed, in which Exl1 from Pectobacterium carotovorum located into the intercellular spaces between xylem vessels and adjacent cells of the plant xylem, whereas EXLX1 from Bacillus subtilis bound cell walls of most cell types. In isolated vascular tissue, however, both PcExl1 and BsEXLX1 preferentially bound to tracheary elements over the xylem fibers, even though both are composed of secondary cell walls. Fluorescence correlation spectroscopy, employed to analyze the interaction of expansins with isolated xylem, indicates that binding is governed by more than one factor, which could include interaction with more than one type of polymer in the fibers, such as cellulose and hemicellulose or pectin. Binding to different polysaccharides could explain the observed reduction of cellulolytic and xylanolytic activities in the presence of expansin, possibly because of competition for the substrate. Our findings are relevant for the comprehensive understanding of the pathogenesis by P. carotovorum during xylem invasion, a process in which Exl1 might be involved.

The ability to tune the interfacial and functional properties of cellulose nanomaterials has been identified as a critical step for the full utilization of nanocellulose in the development of new materials. Here, we use triazine chemistry in a modular approach to install various functionalities and chemistries onto cellulose fibers and cellulose nanocrystals (CNCs). The surface modification is demonstrated in aqueous and organic media. Octadecyl, monoallyl-PEG, benzyl, and propargyl triazinyl derivatives were grafted onto cellulose/CNCs via aromatic nucleophilic substitution in the presence of base as hydrochloric acid scavenger. The covalent nature and degree of substitution of grafted aliphatic, polymeric, alkyne chains, and aromatic rings were characterized through Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, elemental analysis, and thermogravimetric analysis. In addition, AFM and DLS analysis showed minimal change in the geometry and individualized character of CNCs after...

Herein, we comprehensively investigate the internal morphology of fully injectable interpenetrating networks (IPNs) prepared via coextrusion of functionalized precursor polymer solutions based on thermoresponsive poly(N-isopropylacrylamide) (PNIPAM) and nonthermoresponsive poly(vinyl pyrrolidone) (PVP) by reactive mixing using kinetically orthogonal hydrazone and thiosuccinimide cross-linking mechanisms. Small-angle neutron scattering, probing both the full IPN as well as the individual constituent networks of the IPN using index-matching, suggests a partially mixed internal structure characterized by PNIPAM-rich domains entrapped in a clustered PVP-rich phase. This interpretation is supported by super-resolution fluorescence microscopy (direct stochastic optical reconstruction microscopy) measurements on the same gels on a different length scale, which show both the overall phase segregation typical of an IPN as well as moderate mixing of PNIPAM into the PVP-rich phase. Such a morphology is consistent with the kinetics of both gelation and phase separation in this in situ gelling system, in which gelation effectively traps a fraction of the PNIPAM in the PVP phase prior to full phase separation; by contrast, such interphase mixing is not observed in semi-IPN control hydrogels. This knowledge has significant potential for the design of an injectable hydrogel with internal morphologies optimized for particular biomedical applications.

The C 1s, O 1s, and N 1s X-ray absorption spectra of three lipid species, 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC), 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC), and 1,2-dioleoyl-3-trimethylammonium-propane (chloride salt) (DOTAP), have been recorded using transmission detection in a scanning transmission X-ray microscope. The spectra are presented on an absolute intensity scale (i.e., optical density per nm) to allow their use as reference standards for spectromicroscopic analysis of supported lipid bilayers. Examples of C 1s based spectromicroscopic mapping of saturated and unsaturated domains in dry lipid bilayers of DOPC and DSPC at several compositions are presented. The results are compared with fluorescence microscopy of the same area. Challenges for extending this work to studies of wet lipid bilayers interacting with antimicrobial peptides are discussed.

We prepared highly oriented, multi-lamellar stacks of human red blood cell (RBC) membranes applied on silicon wafers. RBC ghosts were prepared by hemolysis and applied onto functionalized silicon chips and annealed into multi-lamellar RBC membranes. High resolution X-ray diffraction was used to determine the molecular structure of the stacked membranes. We present direct experimental evidence that these RBC membranes consist of nanometer sized domains of integral coiled-coil peptides, as well as liquid ordered (lo) and liquid disordered (ld) lipids. Lamellar spacings, membrane and hydration water layer thicknesses, areas per lipid tail and domain sizes were determined. The common drug aspirin was added to the RBC membranes and found to interact with RBC membranes and preferably partition in the head group region of the lo domain leading to a fluidification of the membranes, i.e., a thinning of the bilayers and an increase in lipid tail spacing. Our results further support current models of RBC membranes as patchy structures and provide unprecedented structural details of the molecular organization in the different domains.

Implanted devices are prone to bacterial infections, which can result in implant loosening and device failure. Mitigating these infections is important to both implant stability and patient health. The development of antibacterial implant coatings can decrease the presence of bacterial colonies, reducing the risk for bacterial-dependent implant failure. Here, we show that electrospun polycaprolactone (PCL) fibers doped with silver nanoparticles (NPs) from a silver nitrate precursor have the potential to decrease the prevalence of Streptococcus pneumoniae while supporting osteoblast attachment and proliferation. An air plasma reduction method of PCL electrospun fibers was used to prepare fibers doped with silver NPs. Fibers were characterized using scanning electron microscopy and transmission electron microscopy for qualitative evaluation of NP distribution and quantitative analysis of fiber diameters. Antibacterial testing against S. pneumoniae was performed with successful inhibition observed after 24 h of exposure. In vitro testing was completed using Saos-2 cells and suggests that the negative surface charge has the potential to increase mammalian cell viability even in the presence of fibers containing NPs. In conclusion, this study describes a novel method to produce bioresorbable implant coatings with the ability to reduce bacterial infections surrounding the implant surface while remaining biocompatible to the host.

Although two-dimensional hydrogel thin films have been applied across many biomedical applications, creating higher dimensionality structured hydrogel interfaces would enable potentially improved and more biomimetic hydrogel performance in biosensing, bioseparations, tissue engineering, drug delivery, and wound healing applications. Herein, we present a new and simple approach to control the structure of hydrogel thin films in 2.5D. Hybrid suspensions containing cellulose nanocrystals (CNCs) and aldehyde- or hydrazide-functionalized poly(oligoethylene glycol methacrylate) (POEGMA) were spin-coated onto prestressed polystyrene substrates to form cross-linked hydrogel thin films. The films were then structured via thermal shrinking, with control over the direction of shrinking leading to the formation of biaxial, uniaxial, or hierarchical wrinkles. Notably, POEGMA-only hydrogel thin films (without CNCs) did not form uniform wrinkles due to partial dewetting from the substrate during shrinking. Topographical feature sizes of CNC-POEGMA films could be tuned across 2 orders of magnitude (from ∼300 nm to 20 μm) by varying the POEGMA concentration, the length of poly(ethylene glycol) side chains in the polymer, and/or the overall film thickness. Furthermore, by employing adhesive masks during the spin-coating process, structured films with gradient wrinkle sizes can be fabricated. This precise control over both wrinkle size and wrinkle topography adds a level of functionality that to date has been lacking in conventional hydrogel networks.

Funding Information: All the co‐authors acknowledge Dr. Ayodele Fatona with gratitude for the assistance with TGA measurements. This work was supported by the Academy of Finland (Decision Nos. 141481, 286713, and 309920). T.O. was partially supported through a Natural Sciences and Engineering Research Council of Canada Undergraduate Student Research Award (NSERC‐USRA). J.M.M. and E.D.C. are recipients of Early Researcher Awards from the Ontario Ministry of Research and Innovation and J.M.M. holds the Tier 2 Canada Research Chair in Micro‐ and Nanostructured Materials. Funding from NSERC through Discovery Grants to J.M.M. and E.D.C. is gratefully acknowledged. This research made use of instrumentation in the Canadian Centre for Electron Microscopy and Biointerfaces Institute at McMaster University. This work is part of the Academy of Finland Flagship Programme, Photonics Research, and Innovation (PREIN) (Decision No. 320 165). Publisher Copyright: © 2021 The Authors. Advanced Materials Interfaces published by Wiley-VCH GmbH Copyright: Copyright 2021 Elsevier B.V., All rights reserved. A key challenge in the development of materials for applications in the fields of opto- and nanoelectronics, catalysis, separation, and energy conversion is the ability to fabricate 3D inorganic semiconductive nanostructures in a precisely-controlled and cost-effective manner. This work describes the fabrication of 3D nanostructured TiO2 monoliths by coating ultraporous cross-linked cellulose nanocrystal (CNC) aerogel templates with TiO2 layers of controlled thickness via atomic layer deposition (ALD). Following calcination, the resulting hollow inorganic ultraporous 3D networks form the thinnest self-supporting semiconductive structure (7 nm) fabricated directly on a conductive substrate. The CNC-templated ALD–TiO2 electrodes are applied toward photoelectrochemical water splitting. The results show that a TiO2 coating as thin as 15 nm produces a maximum water splitting efficiency, resulting in materials savings and reduced fabrication time.

Capillary electrophoresis-mass spectrometry (CE-MS) represents a high efficiency microscale separation platform for untargeted profiling of polar/ionic metabolites that is ideal for volume-restricted biological specimens with minimal sample workup. Despite these advantages, the long-term stability of CE-MS remains a major obstacle hampering its widespread application in metabolomics notably for routine analysis of anionic metabolites under negative ion mode conditions. Herein, we report for the first time that commonly used ammonia containing buffers compatible with electrospray ionization (ESI)-MS can compromise the integrity of fused-silica capillaries via aminolysis of their outer polyimide coating. Unlike organic solvent swelling effects, this chemical process occurs under aqueous conditions that is dependent on ammonia concentration, buffer pH, and exposure time resulting in a higher incidence of capillary fractures and current errors during extended operation. Prevention of polyimide aminolysis is achieved by using weakly alkaline ammonia containing buffers (pH9) in order to preserve the tensile strength of the polyimide coated fused-silica capillary. Alternatively, less nucleophilic primary/secondary amines can be used as electrolytes without polyimide degradation, whereas chemically resistant polytetrafluoroethylene coating materials offer higher pH tolerance in ammonia. In this work, multisegment injection (MSI)-CE-MS was used as multiplexed separation platform for high throughput profiling of anionic metabolites when using optimized buffer conditions to prevent polyimide degradation. A diverse range of acidic metabolites in human urine were reliably measured by MSI-CE-MS via serial injection of seven urine samples within a single run, including organic acids, food-specific markers, microbial-derived compounds and over-the-counter drugs as their sulfate and glucuronide conjugates. This approach offers excellent throughput (5 min/sample) and acceptable intermediate precision (average CV ≈ 16%) with high separation efficiency as reflected analysis of 30 anionic metabolites following 238 repeated sample injections of human urine over 3 days while using a single nonisotope internal standard for data normalization. Careful optimization and rigorous validation of CE-MS protocols are crucial for developing a rapid, low cost, and robust screening platform for metabolomics that is amenable to large-scale clinical and epidemiological studies.

Complex multi-lamellar structures play a critical role in biological systems, where they are present as lamellar bodies, and as part of biological assemblies that control energy transduction processes. Multi-lamellar lipid layers not only provide interesting systems for fundamental research on membrane structure and bilayer-associated polypeptides, but can also serve as components in bioinspired materials or devices. Although the ability to pattern stacked lipid bilayers at the micron scale is of importance for these purposes, limited work has been done in developing such patterning techniques. Here, we present a simple and direct approach to pattern stacked supported lipid bilayers (SLBs) using polymer stencil lift-off and the electrostatic interactions between cationic and anionic lipids. Both homogeneous and phase-segregated stacked SLB patterns were produced, demonstrating that the stacked lipid bilayers retain lateral diffusivity. We demonstrate patterned SLB stacks of up to four bilayers, where fluorescence resonance energy transfer (FRET) and quenching was used to probe the interactions between lipid bilayers. Furthermore, the study of lipid phase behaviour showed that gel phase domains align between adjacent layers. The proposed stacked SLB pattern platform provides a robust model for studying lipid behaviour with a controlled number of bilayers, and an attractive means towards building functional bioinspired materials or devices.

Poly(dimethylsiloxane) (PDMS) has become the material of choice for fabricating microfluidic channels for lab-on-a-chip applications. Key challenges that limit the use of PDMS in microfluidic applications are its hydrophobic nature, and the difficulty in obtaining stable surface modifications. Although a number of approaches exist to render PDMS hydrophilic, they suffer from reversion to hydrophobicity and, frequently, surface cracking or roughening. In this study, we describe a one-step in-mould method for the chemical modification of PDMS surfaces, and its use to assess the ability of different surfactants to render PDMS surfaces hydrophilic. Thin films of ionic and non-ionic surfactants were patterned into an array format, transferred onto silicone pre-polymer, and subsequently immobilized onto the PDMS surface during vulcanization. The hydrophilicity of the resulting surfaces was assessed by contact angle measurements. The wettability was observed to be dependent on the chemical structure of the surfactants, their concentration and interactions with PDMS. The morphology of modified PDMS surfaces and their change after wetting and drying cycles were visualized using atomic force microscopy. Our results show that while all surfactants tested can render PDMS surfaces hydrophilic through the in-mould modification, only those modified with PEG-PDMS-PEG copolymer surfactants were stable over wetting/dying cycles and heat treatments. Finally, the in-mould functionalization approach was used to fabricate self-driven microfluidic devices that exhibited steady flow rates, which could be tuned by the device geometry. It is anticipated that the in-mould method can be applied to a range of surface modifications for applications in analytical separations, biosensing, cell isolation and small molecule discovery.

Polymyxin B (PmB) is a "last-line" antibiotic scarcely used due to its nephrotoxicity. However, the molecular basis for antibiotic nephrotoxicity is not clearly understood. We prepared kidney membrane analogs of detergent-susceptible membranes, depleted of cholesterol, and cholesterol enriched, resistant membranes. In both analogs, PmB led to membrane damage. By combining x-ray diffraction, molecular dynamics simulations, and electrochemistry, we present evidence for two populations of PmB molecules: peptides that lie flat on the membranes, and an inserted state. In cholesterol depleted membranes, PmB forms clusters on the membranes leading to an indentation of the bilayers and increase in water permeation. The inserted peptides formed aggregates in the membrane core leading to further structural instabilities and increased water intake. The presence of cholesterol in the resistant membrane analogs led to a significant decrease in membrane damage. Although cholesterol did not inhibit peptide insertion, it minimized peptide clustering and water intake through stabilization of the bilayer structure and suppression of lipid and peptide mobility.

Precise knowledge of the mechanical properties of emerging nanomaterials and nanocomposites is crucial to match their performance with suitable applications. While methods to characterize mechanical properties exist, they are limited by instrument sensitivity and sample requirements. For bio-based nanomaterials this challenge is exacerbated by the extreme dependence of mechanical properties on humidity. This work presents an alternative approach, based on polymer shrinking-induced wrinkling mechanics, to determine the elastic modulus of nanobiocomposite films in a humidity-independent manner. Layer-by-layer (LbL) films containing cellulose nanocrystals (CNCs) and water-soluble polymers were deposited onto pre-stressed polystyrene substrates followed by thermal shrinking, which wrinkled the films to give them characteristic topographies. Three deposition parameters were varied during LbL assembly: (1) polymer type (xyloglucan - XG, or polyethyleneimine - PEI); (2) polymer concentration (0.1 or 1 wt%); and (3) number of deposition cycles, resulting in 10-600 nm thick nanobiocomposite films with tuneable compositions. Fast Fourier transform analysis on electron microscopy images of the wrinkled films was used to calculate humidity-independent moduli of 70 ± 2 GPa for CNC-XG0.1, 72 ± 2 GPa for CNC-PEI0.1, and 32.2 ± 0.8 GPa for CNC-PEI1.0 films. This structuring method is straightforward and amenable to a wide range of supported thin films.

In recent years, efforts in the development of lab-on-a-chip (LoC) devices for point-of-care (PoC) applications have increased to bring affordable, portable, and sensitive diagnostics to the patients’ bedside. To reach this goal, research has shifted from using traditional microfabrication methods to more versatile, rapid, and low-cost options. This work focuses on the benchtop fabrication of a highly sensitive, fully transparent, and flexible poly (dimethylsiloxane) (PDMS) microfluidic (μF) electrochemical cell sensor. The μF device encapsulates 3D structured gold and platinum electrodes, fabricated using a shape-memory polymer shrinking method, which are used to set up an on-chip electrochemical cell. The PDMS to PDMS-structured electrode bonding protocol to fabricate the μF chip was optimized and found to have sufficient bond strength to withstand up to 100 mL/min flow rates. The sensing capabilities of the on-chip electrochemical cell were demonstrated by using cyclic voltammetry to monitor the adhesion of murine 3T3 fibroblasts in the presence of a redox reporter. The charge transfer across the working electrode was reduced upon cell adhesion, which was used as the detection mechanism, and allowed the detection of as few as 24 cells. The effective utilization of simple and low cost bench-top fabrication methods could accelerate the prototyping and development of LoC technologies and bring PoC diagnostics and personalized medicine to the patients’ bedside.

In this study, we extend imaging and modeling work that was done in Part I of this report for a pure cellulose substrate (filter paper) to more industrially relevant substrates (untreated and pretreated hardwood and switchgrass). Using confocal fluorescence microscopy, we are able to track both the structure of the biomass particle via its autofluorescence, and bound enzyme from a commercial cellulase cocktail supplemented with a small fraction of fluorescently labeled Trichoderma reseii Cel7A. Imaging was performed throughout hydrolysis at temperatures relevant to industrial processing (50°C). Enzyme bound predominantly to areas with low autofluorescence, where structure loss and lignin removal had occurred during pretreatment; this confirms the importance of these processes for successful hydrolysis. The overall shape of both untreated and pretreated hardwood and switchgrass particles showed little change during enzymatic hydrolysis beyond a drop in autofluorescence intensity. The permanence of shape along with a relatively constant bound enzyme signal throughout hydrolysis was similar to observations previously made for filter paper, and was consistent with a modeling geometry of a hollowing out cylinder with widening pores represented as infinite slits. Modeling estimates of available surface areas for pretreated biomass were consistent with previously reported experimental results. © 2014 Wiley Periodicals, Inc.