Search

Abstract The compounds and properties of açai pulp and Spirulina biomass may suggest complementary and synergistic potential when combined. The aim of this work was to develop sucrose-free and dye-free gummy candies enriched with mixtures of freeze-dried açai pulp (FDAP) and Spirulina biomass. Four formulations were prepared: F1, 3% FDAP and 1% Spirulina; F2, 1% FDAP and 3% Spirulina; F3, 2% FDAP and 2% Spirulina and C, 0% FDAP and 0% Spirulina. The nutritional and functional contents, texture properties, color parameters and sensory characteristics of the gummy candies were assessed. Compared with the control, formulation F2 had the greatest increase in protein content (16.3%), whereas formulation F1 presented the greatest increase in lipid content (2.0%) and the greatest increase in total phenolic content (0.254 mg GAE g−1). Although the texture properties and the color parameters were significantly influenced (p

The use of natural polymers has increased due to concern about environmental pollution caused by plastics and emerging pollutants from fossil fuels. In this context, polysaccharides from macroalgae and microalgae arise as natural and abundant resources for various biological, biomedical, and food applications. Different nanomaterials are produced from these polysaccharides to act as effective carriers in the food and pharmaceutical industry: drug and nutrient carriers, active compound encapsulation, and delivery of therapeutic agents to tumor tissues. Polysaccharides-based nanomaterials applied as functional ingredients incorporated into foods can improve texture properties and decrease the caloric density of food products. These nanostructures also present the potential for developing food packaging with antioxidant and antimicrobial properties. In addition, polysaccharides-based nanomaterials are biocompatible, biodegradable, and safe for medical practices to prevent and manage various chronic diseases, such as diabetes, obesity, and cardiovascular disease. In this sense, this review article addresses the use of algal polysaccharides for manufacturing nanomaterials and their potential applications in food and biomedical areas. In addition, the paper discusses the general aspects of algae as a source of polysaccharides, the nanomaterials produced from these polymers, as well as recent studies and the potential use of algal polysaccharides for industries.

(1) Background: The human microbiota is essential for maintaining a healthy body. The gut microbiota plays a protective role against pathogenic bacteria. Probiotics are live microorganisms capable of preventing and controlling gastrointestinal and balancing the immune system. They also aid in better nutrients and vitamins absorption. Examples of natural probiotic cultures are kefir and kombucha. (2) Methods: Therefore, the aim of this review was to address the beneficial properties of probiotic kefir and kombucha using a Boxplot analysis to search for scientific data in the online literature up to January 2024: (Latin American and Caribbean Health Sciences (LILACS), PubMed, Medical Literature Analysis (MED-LINE), Science Direct, Google Scholar/Google Academic, Bioline Inter-national and Springer Link). Boxplots showed the summary of a set of data “Index Terms—Keywords” on kefir and kombucha in three languages (English, Portuguese and Spanish). (3) Results: Google Scholar was the database with the highest number of articles found, when the search for the keywords used in the study (containing ~4 × 106–~4 million articles available). This was Followed by the Science Direct database, containing ~3 × 106–~3 million articles available, and the BVS databases—Biblioteca Virtual de Saúde (Virtual Health Library) e Lilacs, both containing a value of ~2 × 106–~2 million articles available. The databases containing the smallest number of articles found were Nutrients and Medline, both containing a value of ≤0.1 × 106–≤100 thousand articles. (4) Conclusions: Scientific studies indicate that kefir and kombucha certainly contain various functional properties, such as antimicrobial, antitumor, anticarcinogenic and immunomodulatory activity, in addition to having a microbiological composition of probiotic bacteria and yeasts. Kefir and kombucha represent key opportunities in the food and clinic/medical fields.

A significant research gap exists in investigating large-scale microalgae cultures exposed to outdoor conditions, with the addition of phytohormones using non-sterile growth media. Implementing these conditions is crucial for verifying the industrial viability of this strategy. This study aimed to evaluate the effect of indole-3-acetic acid (IAA) supplementation on Spirulina sp. LEB 18 cultures conducted indoors and outdoors in raceway bioreactors. The outdoor experiments were performed under uncontrolled environmental conditions. The indoor cultures were maintained within a thermostat-controlled chamber at a consistent temperature and lighting intensity. The outdoor experiments supplemented with IAA achieved a biomass concentration of 5.43 g L−1 and productivity of 173.9 mg L−1 d−1. These values increased 122.5% and 130.9% in biomass concentration and productivity, respectively, compared to the indoor experiments with the same supplementation. Moreover, roughly half of the biomass generated from outdoor cultivation with IAA consisted of carbohydrates (45%). Compared to indoor cultivation, this approach reduced production costs for biomass (55%) and lowered production costs for carbohydrates, proteins, and lipids by 86%, 44%, and 50%, respectively. The successful application of phytohormones in microalgae cultures, particularly under larger scale, nonsterile, and outdoor conditions, represents a significant advancement toward industrial implementation.

Carbohydrates or polysaccharides are the main products derived from photosynthesis and carbon fixation in the Calvin cycle. Compared to other sources, polysaccharides derived from microalgae are safe, biocompatible, biodegradable, stable, and versatile. These polymeric macromolecules present complex biochemical structures according to each microalgal species. In addition, they exhibit emulsifying properties and biological characteristics that include antioxidant, anti-inflammatory, antitumor, and antimicrobial activities. Some microalgal species have a naturally high concentration of carbohydrates. Other species can adapt their metabolism to produce more sugars from changes in temperature and light, carbon source, macro and micronutrient limitations (mainly nitrogen), and saline stress. In addition to growing in adverse conditions, microalgae can use industrial effluents as an alternative source of nutrients. Microalgal polysaccharides are predominantly composed of pentose and hexose monosaccharide subunits with many glycosidic bonds. Microalgae polysaccharides can be structural constituents of the cell wall, energy stores, or protective polysaccharides and cell interaction. The industrial use of microalgae polysaccharides is on the rise. These microorganisms present rheological and biological properties, making them a promising candidate for application in the food industry and agriculture. Thus, microalgae polysaccharides are promising sustainable alternatives for potential applications in several sectors, and the choice of producing microalgal species depends on the required functional activity. In this context, this review article aims to provide an overview of microalgae technology for polysaccharide production, emphasizing its potential in the food, animal feed, and agriculture sector.

Microalgae are used in flocculation processes because biopolymers are released into the culture medium. Microalgal cell growth under specific conditions (temperature, pH, luminosity, nutrients, and salinity) provides the production and release of exopolysaccharides (EPS). These biopolymers can be recovered from the medium for application as bioflocculants or used directly in cultivation as microalgae autoflocculants. The optimization of nutritional parameters, the control of process conditions, and the possibility of scaling up allow the production and industrial application of microalgal EPS. Therefore, this review addresses the potential use of EPS produced by microalgae in bioflocculation. The recovery, determination, and quantification techniques for these biopolymers are also addressed. Moreover, other technological applications of EPS are highlighted.

Microalgae and cyanobacteria are photosynthetic microorganisms capable of synthesizing several biocompounds, including polysaccharides with antioxidant, antibacterial, and antiviral properties. At the same time that the accumulation of biomolecules occurs, microalgae can use wastewater and gaseous effluents for their growth, mitigating these pollutants. The increase in the production of polysaccharides by microalgae can be achieved mainly through nutritional limitations, stressful conditions, and/or adverse conditions. These compounds are of commercial interest due to their biological and rheological properties, which allow their application in various sectors, such as pharmaceuticals and foods. Thus, to increase the productivity and competitiveness of microalgal polysaccharides with commercial hydrocolloids, the cultivation parameters and extraction/purification processes have been optimized. In this context, this review addresses an overview of the production, characterization, and potential applications of polysaccharides obtained by microalgae and cyanobacteria. Moreover, the main opportunities and challenges in relation to obtaining these compounds are highlighted.

Changes in nutritional and lighting conditions to obtain compounds of interest and biomass via microalgal cultures are among the main foci of studies in algal biotechnology. Growth medium supplementation using organic compounds, such as glycerol, is a promising approach for increasing biomass productivity and the viability of microalgal cultivation and adding value to byproducts of the biodiesel industry. In this study, the influence of crude glycerol on Spirulina sp. LEB 18 was investigated via culturing using different photoperiods, and its effect on biomass composition and cell growth was evaluated. The microalgae were subjected to three photoperiods (continuous light, 24:0; 12 h light and 12 h dark, 12:12; and no illumination, 0:24) and crude glycerol supplementation (2.5 g L−1); better productivity and biomass concentrations were obtained in cultures with a 12:12 photoperiod (28.36 mg L−1 h−1 and 1.24 g L−1, respectively). Under this condition, the highest protein yield was achieved (647.3 mg L−1, 52.2% w w−1), and the obtained biomass showed favorable characteristics for applications in animal feed enrichment.

The presence of emerging contaminants in water resources has been a global concern due to their environmental impact and effects on human and animal health. These compounds include pharmaceuticals and personal care products, pesticides, fire retardants, hormones, and plasticizers, among others. These contaminants are not completely removed during water and wastewater conventional treatment. Thus, alternative processes are necessary to face this issue. In this context, nanotechnology represents a promising strategy for the remediation of emerging contaminants. Nanostructured materials have highlighted properties, such as adsorption capacity and porosity, chemical stability, reactivity, mobility, and antimicrobial activity. The diversity of nanomaterials and the possibility of combining them contribute to their application in contaminant mitigation. Furthermore, they can be used in different removal techniques such as adsorption, and membrane filtration. Thus, this review article provides an overview and advances in the production and application of nanofiltration membranes and adsorbent nanomaterials for the treatment of effluents containing emerging pollutants.

Increasing interest in healthy habits has created the market for what is commonly called “superfoods.” The goal of this study was to explore Swiss consumers’ initial and final attitudes toward superfoods as well as their change in attitude toward those foods after being provided selected information. A questionnaire survey was conducted to explore the individual traits of the respondents. The attitudes were assessed at the beginning and end of the survey. Four multiple regression analyses were performed. The results showed that consumers perceiving superfoods’ health benefits and expressing an interest in organic foods were associated with initial and positive attitudes. These predictors remained significantly related to the positive attitude at the end of the survey. Sociodemographic predictors (age and place of residence) were significant factors, with older people and individuals who lived in urban centers showing a higher propensity to improve their attitudes toward superfoods. Individuals with lower perceptions about the benefits of superfoods being healthy and lower levels of cultural participation showed a negative attitude change. Given that this study aims to shed light on the variables that influence the behavior of Swiss consumers toward the superfoods trend, it fills a significant gap in the literature.

Abstract Microalgae are photosynthetic microorganisms whose composition and biomass production can be influenced by manipulating the cultivation conditions employed. However, few studies have evaluated the effects of various cultivation conditions in autotrophic and mixotrophic conditions. The present work aimed to evaluate the effects of cultivation conditions on the cell growth and biosynthesis of fatty acids (FAs) by microalgae of the genus Chlorella in autotrophic and mixotrophic cultivation. Evaluation of the effects of the conditions was performed using an experimental design methodology. The highest values of maximum biomass concentration (Xmax) and maximum biomass productivity (Pmax) were obtained in autotrophic cultures. Palmitic acid was the FA obtained at the highest concentration in both cultivation modes. The concentrations of polyunsaturated FAs (PUFAs) ranged from 12.2 to 41.2% in autotrophic cultures and from 11 to 34.3% in the mixotrophic cultures. The variables photoperiod and sodium bicarbonate concentration showed the greatest influence on the Xmax, Pmax, and PUFA concentration in autotrophic and mixotrophic cultivations, respectively. This study verified that the selection of conditions and mode of cultivation contribute to the production of microalgal biomass and FA biosynthesis.

The management of pain is a world health issue. Available painkillers induce undesired side effects and are sometimes inefficient. Spirulina biomass has promoted anti-inflammatory activity in preclinical and clinical trials. This work characterizes the antinociceptive properties of Spirulina platensis LEB-18 biomass (SP-LEB18) and their mechanisms of action. In the CFA model in mice, SP-LEB18 reduced paw edema and mechanical allodynia, confirming its anti-inflammatory action and showing its antinociceptive activity. Cytokines levels were evaluated by ELISA; SP-LEB18 promoted an increase of IL-10 levels and a reduction of TNF-α and IL-1β levels. SP-LEB18 promoted centrally mediated antinociception, as indicated by the tail flick test. When the same set of experiments was conducted with IL-10 knockout mice, the antinociception was still detected in the tail flick test, but not in the CFA model. Pretreatment with naloxone abolished the effect of SP-LEB18, demonstrating a pure antinociceptive action of Spirulina biomass via the opioid system.

The effects of a magnetic field (MF) on the cyanobacteria Limnospira indica PCC 8005 growth rate and biomass composition were investigated. A device to apply the MF during the cultivation was built and the cyanobacteria were exposed to a steady 11 mT transverse MF. The growth increased with MF application, and when it was applied for 1 h per day, 123% more biomass was produced than in the control group. The protein content in the biomass cultured under this condition increased, achieving 60.4 w/w, while the Chl-a increased by 326%. The MF application for 1 h per day was found to be more efficient than when applied continuously for 24 h per day, in addition to being more economical and sustainable. This study showed an inexpensive and non-toxic way to enhance biomass concentration, leading to amounts more than 100% higher than those obtained in the control group. Furthermore, the high protein content in the biomass gave us several possibilities to increase the nutritional value of food.

Abstract The biological assimilation of the sugars present in lignocellulosic residues has gained prominence since these residues are the most abundant and economic residues in nature. Thus, the objective of this work was to determine whether the use of D-xylose and L-arabinose as sources of carbon in Synechococcus nidulans and Spirulina paracas cultures affects the growth and production of proteins and carbohydrates. Kinetic growth parameters, pentose consumption, protein content and carbohydrates were evaluated. Synechococcus nidulans and Spirulina paracas consumed all concentrations of pentose used. The highest cellular concentration (1.37 g.L-1) and the highest protein productivity (54 mg.L-1.d-1) were obtained for Spirulina paracas, which was submitted to the addition of 38.33 mg.L-1 D-xylose and 1.79 mg.L-1 L-arabinose. The use of pentose promoted the accumulation of proteins for the studied microalgae. This is one of the first works to report protein bioaccumulation as a result of pentose addition.

Abstract Hydrophilic polymers can form hydrogels, which are able to absorb and retain as much water as one hundred times their weight. Polymers based on natural products have been drawing attention since they are biocompatible, biodegradable and nontoxic. The aims of this study were to produce and to characterize a biopolymer with superabsorbent properties from fish protein isolates. Hydrogels were produced from protein isolates from Whitemouth croaker processing wastes chemically modified. The extension of change in lysine residues, kinetics in water-uptake capacity, pH effect, ionic strength over the absorption of water by hydrogels and the behavior of the biopolymer when subject to successive hydration and dehydrations were investigated. Results showed that acid modified protein without ethanol treatment reached a maximum absorption of 103.25 gwater/gdry gel, while the same sample modified with ethanol reached 216.05 gwater/gdry gel.

Biosurfactant are surface active compounds with emulsifying capacity and are produced by microorganisms, and they may be affected by factors related to microbial cultivation, such as pH, salinity, incubation time, carbon and nitrogen sources. The aim of this work was to study the influence of the culture conditions on the production of biosurfactants by Phialemonium sp using agroindustrial wastes. The processing parameters of temperature, humidity and pH produced the most significant effects on the production of biosurfactant and emulsifying activity. The maximum concentration of biosurfactant obtained in this study was equivalent to a surface tension reduction of 8.5 mg L-1 surfactin commercial solution using wheat bran, pH of 4.5, and 0.5% of soybean oil added at 30°C. Under these conditions, 83.4 EU g-1 of emulsifying activity, 16.4 g L-1 of emulsifier index and 18.3 U g-1 lipolytic capacity were obtained.

ABSTRACT Spirulina is a microalgal genre that has the capacity to produce various bioproducts with applications in several areas including the energy sector. The study aimed to assess the ability of CO2 biofixation, biodiesel and other biocompounds production by Spirulina sp LEB 18 cultured in air-lift photobioreactor. The microalgae presented a rich macronutrient composition: protein (47.3%), carbohydrates (13.4%) and a high lipid content (32.7%) in a media with nitrogen reduction, CO2 using air-lift photobiorector. Furthermore, 160 mg.L.d-1 of CO2 was biofixed, generating a maximum biomass yield of 0.02 g.L.d-1. The lipids evaluated for biodiesel production presented a theoretical yield of 19.8% for in situ transesterification and 47.9% for conventional transesterification. The microalgal biomass has potential for producing biodiesel that can be applied instead or in mixture with traditional diesel fuel. The study of obtaining energy associated with the production of other high value-added biocompounds from the microalgal biomass is of high importance because in this way, the viability of biofuel production by this microorganism can be increased.

ABSTRACT This study aimed to evaluate the effect of Spirulina platensis and moderate exercise on oxidative stress and lipid profiles in the rats. Forty male Wistar rats were allocated to the following 10-week treatments, three times a week: exercise (E, 30 min swimming),S. platensis (SP, 26 mg/Kg); exercise andSpirulina (ES); and control (C). Outcomes were Thiobarbituric Acid Reactive Substances (TBARS) in serum and brain, and cholesterol and triglycerides (TG) in serum. Rats treated with exercise showed lower brain TBARS than the controls, mostly in association withS. platensis. In the groups E and ES, serum TBARS decreased after intervention. Compared with the controls, both E and ES prevented an increase in cholesterol and reduced triglycerides. Results demonstrated thatS. platensis enhanced the beneficial effect of exercise on oxidative stress and lipid profiles in rats, which might be a promising approach for treating metabolic syndrome in humans.

ABSTRACT Microalgae are efficient at using solar energy to turn CO2 and nutrients into biomass containing lipids, proteins, carbohydrates and other compounds that may be used to produce bioproducts for human and animal consumption and pharmaceutical use. The aim of this study was to assess the effect of the NaNO3 and NaCl concentration on the growth kinetics, the biomass composition and the ability to biofix CO2 using the microalga Spirulina sp. LEB 18. The assays were carried out according to a 22 central composite design (CCD) with different concentrations of NaNO3 (1.25, 1.88 and 2.50 g L-1) and NaCl (1.00, 15.0 and 30.0 g L-1). The assays were carried out in 2 L vertical tubular photobioreactors at 30°C, 12 h light/dark and an injection of 12.0% v/v of CO2 at 0.3 vvm. The best growing results (Xmax = 1.60 g L-1, Pmax = 0.109 g L-1 d-1, μmax = 0.208 d-1) and CO2 biofixation rate (197.4 mg L-1 d-1) were observed in the assay with 1.25 g L-1 NaNO3 and 1.00 g L-1 NaCl. Increasing the NaCl concentration produced biomass with a higher carbohydrate content, while increasing the NaNO3 concentration reduced the protein concentration. According to the results, in addition to using Spirulina as a source of protein, it can also be used as a source of carbohydrates and to biologically remove CO2 from the atmosphere.

The objective of this study was to extract poly(3-hydroxybutyrate) (PHB) from the microalgal biomass of Spirulina LEB 18 for the development of nanofibers by electrospinning method. Different extraction methods were tested. The maximum yield obtained was 30.1 ± 2%. It was possible to produce nanofibers with diameters between 826 ± 188 nm and 1,675 ± 194 nm. An increase in the nanofiber diameter occurred when a flow rate of 4.8 μL min-1 and a capillary diameter of 0.90 mm were used. The nanofibers produced had up to 34.4% of biomass additives, i.e., non-PHB materials. This can be advantageous, because it enables the conservation of microalgal biomass compounds with bioactive functions.

C-phycocyanin from Spirulina platensis was purified in aqueous two-phase systems (ATPS) of polyethylene glycol (PEG)/potassium phosphate, varying the molar mass of the PEG. Results using a full factorial design showed that an increase in the concentration of salt and decrease in the concentration of PEG caused an increment in the purification factor for all the ATPS studied. Optimization of the conditions of the purification was studied using a central composite rotatable design for each molar mass of PEG. The ATPS composed of 7% (w/w) PEG 1500 or 4% (w/w) PEG 8000 (g/gmol) and 23 or 22.5% (w/w) of phosphate resulted a purification factor of 1.6-fold for C-phycocyanin, with total and 57% recovery, respectively. Process conditions were optimized for the purification factor for the system with PEG 1500. The ATPS with 4% (w/w) PEG 4000 or 4% (w/w) PEG 6000 and 21% (w/w) phosphate resulted purification factors of 2.1 and 2.2-fold, recovering 100% and 73.5%, respectively of C-phycocyanin in the top phase.

Wheat flour is the most important raw material in the production of pasta. The production process consists of mixing water and flour, kneading, extrusion and drying. Oats and the microalga Spirulina platensis play a physiological role in the growth, development and maintenance of the human organism due to their high nutritional value. The aim of this study was to assess the technological and nutritional properties of dry pasta prepared with the addition of oatmeal and Spirulina platensis. The wheat flour was characterized and the effect of partial replacement by oatmeal and Spirulina platensis (Arthrospira platensis) was evaluated using response surface methodology (RSM). The mixtures were analysed for moisture, protein, ash, colour, particle size, falling number and alveography. The formulated pastas were dried and evaluated for moisture, colour, cooking test, acidity, proximate composition and amino acids. Generally, the addition of Spirulina platensis influenced the soluble solids content and colour of the pasta, while the oatmeal mainly affected the acid content. The oatmeal increased the values of crude protein and total dietary fibre (13.06%) when compared with the commercial pasta (2.40%) and may be considered as a source of fibre.

ABSTRACT The food, training, and health are crucial for a good performance in sports. Intense physical activity takes the athlete to maintain a very unstable balance between energy demand and consumption of nutrients. Spirulina microalga has a nutritional profile that renders it an ideal food supplement, because has high protein content, also contains vitamins, minerals, and pigments. In this context, the study aimed to develop, characterize and evaluate the stability of foods enhanced with Spirulina, which are intended for athletes. In this study, six different supplements were developed (electrolyte replenisher, muscle enhancer, and recovery supplement), without and with Spirulina. The electrolyte replenisher with Spirulina compared to the product without the microalga, showed an increase of 0.35% (w/w) in mineral content. The carbohydrates content of the developed recovery supplement with Spirulina was 2% (w/w) higher than the muscle enhancer without Spirulina. It was not observed increased in the nutritional content of muscle recovery when added Spirulina. However, it is known that Spirulina presents active compounds with important functions for the body. Thus, the composition of the foods satisfied the nutritional needs of athletes. Regarding the stability of developed foods, the shelf life was estimated between 9 and 11 months.

A significant amount of insoluble fibrous protein, in the form of feather, hair, scales, skin and others are available as co-products of agro industrial processing. These wastes are rich in keratin and collagen. This study evaluated different fungi for the hydrolysis of insoluble fish protein residues. Proteins resulting from Micropogonias furnieri wastes through pH-shifting process were dried and milled for fermentation for 96 h. This resulted the production of keratinolytic enzymes in the medium. Trichoderma sp. on alkaline substrate (28.99 U mL-1) and Penicillium sp. on acidic substrate (31.20 U mL-1) showed the highest proteolytic activities. Penicillium sp. showed the largest free amino acid solubilization (0.146 mg mL-1) and Fusarium sp. the highest protein solubilization (6.17 mg mL-1).

This is an experimental, analytical and numerical study to optimize the biosurfactants production in solid-state fermentation of a medium containing rice straw and minced rice bran inoculated with Aspergillus fumigatus. The goal of this work was to analytically model the biosurfactants production in solid-state fermentation into a column fixed bed bioreactor. The Least-Squares Method was used to adjust the emulsification activity experimental values to a quadratic function semi-empirical model. Control variables were nutritional conditions, the fermentation time and the aeration. The mathematical model is validated against experimental results and then used to predict the maximum emulsification activity for different nutritional conditions and aerations. Based on the semi-empirical model the maximum emulsification activity with no additional hydrocarbon sources was 8.16 UE·g-1 for 112 hours. When diesel oil was used the predicted maximum emulsification activity was 8.10 UE·g-1 for 108 hours.

This study was aimed at evaluating the effects of Spirulina (Arthrospira) as a protein source in the nutritional recovery of rats subjected to protein malnutrition. In order to understand such effects, responses of the developing body, serum biochemical profile, and blood count of animals were analyzed. A total of, 23 Wistar Rattus norvegicus were given a proteic diet (AIN-93G adapted) in malnutrition phase (phase I) for 10 days. After this period, the rats were separated into four groups according to the protein source (recovery phase): Control (C), casein 12%; Spirulina level I (S1), Spirulina 8.8% + casein 5.0%; Spirulina level II (S2), Spirulina 17.6% + casein 0.15%, and Spirulina level III (S3), Spirulina 26.4%. Recovery phase (phase II) lasted 30 days. In both the phases, the consumption and body weight of the rats were monitored daily and weekly, respectively. The S1 treatment showed the highest values of Feed Efficiency Ratio (FER) and Quotient of Protein Efficiency Ratio (QPE) (p

ABSTRACT The aim of this study was to analyze the influence of solid waste on the cultivation of the microalgae Spirulina sp. LEB 18 and Chlorella fusca LEB 111 with 0, 40, 80 and 120 ppm of mineral coal ash. The addition of the ash did not inhibit the cultivation of microalgae at the tested concentrations, showing that it could be used for the cultivation of these microalgae due to the minerals present in the ash, which might substitute the nutrients needed for their growth.

The objective of this work was to study the antioxidant effect of phycocyanin on the oxidative stress induced by monosodium glutamate in the rats. The tests were performed with 32 rats of Wistar breed, divided into four groups, which were administered saline solution of phycocyanin, monosodium glutamate and monosodium glutamate plus phycocyanin. Sulfhydryl groups and the secondary substances derived from lipid oxidation were determined through the level of TBA. The evaluation of these values and the level of sulfhydryl showed that the administration of phycocyanin presented significant antioxidant effect (p < 0.05) reducing the oxidative stress induced by the monosodium glutamate in vivo.

Studies have been conducted on microalga Spirulina platensis (Arthrospira platensis) due to its therapeutic potential in several areas, including the capacity for preventing and decreasing the damages caused by hyperlipidemia and the antioxidant activity. The aim of the study was to evaluate the effect of microalga Spirulina platensis on hippocampus lipoperoxidation and lipid profile in rats with induced hypercholesterolemia during 60 days. The measurement of hippocampus lipoperoxidation did not demonstrate significant difference (p>0.05) when Spirulina platensis was added to hypercholesterolemic diet. The evaluation of lipid profile showed that the administration of the microalga in therapeutic and preventive ways led to a significant protective effect (pA microalga Spirulina platensis (Arthrospira platensis) vem sendo fonte de pesquisas devido a evidências de seu potencial terapêutico em diversas áreas, dentre elas a capacidade de prevenção e diminuição dos danos causados por dislipidemias e sua atividade antioxidante. Objetivou-se avaliar o efeito da microalga Spirulina platensis sobre a lipoperoxidação no hipocampo e perfil lipídico sérico em ratos com hipercolesterolemia induzida durante 60 dias. A dosagem da lipoperoxidação no hipocampo não demonstrou diferença significativa (p>0,05) quando Spirulina platensis foi adicionada na dieta hipercolêsterolemica. A avaliação do perfil lipídico demonstrou que a administração da microlaga de forma terapêutica e preventiva demonstrou efeito significativo (p

Objetivou-se avaliar o potencial de sacarificação do malte de milho para produção de álcool deste cereal. Para tal, foi realizada germinação do grão de milho a 20 ºC por 5 dias. O potencial amilolítico do malte de milho foi otimizado por meio de um Planejamento Fatorial Completo 2² com 3 pontos centrais, sendo as variáveis de estudo a temperatura de incubação e concentração de substrato [S]. A sacarificação foi realizada por meio de um Planejamento de Mistura com três pontos centrais, sendo as variáveis de estudo a concentração de malte e concentração de substrato, durante 6 horas. A fermentação foi conduzida com a melhor condição de sacarificação, em reator de 5 L e volume útil de 2 L. O pH foi fixado em 4,5-5. O Brix foi acertado para o valor de 14º. O mosto hidrolisado foi esterilizado e inoculado com 5,0 g.L-1 de Saccharomyces cerevisiae proveniente de fermento comercial liofilizado. O sistema foi submetido a 2 horas de aeração inicial (170 L O2.h-1) e mantido na temperatura de 30 ºC. Durante o processo de fermentação, foram realizadas determinações da concentração de células (g.L-1), açúcares redutores (mg.mL-1) e álcool (g.L-1). As variáveis temperatura de incubação e concentração de substrato foram significativos (p< 0,05) na condição de estudo de 20 % de substrato e incubação a 70 ºC. Os experimentos centrais com 50 % de malte apresentaram os melhores parâmetros cinéticos com taxa volumétrica de formação de produto em etanol de 2,81 g etanol.L-1.h-1 que corresponde a 8,0 ºGL e conversão de substrato em células 0,127 g célula.g glicose-1 .The aim of this research was the production of maize malt and the evaluation of its use for alcohol production. The maize grain was allowed to germinate at 20ºC for five days. The amylolitic potential of malt was optimized through a Complete Factorial Planning 2² with three central points, where the study variables were the temperature of incubation and the substrate concentration [S]. The sacarification was performed through a Planning of Mixture with three central points, where the study variables were the malt concentration and [S] during six 6 hours. The fermentation was carried out using the best sacarification condition, in a five-liter reactor and a two-liter working volume. The pH was maintained at 4.5 - 5.0. The Brix was corrected to 14º. The sterile hydrolyzed product was inoculated with 5.0 g.L-1 Saccharomyces cerevisiae. The system was submitted to two hours of initial aeration (170 L O2.h-1) and kept at 30ºC. During the fermentation process, analyses were made to determine the cell concentrations (g.L-1), reducing sugars (mg.mL-1), alcohol (g.L-1) and ºBrix. The temperature of incubation and substrate concentration were significant factors (p

The process of biodegradation of soils contaminated by animal (raw fish oil) and mineral (toluene) origin compounds was studied, verifying the influence of adding biosurfactants and chemical surfactants and nutrients in the media. The highest removal rate of fish oil was 59.47% obtained in the experiments containing biosurfactant and biostimulate in 90 days process. The highest removal rate of toluene was achieved in 14 days for experiments containing biosurfactant, chemical spreading and biosurfactant with biostimulation, showing great influence of evaporation on the process. The use of surfactants has shown to increase the contaminant bioavailability due to its higher degradation rate.

The fish proteins has the advantage of a high sensibility to the hydrolysis and also a balanced composition in aminoacids. The production of protein hydrolyzed from by-products of fish process industry has been receiving more attention on the last years. The aim of this work was to evaluate the production of protein hydrolyzed from Micropogonias furnieri through chemical and enzymatic methods, verifying some functional properties. The results showed that the production of the hydrolyzed improved some functional properties of the proteins found in the filet and in the waste, what is desirable for a subsequent application.

Biosurfactants present advantages in relation to the synthetic surfactants, as the biodegradability and low toxicity, and can be applied in the food industry, in pharmaceutical products, cosmetics and in the petroleum recovery. This paper aimed at selecting bacteria for biosurfactant production, evaluating the surface tension and the emulsifying activity and studying the fermentation process kinetics. The pure culture of Corynebacterium aquaticum showed capacity to promote emulsions formation and presented the smallest surface tension (28.8 mN m-1), and, in general, larger kinetic parameters, being selected as biosurfactant producer.

The objective of this study was to investigate biosurfactant production in solid state by Aspergillus fumigatus in fixed-bed column bioreactors using substrate based on agricultural residues. Without a supplementary carbon source the highest emulsifying activity (EA) was 11.17 emulsifying units (EU) g-1 of substrate at an aeration rate of 148 mL h-1g-1 but in the presence of diesel oil the highest EA value was 9.99 EU g-1 at an aeration rate of 119 mL h-1g-1 of substrate while supplementation with soya oil resulted in only 8.47 EU g-1 of substrate at an aeration rate of 119 mL h-1g-1.

O Brasil gera cerca de 18 milhões de toneladas de melaço por ano, com aproximadamente 50% de açúcares e carece de maior quantidade de alimentos que auxiliem no combate à desnutrição. Spirulina platensis é uma microalga que pode conter 74% de proteínas e, embora seja um microrganismo autotrófico, a complementação do meio de cultivo com carbono orgânico pode estimular seu crescimento. S. platensis foi cultivada em modo autotrófico com bicarbonato de sódio, e mixotrófico com 0,25; 0,50; 0,75 e 1,00 g.L-1 de melaço em pó (MEP) ou melaço líquido (MEL). A presença de MEL ou MEP resultou em crescimento por, no mínimo 35 dias, e melhores parâmetros de crescimento que os cultivos autotróficos que cresceram durante 30 dias. Utilizando ME P 0,25 g.L-1 a maior concentração de biomassa foi 2,59 g.L-1 e produtividade 0,066 g.L-1.dia-1, enquanto cultivos autotróficos alcançaram 1,44 g.L-1 e 0,045 g.L-1.dia-1. A máxima concentração de biomassa (2,83 g.L-1) e produtividade (0,098 g.L-1.dia-1) foram obtidas em MEL 0,50 g.L-1. Os resultados demonstram que o potencial brasileiro de produção de melaço pode ser explorado também para obtenção de altas concentrações de biomassa no cultivo da microalga Spirulina platensis.Brazil produces approximately 18,000,000 tons of molasses per year, containing 50% of sugars. This country needs more food help for the malnourishment disease. Spirulina platensis is a microalga that contains up to 74% proteins. It grows photoautotrophically, but the medium complementation with organic carbon may stimulate its growth. S. platensis was grown autotrophically and mixotrofically with 0.25; 0.50; 0.75 and 1.00 g.L-1 of powder molasses (MEP) or liquid molasses (MEL). Cultures with MEL or MEP have grown for more long time (minimum 35 days) and have reached higher biomass concentration and productivity than autotrophic one, that grew during 30 days. Cultures with MEP 0.25 g.L-1 have reached biomass concentration of 2.59 g.L-1 and productivity of 0.066 g.L-1.day-1. Maximum biomass concentration (2.83 g.L-1) and productivity (0.098 g.L-1.day-1-) were reached in cultures with MEL 0.50 g.L-1. Autotrophic cultures reached 1.44 g.L-1 and 0.045 g.L-1.day-1. Results showed that the Brazilian potential of molasses production may be also exploited to obtain higher biomass concentration in the culture of microalga Spirulina platensis.

As microalgas são consideradas fontes potenciais de diversos compostos químicos. Os ácidos graxos obtidos da biomassa podem apresentar efeitos terapêuticos em humanos e podem ser usados para produção de biodiesel. Objetivou-se, neste trabalho verificar o conteúdo lipídico e o perfil dos ácidos graxos das microalgas Spirulina sp., Scenedesmus obliquus, Chlorella kessleri e Chlorella vulgaris cultivadas em diferentes concentrações de dióxido de carbono e bicarbonato de sódio. A microalga Chlorella kessleri cultivada com 12% de CO2 apresentou a maior concentração de lipídios na biomassa seca (9,7% p/p). A máxima concentração de ácidos graxos insaturados foi 72,0% (p/p) para C. vulgaris cultivada com 12% de CO2. Para os ácidos graxos saturados o maior valor encontrado foi 81,6% (p/p), quando a microalga Spirulina sp. foi cultivada com 18% de CO2 e 16,8 g.L-1 de bicarbonato de sódio.Microalgae have a great potential as a source of several chemical compounds. The fatty acids have shown therapeutic effects and used to produce biodiesel. The aim of this work was to verify the lipid contents and the fatty acids profile of the microalga Spirulina sp., Scenedesmus obliquus, Chlorella kessleri and Chlorella vulgaris cultived in different carbon dioxide and sodium bicarbonate concentrations. The microalgae Chlorella kessleri cultived with 12% CO2 showed the highest lipid content in the dry biomass (9.7% p/p). The maximum unsaturated fatty acids concentration was 72.0% (p/p) to C. vulgaris in the culture with 12% CO2. The highest saturated fatty acids value was 81.6% (p/p) when microalga Spirulina sp. was cultived with 18% CO2 and 16.8 g.L-1 sodium bicarbonate.

A biorremediação é uma tecnologia que utiliza o metabolismo de microrganismos para eliminação ou redução, a níveis aceitáveis, de poluentes presentes no ambiente. Os herbicidas triazínicos são usados intensivamente no controle de ervas daninhas, principalmente na cultura de milho. Objetivou-se, neste trabalho, isolar fungos filamentosos de solos contaminados com herbicidas triazínicos (atrazine e simazine) e selecionar os microrganismos isolados quanto à capacidade de crescimento em meio adicionado de atrazine. Os microrganismos foram isolados, cultivados em meio Ágar-Batata-Dextrose (BDA) acidificado com ácido tartárico 10%, adicionado de 50 mg.Kg-1 de atrazine e incubados por 5 dias a 25ºC. Foi realizada a medida diária do crescimento fúngico e calculada a velocidade de crescimento radial através de regressão linear dos raios das colônias utilizando-se a equação r(t) = a + VCR .t (r:raio; t: tempo; VCR: velocidade de crescimento radial). Os resultados de VCR foram analisados através de Anova simples e do teste de Tukey, para comparação de médias. Foram isolados 15 fungos, pertencentes aos gêneros Aspergillus, Penicillium e Trichoderma. As maiores VCRs foram obtidas com fungos Aspergillus (A1) e Penicillium (AS1), isolados de solo contaminado com atrazine e atrazine adicionado de simazine, respectivamente, que apresentaram VCRs de 1,57 mm.d-1 e 1,28 mm.d-1. O crescimento dos fungos em meio contaminado com a atrazine indica a possibilidade de utilização desses fungos em estudos de biorremediação de solos contaminados com herbicidas triazínicos.Bioremediation is a technology that uses microrganism metabolism to quickly eliminate or reduce pollutants to acceptable levels into the environment. The triazine herbicides are intensively used to control harmful grass in the culture of maize. The aim of this work was to isolate filamentous fungi from soil contaminated with triazine herbicides and screening these fungi due to their ability of growth in a medium added by atrazine. The fungi were isolated, cultivated in potato-dextrose-agar plus 50 mg.Kg-1 of atrazine and incubated for 5 days at 25ºC. The measure of the rays of the colonies was carried out daily and the radial growth rate (RGR) through linear regression of colonies rays using the equation: r(t) = a + RGR .t (r:ray; t: time; RGR: radial growth rate). The RGR results were analyzed through analysis of variance and Tukey test for comparison of averages. Fifteen filamentous fungi from genus Aspergillus, Penicillium and Trichoderma were isolated. The highest RGRs were obtained with the fungi Aspergillus and Penicillium, when isolated from contaminated soil with atrazine and atrazine + simazine, respectively, showing RGR of 1.57 mm.d-1 and 1.28 mm.d-1. The growth of these fungi in atrazine contaminated meas indicates a possible of use of them in bioremediation experiments with contaminated soil containing triazine herbicides.

In this work, hypercholesterolemia was induced in rabbits by feeding them a high cholesterol diet (CD, 350 mg/d) and the effects of supplementing this diet with 0.5 g/d Spirulina platensis was evaluated by measuring the levels of serum total-cholesterol (TC), triacylglycerols (TAG) and high-density lipoprotein (HDL-cholesterol) at the start of the experiment and after 30 d and 60 d. It was found that the levels of serum cholesterol decreased from 1,054±101 mg.dL-1 in the rabbits fed a CD without S. platensis to 516±163 mg.dL-1 to those fed with a high cholesterol diet supplemented with S. platensis (significant at p A microalga Spirulina é cultivada e comercializada no mundo devido a suas características nutricionais (elevada concentração de proteínas, em torno de 65%, vitaminas e sais minerais) e ao seu potencial terapêutico no tratamento de inúmeras doenças, inclusive a hipercolesterolemia. Neste trabalho foi avaliada a inibição da hipercolesterolemia induzida em coelhos por uma dieta adicionada de colesterol (350 mg.d-1), pela suplementação de 0,5 g.dia-1 de biomassa de Spirulina platensis, sendo avaliados os níveis de colesterol total, triglicerídeos e HDL nos tempos de 0 d, 30 d e 60 d de tratamento. Os resultados indicaram que a adição de Spirulina platensis na dieta ocasionou decréscimo nos níveis de colesterol total de 1054±101 mg.dL-1 para 516±163 mg.dL-1 (p

The objective of the present work was to verify the lipid content and the fatty acid composition of the microalgae Spirulina sp., Scenedesmus obliquus, Synechococcus nidulans and Chlorella vulgaris cultivated in a medium containing CO2, SO2 and NO. The microalga Scenedesmus obliquus presented the highest lipid content (6.18%). For the other microalgae the lipid content ranged from 4.56 to 5.97%. The major monounsaturated fatty acids content was 66.01% for S. obliquus. The PUFA were obtained in major amount by the microalgae Spirulina sp. (29.37%) and S. nidulans (29.54%). The palmitoleic acid was in larger amount, with 41.02% concentration (Spirulina sp.).

Recently lipases have been increasing in prominence due to its wide industrial application. The lipase production can be influenced by different variables such as the producing microorganism, carbon sources, aeration and agitation conditions, inductor type and the geometry of the reactor. Biosurfactants are composites of surface active produced by microbial cells which reduce superficial and interfacial tensions. The objective of this study was to verify the influence of different process variables in the lipase production during a fermentative process. The results showed that the concomitant production of lipases and biosurfactant was possible in different cultivation conditions.

The aim of this work was to study the removal of CO2 and NO by microalgae and to evaluate the kinetic characteristics of the cultures. Spirulina sp. showed µmax and Xmax (0.11 d-1, 1.11 g L-1 d-1) when treated with CO2 and NaNO3. The maximum CO2 removal was 22.97% for S. obliquus treated with KNO3 and atmospheric CO2. The S. obliquus showed maximum NO removal (21.30%) when treated with NO and CO2. Coupling the cultivation of these microalgae with the removal of CO2 and NO has the potential not only to reduce the costs of culture media but also to offset carbon and nitrogen emissions.

Photosynthetic microorganism cultures, such as microalgae, represent one of the alternatives for fossil CO2 emissions mitigation. Carbon supply is the major cost component in microalgal cultures. Aiming to enhance the dissolved inorganic carbon uptake efficiency in microalgal cultures, Spirulina sp LEB-18 was cultivated in mediums containing NaHCO3 concentrations ranging from 2.8 to 100 g L-1. Results indicated that lower dissolved inorganic carbon concentratios (2.8 g L-1 NaHCO3) produce higher growth parameters (Xmax = 0.75 g L-1; Pmax = 0.145 g L-1 d-1; µmax = 0.254 d-1) and lower carbon losses (13.61%). At 50 g L-1 of NaHCO3 cell growth was inhibited and carbon losses reached 38.73%.

Amyloglucosidase (AMG) and exo-polygalacturonase (exo-PG) were simultaneously produced by two different strains of Aspergillus niger in solid-state fermentation (SSF) using defatted rice-bran as substrate. The effect of Aspergillus niger strain (t0005/007-2 and/or CCT 3312), inoculum type (spore suspension or fermented bran) and addition of inducers (pectin and/or starch) to the culture media was studied using a 3² x 2¹ factorial experimental design. The production of AMG and exo-PG was significantly affected by fungal strain and inoculum type but inducers had no effect. The maximum yields obtained were 1310 U/g dm for AMG using a spore suspension of A. niger CCT 3312 and 50.2 U/g dm for exo-PG production, using A. niger t0005/007-2 and fermented bran as inoculum. The yields obtained represented acceptable values in comparison with data available in the literature and indicated that defatted rice-bran was a good nutrient source.As enzimas amiloglicosidase (AMG) e exo-poligalacturonase (exo-PG) foram produzidas simultaneamente por duas cepas de Aspergillus niger, através de fermentação em estado sólido usando farelo de arroz desengordurado como substrato. Foram avaliados os efeitos da cepa de Aspergillus niger, tipo de inóculo e adição de indutores no meio de cultura, utilizando-se um planejamento experimental fracionário 3² x 2¹. O máximo rendimento obtido foi 1310 U/g ms para a produção de AMG e 50,2 U/g ms para a exo-PG. Comparando-se estes resultados com dados da literatura pode-se dizer que os rendimentos obtidos foram aceitáveis e indicam que o farelo de arroz desengordurado é uma boa fonte de nutrientes. A produção de AMG e exo-PG foi significativamente afetada pelas variáveis cepa de A. niger e tipo de inóculo, enquanto a variável indutor não apresentou influência significativa na produção destas enzimas.

The main aim of this work was to investigate the effects of temperature and nitrogen concentration on the antioxidant potential of extracts from Spirulina (Arthospira) platensis biomass. S. platensis biomass obtained at 35ºC and with 1.875 g.L-1 or 2.5 g.L-1 of sodium nitrate in the culture medium presented higher concentrations of phenolic compounds. The antioxidant potential of methanol extracts of biomass on the enzymatic browning caused by peroxidase were 29 and 35%, respectively, being the reduction related to the amount of phenolic compounds present in this extract.A cianobactéria Spirulina tem sido comercializada e estudada devido as suas propriedades nutricionais e terapêuticas no tratamento de doenças como o câncer, a hipercolesterolemia e a aterosclerose. Determinados compostos presentes na Spirulina, como os compostos fenólicos, a ficocianina e o tocoferol, podem apresentar atividade antioxidante. O principal objetivo deste trabalho foi avaliar o efeito da temperatura de cultivo e da concentração de nitrogênio no meio de cultivo, sobre o potencial antioxidante da microalga Spirulina (Arthospira) platensis. Quando a microalga foi cultivada a 35ºC e concentrações de nitrato de sódio de 1,875 g.L-1 ou 2,5 g.L-1, o potencial antioxidante dos extratos obtidos a partir da biomassa, sobre o escurecimento enzimático causado pela peroxidase, foi de 29% e 35%, respectivamente, sendo a redução no escurecimento relacionada com as quantidades de compostos fenólicos presentes nos extratos.

A Spirulina platensis tem sido estudada devido a seu alto valor protéico, digestibilidade e por apresentar quantidades significativas de ácidos graxos poliinsaturados, vitaminas, fenólicos e ficocianina, podendo ser utilizada na alimentação humana. A utilização de nutrientes de baixo custo é um fator importante na produção da cianobactéria por possibilitar a redução de custos de processo. Objetivou-se com este trabalho estudar o cultivo mixotrófico da S. platensis por meio da adição de uma fonte orgânica de carbono (glicose) em modo bateladaalimentada. Foi utilizado um Planejamento Fatorial Completo 2³ para o cultivo e as variáveis de estudo foram a concentração de glicose (0,5 gL-1 e 1,0 gL-1), a diluição do meio Zarrouk (50% e 75%) e a iluminância (1800 lux e 3000 lux). A concentração celular máxima obtida foi de 5,38 gL-1 com uma velocidade específica máxima de crescimento de 0,0063 h-1, nas condições de 0,5 gL-1 de glicose, diluição do meio de 75% e iluminância de 3000 lux.The cyanobacterium Spirulina platensis has been studied due to its high content (~65%) of highly digestible protein as well as significant amounts of polyunsaturated fatty acids, phenolics, vitamins, minerals and phycocyanin which could be useful in the human nutrition. The use of nutrients of low costs in the cyanobacterium growth could reduce the costs of production. We studied the fed-batch mixotrophic growth of the S. platensis in Zarrouk's medium with glucose (0.5 gL-1 and 1.0 gL-1) as carbon source and also investigated the effects of dilution (50% and 75%, with water) and illumination (1,800 lux and 3,000 lux) using a 2³ factorial design. The maximum celular concentration of 5.38 gL-1 and maximum specific growth rate of 0.0063 h-1 were obtained with a glucose concentration of 0.5 gL-1, 50% dilution and 1800 lux of illuminance.

Estudou-se o cultivo da cianobactéria Spirulina platensis utilizando-se efluente sintético de suíno a fim de avaliar o crescimento das cepas LEB 52 e PARACAS dessa cianobactéria, em função da diluição do meio (0 e 50%) e da concentração de bicarbonato de sódio (0 e 3g/L). Nesta etapa foi utilizado um Planejamento Fatorial Completo 2³. Na Segunda etapa, diluiu-se o meio em 80, 50 e 20% e utilizou-se um Planejamento Fatorial Multiníveis 3¹ x 2¹. Os cultivos foram realizados a 30°C, com fotoperíodo de 12 horas. As variáveis utilizadas como resposta nas duas etapas foram a concentração máxima de biomassa e a velocidade específica máxima de crescimento, sendo os resultados avaliados mediante de Análise de Variância. Na primeira etapa, os maiores valores de concentração celular, 0,55 g/L, foram obtidos com a cepa LEB-52 em efluente sintético diluído a 50% em água destilada e sem a adição de bicarbonato de sódio, como suplementação da fonte de carbono. Na otimização da diluição, o maior valor de concentração celular foi de 0,35 g/L utilizando-se cepa PARACAS e diluição de 80%. As duas cepas estudadas de Spirulina platensis podem crescer em efluente sintético de suíno e o seu crescimento é favorecido pela diluição do meio.The growth of LEB-52 and PARACAS strains of Spirulina platensis cyanobacteria was studied using synthetic swine wastewater. The effects of medium dilution (0 and 50%) and sodium bicarbonate addition to the medium (0 and 3g/L) were initially investigated. In this step, it was used a complete Factorial Planning 2³. In the second step, the medium was diluted at 80, 50 and 20% and it was used a Factorial Planning 3¹x2¹. The cultivation was carried out at 30°C, with photophase of 12 hours. The maximum biomass concentration and maximum specific growth rate were assessed, with the results being evaluated through Analysis of Variance. In first step, the greater biomass concentration (0.55g/L) was obtained with strain LEB-52, in synthetic swine wastewater diluted at 50% and without the sodium bicarbonate addition, as supplementation of the carbon source. In the second step, the greater biomass concentration was 0.35g/L using strain PARACAS and synthetic swine wastewater diluted at 80%. The two strains studied can grow in the synthetic swine wastewater and cyanobacteria growth is enhanced by medium dilution.

Microbial biopolymers can replace environmentally damaging plastics derived from petrochemicals. We investigated biopolymer synthesis by the cyanobacterium Spirulina strain LEB 18. Autotrophic culture used unmodified Zarrouk medium or modified Zarrouk medium in which the NaNO3 content was reduced to 0.25 g L−1 and the NaHCO3 content reduced to 8.4 g L−1 or increased to 25.2 g L−1. Heterotrophic culture used modified Zarrouk medium containing 0.25 g L−1 NaNO3 with the NaHCO3 replaced by 0.2 g L−1, 0.4 g L−1, or 0.6 g L−1 of glucose (C6H12O6) or sodium acetate (CH3COONa). Mixotrophic culture used modified Zarrouk medium containing 0.25 g L−1 NaNO3 plus 16.8 g L−1 NaHCO3 with the addition of 0.2 g L−1, 0.4 g L−1, or 0.6 g L−1 of glucose or sodium acetate. The highest biopolymer yield was 44% when LEB 18 was growing autotrophically in media containing 0.25 g L−1 NaNO3 and 8.4 g L−1 NaHCO3.

The microalgae cultivation can be used as alternative sources of food, in agriculture, residual water treatment, and biofuels production. Semicontinuous cultivation is little studied but is more cost-effective than the discontinuous (batch) cultivation. In the semicontinuous cultivation, the microalga is maintained in better concentration of nutrients and the photoinhibition by excessive cell is reduced. Thus, biomass productivity and biocompounds of interest, such as lipid productivity, may be higher than in batch cultivation. The objective of this study was to examine the influence of blend concentration, medium renewal rate, and concentration of sodium bicarbonate on the growth of Chlorella sp. during semicontinuous cultivation. The cultivation was carried out in Raceway type bioreactors of 6 L, for 40 d at 30°C, 41.6 µmol m−2 s−1, and a 12 h light/dark photoperiod. Maximum specific growth rate (0.149 d−1) and generating biomass (2.89 g L−1) were obtained when the blend concentration was 0.80 g L−1, the medium renewal rate was 40%, and NaHCO3 was 1.60 g L−1. The average productivity (0.091 g L−1 d−1) was achieved with 0.8 g L−1 of blend concentration and NaHCO3 concentration of 1.6 g L−1, independent of the medium renewal rate.

O cultivo de microalgas, como parte da biotecnologia moderna, tem recebido a atenção de pesquisadores em todas as partes do mundo. As condições de cultivo e o biorreatores para a produção em grande escala têm sido exaustivamente estudados. Similarmente ao que ocorre na agricultura convencional, o cultivo de microalgas para produção de biomassa tem como princípio a utilização do mecanismo fotossintético. As microalgas são consideradas como um dos mais eficientes sistemas biológicos de captação da energia solar para a produção de compostos orgânicos através do mecanismo fotossintético. A utilização da energia solar para conversão de CO² em matéria orgânica, em plantas e também nas microalgas, é fundamental para a manutenção da cadeia trófica, já que animais obtém energia para o metabolismo a partir da degradação de compostos orgânicos. Nesta revisão são apresentados os metabolismos de carbono e nitrogênio em microalgas, em especial nas cianobactérias, uma vez que os mesmos influenciam no desenvolvimento das microalgas e em características como cor, concentração de pigmentos e compostos de reserva. Primeiramente foram abordados os principais eventos metabólicos decorrentes da utilização da energia luminosa, tais como a fotossíntese, o metabolismo endógeno na ausência de energia luminosa e a fotorrespiração. Posteriormente foi abordado o metabolismo de assimilação de nitrogênio, já que este elemento, assim como o carbono, é macronutriente essencial no cultivo destes organismos. Finalmente, foi estudada a interação dos metabolismos principalmente no que diz respeito à influência da energia luminosa. Palavras-Chave: microalgas, metabolismo de carbono e nitrogênio

A Spirulina apresenta os maiores índices de produção de biomassa dentre as espécies habitantes do planeta e é fonte de compostos de grande interesse comercial, como: ficocianina, clorofila, &-caroteno e ácido y-linolênico. Neste trabalho é apresentada uma revisão dos lipídios e de pigmentos presentes na mesma, bem como a biossíntese dos lipídios em cianobactérias e a atuação dos ácidos graxos essenciais no organismo humano, o potencial medicinal e nutricional da Spirulina, sua distribuição natural e meios de cultivo. palavras-chave: lipídios, Spirulina, pigmentos, ácidos graxos essenciais