Search

Plastic additives are introduced in plastic material formulations, along with organic polymers, to offer different properties such as stability, plasticity or color. However, plastic additives may migrate from the plastic material to the content (in case of plastic containers) or to the material in contact with the plastic, like human skin. In the case of plastic medical devices, this migration is of particular interest, as plastic additives may be deleterious to health. In the present paper, we examined the interest of combining supercritical fluid extraction (SFE) to supercritical fluid chromatography (SFC) hyphenated to mass spectrometry (MS) in an online system to characterize plastic additives in laboratory gloves, taken as samples of medical devices. A set of target compounds comprising 18 plasticizers, 4 antioxidants and 2 lubricants was defined and their detectability with MS was examined, where it appeared that electrospray ionization (ESI) provided better detectability than atmospheric pressure chemical ionization (APCI). After examining possible stationary phases with the help of Derringer desirability function, an isocratic chromatographic method (CO 2 :methanol 95:5) was developed on Shim-pack UC Phenyl column. The extraction method was examined with a 3-level full factorial design of experiments to optimize the extraction temperature (40 °C) and pressure (200 bar). The online SFE-SFC-MS method was compared to offline methods where the samples were extracted with liquid solvents at atmospheric pressure or high pressure then analysed with SFC-MS. In all cases, offline methods showed significant contaminants (like the oleamide lubricant) issuing from laboratory plastic materials as nitrogen drying station, syringes and filters, while the online method allowed a complete elimination of laboratory contaminations. Furthermore, the online method saved time, solvents and laboratory consumables. It will also show that transferring a compressible fluid from a loading loop is favourable to high efficiency, as the resulting chromatographic peaks are much thinner than when transferring a liquid. Compared to injecting liquid heptane, the efficiency increase was 3.4-fold, while compared to injecting liquid methanol (a common practice in SFC), the efficiency increase was 13-fold. Finally, the additive composition of different laboratory gloves was compared., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Benjamin Caux reports financial support was provided by Agence Nationale pour la Recherche et la Technologie (ANRT). Caroline West reports equipment, drugs, or supplies was provided by Shimadzu Corporation. The corresponding author is a guest editor for the virtual special issue in which this paper is submitted. If there are other authors, they declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Author(s). Published by Elsevier B.V. All rights reserved.)

In this study, we present the development of a loop-based two-dimensional supercritical fluid system in multiple heart-cutting modes (mSFC-SFC), with diode-array and mass spectrometric detection. The instrument design was developed to be as simple as possible, based on a single SFC instrument, with the sole addition of three external 2-port 6-position valves. The objective was to achieve the most complete transfer of a peak from the first to the second dimension, whatever the composition of the mobile phase, i.e., whatever the proportion of carbon dioxide and methanol cosolvent along a wide gradient elution. Thanks to fine adjustment of the valve switching times, the first-dimension peaks were parked in 50 μL or 100 μL loops and later discharged to the second dimension. The interest of this instrument was then demonstrated with a sample application on a natural product: an extract of Citrus aurantium L. bark was analyzed, with a particular focus on chiral flavonoids, neohesperidin, and naringin. In this system, the first dimension was an achiral separation of the flavonoids, based on a polar diethylamine-bonded silica stationary phase (ACQUITY Torus DEA), while the second dimension used a stereoselective polysaccharide stationary phase (CHIRALPAK IB-3) to resolve flavonoid diastereomers. Excellent repeatability was demonstrated, with relative standard deviation values on retention times and peak areas all below 2%, together with excellent peak capacity and peak shapes (no distortion observed), making it possible to quantify diastereomers in the second-dimension separation. This good repeatability was also shown for the transfer rate between the two dimensions, which reached a value of 83%. Finally, transferring a compressible sample from the first to the second dimension is demonstrated to yield excellent performance, despite the large loop volume.

Annatto, obtained from the seeds of achiote ( Bixa orellana L.), is a widely used orange pigment rich in bixin and other apocarotenoids. This work reports the optimisation of a green extraction method of pigments and antioxidant compounds from achiote as well as its integration in a one-step green extraction-cosmetic formulation process. A biphasic solvent system of water and oil was used to recover simultaneously polar polyphenols, and less polar compounds, such as δ-tocotrienol and bixin. The optimisation of the ultrasound assisted extraction is presented, as well as a comparison of different vegetable oils used as extraction solvents. The composition, physicochemical properties and antioxidant activity of the oils were studied and their extraction performance was compared. Refined sunflower oil proved to be a better solvent than virgin olive, jojoba, coconut and grapeseed oils. Both aqueous and oil phases displayed an interesting antioxidant capacity. The oil phase contained 0.9% of bixin, as well as minor apocarotenoids and δ-tocotrienol. Twelve compounds, mainly phenolics, were identified by UHPLC-DAD-HRMS/MS in the aqueous phase. Twenty-one volatile compounds were identified in the volatile fraction by SPME-GC-MS. Lastly, a one-step green process is proposed to combine the extraction and the cosmetic formulation of the bioactive compounds.

As an alternative to fossil volatile hydrocarbon solvents used nowadays in perfumery, investigation on essential oil of Commiphora wildii Merxm. oleo gum resin as a source of heptane is reported here. Heptane, representing up to 30 wt-% of this oleo gum resin, was successfully isolated from the C. wildii essential oil, using an innovative double distillation process. Isolated heptane was then used as a solvent in order to extract some noble plants of perfumery. It was found that extracts obtained with this solvent were more promising in terms of sensory analysis than those obtained from fossil-based heptane. In addition, in order to valorize the essential oil depleted from heptane, chemical composition of this oil was found to obtain, and potential biological activity properties were studied. A total of 172 different compounds were identified by GC-MS in the remaining oil. In vitro tests-including hyaluronidase, tyrosinase, antioxidant, elastase and lipoxygenase, as well as inhibitory tests against two yeasts and 21 bacterial strains commonly found on the skin-were carried out. Overall, bioassays results suggest this heptane-depleted essential oil is a promising active ingredient for cosmetic applications.

Preferential enrichment (PE) is a crystallization process, starting from either a racemic of slightly enantio-enriched solution (ca. +5%) that results in a high enantiomeric excess in the liquid phase (>+90%ee) and a slight opposite excess in the deposited crystals (−2 to −5%ee). The mechanism(s) of this symmetry-breaking phenomenon is (are) still a matter of debate since it eludes rationalization by phase diagram formalism. In this publication, we thoroughly reinvestigate the PE phenomenon of arginine fumarate by using a new approach: the process is monitored by introducing isotopically labeled arginine enantiomers into the crystallization medium to better understand the mass exchanges during crystallization. These experiments are supported by chiral HPLC-MS/MS. This study permits re-evaluating the criteria that were thought mandatory to perform PE. In particular, we show that PE occurs by a continuous exchange between the solution and the crystals and does not require the occurrence of a solvent-mediated solid−solid phase transition.

During phase III study ERA-223, patients under combination therapy with radium-223 and abiraterone showed an increased risk of bone fractures and a possible higher risk of death. This observation led to a change in the German therapeutic guidelines in 2018. Radium-223 is now only allowed as a third-line monotherapy (besides ADT) in patients with metastatic castration resistant prostate cancer (mCRPC) with symptomatic bone lesions without known visceral metastases or for patients with mCRPC, for whom no other available systematic therapy is suitable. Since almost no data on practice-related care research on the use of radium-223 exist, we consulted members of d-uo (German Uro-Oncologists) over their therapy algorithms. This study analysed data of patients treated with radium-223 between 2014 and 2019. It could be shown that 50% of mCRPC-patients had received radium-223 in the past as third-line therapy. Half of these were treated in combination with new androgen receptor targeted therapies (ARTA) and no increase in bone fractures was observed. This was most likely due to the additional use of bone protecting agents. Despite the late cancer stage, treatment response was seen in almost half of the patients., Competing Interests: Die Autoren R. Schönfelder, J. Klier, M. Johannsen und F. König erhielten in der Vergangenheit von der Firma BAYER Unterstützungen für Kongressreisen sowie Honorare für die Teilnahme an Advisory Boards und für das Halten von Vorträgen., (Thieme. All rights reserved.)

Over the last few years, the development of micro-distilleries producing diverse spirits with various flavors has been observed. Versatile analytical techniques for the characterization of aroma compounds in such alcoholic beverages are therefore required. A model mixture embodying a theoretical distilled spirit was made according to the data found in literature to compare usual extraction techniques. When it was applied to the model liquor, the headspace solid phase microextraction (HS-SPME) extraction method was preferred to the liquid-liquid extraction (LLE), solid phase extraction (SPE) and stir bar/headspace sorptive extraction (SBSE/HSSE) methods according to efficiency, cost, and environmental criteria. An optimization study using the model mixture showed that the extraction was optimal with a divinylbenzene/carboxen/poly(dimethylsiloxane) DVB/CAR/PDMS fiber, during 60 min, at 35 °C and with the addition of 10% NaCl. This method was successfully applied to three different commercial liquors and led to the identification of 188 flavor compounds, including alcohols, esters, lactones, carbonyls, acetals, fatty acids, phenols, furans, aromatics, terpenoids, alkenes, and alkanes., Competing Interests: The authors declare no conflict of interest. The company or this cooperation did not affect the authenticity and objectivity of the experimental results of this work.

New polar embedded aromatic stationary phases of different functionalities (mono- and trifunctional) and on different silica supports (Fully Porous Particle (FPP) and Superficially Porous Particle (SPP)) were synthesized to determine the impact of the functionality on the retention process and the selectivity towards aromatic compounds. A full experimental characterization was performed using a combination of techniques (elemental analysis, thermogravimetric measurements, infrared spectroscopy and solid-state NMR) to differentiate unambiguously the mono- and trifunctional Stationary Phases (SP). Commercially available columns with either an aromatic group or a polar embedded group were compared to the new stationary phases. The latter presented enhanced affinity for polycyclic aromatic hydrocarbons (PAH) structures compared to alkylbenzenes, especially when using methanol instead of acetonitrile as the organic modifier., (Copyright © 2017 Elsevier B.V. All rights reserved.)