Search

Mod-Cam is a first light and commissioning instrument for the CCAT-prime project's six-meter aperture Fred Young Submillimeter Telescope (FYST), currently under construction at 5600 m on Cerro Chajnantor in Chile's Atacama Desert. Prime-Cam, a first-generation science instrument for FYST, will deliver over ten times greater mapping speed than current and near-term facilities for unprecedented 280-850 GHz broadband and spectroscopic measurements with microwave kinetic inductance detectors (MKIDs). CCAT-prime will address a suite of science goals, from Big Bang cosmology to star formation and galaxy evolution over cosmic time. Mod-Cam deployment on FYST with a 280 GHz instrument module containing MKID arrays is planned for early science observations in 2024. Mod-Cam will be used to test instrument modules for Prime-Cam, which can house up to seven instrument modules. We discuss the design and status of the 0.9 m diameter, 1.8 m long Mod-Cam receiver and 40 cm diameter 280 GHz instrument module, with cold stages at 40 K, 4 K, 1 K, and 100 mK. We also describe the instrument module's cryogenic readout designs to enable the readout of more than 10,000 MKIDs across 18 networks., Comment: Presented at SPIE Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy XI

NGC 6240 is a luminous infrared galaxy in the local universe in the midst of a major merger. We analyze high-resolution interferometric observations of warm molecular gas using CO J = 3–2 and 6–5 in the central few kpc of NGC 6240 taken by the Atacama Large Millimeter Array. Using these CO line observations, we model the density distribution and kinematics of the molecular gas between the nuclei of the galaxies. Our models suggest that a disk model represents the data poorly. Instead, we argue that the observations are consistent with a tidal bridge between the two nuclei. We also observe high-velocity redshifted gas that is not captured by the model. These findings shed light on small-scale processes that can affect galaxy evolution and the corresponding star formation.

The CCAT-prime project's first light array will be deployed in Mod-Cam, a single-module testbed and first light cryostat, on the Fred Young Submillimeter Telescope (FYST) in Chile's high Atacama desert in late 2022. FYST is a six-meter aperture telescope being built on Cerro Chajnantor at an elevation of 5600 meters to observe at millimeter and submillimeter wavelengths.1 Mod-Cam will pave the way for Prime-Cam, the primary first generation instrument, which will house up to seven instrument modules to simultaneously observe the sky and study a diverse set of science goals from monitoring protostars to probing distant galaxy clusters and characterizing the cosmic microwave background (CMB). At least one feedhorn-coupled array of microwave kinetic inductance detectors (MKIDs) centered on 280 GHz will be included in Mod-Cam at first light, with additional instrument modules to be deployed along with Prime-Cam in stages. The first 280 GHz detector array was fabricated by the Quantum Sensors Group at NIST in Boulder, CO and includes 3,456 polarization-sensitive MKIDs. Current mechanical designs allow for up to three hexagonal arrays to be placed in each single instrument module. We present details on this first light detector array, including mechanical designs and cold readout plans, as well as introducing Mod-Cam as both a testbed and predecessor to Prime-Cam., Comment: 9 pages, 6 figures, SPIE Astronomical Telescopes + Instrumentation 2020, Paper Number: 11453-58

We demonstrate microwave kinetic inductance detectors (MKIDs) whose sensitivity is limited by photon noise at 50 mHz signal frequencies. The sub-Hz part of the detection spectrum is important for millimeter-wave instruments, yet photon noise below 1 Hz in MKIDs has not previously been demonstrated unambiguously. Devices are feedhorn-coupled, direct-absorber-type and consist of lumped-element superconducting resonators fabricated from a hybrid of stoichiometric TiN, Al, and an amorphous-Si passivation layer. Viewing a 7K thermal load and a passband centered on 2mm, the device noise spectrum is white down to 50 mHz and has an amplitude consistent with photon noise. We will present these measurements and discuss the multiple design choices that lead to the result.

Kinetic inductance traveling-wave parametric amplifiers (KITs) are under development for the read out of large cryogenic detector arrays. We present new KIT designs based on 20nm NbTiN films patterned by use of standard optical photolithography. We report device gain, bandwidth, and noise properties, which approach the quantum limit. In addition, we demonstrate a KIT preamplifier with a microwave SQUID multiplexer. The improved input referred current noise, as compared to standard HEMT readout, opens up new possibilities for cryogenic receivers. We discuss these benefits.

We present a theoretical model and experimental characterization of a microwave kinetic inductance traveling-wave amplifier (KIT), whose noise performance, measured by a shot-noise tunnel junction (SNTJ), approaches the quantum limit. Biased with a dc current, the KIT operates in a three-wave mixing fashion, thereby reducing by several orders of magnitude the power of the microwave pump tone and associated parasitic heating compared to conventional four-wave mixing KIT devices. It consists of a 50 Ohms artificial transmission line whose dispersion allows for a controlled amplification bandwidth. We measure $16.5^{+1}_{-1.3}$ dB of gain across a 2 GHz bandwidth with an input 1 dB compression power of -63 dBm, in qualitative agreement with theory. Using a theoretical framework that accounts for the SNTJ-generated noise entering both the signal and idler ports of the KIT, we measure the system-added noise of an amplification chain that integrates the KIT as the first amplifier. This system-added noise, $3.1\pm0.6$ quanta (equivalent to $0.66\pm0.15$ K) between 3.5 and 5.5 GHz, is the one that a device replacing the SNTJ in that chain would see. This KIT is therefore suitable to read large arrays of microwave kinetic inductance detectors and promising for multiplexed superconducting qubit readout.

SuperSpec is an on-chip filter-bank spectrometer designed for wideband moderate-resolution spectroscopy at millimeter wavelengths, employing TiN kinetic inductance detectors. SuperSpec technology will enable large-format spectroscopic integral field units suitable for high-redshift line intensity mapping and multi-object spectrographs. In previous results we have demonstrated noise performance in individual detectors suitable for photon noise limited ground-based observations at excellent mm-wave sites. In these proceedings we present the noise performance of a full $R\sim 275$ spectrometer measured using deployment-ready RF hardware and software. We report typical noise equivalent powers through the full device of $\sim 3 \times 10^{-16} \ \mathrm{W}/\sqrt{\mathrm{Hz}}$ at expected sky loadings, which are photon noise dominated. Based on these results, we plan to deploy a six-spectrometer demonstration instrument to the Large Millimeter Telescope in early 2020., 8 pages, 5 figures. Accepted by the Journal of Low Temperature Physics (Proceedings of the 18th International Workshop on Low Temperature Detectors)

The BLAST Observatory is a proposed superpressure balloon-borne polarimeter designed for a future ultra-long duration balloon campaign from Wanaka, New Zealand. To maximize scientific output while staying within the stringent superpressure weight envelope, BLAST will feature new 1.8m off-axis optical system contained within a lightweight monocoque structure gondola. The payload will incorporate a 300L $^4$He cryogenic receiver which will cool 8,274 microwave kinetic inductance detectors (MKIDs) to 100mK through the use of an adiabatic demagnetization refrigerator (ADR) in combination with a $^3$He sorption refrigerator all backed by a liquid helium pumped pot operating at 2K. The detector readout utilizes a new Xilinx RFSOC-based system which will run the next-generation of the BLAST-TNG KIDPy software. With this instrument we aim to answer outstanding questions about dust dynamics as well as provide community access to the polarized submillimeter sky made possible by high-altitude observing unrestricted by atmospheric transmission. The BLAST Observatory is designed for a minimum 31-day flight of which 70$\%$ will be dedicated to observations for BLAST scientific goals and the remaining 30$\%$ will be open to proposals from the wider astronomical community through a shared-risk proposals program., Comment: Presented at SPIE Ground-based and Airborne Telescopes VIII, December 13-18, 2020

ALMA cycle 3 observations of $^{12}$CO $ J = 3\rightarrow2$, $^{13}$CO $J = 4\rightarrow 3$, SiO J = $8 \rightarrow 7$, and HCN J = $ 5 \rightarrow 4$ are presented. Significant extended emission is detected in $^{12}$CO J $ = 3\rightarrow2$ with a morphology that is indicative of m = 2 tidal features, suggesting gas inflow. In addition, outflow for both nuclei are found in the $^{12}$CO J $ = 3\rightarrow2$. Significant SiO absorption is detected in the western nucleus. HCN that is morphologically distinct from CO is detected in both nuclei. These observations are compared to non-LTE radiative transfer models created using the Line Modeling Engine (LIME) for simple gas dynamics to gain insight into how physical parameters, such as rotational velocity, turbulent velocity, gas temperature, dust temperature, and gas mass can reproduce the observed kinematic and spatial features. The eastern nucleus is found to be best modeled with an inclusion of a temperature asymmetry from one side of the disk to the other. It is also found that the western nucleus is optically thick even in the less abundant species of $^{13}$CO, absorbing significant amounts of continuum radiation.

SuperSpec is a compact on-chip spectrometer operating at mm and sub-mm wavelengths which will enable the construction of sensitive multibeam spectrometers. SuperSpec employs a filter bank architecture, consisting of lithographically patterned niobium superconducting microstrip mm-wave resonators. The power admitted by each resonator is detected by a titanium nitride lumped-element kinetic inductance detector (KID) with resonant frequency from 100 to 200 MHz. We present a characterization of the detector noise performance down to 10 mK measured in a dark setting. We report a device NEP of $$2.7 \times 10^{-18}\, \hbox {W Hz}^{-1/2}$$ at 210 mK, which is below the expected photon noise level at high-altitude ground-based observatories. The NEP decreases to a constant value of approximately $$7.0 \times 10^{-19}\, \hbox {W Hz}^{-1/2}$$ below 130 mK. The white noise is well modeled by thermal generation–recombination noise (GR noise) down to 130 mK and a noise floor at low temperatures. Moreover, the addition of low-pass coaxial filters further reduces the noise floor to achieve an NEP of $$5.7 \times 10^{-19} \,\hbox {W Hz}^{-1/2}$$ below 100 mK. We discuss a photolithographic technique to adjust KID resonances that results in an $$f_{0}$$ designed versus measured scatter of $$1.7 \times 10^{-5}$$ , which will allow a significant reduction in resonators lost to clashes in full-scale designs. Finally, we present a demonstration of a new ROACH-2-based readout system operating below 500 MHz and show preliminary data indicating the suitability of this system for future highly multiplexed KID arrays.

SuperSpec is a new technology for mm and sub-mm spectroscopy. It is an on-chip spectrometer being developed for multi-object, moderate-resolution ( R∼300 ), large bandwidth survey spectroscopy of high-redshift galaxies for the 1 mm atmospheric window. This band accesses the CO ladder in the redshift range of z= 0–4 and the [CII] 158 μ m line from redshift z= 5–9. SuperSpec employs a novel architecture in which detectors are coupled to a series of resonant filters along a single microwave feedline instead of using dispersive optics. This construction allows for the creation of a full spectrometer occupying only ∼10cm2 of silicon, a reduction in size of several orders of magnitude when compared to standard grating spectrometers. This small profile enables the production of future multi-beam spectroscopic instruments envisioned for the millimeter band to measure the redshifts of dusty galaxies efficiently. The SuperSpec collaboration is currently pushing toward the deployment of a SuperSpec demonstration instrument in fall of 2018. The progress with the latest SuperSpec prototype devices is presented; reporting increased responsivity via a reduced inductor volume (2.6 μm3 ) and the incorporation of a new broadband antenna. A detector NEP of 3–4 ×10−18 W/Hz 0.5 is obtained, sufficient for background-limited observation on mountaintop sites. In addition, beam maps and efficiency measurements of a new wide-band dual bow-tie slot antenna are shown.

Arrays of tens of thousands of sensitive far-infrared detectors coupled to a cryogenic 4–6 m class orbital telescope are needed to trace the assembly of galaxies over cosmic time. The sensitivity of a 4 Kelvin telescope observing in the far-infrared (30–300 $$\upmu $$ m) would be limited by zodiacal light and Galactic interstellar dust emission, and require broadband detector noise equivalent powers (NEPs) in the range of 3 $$\times 10^{-19}$$ W/ $$\sqrt{\mathrm{Hz}}$$ . We are fabricating and testing 96 element arrays of lumped-element kinetic inductance detectors (LEKIDs) designed to reach NEPs near this level in a low-background laboratory environment. The LEKIDs are fabricated with aluminum: the low normal-state resistivity of Al permits the use of very thin wire-grid absorber lines (150 nm) for efficient absorption of radiation, while the small volumes enable high sensitivities because quasiparticle densities are high. Such narrow absorption lines present a fabrication challenge, but we deposit TiN atop the Al to increase the robustness of the detectors and achieve a 95 $$\%$$ yield. We present the design of these Al/TiN bilayer LEKIDs and preliminary sensitivity measurements at 350 $$\upmu $$ m optically loaded by cold blackbody radiation.

SuperSpec is a novel on-chip spectrometer we are developing for multi-object, moderate resolution (R = 100 - 500), large bandwidth (~1.65:1) submillimeter and millimeter survey spectroscopy of high-redshift galaxies. The spectrometer employs a filter bank architecture, and consists of a series of half-wave resonators formed by lithographically-patterned superconducting transmission lines. The signal power admitted by each resonator is detected by a lumped element titanium nitride (TiN) kinetic inductance detector (KID) operating at 100 - 200 MHz. We have tested a new prototype device that achieves the targeted R = 100 resolving power, and has better detector sensitivity and optical efficiency than previous devices. We employ a new method for measuring photon noise using both coherent and thermal sources of radiation to cleanly separate the contributions of shot and wave noise. We report an upper limit to the detector NEP of $1.4\times10^{-17}$ W Hz$^{-1/2}$, within 10% of the photon noise limited NEP for a ground-based R=100 spectrometer., 8 pages, 4 embedded figures, accepted for publication in the Journal of Low Temperature Physics

We present a superconducting microresonator thermometer based on two-level systems (TLS) that is drop-in compatible with cryogenic microwave systems. The operational temperature range is 50-1000~mK (which may be extended to 5~mK), and the sensitivity (50-75~$\mu$K/$\sqrt{\mathrm{Hz}}$) is relatively uniform across this range. The miniature footprint that conveniently attaches to the feedline of a cryogenic microwave device facilitates the measurement of on-chip device temperature and requires no additional thermometry wiring or readout electronics. We demonstrate the practical use of these TLS thermometers to investigate static and transient chip heating in a kinetic inductance traveling-wave parametric amplifier operated with a strong pump tone. TLS thermometry may find broad application in cryogenic microwave devices such as superconducting qubits and detectors.

SuperSpec is a new technology for millimeter and submillimeter spectroscopy. It is an on-chip spectrometer being developed for multi-object, moderate resolution (R = ~300), large bandwidth survey spectroscopy of high-redshift galaxies for the 1 mm atmospheric window. SuperSpec targets the CO ladder in the redshift range of z = 0 to 4, the [CII] 158 um line from z = 5 to 9, and the [NII] 205 um line from z = 4-7. All together these lines offer complete redshift coverage from z = 0 to 9. SuperSpec employs a novel architecture in which detectors are coupled to a series of resonant filters along a single microwave feedline instead of using dispersive optics. This construction allows for the creation of a full spectrometer occupying only 20 cm squared of silicon, a reduction in size of several orders of magnitude when compared to standard grating spectrometers. This small profile enables the production of future multi-object spectroscopic instruments required as the millimeter-wave spectroscopy field matures. SuperSpec uses a lens-coupled antenna to deliver astrophysical radiation to a microstrip transmission line. The radiation then propagates down this transmission line where upon proximity coupled half wavelength microstrip resonators pick off specific frequencies of radiation. Careful tuning of the proximity of the resonators to the feedline dials in the desired resolving power of the SuperSpec filterbank by tuning the coupling quality factor. The half wavelength resonators are then in turn coupled to the inductive meander of kinetic inductance detectors (KIDs), which serve as the power detectors for the SuperSpec filterbank. Each SuperSpec filter bank contains hundreds of titanium nitride TiN KIDs and the natural multiplexibility of these detectors allow for readout of the large numbers of required detectors. The unique coupling scheme employed by SuperSpec allows for the creation of incredibly low volume (2.6 cubic microns), high responsivity, TiN KIDs. Since responsivity is proportional to the inverse of quasiparticle-occupied volume, this allows SuperSpec to reach the low NEPs required by moderate resolution spectroscopy to be photon limited from the best ground-based observing sites. We will present the latest results from SuperSpec devices. In particular, detector NEPs, measured filter bank efficiency (including transmission line losses), and spectral profiles for a full ~ 300-channel filterbank. Finally, we will report on our system end to end efficiency and total system NEP.

SuperSpec is an on-chip filter-bank spectrometer designed for wideband moderate-resolution spectroscopy at millimeter and submillimeter wavelengths. Employing TiN kinetic inductance detectors, the device has demonstrated noise performance suitable for photon noise limited ground-based observations at excellent millimeter-wave observing sites. In these proceedings we present a demonstration instrument featuring six independent single-polarization SuperSpec chips, covering 190-310 GHz with 300 channels. We summarize spectrometer performance, describe the cryostat and optical coupling, and present the readout and telescope control system. In an initial deployment to the Large Millimeter Telescope, we plan to observe submillimeter galaxies in [CII] emission at redshifts 5 < z < 9 and CO emission from lower-redshift galaxies. Real on-sky performance will inform the design of the next generation of instruments using large numbers of SuperSpec devices, which could include multi-object spectrometers or line intensity mapping experiments that target [CII] during the Epoch of Reionization.

SuperSpec is an integrated, on-chip spectrometer for millimeter and sub-millimeter astronomy. We report the approach, design optimization, and partial characterization of a 300 channel filterbank covering the 185 to 315 GHz frequency band that targets a resolving power R ~ 310, and fits on a 3.5×5.5 cm chip. SuperSpec uses a lens and broadband antenna to couple radiation into a niobium microstrip that feeds a bank of niobium microstrip half-wave resonators for frequency selectivity. Each half-wave resonator is coupled to the inductor of a titanium nitride lumped-element kinetic inductance detector (LEKID) that detects the incident radiation. The device was designed for use in a demonstration instrument at the Large Millimeter Telescope (LMT).

SuperSpec is a new spectrometer-on-a-chip technology for submm/mm-wave spectroscopy. SuperSpec stands out from other direct-detection submm spectrometer technologies in that the detectors are coupled to a series of resonant filters along a single microwave feedline instead of using dispersive optics. SuperSpec makes use of kinetic inductance detectors (KIDs) to detect radiation in this filter bank. The small profile of this design makes SuperSpec a natural choice to produce a multi-object spectrometer for tomographic mapping or galaxy redshift surveys. We have recently fabricated a device that is a 50 channel subset of a full 280 channel filter bank, which would cover the 190 - 310 GHz range at R = 275. Analysis of the data from this device informs us of the potential design modifications to enable a high-yield background-limited SuperSpec spectrometer. The results indicate that this subset filter bank can scale up to a full filter bank with only a few collisions in readout space and less than 20% variation in responsivity for the detectors. Additionally, the characterization of this and other prototype devices suggests that the noise performance is limited by generation-recombination noise. Finally, we find that the detectors are sufficiently sensitive for ground-based spectroscopy at R = 100, appropriate for tomographic mapping experiments. Further modifications are required to reach the background limit for R = 400, ideal for spectroscopy of individual galaxies.

We present the design and characterization of low-volume, lumped-element aluminum kinetic inductance de- tectors for sensitive far-infrared astronomy observations. The lumped-element kinetic inductance detectors are comprised of meandered inductors that serve as radiation absorbers in parallel with interdigitated capacitors, forming high quality factor resonators. Low inductor volumes lead to low noise equivalent powers by raising quasiparticles densities, and hence responsivities, with respect to larger volumes. Low volumes are achieved with thin (20 nm), narrow (150 nm) inductors. The interdigitated capacitor architecture is designed to mitigate two-level system noise by lowering electric fields in the silicon substrate. Resonance frequencies are in the range of 190 to 500 MHz, with measured internal quality factors in excess of 1 x 10 5 . In a prior incarnation, a titanium nitride layer on top of the aluminum served as a protective layer, but complicated the superconducting proper- ties. These results were reported previously. In the current incarnation, the aluminum layer is left bare with no titanium nitride over-layer. The results for these bare aluminum devices include a yield of 88%, frequency responsivity of 10 9 W -1 , and noise equivalent power of 1 x 10 -17 W Hz -1/2 for a 350μm array. There is no evidence for 1=f noise down to at least 200 mHz. The sensitivity is currently limited by white noise, very likely from stray light in the testbed; for this detector design, sensitivities limited by generation-recombination noise in a lower-background environment should be several orders of magnitude lower.

Selecting sources with rising flux densities towards longer wavelengths from Herschel/SPIRE maps is an efficient way to produce a catalogue rich in high-redshift (z > 4) dusty star-forming galaxies. The effectiveness of this approach has already been confirmed by spectroscopic follow-up observations, but the previously available catalogues made this way are limited by small survey areas. Here we apply a map-based search method to 274 deg$^2$ of the HerMES Large Mode Survey (HeLMS) and create a catalogue of 477 objects with SPIRE flux densities $S_{500} > S_{350} >S_{250}$ and a $5 ��$ cut-off $S_{500} > $ 52 mJy. From this catalogue we determine that the total number of these "red" sources is at least an order of magnitude higher than predicted by galaxy evolution models. These results are in agreement with previous findings in smaller HerMES fields; however, due to our significantly larger sample size we are also able to investigate the shape of the red source counts for the first time. We have obtained spectroscopic redshift measurements for two of our sources using the Atacama Large Millimeter/submillimeter Array (ALMA). The redshifts z = 5.1 and z = 3.8 confirm that with our selection method we can indeed find high-redshift dusty star-forming galaxies., Accepted by MNRAS

We present Sunyaev-Zel'dovich (SZ) effect measurements from wide-field images towards the galaxy cluster RX J1347.5-1145 obtained from the Caltech Submillimeter Observatory with the Multiwavelength Submillimeter Inductance Camera (MUSIC) at 147, 213, 281, and 337 GHz and with Bolocam at 140 GHz. As part of our analysis, we have used higher frequency data from Herschel-SPIRE and previously published lower frequency radio data to subtract the signal from the brightest dusty star-forming galaxies behind RX J1347.5-1145 and from the AGN in RX J1347.5-1145's BCG. Using these five-band SZ effect images, combined with X-ray spectroscopic measurements of the temperature of the intra-cluster medium (ICM) from Chandra, we constrain the ICM optical depth to be $\tau_e = 7.33^{+0.96}_{-0.97} \times 10^{-3}$ and the ICM line of sight peculiar velocity to be $v_{pec} = -1040^{+870}_{-840}$ km s$^{-1}$. The errors for both quantities are limited by measurement noise rather than calibration uncertainties or astrophysical contamination, and significant improvements are possible with deeper observations. Our best-fit velocity is in good agreement with one previously published SZ effect analysis and in mild tension with the other, although some or all of that tension may be because that measurement samples a much smaller cluster volume. Furthermore, our best-fit optical depth implies a gas mass slightly larger than the Chandra-derived value, implying the cluster is elongated along the line of sight., Comment: Accepted for publication in ApJ

We describe the Short Wavelength Camera (SWCam) for the CCAT observatory including the primary science drivers, the coupling of the science drivers to the instrument requirements, the resulting implementation of the design, and its performance expectations at first light. CCAT is a 25 m submillimeter telescope planned to operate at 5600 meters, near the summit of Cerro Chajnantor in the Atacama Desert in northern Chile. CCAT is designed to give a total wave front error of 12.5 μm rms, so that combined with its high and exceptionally dry site, the facility will provide unsurpassed point source sensitivity deep into the short submillimeter bands to wavelengths as short as the 200 μm telluric window. The SWCam system consists of 7 sub-cameras that address 4 different telluric windows: 4 subcameras at 350 μm, 1 at 450 μm, 1 at 850 μm, and 1 at 2 mm wavelength. Each sub-camera has a 6’ diameter field of view, so that the total instantaneous field of view for SWCam is equivalent to a 16’ diameter circle. Each focal plane is populated with near unit filling factor arrays of Lumped Element Kinetic Inductance Detectors (LEKIDs) with pixels scaled to subtend an solid angle of (λ/D)2 on the sky. The total pixel count is 57,160. We expect background limited performance at each wavelength, and to be able to map < 35(°)2 of sky to 5 σ on the confusion noise at each wavelength per year with this first light instrument. Our primary science goal is to resolve the Cosmic Far-IR Background (CIRB) in our four colors so that we may explore the star and galaxy formation history of the Universe extending to within 500 million years of the Big Bang. CCAT's large and high-accuracy aperture, its fast slewing speed, use of instruments with large format arrays, and being located at a superb site enables mapping speeds of up to three orders of magnitude larger than contemporary or near future facilities and makes it uniquely sensitive, especially in the short submm bands.

Low-loss lenses are required for submillimeter astronomical applications, such as instrumentation for CCAT, a 25 m diameter telescope to be built at an elevation of 18,400 ft in Chile. Silicon is a leading candidate for dielectric lenses due to its low transmission loss and high index of refraction; however, the latter can lead to large reflection losses. Additionally, large diameter lenses (up to 40 cm), with substantial curvature present a challenge for fabrication of antireflection coatings. Three anti-reflection coatings are considered: a deposited dielectric coating of Parylene C, fine mesh structures cut with a dicing saw, and thin etched silicon layers (fabricated with deep reactive ion etching) for bonding to lenses. Modeling, laboratory measurements, and practicalities of fabrication for the three coatings are presented and compared. Measurements of the Parylene C anti-reflection coating were found to be consistent with previous studies and can be expected to result in a 6% transmission loss for each interface from 0.787 to 0.908 THz. The thin etched silicon layers and fine mesh structure anti-reflection coatings were designed and fabricated on test silicon wafers and found to have reflection losses less than 1% at each interface from 0.787 to 0.908 THz. The thin etched silicon layers are our preferred method because of high transmission efficiency while having an intrinsically faster fabrication time than fine structures cut with dicing saws, though much work remains to adapt the etched approach to curved surfaces and optics < 4" in diameter unlike the diced coatings.