Search

openaire: EC/H2020/788489/EU//BioELCell Funding Information: We acknowledge funding support by the European Research Council under the advanced grant 788489 BioElCell. Luiz G. Greca & Karl Mihhels acknowledge funding from Aalto University School of Chemical Engineering and Konrad W. Klockars acknowledges funding from the Walter Ahlström Foundation . We acknowledge the support by Aalto University at OtaNano — Nanomicroscopy Center (Aalto-NMC). The authors are also grateful for the support of the Academy of Finland through its Centres of Excellence Programme (2014–2019) under Project 264677 “Molecular Engineering of Biosynthetic Hybrid Materials Research” (HYBER). We thank Prof. Olli Ikkala for his insightful comments. BLT is the recipient of the Khalifa University of Science and Technology (KUST) Faculty Startup Project (Project code: 84741140-FSU-2022-021 ). Publisher Copyright: © 2022 The industrial implementation of cellulose nanocrystals (CNCs) in films and coatings requires thorough evaluation of the internal stresses post-consolidation, as they cause fracturing and peeling. Characterizing the impact of plasticizing additives on stress is therefore critical. Herein, we use the deflection of thin glass substrates to measure drying stresses in consolidating CNC films, and benchmark the impact of five additives (glucose, glycerol, poly(ethylene glycol) (PEG), poly(vinyl alcohol) (PVA) and bovine serum albumin). Glycerol and PEG reduced drying stresses effectively, while PEG of increased molecular weight (from 0.2 to 10 kDa), PVA, and BSA were less effective. We analyzed the temporal aspects of the process, where stress relaxation of up to 30 % was observed 2 years after coating formation. Finally, we provide a framework to evaluate the impact of CNC morphology on residual stresses. The introduced approach is expected to fast-track the optimization and implementation of coatings based on biocolloids.

openaire: EC/H2020/788489/EU//BioELCell This review considers the most recent developments in supramolecular and supraparticle structures obtained from natural, renewable biopolymers as well as their disassembly and reassembly into engineered materials. We introduce the main interactions that control bottom-up synthesis and top-down design at different length scales, highlighting the promise of natural biopolymers and associated building blocks. The latter have become main actors in the recent surge of the scientific and patent literature related to the subject. Such developments make prominent use of multicomponent and hierarchical polymeric assemblies and structures that contain polysaccharides (cellulose, chitin, and others), polyphenols (lignins, tannins), and proteins (soy, whey, silk, and other proteins). We offer a comprehensive discussion about the interactions that exist in their native architectures (including multicomponent and composite forms), the chemical modification of polysaccharides and their deconstruction into high axial aspect nanofibers and nanorods. We reflect on the availability and suitability of the latter types of building blocks to enable superstructures and colloidal associations. As far as processing, we describe the most relevant transitions, from the solution to the gel state and the routes that can be used to arrive to consolidated materials with prescribed properties. We highlight the implementation of supramolecular and superstructures in different technological fields that exploit the synergies exhibited by renewable polymers and biocolloids integrated in structured materials.

International audience; The behavior of nanoparticles in solution is largely dominated by their shape and interaction potential. Despite considerable progress in the preparation of patchy and compartmentalized particles, access to nanoparticles with complex surface patterns and topographies remains limited. Here, we show that polyanionic brushes tethered to rod-like cellulose nanocrystals (CNCs) spontaneously develop a striped or helical topography through interpolyelectrolyte complexation with polycationic diblock copolymers. Using cryogenic transmission electron microscopy (cryo-TEM) and tomography (cryo-ET), we follow the complexation process and analyze the delicate 3D topography on the CNC surface. The described approach is facile and modular and can be extended to other block chemistries, nanoparticles, and surfaces, thereby providing a versatile platform toward surface-patterned particles with complex topographies and spatially arranged functional groups.

openaire: EC/H2020/788489/EU//BioELCell Funding Information: We are thankful for funding support from Commission H2020 program ERC Advanced Grant (No. 788489, BioELCell), the Canada Excellence Research Chair initiative and the Canada Foundation for Innovation (CFI). We are grateful for the support by the FinnCERES Materials Bioeconomy Ecosystem. B. Zhao is grateful for the financial support from the China Scholarship Council (Project #201702640280) and NordForsk Project 82214 “High-Value Products from Lignin”. The authors thank L. Greca for providing the lignin microparticles and for discussions on their oxidative thermostabilization. The authors thank I. Schlapp-Hackl for assisting in the installation of the CO adsorption device. We also acknowledge J. Campbell for XPS measurements. 2 Publisher Copyright: © 2021 The Authors. Published by American Chemical Society. Copyright: Copyright 2021 Elsevier B.V., All rights reserved. Multiscale carbon supraparticles (SPs) are synthesized by soft-templating lignin nano- and microbeads bound with cellulose nanofibrils (CNFs). The interparticle connectivity and nanoscale network in the SPs are studied after oxidative thermostabilization of the lignin/CNF constructs. The carbon SPs are formed by controlled sintering during carbonization and develop high mechanical strength (58 N·mm-3) and surface area (1152 m2·g-1). Given their features, the carbon SPs offer hierarchical access to adsorption sites that are well suited for CO2 capture (77 mg CO2·g-1), while presenting a relatively low pressure drop (∼33 kPa·m-1 calculated for a packed fixed-bed column). The introduced lignin-derived SPs address the limitations associated with mass transport (diffusion of adsorbates within channels) and kinetics of systems that are otherwise based on nanoparticles. Moreover, the carbon SPs do not require doping with heteroatoms (as tested for N) for effective CO2 uptake (at 1 bar CO2 and 40 °C) and are suitablefor regeneration, following multiple adsorption/desorption cycles. Overall, we demonstrate porous SP carbon systems of low cost (precursor, fabrication, and processing) and superior activity (gas sorption and capture).

Structural adhesives are relevant to many engineering applications, especially those requiring load-bearing joints with high lap shear strength. Typical adhesives are synthesized from acrylics, epoxies, or urethanes, which may pose a burden to sustainability and the environment. In nature, the interfacial interactions between chitin and proteins are used for structural purposes and as a bio-cement, resulting in materials with properties unmatched by their man-made counterparts. Herein, we show that related supramolecular interactions can be harnessed to develop high strength green adhesives based on chitin nanocrystals (ChNCs), isolated from shrimp shells, and hen egg white lysozyme (HEWL) used in its monomeric or amyloid forms. Consolidation of the bicomponent suspensions, placed between glass substrates, results in long-range ordered superstructures. The formation of these structures is evaluated by surface energy considerations, followed by scanning electron, atomic force, and polarized microscopies of the consolidated materials. For 0.8 mg of bio-adhesive (lysozyme, ChNCs or their composites), lap shear loads of over 300 N are reached. Such remarkable adhesion reaches maximum values at protein-to-ChNC ratios below 1 : 4, reflecting the synergy established between the components (ca. 25% higher load compared to ChNCs, the strongest single component). We put the observed adhesive performance in perspective by comparing the lap-shear performance with current research on green supramolecular adhesives using natural biopolymers. The results are discussed in the context of current efforts to standardize the measurement of adhesive strength and bond preparation. The latter is key to formalizing the metrology and materials chemistry of bio-based adhesives. The proposed all-green system is expected to expand current developments in the design of bio-based adhesives. © The Royal Society of Chemistry 2021, Journal of Materials Chemistry A, 9 (35), ISSN:2050-7488, ISSN:2050-7496

We designed and synthesized high chi-low N-maltoheptaose-(triazolium(+)/N(SO2CF3)(2)(-))-polyisoprene-(triazolium(+)/N-(SO2CF3)(2)(-) -maltoheptaose ABA triblock elastomers featuring triazolium(+)/N(SO2 CF3)(2)(-) (TFSI-) counteranion ionic interfaces separating their constituting polymeric sub-blocks. Spin-coated and solvent-vapor- annealed (SVA) MH1.2k-(T+/TFSI-)-PI4.3k-(T+/TFSI-)-MH1.2k thin films demonstrate interface-induced charge cohesion through ca. 1 nm "thick" ionic nanochannels which facilitate the self-assembly of a perpendicularly aligned lamellar structure. Atomic force microscopy (AFM) and (grazing-incidence) small-angle X-ray scattering ((GI)-SAXS) characterizations of MH1.2k-(T+/TFSI-)-PI4.3k-(T+/TFSI-)- MH1.2k and pristine triBCP analogous thin films revealed sub-10 nm block copolymer (BCP) self-assembly and unidirectionally aligned nanostructures developed over several mu m(2) areas. Solvated TFSI- counterions enhance the oligosaccharide sub-block packing during SVA. The overall BCP phase behavior was mapped through SAXS characterizations comparing di- vs triblock polymeric architectures, a middle PI sub-block with two different molecular masses, and TFSI- or I- counteranion effects. This work highlights the benefits of inducing single-point electrostatic interactions within chemical structures of block copolymers to master the long-range self-assembly of prescribed morphologies.

openaire: EC/H2020/788489/EU//BioELCell The complex nature of typical colloids and corresponding interparticle interactions pose a challenge in understanding their self-assembly. This specifically applies to biological nanoparticles, such as those obtained from chitin, which typically are hierarchical and multidimensional. In this study, we obtain chitin nanocrystals by one-step heterogeneous acid hydrolysis of never-dried crab residues. Partial deacetylation facilitates control over the balance of electrostatic charges (ζ-potential in the range between +58 and +75 mV) and therefore affords chitin nanocrystals (DE-ChNC) with axial aspect (170-350 nm in length), as determined by cryogenic transmission electron microscopy and atomic force microscopy. We find that the surface amines generated by deacetylation, prior to hydrolysis, play a critical role in the formation of individual chitin nanocrystals by the action of a dual mechanism. We directly access the twisting feature of chitin nanocrystals using electron tomography (ET) and uncover the distinctive morphological differences between chitin nanocrystals extracted from nondeacetylated chitin, ChNC, which are bundled and irregular, and DE-ChNC (single, straight nanocrystals). Whereas chitin nanocrystals obtained from dried chitin precursors are known to be twisted and form chiral nematic liquid crystals, our ET measurements indicate no dominant twisting or handedness for the nanocrystals obtained from the never-dried source. Moreover, no separation into typical isotropic and anisotropic phases occurs after 2 months at rest. Altogether, we highlight the critical role of drying the precursors or the nanopolysaccharides to develop chirality.

The iridescence displayed by films made from cellulose nanocrystals (CNCs) has long been the subject of fundamental research. This has expanded our understanding of colloidal self-assembly towards the development of advanced materials. However, the application of such findings is less reported for visual designs that exploit structural color. Aesthetic outputs are already in reach, but requires input from trend setters in the design and art industries. In this realm, the CNC-based iridescence uniquely offers broadband, multi-colored reflections through the “coffee ring” effect, which arises upon evaporation-induced self-assembly (EISA). Although this effect has been thoroughly studied in the context of axisymmetric patterns, complex geometries remain to be evaluated for large-scale implementation. This is central to the present efforts, where EISA of CNC suspensions occurred onto non-circular surfaces. We used orientation-dependent contact angle measurements, profilometry and fixed-light source photography tounveil the effect of asymmetric drying fluxes at sharp angles, between 30° and 90°, on CNC particle deposition and resulting color patterns. We also demonstrate the causality between increased capillary fluxes and deposition with the help of modelling via energy minimization of the suspension volume onto a given surface and using the diffusion equation to obtain the local concentration of water vapor during EISA. Lastly, we study the effect of background reflections as well as light and temperature resistance of CNC-based reflectors, both important for any deployment. The results from this multidisciplinary effort, involving applied design, art and colloid chemistry, point to the excellent prospects of CNC films for the development of structured and chromatic patterns. Graphical abstract: [Figure not available: see fulltext.].

The right-handed twist along aqueous dispersed cellulose nanocrystals allows right-handed chiral plasmonics upon electrostatic binding of gold nanoparticles in dilute environment, upon tuning the particle sizes and concentrations. Simulations using nanoparticle coordinates from cryo-electron tomography confirm the experimental results. The finding suggests generalization for other chiral and helical colloidal templates for nanoscale chiral plasmonics.

The chiral nematic self-assembly of aqueous suspensions of cellulose nanocrystals is partially preserved on evaporation of water, but the ordering of the rod-like nanoparticles may become distorted by changes in volume, ionic strength and surface and convective forces during evaporation, thus affecting the morphology and optical properties of the dried film. Proposed applications for these solids with chiral nematic order require confirmation of their structure. A SEM examination of the fracture surface of a slowly-dried film showed a surprisingly regular fan-like pattern which is shown to be characteristic of cross-sections of the left-handed helicoidal arrangement of nanocrystals, where the helicoidal axis was almost perpendicular to the film surfaces. Superimposed on this pattern was what appeared to be a regular porosity, which is postulated to result from pull-out of the nanocrystals oriented orthogonal to the fracture surface.

Herein we report the synthesis of cellulose nanocrystals (CNCs) grafted with poly(acrylic acid) (PAA) chains of different lengths using Cu-mediated surface initiated-controlled radical polymerization (SI-CRP). First, poly(tert-butylacrylate) (PtBA) brushes were synthesized; then, subsequent acid hydrolysis was used to furnish PAA brushes tethered onto the CNC surfaces. The CNCs were chemically modified to create initiator moieties on the CNC surfaces using chemical vapor deposition (CVD) and continued in solvent phase in DMF. A density of initiator groups of 4.6 bromine ester groups/nm(2) on the CNC surface was reached, suggesting a dense functionalization and a promising starting point for the controlled/living radical polymerization. The SI-CRP of tert-butylacrylate proceeded in a well-controlled manner with the aid of added sacrificial initiator, yielding polymer brushes with polydispersity values typically well below 1.12. We calculated the polymer brush grafting density to almost 0.3 chains/nm(2), corresponding to high grafting densities and dense polymer brush formation on the nanocrystals. Successful rapid acid hydrolysis to remove the tert-butyl groups yielded pH-responsive PAA-polyelectrolyte brushes bound to the CNC surface. Individually dispersed rod-like nanoparticles with brushes of PtBA or PAA were clearly visualized by AFM and TEM imaging.

Tosylation and acylation of cellulose were performed under mild reaction conditions using imidazolium based ionic liquids (ILs) as solvents. The non-degradative nature, lower viscosity, as well as higher solubility of cellulose in [amim]Cl encouraged us to carry out the reactions in this media. The reactions described here were optimised for this particular solvent in order to obtain different cellulose derivatives with high yields, homogeneity and degree of substitution (DS). Two reagents employed for the in situ activation of carboxylic acids were N,N′-carbonyldiimidazole (CDI) and 1-ethyl-3-(3′-dimethylaminopropyl)carbodiimide hydrochloride (EDCI). Final products were characterised by solution and solid-state NMR techniques.

Cellulose nanocrystals (CNCs) are high aspect ratio colloidal rods with nanoscale dimensions, attracting considerable interest recently due to their high mechanical properties, chirality, sustainability, and availability. In order to exploit them for advanced functions in new materials, novel supracolloidal concepts are needed to manipulate their self-assemblies. We report on exploring multivalent interactions to CNC surface and show that dendronized polymers (DenPols) with maltose-based sugar groups on the periphery of lysine dendrons and poly(ethylene-alt-maleimide) polymer backbone interact with CNCs. The interactions can be manipulated by the dendron generation suggesting multivalent interactions. The complexation of the third generation DenPol (G3) with CNCs allows aqueous colloidal stability and shows wrapping around CNCs, as directly visualized by cryo high-resolution transmission electron microscopy and electron tomography. More generally, as the dimensions of G3 are in the colloidal range due to their ~6 nm lateral size and mesoscale length, the concept also suggests supracolloidal multivalent interactions between other colloidal objects mediated by sugar-functionalized dendrons giving rise to novel colloidal level assemblies.