Search

Hydrogen energy-based electrochemical energy conversion technologies offer the promise of enabling a transition of the global energy landscape from fossil fuels to renewable energy. Here, we present a comprehensive review of the fundamentals of electrocatalysis in alkaline media and applications in alkaline-based energy technologies, particularly alkaline fuel cells and water electrolyzers. Anion exchange (alkaline) membrane fuel cells (AEMFCs) enable the use of nonprecious electrocatalysts for the sluggish oxygen reduction reaction (ORR), relative to proton exchange membrane fuel cells (PEMFCs), which require Pt-based electrocatalysts. However, the hydrogen oxidation reaction (HOR) kinetics is significantly slower in alkaline media than in acidic media. Understanding these phenomena requires applying theoretical and experimental methods to unravel molecular-level thermodynamics and kinetics of hydrogen and oxygen electrocatalysis and, particularly, the proton-coupled electron transfer (PCET) process that takes place in a proton-deficient alkaline media. Extensive electrochemical and spectroscopic studies, on single-crystal Pt and metal oxides, have contributed to the development of activity descriptors, as well as the identification of the nature of active sites, and the rate-determining steps of the HOR and ORR. Among these, the structure and reactivity of interfacial water serve as key potential and pH-dependent kinetic factors that are helping elucidate the origins of the HOR and ORR activity differences in acids and bases. Additionally, deliberately modulating and controlling catalyst–support interactions have provided valuable insights for enhancing catalyst accessibility and durability during operation. The design and synthesis of highly conductive and durable alkaline membranes/ionomers have enabled AEMFCs to reach initial performance metrics equal to or higher than those of PEMFCs. We emphasize the importance of using membrane electrode assemblies (MEAs) to integrate the often separately pursued/optimized electrocatalyst/support and membranes/ionomer components. Operando/in situ methods, at multiscales, and ab initio simulations provide a mechanistic understanding of electron, ion, and mass transport at catalyst/ionomer/membrane interfaces and the necessary guidance to achieve fuel cell operation in air over thousands of hours. We hope that this Review will serve as a roadmap for advancing the scientific understanding of the fundamental factors governing electrochemical energy conversion in alkaline media with the ultimate goal of achieving ultralow Pt or precious-metal-free high-performance and durable alkaline fuel cells and related technologies. This work was supported by the Center for Alkaline-Based Energy Solutions, an Energy Frontier Research Center program supported by the U.S. Department of Energy, under Grant DE-SC0019445. This work acknowledges the long-term support of TEM facilities at the Cornell Center for Materials Research (CCMR) which are supported through the National Science Foundation Materials Research Science and Engineering Center (NSF MRSEC) program (DMR1719875), and Cornell high-energy synchrotron sources (CHESS), which is supported by the National Science Foundation under Award DMR-1332208.

Tuning the crystal phase of bimetallic nanocrystals offers an alternative avenue to improving their electrocatalytic performance. Herein, we present a facile and one-pot synthesis approach that is used to enhance the catalytic activity and stability toward oxygen reduction reaction (ORR) in alkaline media via control of the crystal structure of Pd-Bi nanocrystals. By merely altering the types of Pd precursors under the same conditions, the monoclinic structured Pd5Bi2 and conventional face-centered cubic (fcc) structured Pd3Bi nanocrystals with comparable size and morphology can be precisely synthesized, respectively. Interestingly, the carbon-supported monoclinic Pd5Bi2 nanocrystals exhibit superior ORR activity in alkaline media, delivering a mass activity (MA) as high as 2.05 A/mgPd. After 10,000 cycles of ORR durability test, the monoclinic structured Pd5Bi2/C nanocatalysts still remain a MA of 1.52 A/mgPd, which is 3.6 times, 16.9 times, and 21.7 times as high as those of the fcc Pd3Bi/C counterpart, commercial Pd/C, and Pt/C electrocatalysts, respectively. Moreover, structural characterizations of the monoclinic Pd5Bi2/C nanocrystals after the durability test demonstrate the excellent retention of the original size, morphology, composition, and crystal phase, greatly alleviating the leaching of the Bi component. This work provides new insight for the synthesis of multimetallic catalysts with a metastable phase and demonstrates phase-dependent catalytic performance.

Among the multi-metallic nanocatalysts, Pt-based alloy nanocrystals (NCs) have demonstrated promising performance in fuel cells and water electrolyzers. Herein, we demonstrate a facile colloidal synthesis of monodisperse trimetallic Pt–Fe–Ni alloy NCs through a co-reduction of metal precursors. The as-synthesized ternary NCs exhibit superior mass and specific activities toward oxygen reduction reaction (ORR), which are ∼2.8 and 5.6 times as high as those of the benchmark Pt/C catalyst, respectively. The ORR activity of the carbon-supported Pt–Fe–Ni nanocatalyst is persistently retained after the durability test. Owing to the incorporation of Fe and Ni atoms into the Pt lattice, the as-prepared trimetallic Pt-alloy electrocatalyst also manifestly enhances the electrochemical activity and durability toward the oxygen evolution reaction with a reduced overpotential when compared with that of the benchmark Pt/C (△η = 0.20 V, at 10 mA cm−2). This synthetic strategy paves the way for improving the reactivity for a broad range of electrocatalytic applications.

Fabrication of 3d metal-based core@shell nanocatalysts with engineered Pt-surfaces provides an effective approach for improving the catalytic performance. The challenges in such preparation include shape control of the 3d metallic cores and thickness control of the Pt-based shells. Herein, we report a colloidal seed-mediated method to prepare octahedral CuNi@Pt-Cu core@shell nanocrystals using CuNi octahedral cores as the template. By precisely controlling the synthesis conditions including the deposition rate and diffusion rate of the shell-formation through tuning the capping ligand, reaction temperature, and heating rate, uniform Pt-based shells can be achieved with a thickness of

Significance Dynamically understanding the microscopic processes governing ordering transformations has rarely been attained. The situation becomes even more challenging for nanoscale alloys, where the significantly increased surface-area-to-volume ratio not only opens up a variety of additional freedoms to initiate an ordering transformation but also allows for kinetic interplay between the surface and bulk due to their close proximity. We provide direct evidence of the microscopic processes controlling the ordering transformation through the surface–bulk interplay in Pt–Fe nanoalloys and new features rendered by variations in alloy composition and chemical stimuli. These results provide a mechanistic detail of ordering transformation phenomena which are widely relevant to nanoalloys as chemical ordering occurs in most multicomponent materials under suitable environmental bias.

Precise control over the size, shape, composition, structure, and crystal phase of random alloy and intermetallic nanocrystals has been intensively explored in technologically important applications in recent years. Different from the monometallic nanocrystals and other types of structural nanocrystals such as core-shell and heterostructured nanocrystals, well-defined multimetallic random alloy and intermetallic nanocrystals exhibit unique and intriguing physicochemical properties, serving as ideal models for benefiting the structure-to-property studies. As such, random alloy and intermetallic nanocrystals have attracted extensive attention and interest in scientific research and shown huge potential in various fields. In this review, we focus specifically on summarizing the synthetic principles and strategies developed to form random alloy and intermetallic nanocrystals with enhanced performance. Some representative examples are purposely selected for emphasizing basic concepts and mechanistic understanding. We then highlight the fascinating properties and widespread applications of random alloy and intermetallic nanocrystals in electrocatalysis, heterogeneous catalysis, optical and photocatalysis, as well as magnetism and conclude the review by addressing the prospects and current challenges for the controlled synthesis of random alloy and intermetallic nanocrystals.

Fraction-controlled Pt–Cu-based porous films were prepared using an electrochemical deposition–stripping synthetic approach, and their structure, composition, and electronic structure were characte...

We report a facile method to fabricate CuNi nano-octahedra and nanocubes using a colloidal synthesis approach. The CuNi nanocrystals terminated with exclusive crystallographic facets were controlled and achieved by a group of synergetic capping ligands in a hot solution system. Specifically, the growth of {111}-bounded CuNi nano-octahedra is derived by a thermodynamic control, whereas the generation of {100}-terminated CuNi nanocubes is steered by a kinetic capping of chloride. Using a reduction of 4-nitrophenol with sodium borohydride as a model reaction, CuNi nano-octahedra and nanocubes demonstrated a strong facet-dependence due to their different surface energies although both exhibited remarkable catalytic activity with the high rate constant over mass (k/m). A kinetic study indicated that this is a pseudo first-order reaction with an excess of sodium borohydride. CuNi nanocubes as the catalysts showed better catalytic performance (k/m = 385 s-1•g-1) than the CuNi nano-octahedra (k/m = 120 s-1•g-1), indicating that 4-nitrophenol and hydrogen were adsorbed on the 100 facets with their molecules parallel to the surface much easier than those on {111} facets.

Ceria (CeO2) possesses a distinctive redox property due to a reversible conversion to its nonstoichiometric oxide and has been considered as a promising catalyst in the oxidative coupling of methane. Since a heterogeneously catalytic process usually takes place only on the surface of catalysts, it is reasonably expected that the performance of a catalyst, such as CeO2, highly relies on its size- and shape-dependent surface structure. We report our recent progress in achieving exclusive crystal facet-terminated CeO2 nanocrystals using a shape-controlled synthesis protocol in a one-pot colloidal system. We modified a two-phase solvothermal approach to fabricate cubic and truncated octahedral CeO2 nanocrystals with a size-control. During the two-phase solvothermal process, we propose that the Ce-precursors transfer from the aqueous layer to the interface of the organic phase, promoted by the capping ligands (as known as phase-transfer catalysts), for the oxidation and nucleation, and subsequently form CeO2 nanocrystals in the organic layer. As different capping ligands favor binding on diverse crystal facets, tuning the composition of the capping ligand with a precise control could generate nanocrystals that are dominated by a single type of facets with a relatively narrow size distribution.

In this work, we demonstrate a size-controlled synthesis of CuNi octahedral nanocrystals (NCs) using a hot colloidal solution approach. Two different sizes of CuNi nano-octahedra are chosen and investigated. It is determined that the reagent concentration remarkably plays a key role in the formation of the size-defined CuNi octahedral NCs. In terms of the reduction of 4-nitrophenol (4-NP), it uncovers that the obtained CuNi octahedral NCs (in both sizes) exhibit higher catalytic activity than those of CuNi spherical NCs reported previously. It further indicates that the catalytic performance is strongly size-dependent due to their devise specific surface areas of the exposed crystallographic planes.

In the synthesis of metallic nanocrystals (NCs) using a high-temperature colloidal approach, the competition between deposition and diffusion of “free atom (or clusters)” plays an important role as it can direct the morphology of NCs during their evolution. This competition is closely associated with some dynamic conditions such as heat and mass transfer. Stirring speed and ramp rate of heating are two factors that greatly impact the heat and mass transfer processes and consequently determine the morphology of the products but rarely discussed in most synthetic protocols. Herein, we study the syntheses of Pt-M (M = Ni, Fe) NCs as model reactions, showing that a low stirring speed and high ramp rate of heating result in ununiform pod-like NCs, whereas the inverse conditions promote NCs in a uniform shape. This observation can be plausibly explained using a competition mechanism between the deposition and diffusion of the newly reduced atoms during a stage of the NC’s growth.

Resolving the structure–property relationships of two-dimensional (2D) organic–inorganic hybrid perovskites is essential for the development of photovoltaic and photoelectronic devices. Here, pressure (0–10 GPa) was applied to 2D hybrid perovskite flakes mechanically exfoliated from butylammonium lead halide single crystals, (C4H9NH3)2PbI4, from which we observed a series of changes of the strong excitonic emissions in the photoluminescence spectra. By correlating with in situ high-pressure X-ray diffraction results, we examine successfully the relationship between structural modifications in the inorganic PbI42– layer and their excitonic properties. During the transition between Pbca (1b) phase and Pbca (1a) phase at around 0.1 GPa, the decrease in ⟨Pb–I–Pb⟩ bond angle and increase in Pb–I bond length lead to an abrupt blue shift of the excitonic bandgap. The presence of the P21/a phase above 1.4 GPa increases the ⟨Pb–I–Pb⟩ bond angle and decreases the Pb–I bond length, leading to a deep red shift of the excitonic bandgap. The total band gap narrowing of ∼350 meV to 2.03 eV at 5.3 GPa before amorphization, facilitates (C4H9NH3)2PbI4 as a much better solar absorber. Moreover, phase transitions inevitably modify the carrier lifetime of (C4H9NH3)2PbI4, where an initial 150 ps at ambient phase is prolongated to 190 ps in the Pbca (1a) phase along with enhanced photoluminescence (PL), originating from pressure-induced strong radiative recombination of trapped excitons.The onset of P21/a phase shortens significantly the carrier lifetime to 53 ps along with a weak PL emission due to pressure-induced severe lattice distortion and amorphization. High-pressure study on (C4H9NH3)2PbI4 nm-thin flakes may provide insights into the mechanisms for synthetically designing novel 2D hybrid perovskite based photoelectronic devices and solar cells. Ministry of Education (MOE) Accepted version T.T.Y., J.X.Y., and Z.X.S, gratefully acknowledge the Ministry of Education (MOE) for the following grants: AcRF Tier 1 (Reference No: RG103/16); AcRF Tier 2 (MOE2015-T2-1- 148); AcRF Tier 3 (MOE2011-T3-1-005). J.X.Y. is supported by the National Natural Science Foundation of China (Grant No. 11704185) and the Natural Science Foundation of Jiangsu Province, China (Grant No. BK20171021). T.C.S. receives funding from the Ministry of Education Academic Research Fund Tier 1 Grant RG173/16, Tier 2 Grants MOE2015-T2-2- 015 and MOE2016-T2-1-034, and from the Singapore (NRF) through the Singapore−Berkeley Research Initiative for Sustainable Energy (SinBeRISE) CREATE Program and the Competitive Research Program NRF-CRP14-2014-03. S.H.W. is supported by the National Key Basic Research Program of China (2016YFB0700700) and National Natural Science Foundation of China (51672023, 11634003, U1530401). S.J. and J.F. thank Dr. Zhongwu Wang and Dr. Ruipeng Li for their assistance and acknowledge the support from Custom Electronics Inc. and Binghamton University. CHESS was supported by the NSF award DMR-1332208.

Bimetallic nanocrystals (NCs), associated with various surface functions such as ligand effect, ensemble effect, and strain effect, exhibit superior electrocatalytic properties. The stress-induced surface strain effect can alter binding strength between the surface active sites and reactants as well as their intermediates, and the electrochemical performance of bimetallic NCs can be significantly facilitated by the lattice-strain modification via their morphologies, sizes, shell-thickness, surface defectiveness as well as compositions. In this review, an overview of fundamental principles, characterization techniques, and quantitative determination of the surface lattice strain is provided. Various strategies and synthesis efforts on creating lattice-strain-engineered bimetallic NCs, including the de-alloying process, atomic layer-by-layer deposition, thermal treatment evolution, one-pot synthesis, and other efforts are also discussed. It is further outlined how the lattice strain effect promotes electrochemical catalysis through the selected case studies. The reactions on oxygen reduction reaction, small molecular oxidation, water splitting reaction, and electrochemical carbon dioxide reduction reactions are focused. In particular, studies of lattice strain arisen from core-shell nanostructure and defectiveness are highlighted. Lastly, the potential challenges are summarized and the prospects of lattice-strain-based engineering on bimetallic nanocatalysts with suggestion and guidance of the future electrocatalyst design are envisioned.

A facile electrochemical etching approach was developed and implemented to enhance the electrocatalytic performance of Pd-Cu films for oxygen reduction reaction (ORR) in alkaline media. The nanoporous (np) Pd-Cu was synthesized through electrochemical de-alloying of pre-deposited Pd-Cu films. Scanning electron microscopy (SEM) with energy dispersive spectroscopy was employed to confirm the residual amount of Cu in the np structure. The accordingly prepared np catalysts showed excellent ORR activity up to 1.11 A/mgPd at a potential of 0.9 V vs. RHE which is around 22-times and 6.2-times higher than that of a plain Pd film and commercial Pd/C catalyst, respectively. The ORR activity enhancement is attributed to the unique porous structure, large Pd surface area, and modified electronic structure of Pd with residual Cu as confirmed by the SEM, hydrogen underpotential deposition, and CO stripping characterizations. The np Pd-Cu catalyst also showed excellent durability which is manifested by a negligible decrease in the half-wave potential (4 mV negative shift) after 10,000 potential cycles in alkaline media. These findings provide insights into the rational design of an electrocatalyst's structure utilizing an electrochemical de-alloying method to achieve high atomic utilization and improved catalytic performance.

The endoplasmic reticulum (ER) stress occurs frequently in cancers. The unfolded protein response (UPR) is activated to cope with ER stress. This has generated widespread interest in targeting UPR as therapeutic strategies. Inositol-requiring transmembrane kinase/endonuclease 1α (IRE1α), an ER stress sensor, is a key component of UPR. However, the role of IRE1α in tumorigenesis remains unclear. The purpose of this work is to investigate the role of IRE1α in colon cancer and to determine whether IRE1α could serve as a target for therapy. We found that knockdown of IRE1α suppressed the proliferation of colon cancer cells in vitro and xenograft growth in vivo. Inhibition of expression of IRE1α decreased stemness of colon cancer stem cells (CSCs) and attenuated growth of intestinal organoids. Genetic ablation of IRE1α prevented the colitis-associated colonic tumorigenesis in mice. The mechanistic study indicates that knockdown of IRE1α repressed the expression of β-catenin, a key factor that drives colonic tumorigenesis, through activating pancreatic ER kinase/eukaryotic translation initiation factor 2α signaling. We found that the IRE1a-specific inhibitor 4μ8C could suppress the production of β-catenin, inhibited the proliferation of colon cancer cells, repressed colon CSCs and prevented xenograft growth. The results suggest that IRE1α has a critical role in colonic tumorigenesis and IRE1α targeting might be a strategy for treatment of colon cancers.

Chemically controlling crystal structures in nanoscale is challenging, yet provides an effective way to improve catalytic performances. Pt-based nanoframes are a new class of nanomaterials that have great potential as high-performance catalysts. To date, these nanoframes are formed through acid etching in aqueous solutions, which demands long reaction time and often yields ill-defined surface structures. Herein we demonstrate a robust and unprecedented protocol for facile development of high-performance nanoframe catalysts using size and crystallographic facet-controlled PtNi4 tetrahexahedral nanocrystals prepared through a colloidal synthesis approach as precursors. This new protocol employs the Mond process to preferentially dealloy nickel component in the ⟨100⟩ direction through carbon monoxide etching of carbon-supported PtNi4 tetrahexahedral nanocrystals at an elevated temperature. The resultant Pt3Ni alloy tetrahexahedral nanoframes possess an open, stable, and high-indexed microstructure, containin...

InP nanowires, synthesized through a self-seeded growth approach, are used in the fabrication of field-effect transistors which consist of source, drain, and back-gate electrodes. The weak gating voltage dependence implies low carrier concentrations whereas its behavior reveals native n -type doping in InP nanowires. These InP nanowire devices exhibit a vast variation of room-temperature resistance that raises a question about contact resistance. For devices of low room-temperature resistance, electron transport in InP nanowires is investigated using temperature dependent resistance in the temperature range between 80 and 300 K, and it can be analyzed using the model of thermal activation. For other devices of high room-temperature resistance, we take into account nanocontact resistance. Models of both Schottky contact and Mott's variable range hopping (VRH) are considered. The two resistances are connected in parallel to give total contact resistance of InP nanowire devices. After fitting experimental data by the proposed model, we estimate effective Schottky barriers and disorder contributions to nanocontact resistance. The effective Schottky barrier, and the nanocontact Schottky and Mott's VRH resistances are plotted as a function of the device room-temperature resistance which indicates the scale of disorder. Using room-temperature resistance of InP nanowire devices, the devices are classified into nanowire- or contact-dominated devices. The two different class of devices are used to check their photo- and gas-sensitivities. The contact-dominated InP nanowire devices show low dark current and low photocurrent as usual, but these contact-dominated devices give high ratio of photo- to dark-current. That result reveals a high photo-sensitivity for those devices of high nanocontact resistance. On the other hand, for gas sensing experiments, the contact-dominated devices show as well a high ratio of resistance under O 2 to that under N 2 gas exposure.

Understanding the shape-dependent superlattices and resultant anisotropies of both structure and property allows for rational design of materials processing and engineering to fabricate transformative materials with useful properties for applications. This work shows the structural evolution from square lattice of two-dimensional (2D) thin film to rhombic lattice of large three-dimensional (3D) assembles of Pt3Co nanocubes (NCs). Synchrotron-based X-ray supercrystallography determines the superlattice of large 3D supercrystal into an obtuse rhombohedral (Rh) symmetry, which holds a long-range coherence of both NC translation and atomic crystallographic orientation. The Rh superlattice has a trigonal cell angle of 104°, and the constitute NCs orient their atomic Pt3Co(111) planes to the superlattice Rh[111] direction. The temperature-dependent in situ small and wide-angle X-ray scattering (SAXS/WAXS) measurements reveal a thermally induced superlattice contraction of supercrystal, which maintains translati...

Resolving the structure-property relationships of two-dimensional (2D) organic-inorganic hybrid perovskites is essential for the development of photovoltaic and photoelectronic devices. Here, pressure (0-10 GPa) was applied to 2D hybrid perovskite flakes mechanically exfoliated from butylammonium lead halide single crystals, (C

High pressure is an effective means for tuning the interparticle distances of nanoparticle (NP) superlattices and thus for modifying their physical properties and functionalities. In this work, we determined the evolution of inter-NP distances of a Pt NP superlattice with increasing pressure using an in situ synchrotron small-angle X-ray scattering (SAXS) technique in a diamond-anvil cell (DAC). Transmission electron microscopy (TEM) was used to characterize the microstructures of pre- and post-compression samples. Our results demonstrate that the evolution of Pt NP assemblies with increasing pressure consists of four stages: (1) ligand elastic response, (2) uniform compression, (3) ligand detachment from NP surfaces, and (4) deviatoric compression of ligands between neighboring NPs. By controlling the magnitudes of applied pressure and deviatoric stress, one can sinter NPs into novel architectures such as nanowires and nanoceramics.

The development of visible-light-responsive photocatalysts is a promising challenge in the management of environmental pollution. Silver–silver halide nano-photocatalysts have received intensive attention due to their excellent photocatalytic performance in recent years, where silver nanoparticles/nanoclusters demonstrate plasmonic enhanced light absorption efficiency and have been considered as an important component in various functional photocatalytic nanocomposite materials, serving for harvesting visible light. This review provides an overall survey on the state-of-the-art silver–silver halide-based photocatalysts, fundamental understanding of their plasmonically induced photo-reactions and their major environmental applications. We first discuss the basic concepts of localized surface plasmon resonance, and outline the general mechanism of silver–silver halide-based photocatalysis. We then discuss the latest progress in the design and fabrication of silver halide based photocatalysis using various strategies. Next, we highlight some selected examples to demonstrate the new applications of silver/silver halide nano-photocatalysts. Eventually, we provide an outlook of the present challenges and some perspectives of new directions in this interesting and emerging research area.

In a recent report, a dynamically regulated processing approach used to align Ag nanowires was developed and applied to the fabrication of bi-functional extracellular matrix. The surface-enhanced Raman scattering characteristic of cells on this substrate demonstrated advancement in the direction of mechanistic study on cellular adhesion and stretched growth.

Pressure-induced crystallographic transitions and optical behavior of MAPbI3 (MA=methylammonium) were investigated using in-situ synchrotron X-ray diffraction and laser-excited photoluminescence spectroscopy. We observed that the tetragonal phase that presents under ambient pressure transformed to a ReO3-type cubic phase at 0.3 GPa, which further converted into a putative orthorhombic structure at 2.7 GPa. The sample was finally separated into crystalline and amorphous fractions beyond 4.7 GPa. During the decompression, the phase-mixed material restored the original structure in two distinct pathways depending on the peak pressures. Being monitored using a laser-excited photoluminescence technique under each applied pressure, it was determined that the bandgap reduced with an increase of the pressure till 0.3 GPa and then enlarged with an increase of the pressure up to 2.7 GPa. This work lays the foundation for understanding pressure-induced phase transitions and bandgap tuning of MAPbI3, enriching potentially the toolkit for engineering perovskites related photovoltaic devices. National Research Foundation (NRF) Accepted version This work was partially supported by NRF-CRP14-2014-03 and Custom Electronics, Inc. CHESS was supported by the NSF award DMR-1332208. Bandgap calculations were contributed by Hai Xiao, Jason Crowley and William A. Goddard III from Materials and Process Simulation Center (MSC) and Joint Center for Artificial Photosynthesis (JCAP), California Institute of Technology. S.J. acknowledges the support from Binghamton University.

The assembly of nanocrystals into ordered structures called supercrystals or superstructures has become a pivotal frontier owing to numerous useful applications such as correlating the arrangements of atoms in macroscopic crystals and tuning the collective properties to meet the demands of various applications. In this article, recent progress in the preparation of three-dimensional superlattices of nanocrystals is outlined, with a particular emphasis on the driving forces and evolutionary routes beyond orderly assembly. First, the leading or repulsive forces that internally and externally govern the formation of three-dimensional supercrystals are systematically identified and discussed with respect to their origins and functions in three-dimensional self-organization. Then a synoptic introduction of commonly applied means of nanocrystal self-assembly based on growth scenarios such as droplet evaporation and a liquid/liquid interface is presented with specific cases and detailed analyses. Finally, the existing challenges and prospects for this field are briefly highlighted.

The synthesis of noble metal nanocrystals terminated with high-index facets has received increasing attention due to the remarkable improvement in their catalytic performance. Introducing a transition metal to noble metals (bimetallic nanocrystals) could result in a reduced cost and potentially improve properties. Keeping in mind both of these advantages, we have developed a new synthetic approach to fabricate size-controlled Pt3Fe concave nanocubes using a high-temperature organic solution system containing oleylamine and oleic acid. It further demonstrates that the particle size and concavity could be controlled by a number of parameters such as the ratio of oleylamine and oleic acid, the physicochemical properties of the metal carbonyl, the metal valence in the precursor, and the ratio of metal precursors. Catalytic tests show that the high-index-surface-terminated ≈12 nm Pt3Fe concave nanocubes exhibit superior performance in both the hydrogenation of styrene and reduction of 4-nitrophenol in comparison with their counterparts.

Nanostructured lead sulphide is a significant component in a number of energy-related sustainable applications such as photovoltaic cells and thermoelectric components. In many micro-packaging processes, dimensionality-controlled nano-architectures as building blocks with unique properties are required. This study investigates different facet-merging growth behaviors through a wet-chemical synthetic strategy to produce high-quality controlled nanostructures of lead sulphide in various dimensionalities. It was found that 1D nanowires or 2D nanosheets can be obtained by the merging of reactive {111}- or {110}-facets, respectively, while promoting {100} facets in the early stages after nucleation leads to the growth of 0D nanocubes. The influence of temperature, capping ligands and co-solvent in facilitating the crystal facet growth of each intermediate seed is also demonstrated. The novelty of this work is characterized by the delicate manipulation of various PbS nanoarchitectures based on the comprehension of the facet-merging evolution. The synthesis of facet-controlled PbS nanostructures could provide novel building blocks with desired properties for use in many applications.

High pressure (HP) can drive the direct sintering of nanoparticle assemblies for Ag/Au, CdSe/PbS nanocrystals (NCs). Instead of direct sintering for the conventional nanocrystals, this study experimentally observes for the first time high-pressure-induced comminution and recrystallization of organic-inorganic hybrid perovskite nanocrystals into highly luminescent nanoplates with a shorter carrier lifetime. Such novel pressure response is attributed to the unique structural nature of hybrid perovskites under high pressure: during the drastic cubic-orthorhombic structural transformation at ≈2 GPa, (301) the crystal plane fully occupied by organic molecules possesses a higher surface energy, triggering the comminution of nanocrystals into nanoslices along such crystal plane. Beyond bulk perovskites, in which pressure-induced modifications on crystal structures and functional properties will disappear after pressure release, the pressure-formed variants, i.e., large (≈100 nm) and thin (10 nm) perovskite nanoplates, are retained and these exhibit simultaneous photoluminescence emission enhancing (a 15-fold enhancement in the photoluminescence) and carrier lifetime shortening (from ≈18.3 ± 0.8 to ≈7.6 ± 0.5 ns) after releasing of pressure from 11 GPa. This pressure-induced comminution of hybrid perovskite NCs and a subsequent amorphization-recrystallization treatment offer the possibilities of engineering the advanced hybrid perovskites with specific properties.

Chemically controlling crystal structures in nanoscale is challenging, yet provides an effective way to improve catalytic performances. Pt-based nanoframes are a new class of nanomaterials that have great potential as high-performance catalysts. To date, these nanoframes are formed through acid etching in aqueous solutions, which demands long reaction time and often yields ill-defined surface structures. Herein we demonstrate a robust and unprecedented protocol for facile development of high-performance nanoframe catalysts using size and crystallographic facet-controlled PtNi

Summary In recent years, the syntheses of III–V quantum dots have attracted extensive interests because of their remarkable quantum-confinement-effects, other attractive properties such as large exciton radius and potential applications in a number of areas such as gas sensing and biological probing. Some III–V members are low toxic and suitable to be used in bio-system with their excellent fluorescent characteristics. Although a solution-phase preparation of III–V quantum dots has become possible, the synthesis approach is still in its infancy and the quality of III–V products is inferior to those of II–VI and IV–VI quantum dots due to some difficulties such as lack of suitable precursors, high covalent characteristic, and difficult control of their nucleation and growth. The size, size distribution and crystallinity are strongly dependent on a specific reaction procedure and preparation technique. It is also believed that the selection of suitable precursors and designing corresponding key reactions should hold the keys for a successful production of the desired III–V quantum dots. This article focuses on the solution-phase synthesis of In- and Ga-based III–V quantum dots, and these developments are presented through a classification of their chemical routes including metathesis, thermolysis, dehalosilylation and transmetalation with a discussion on their preparation techniques such as one-pot heating-up and hot-injection. Furthermore, III–V quantum dots acted in gas sensing and bio-imaging applications are outlined as well. Eventually, an outlook of current challenges and promising direction for the development of III–V quantum dot synthesis is provided.

Self-organization of colloidal Pt nanocubes into two types of distinct ordered superlattices, simple-cubic and body-centered-tetragonal structures, has been achieved using a home-built setup. Detailed translational and orientational characteristics of these superstructures were determined using a transmission electron microscopy tomographic technique with 3D reconstruction analysis. The formation of these distinct superlattices is the result of a delicate choice of solvent (i.e., aliphatic hexane or aromatic toluene hydrocarbons), which serves as a dispersion medium to fine-tune the relative strengths of ligand-ligand and ligand-solvent interactions during the self-assembly process. This work provides important insights into the effects of ligand-solvent interactions on superlattice formation from nonspherical nanoparticles.

Some transfer students have significant challenges in adapting to the pace and depth of a competitive four-year University. According to the National Student Clearinghouse Research Center, only 60% of transfer students from community colleges have earned their baccalaureate degree four years after transferring. In this paper, we present our program designed to increase the success rate of transfer students. Our goal is to continue Binghamton University's tradition of providing an effective collegiate learning environment for all, and particularly, to increase the success rate of the transfer students in STEM fields.

We report the pressure-induced crystallographic transitions and optical behavior of MAPbI3 (MA=methylammonium) using in situ synchrotron X-ray diffraction and laser-excited photoluminescence spectroscopy, supported by density functional theory (DFT) calculations using the hybrid functional B3PW91 with spin-orbit coupling. The tetragonal polymorph determined at ambient pressure transforms to a ReO3-type cubic phase at 0.3 GPa. Upon continuous compression to 2.7 GPa this cubic polymorph converts into a putative orthorhombic structure. Beyond 4.7 GPa it separates into crystalline and amorphous fractions. During decompression, this phase-mixed material undergoes distinct restoration pathways depending on the peak pressure. In situ pressure photoluminescence investigation suggests a reduction in band gap with increasing pressure up to ≈0.3 GPa and then an increase in band gap up to a pressure of 2.7 GPa, in excellent agreement with our DFT calculation prediction. This work lays the foundation for understanding the pressure-dependent phase transition of MAPbI3 and potentially enriches the toolkit for engineering perovskite polymorphs with exceptional optical properties. NRF (Natl Research Foundation, S’pore) Accepted version

Single-phase Bi0.85La0.15FeO3 ceramics were synthesized under various magnetic fields (Ha=0 T, 3 T, 5 T). Substantially reduced leakage current and hence modified ferroelectric (FE) properties were obtained with magnetic field annealing (MA). The largest magnetization and lowest leakage current with large FE polarization (Pr∼33 μC/cm2) were found in the sample annealed with Ha=3 T. Great changes were also observed in the Raman spectra. All the observed features originate mainly from the different FE domain wall structures induced by MA. These results demonstrate that MA is an effective way to tune the multiferroic and magnetoelectric properties in BiFeO3-based materials.

We report a Kirkwood-Alder transition in a system of nonspherical Pt(3)Cu(2) nanoctahedra coated with oleic acid and oleylamine ligands. Using both transmission electron microscopy tomography with 3D reconstruction analysis and synchrotron-based in-situ grazing-incidence small-angle X-ray scattering (GISAXS) techniques, we specifically determined that these nanoctahedra can assemble into an open structure in which the nanoctahedra are arranged tip-to-tip to form a bcc superlattice with a low packing efficiency. Using in-situ and real-time GISAXS, we further observed a "nanoctahedron crystallization" as a soft Kirkwood-Alder transition, that is, the soft nanoactahedra crystallize at a critical concentration and possess continuous crystalline states during a period of solvent evaporation. Finally, we found a reversible change of the superlattice constant during the solvent annealing and evaporation/drying processes.