Search

Streptomyces mobaraenesis transglutaminase (smTG) can be used for site-specific labeling of proteins with chemical groups. Here, we explored the use of modified smTG for the biosynthesis of nanobody-fluorophore conjugates (NFC). smTG catalyzes the conjugation of acyl donors containing glutamine with lysine-containing acceptors, which can lead to non-specific cross-linking. To achieve precise site-specific labeling, we employed molecular docking and virtual mutagenesis to redesign the enzyme's substrate specificity towards the peptide GGGGQR, a non-preferred acyl donor for smTG. Starting with a thermostable and highly active smTG variant (TGm2), we identified that single mutations G250H and Y278E significantly enhanced activity against GGGGQR, increasing it by 41 % and 1.13-fold, respectively. Notably, the Y278E mutation dramatically shifted the enzyme's substrate preference, with the activity ratio against GGGGQR versus the standard substrate CBZ-Gln-Gly rising from 0.05 to 0.93. In case studies, we used nanobodies 1C12 and 7D12 as labeling targets, catalyzing their conjugation with a synthetic fluorophore via smTG variants. Nanobodies fused with GGGGQR were successfully site-specifically labeled by TGm2-Y278E, in contrast to non-specific labeling observed with other variants. These results suggest that engineering smTG for site-specific labeling is a promising approach for the biosynthesis of antibody-drug conjugates.

The diterpene ent-copalol is an important precursor to the synthesis of andrographolide and is found only in green chiretta (Andrographis paniculata). De novo biosynthesis of ent-copalol has not been reported, because the catalytic activity of ent-copalyl diphosphate synthase (CPS) is very low in microorganisms. In order to achieve the biosynthesis of ent-copalol, Saccharomyces cerevisiae was selected as the chassis strain, because its endogenous mevalonate pathway and dephosphorylases could provide natural promotion for the synthesis of ent-copalol. The strain capable of synthesizing diterpene geranylgeranyl pyrophosphate was constructed by strengthening the mevalonate pathway genes and weakening the competing pathway. Five full-length ApCPSs were screened by transcriptome sequencing of A. paniculata and ApCPS2 had the best activity and produced ent-CPP exclusively. The peak area of ent-copalol was increased after the ApCPS2 saturation mutation and its configuration was determined by NMR and ESI-MS detection. By appropriately optimizing acetyl-CoA supply and fusion-expressing key enzymes, 35.6 mg/L ent-copalol was generated. In this study, de novo biosynthesis and identification of ent-copalol were achieved and the highest titer ever reported. It provides a platform strain for the further pathway analysis of andrographolide and derivatives and provides a reference for the synthesis of other pharmaceutical intermediates.

Thoracic aortic dissection (TAD) is a life-threatening vascular disease manifested as intramural bleeding in the medial layers of the thoracic aorta. The key histopathologic feature of TAD is medial degeneration, characterized by depletion of vascular smooth muscle cells (VSMCs) and degradation of extracellular matrix (ECM). MicroRNA, as essential epigenetic regulators, can inhibit the protein expression of target genes without modifying the sequences. This study aimed to elucidate the role and underlying mechanism of miR-20a, a member of the miR-17-92 cluster, in regulating ECM degradation during the pathogenesis of TAD. The expression of the miR-17-92 cluster was significantly increased in synthetic VSMCs derived from TAD lesions compared to contractile VSMCs isolated from normal thoracic aortas. Notably, the expression of miR-20a was increased in VSMCs in response to serum exposure and various stimuli. In TAD lesions, the expression of miR-20a was significantly negatively correlated with that of elastin. Elevated expression of miR-20a was also observed in thoracic aortas of TAD mice induced by β-aminopropionitrile fumarate and angiotensin II. Overexpression of miR-20a via mimic transfection enhanced the growth and invasive capabilities of VSMCs, with no significant impact on their migratory activity or the expression of phenotypic markers (α-SMA, SM22, and OPN). Silencing of miR-20a with inhibitor transfection mitigated the hyperactivation of MMP2 in VSMCs stimulated by PDGF-bb, as evidenced by reduced levels of active-MMP2 and increased levels of pro-MMP2. Subsequently, TIMP2 was identified as a novel target gene of miR-20a. The role of miR-20a in promoting the activation of MMP2 was mediated by the suppression of TIMP2 expression in VSMCs. In addition, the elevated expression of miR-20a was found to be directly driven by Nanog in VSMCs. Collectively, these findings indicate that miR-20a plays a crucial role in maintaining the homeostasis of the thoracic aortic wall during TAD pathogenesis and may represent a potential therapeutic target for TAD.

Collagen XVII (COL17) is a transmembrane protein that mediates skin homeostasis. Due to expression of full length collagen was hard to achieve in microorganisms, arising the needs for selection of collagen fragments with desired functions for microbial biosynthesis. Here, COL17 fragments (27–33 amino acids) were extracted and replicated 16 times for recombinant expression in Escherichia coli. Five variants were soluble expressed, with the highest yield of 223 mg/L. The fusion tag was removed for biochemical and biophysical characterization. Circular dichroism results suggested one variant (sample-1707) with a triple-helix structure at >37 °C. Sample-1707 can assemble into nanofiber (width, 5.6 nm) and form hydrogel at 3 mg/mL. Sample-1707 was shown to induce blood clotting and promote osteoblast differentiation. Furthermore, sample-1707 exhibited high capacity to induce mouse hair follicle stem cells differentiation and osteoblast migration, demonstrating a high capacity to induce skin cell regeneration and promote wound healing. A strong hydrogel was prepared from a chitosan and sample-1707 complex with a swelling rate of >30 % higher than simply using chitosan. Fed-batch fermentation of sample-1707 with a 5-L bioreactor obtained a yield of 600 mg/L. These results support the large-scale production of sample-1707 as a biomaterial for use in the skin care industry.

Abstract Background Long-term treatment with trimethoprim-sulfamethoxazole (SXT) can lead to the formation of small-colony variants (SCVs) of Staphylococcus aureus. However, the mechanism behind SCVs formation remains poorly understood. In this study, we explored the phenotype and omics-based characterization of S. aureus SCVs induced by SXT and shed light on the potential causes of SCV formation. Methods Stable SCVs were obtained by continuously treating S. aureus isolates using 12/238 µg/ml of SXT, characterized by growth kinetics, antibiotic susceptibility testing, and auxotrophism test. Subsequently, a pair of representative strains (SCV and its parental strain) were selected for genomic, transcriptomic and metabolomic analysis. Results Three stable S. aureus SCVs were successfully screened and proven to be homologous to their corresponding parental strains. Phenotypic tests showed that all SCVs were non-classical mechanisms associated with impaired utilization of menadione, heme and thymine, and exhibited slower growth and higher antibiotic minimum inhibitory concentrations (MICs), compared to their corresponding parental strains. Genomic data revealed 15 missense mutations in 13 genes in the representative SCV, which were involved in adhesion, intramolecular phosphate transfer on ribose, transport pathways, and phage-encoded proteins. The combination analysis of transcriptome and metabolome identified 35 overlapping pathways possible associated with the phenotype switching of S. aureus. These pathways mainly included changes in metabolism, such as purine metabolism, pyruvate metabolism, amino acid metabolism, and ABC transporters, which could play a crucial role in promoting SCVs development by affecting nucleic acid synthesis and energy metabolism in bacteria. Conclusion This study provides profound insights into the causes of S. aureus SCV formation induced by SXT. The findings may offer valuable clues for developing new strategies to combat S. aureus SCV infections.

Gluconobacter oxydans is an important Gram-negative industrial microorganism that produces vitamin C and other products due to its efficient membrane-bound dehydrogenase system. Its incomplete oxidation system has many crucial industrial applications. However, it also leads to slow growth and low biomass, requiring further metabolic modification for balancing the cell growth and incomplete oxidation process. As a non-model strain, G. oxydans lacks efficient genome editing tools and cannot perform rapid multi-gene editing and complex metabolic network regulation. In the last 15 years, our laboratory attempted to deploy multiple CRISPR/Cas systems in different G. oxydans strains and found none of them as functional. In this study, Cpf1-based or dCpf1-based CRISPRi was constructed to explore the targeted binding ability of Cpf1, while Cpf1–FokI was deployed to study its nuclease activity. A study on Cpf1 found that the CRISPR/Cpf1 system could locate the target genes in G. oxydans but lacked the nuclease cleavage activity. Therefore, the CRISPR/Cpf1–FokI system based on FokI nuclease was constructed. Single-gene knockout with efficiency up to 100% and double-gene iterative editing were achieved in G. oxydans. Using this system, AcrVA6, the anti-CRISPR protein of G. oxydans was discovered for the first time, and efficient genome editing was realized.

Aspergillus niger is a highly versatile fungal strain utilized in industrial production. The expression levels of recombinant genes in A. niger can be enhanced by increasing the copy number. Nevertheless, given the prolonged gene editing cycle of A. niger, a “one-step” strategy facilitating the simultaneous integration of recombinant genes into multiple genomic loci would provide a definitive advantage. In our previous study, a visual multigene editing system (VMS) was designed to knock out five genes, employing a tRNA-sgRNA array that includes the pigment gene albA and the target genes. Building upon this system, hybrid donor DNAs (dDNAs) were introduced to establish a clustered regularly interspaced short palindromic repeats (CRISPR)-based multiplex integration toolkit. Firstly, a CRISPR-Cas9 homology-directed repair (CRISPR-HDR) system was constructed in A. niger by co-transforming the CRISPR-Cas9 plasmid (with a highly efficient sgRNA) and the dDNA, resulting in precise integration of recombinant xylanase gene xynA into the target loci (the β-glucosidase gene bgl, the amylase gene amyA, and the acid amylase gene ammA). Subsequently, the length of homology arms in the dDNA was optimized to achieve 100% editing efficiency at each of the three gene loci. To achieve efficient multiplex integration in A. niger, the CRISPR plasmid pLM2 carrying a sgRNA-tRNA array was employed for concurrent double-strand breaks at multiple loci (bgl, amyA, ammA, and albA). Hybrid dDNAs were then employed for repair, including dDNA1-3 (containing xynA expression cassettes without selection markers) and dDNAalbA (for albA knockout). Among the obtained white colonies (RLM2′), 23.5% exhibited concurrent replacement of the bgl, amyA, and ammA genes with xynA (three copies). Notably, the xynA activity obtained by simultaneous insertion into three loci was 48.6% higher compared to that obtained by insertion into only the bgl locus. Furthermore, this multiple integration toolkit successfully enhanced the expression of endogenous pectinase pelA and Candida antarctica lipase CALB. Hence, the combined application of VMS and the CRISPR-HDR system enabled the simultaneous application of multiple selection markers, facilitating the rapid generation in the A. niger cell factories.

Abstract Pulmonary arterial hypertension (PAH) is associated with aberrant pulmonary vascular smooth muscle cell (PASMC) function and vascular remodeling. MiR‐30d plays an important role in the pathogenesis of several cardiovascular disorders. However, the function of miR‐30d in PAH progression remained unknown. Our study shows that circulating miR‐30d level is significantly reduced in the plasma from PAH patients. In miR‐30d transgenic (TG) rats, overexpressing miR‐30d attenuates monocrotaline (MCT)‐induced pulmonary hypertension (PH) and pulmonary vascular remodeling. Increasing miR‐30d also inhibits platelet‐derived growth factor‐bb (PDGF‐bb)‐induced proliferation and migration of human PASMC. Metadherin (MTDH) and phosphodiesterase 5A (PDE5A) are identified as direct target genes of miR‐30d. Meanwhile, nuclear respiratory factor 1 (NRF1) acts as a positive upstream regulator of miR‐30d. Using miR‐30d knockout (KO) rats treated with sildenafil, a PDE5A inhibitor that is used in clinical PAH therapies, it is further found that suppressing miR‐30d partially attenuates the beneficial effect of sildenafil against MCT‐induced PH and vascular remodeling. The present study shows a protective effect of miR‐30d against PAH and pulmonary vascular remodeling through targeting MTDH and PDE5A and reveals that miR‐30d modulates the beneficial effect of sildenafil in treating PAH. MiR‐30d should be a prospective target to treat PAH and pulmonary vascular remodeling.

Abstract Background Chronic myeloid leukemia (CML) is a common hematological malignancy, and tyrosine kinase inhibitors (TKIs) represent the primary therapeutic approach for CML. Activation of metabolism signaling pathway has been connected with BCR::ABL1-independent TKIs resistance in CML cells. However, the specific mechanism by which metabolism signaling mediates this drug resistance remains unclear. Here, we identified one relationship between glutamine synthetase (GS) and BCR::ABL1-independent Imatinib resistance in CML cells. Methods GS and PXN-AS1 in bone marrow samples of CML patients with Imatinib resistance (IR) were screened and detected by whole transcriptome sequencing. GS expression was upregulated using LVs and blocked using shRNAs respectively, then GS expression, Gln content, and cell cycle progression were respectively tested. The CML IR mice model were established by tail vein injection, prognosis of CML IR mice model were evaluated by Kaplan–Meier analysis, the ratio of spleen/body weight, HE staining, and IHC. PXN-AS1 level was blocked using shRNAs, and the effects of PXN-AS1 on CML IR cells in vitro and in vivo were tested the same as GS. Several RNA-RNA tools were used to predict the potential target microRNAs binding to both GS and PXN-AS1. RNA mimics and RNA inhibitors were used to explore the mechanism through which PXN-AS1 regulates miR-635 or miR-635 regulates GS. Results GS was highly expressed in the bone marrow samples of CML patients with Imatinib resistance. In addition, the lncRNA PXN-AS1 was found to mediate GS expression and disorder cell cycle in CML IR cells via mTOR signaling pathway. PXN-AS1 regulated GS expression by binding to miR-635. Additionally, knockdown of PXN-AS1 attenuated BCR::ABL1-independent Imatinib resistance in CML cells via PXN-AS1/miR-635/GS/Gln/mTOR signaling pathway. Conclusions Thus, PXN-AS1 promotes GS-mediated BCR::ABL1-independent Imatinib resistance in CML cells via cell cycle signaling pathway. Graphic Abstract

Herlyn-Werner-Wunderlich syndrome (HWWS) is a rare congenital genitourinary abnormality defined by uterine didelphys, obstructed hemivagina, and ipsilateral urological anomalies. Accurate diagnosis and prompt commencement of therapy can be difficult owing to heterogeneous genitourinary malformation among different patients. This is a case report of a patient with rare HWWS with uterine didelphys, obstructed hemivagina, vagina-ureteral remnant fistula (Gartner's duct cyst), and ipsilateral kidney dysgenesis who complained of intermittent abdominal pain during menstruation. The right ureteral remnant of the patient was distinctive, with three portions. The upper section was connected to the right dysplastic kidney, the lower section formed the fistulous tract with the vagina and bladder, while the middle section communicated with Gartner's Duct Cyst, which merged with the vagina and opened to the posterior cavity of hemivagina. The lower section of the right ureter was excised and ligated during laparoscopic surgery, while the upper section was excised. The patient recovered after surgery. We presented this rare case and conducted a literature review to provide a more comprehensive understanding of HWWS. This could help gynecologists effectively reduce misdiagnosis and missed diagnosis, especially when combined with complicated urinary malformation.

Abstract Background Classical directed evolution is a powerful approach for engineering biomolecules with improved or novel functions. However, it traditionally relies on labour- and time-intensive iterative cycles, due in part to the need for multiple molecular biology steps, including DNA transformation, and limited screening throughput. Results In this study, we present an ultrahigh throughput in vivo continuous directed evolution system with thermosensitive inducible tunability, which is based on error-prone DNA polymerase expression modulated by engineered thermal-responsive repressor cI857, and genomic MutS mutant with temperature-sensitive defect for fixation of mutations in Escherichia coli. We demonstrated the success of the in vivo evolution platform with β-lactamase as a model, with an approximately 600-fold increase in the targeted mutation rate. Furthermore, the platform was combined with ultrahigh-throughput screening methods and employed to evolve α-amylase and the resveratrol biosynthetic pathway. After iterative rounds of enrichment, a mutant with a 48.3% improvement in α-amylase activity was identified via microfluidic droplet screening. In addition, when coupled with an in vivo biosensor in the resveratrol biosynthetic pathway, a variant with 1.7-fold higher resveratrol production was selected by fluorescence-activated cell sorting. Conclusions In this study, thermal-responsive targeted mutagenesis coupled with ultrahigh-throughput screening was developed for the rapid evolution of enzymes and biosynthetic pathways.

Deoxycholic acid (DCA) has been authorized by the Federal Drug Agency for cosmetic reduction of redundant submental fat. The hydroxylated product (6β-OH DCA) was developed to improve the solubility and pharmaceutic properties of DCA for further applications. Herein, a combinatorial catalytic strategy was applied to construct a powerful Cytochrome P450 biocatalyst (CYP107D1, OleP) to convert DCA to 6β-OH DCA. Firstly, the weak expression of OleP was significantly improved using pRSFDuet-1 plasmid in the E. coli C41 (DE3) strain. Next, the supply of heme was enhanced by the moderate overexpression of crucial genes in the heme biosynthetic pathway. In addition, a new biosensor was developed to select the appropriate redox partner. Furthermore, a cost-effective whole-cell catalytic system was constructed, resulting in the highest reported conversion rate of 6β-OH DCA (from 4.8% to 99.1%). The combinatorial catalytic strategies applied in this study provide an efficient method to synthesize high-value-added hydroxylated compounds by P450s.

l-Tyrosine, an aromatic non-essential amino acid, is the raw material for many important chemical products, including levodopa, resveratrol, and hydroxytyrosol. It is widely used in the food, drug, and chemical industries. There are many studies on the synthesis of l-tyrosine by microorganisms, however, the low titer of l-tyrosine limited the industrial large-scale production. In order to enhance l-tyrosine production in Escherichia coli, the expression of key enzymes in the shikimate pathway was up- or down-regulated. The l-tyrosine transport system and the acetic acid biosynthesis pathway were modified to further enhance l-tyrosine production. In addition, the phosphoketolase pathway was introduced in combination with cofactor engineering to redirect carbon flux to the shikimate pathway. Finally, after adaptive laboratory evolution to low pH an optimal strain was obtained. The strain can produce 92.5 g/L of l-tyrosine in a 5-L fermenter in 62 h, with a yield of 0.266 g/g glucose.

In this paper, we design and demonstrate an all-fiber-sensitive refractive index (RI) sensor based on the Mach–Zehnder interferometer (MZI). It is constructed by splicing two no-core fibers (NCFs) and a photonic crystal fiber (PCF) between two single-mode fibers (SMFs) to obtain an SMF–NCF–PCF–NCF–SMF composite structure (SNPNS). A study of the effect of varying PCF lengths on the RI reveals that the shorter the length, the higher the sensitivity. The maximum RI sensitivity of 176.9 nm/RIU is attained within the RI range of 1.3365–1.3767 when the PCF length in the SNPNS structure is 3 cm. Meanwhile, the sensor exhibits a high stability in water, with an RSD of only 0.0019% for the interference trough over a duration of two hours. This proposed sensing structure offers the advantages of a large extinction ratio, small size, low temperature sensitivity, and simple fabrication, exhibiting a great potential in RI measurements.

With the passage of time, the constant changes in relevant factors, and the daily maintenance of tailings ponds, the difficulty of tailings pond safety management is increasing day by day. In order to systematically improve the early warning ability for tailings pond dam break risk, the relationship between and influence of various related dam break risk factors of tailings ponds are utilised and the combination with dual attention is innovatively proposed. The risk prediction model for tailings ponds, EEMD-DA-LSTM, is improved. First, Pearson correlation coefficients are used to analyse the correlation between risk factors of tailings ponds. Then, the EEMD method is used to decompose the nonlinear displacement sequence, and the weights of input features are dynamically adjusted by double attention (DA). Finally, the LSTM network model is constructed to predict the displacement change. Taking valley-type tailings pond WKB-1 and mountainside tailings pond WKB-2 as examples, the dam break risk prediction models for tailings ponds are constructed based on three different models, the prediction results of different models are compared and analysed, and the prediction accuracy of the models is evaluated by three different evaluation criteria. The research results show that the integration of the EEMD-LSTM model with the DA model, that is, the EEMD-DA-LSTM model, has a better prediction effect for the dam break risk of tailings ponds WKB-1 and WKB-2 than other models through experimental verification. Therefore, the EEMD-DA-LSTM model is of great significance for preventing and resolving the safety risks of tailings ponds. It is valuable for practitioners in the mining industry and environmentally sustainable development.

Abstract Purpose To investigate the efficacy and safety of tyrosine-kinase inhibitor (TKI) combined with iodine-125 seed brachytherapy (TKI-I) versus TKI alone for patients with hepatocellular carcinoma (HCC) refractory to transarterial chemoembolization (TACE). Methods Data of patients with TACE-refractory HCC who received TKI (sorafenib or lenvatinib) or TKI-I from September 2018 to December 2020 were retrospectively analyzed. A propensity score matching (PSM) was performed to diminish potential bias. The primary endpoints were overall survival (OS) and time to progression (TTP). Tumor responses and treatment-related adverse events (TRAEs) were also compared between the two groups. Results A total of 132 patients were included in this study. Under PSM, 48 paired patients were selected for comparison. The median OS was 23.2 (95% CI 20.9–25.1) months in the TKI-I group versus 13.9 (95% CI 11.1–16.7) months in the TKI group (P

Sulfate transporters (SULTRs) are essential for the transport and absorption of sulfate in plants and serve as critical transport proteins within the sulfur metabolism pathway, significantly influencing plant growth, development, and stress adaptation. A bioinformatics analysis of SULTR genes in soybean was performed, resulting in the identification and classification of twenty-eight putative GmSULTRs into four distinct groups. In this study, the characteristics of the 28 GmSULTR genes, including those involved in collinearity, gene structure, protein motifs, cis-elements, tissue expression patterns, and the response to abiotic stress and plant hormone treatments, were systematically analyzed. This study focused on conducting a preliminary functional analysis of the GmSULTR3;1a gene, wherein a high expression level of GmSULTR3;1a in the roots, stems, and leaves was induced by a sulfur deficiency and GmSULTR3;1a improved the salt tolerance. A further functional characterization revealed that GmSULTR3;1a-overexpressing soybean hairy roots had higher SO42−, GSH, and methionine (Met) contents compared with the wild-type (WT) plant. These results demonstrate that the overexpression of GmSULTR3;1a may promote the sulfur assimilation metabolism and increase the content of sulfur-containing amino acids in plants.

Drought stress is one of the significant abiotic stresses that limit soybean (Glycine max [L.] Merr.) growth and production. Ankyrin repeat (ANK) proteins, being highly conserved, occupy a pivotal role in diverse biological processes. ANK genes were classified into nine subfamilies according to conserved domains in the soybean genome. However, the function of ANK-TM subfamily proteins (Ankyrin repeat proteins with a transmembrane domain) in the abiotic-stress response to soybean remains poorly understood. In this study, we first demonstrated the subcellular localization of GmANKTM21 in the cell membrane and nucleus. Drought stress-induced mRNA levels of GmANKTM21, which encodes proteins belonging to the ANK-TM subfamily, Transgenic 35S:GmANKTM21 soybean improved drought tolerance at the germination and seedling stages, with higher stomatal closure in soybean, lower water loss, lower malondialdehyde (MDA) content, and less reactive oxygen species (ROS) production compared with the wild-type soybean (Dongnong50). RNA-sequencing (RNA-seq) and RT-qPCR analysis of differentially expressed transcripts in overexpression of GmANKTM21 further identified potential downstream genes, including GmSPK2, GmSPK4, and GmCYP707A1, which showed higher expression in transgenic soybean, than those in wild-type soybean and KEGG enrichment analysis showed that MAPK signaling pathways were mostly enriched in GmANKTM21 overexpressing soybean plants under drought stress conditions. Therefore, we demonstrate that GmANKTM21 plays an important role in tolerance to drought stress in soybeans.

Goethite and ferrihydrite are the two major iron hydroxides, essential mineral constituents in the terrestrial surface system. Aluminum (Al) is the most common substituent in iron hydroxides, and it may significantly change the bulk and surficial physicochemical properties of iron hydroxides. Consequently, a practical and convenient approach is needed to efficiently identify the Al substitution degrees of iron hydroxides in natural occurrences. This study presents a comprehensive investigation of the VSWIR characteristics of laboratory-synthesized Al-substituted goethite and ferrihydrite, to establish diagnostic VSWIR parameters for the identification and quantification of Al substitution levels in iron hydroxides. The findings revealed that Al substitution can affect the band positions (P) of goethite and ferrihydrite at ~650 nm, ~900 nm, and ~1400 nm. The relationships between the Al substitution of ferrihydrite and VSWIR parameters can be expressed as P900 = −0.43 × Al(%) + 931 and P1400 = −0.07 × Al(%) + 1428, while that of goethite can be expressed as P650 = 0.42 × Al(%) + 657 and P900 = 2.29 × Al(%) + 936. The peak fitting results showed that the absorption intensity at 480–550 nm linearly decreases with increased Al substitution. The obtained VSWIR spectra of Al-substituted goethite and ferrihydrite provide a critical supplement to the spectral library for (Al) iron hydroxides, and these VSWIR parameters can be utilized for the semi-quantitative determination of Al substitution in natural iron hydroxides

A novel fiber sensor for the refractive index sensing of seawater based on a Mach–Zehnder interferometer has been demonstrated. The sensor consisted of a single-mode fiber (SMF)–no-core fiber (NCF)–single-mode fiber structure (shortened to an SNS structure) with a large lateral offset spliced between the two sections of a multimode fiber (MMF). Optimization studies of the multimode fiber length, offset SNS length, and vertical axial offset distance were performed to improve the coupling efficiency of interference light and achieve the best extinction ratio. In the experiment, a large lateral offset sensor was prepared to detect the refractive index of various ratios of saltwater, which were used to simulate seawater environments. The sensor’s sensitivity was up to −13,703.63 nm/RIU and −13,160 nm/RIU in the refractive index range of 1.3370 to 1.3410 based on the shift of the interference spectrum. Moreover, the sensor showed a good linear response and high stability, with an RSD of only 0.0089% for the trough of the interference in air over 1 h.

Phycocyanobilin (PCB) is widely used in healthcare, food processing, and cosmetics. Escherichia coli is the common engineered bacterium used to produce PCB. However, it still suffers from low production level, precursor deficiency, and low catalytic efficiency. In this study, a highly efficient PCB-producing strain was created. First, chassis strains and enzyme sources were screened, and copy numbers were optimized, affording a PCB titer of 9.1 mg/L. Most importantly, the rate-limiting steps of the PCB biosynthetic pathway were determined, and the supply of precursors necessary for PCB synthesis was increased from endogenous sources, affording a titer of 21.4 mg/L. Then, the key enzymes for PCB synthesis, HO1 and PcyA, were assembled into a multi-enzyme complex using the short peptide tag RIAD-RIDD, and 23.5 mg/L of PCB was obtained. Finally, the basic conditions for PCB fermentation were initially determined in 250 mL shake flasks and a 5-L bioreactor to obtain higher titers of PCB. The final titer of PCB reached 147.0 mg/L, which is the highest reported titer of PCB so far. This research provided the foundation for the industrial production of PCB and its derivatives.

(–)-α-Bisabolol is naturally occurring in many plants and has great potential in health products and pharmaceuticals. However, the current extraction method from natural plants is unsustainable and cannot fulfil the increasing requirement. This study aimed to develop a sustainable strategy to enhance the biosynthesis of (–)-α-bisabolol by metabolic engineering. By introducing the heterologous gene MrBBS and weakening the competitive pathway gene ERG9, a de novo (–)-α-bisabolol biosynthesis strain was constructed that could produce 221.96 mg/L (–)-α-bisabolol. Two key genes for (–)-α-bisabolol biosynthesis, ERG20 and MrBBS, were fused by a flexible linker (GGGS)3 under the GAL7 promoter control, and the titer was increased by 2.9-fold. Optimization of the mevalonic acid pathway and multi-copy integration further increased (–)-α-bisabolol production. To promote product efflux, overexpression of PDR15 led to an increase in extracellular production. Combined with the optimal strategy, (–)-α-bisabolol production in a 5 L bioreactor reached 7.02 g/L, which is the highest titer reported in yeast to date. This work provides a reference for the efficient production of (–)-α-bisabolol in yeast.

Abstract Deep learning (DL) approaches have the ability to accurately recognize promoter regions and predict their strength. Here, the potential for controllably designing active Escherichia coli promoter is explored by combining multiple deep learning models. First, “DRSAdesign,” which relies on a diffusion model to generate different types of novel promoters is created, followed by predicting whether they are real or fake and strength. Experimental validation showed that 45 out of 50 generated promoters are active with high diversity, but most promoters have relatively low activity. Next, “Ndesign,” which relies on generating random sequences carrying functional −35 and −10 motifs of the sigma70 promoter is introduced, and their strength is predicted using the designed DL model. The DL model is trained and validated using 200 and 50 generated promoters, and displays Pearson correlation coefficients of 0.49 and 0.43, respectively. Taking advantage of the DL models developed in this work, possible 6‐mers are predicted as key functional motifs of the sigma70 promoter, suggesting that promoter recognition and strength prediction mainly rely on the accommodation of functional motifs. This work provides DL tools to design promoters and assess their functions, paving the way for DL‐assisted metabolic engineering.

AbstractPurpose To assess the utility of Sonazoid contrast-enhanced ultrasound (CEUS) for guiding percutaneous microwave ablation (MWA) for colorectal liver metastases (CRLMs).Materials and Methods The medical records of patients who had undergone ultrasound (US)-guided percutaneous MWA between July 2020 and June 2022, were reviewed. Propensity score matching (PSM) with a ratio of 1:1 was used to balance the potential bias between the grayscale US-guided and Sonazoid CEUS-guided groups. Local tumor progression (LTP), intrahepatic recurrence (IR), and complication rates were compared between the two groups.Results Of 252 patients enrolled, 247 achieved complete ablation, and the technical effectiveness was 98.0% (247/252). Of these 247 patients, 158 were in the grayscale US-guided group and 89 in the Sonazoid CEUS-guided group. The median follow-up period was 14.6 months. After PSM, there were no significant differences in LTP, IR, or complication rates between the two groups (p = 0.100, p = 0.511, p > 0.99, respectively). Multivariate analysis identified tumor size ≥ 3 cm (hazard ratio [HR], 7.945; 95% CI, 2.591-24.370; p 8 cm (HR, 3.194; 95% CI, 1.439-7.091; p = 0.004) as significant factors associated with LTP. For tumors with poor vision on grayscale US, Sonazoid CEUS-guided ablation achieved a better LTP rate than grayscale US-guided ablation (3.7% vs.14.8%, p = 0.032).Conclusion For tumors with poor vision on grayscale US, Sonazoid CEUS guidance is recommended for better local tumor control.

Abstract Background Retinoblastoma (RB) is frequently occurring malignant tumors that originate in the retina, and their exact cause and development mechanisms are yet to be fully comprehended. In this study, we identified possible biomarkers for RB and delved into the molecular mechanics linked with such markers. Methods In this study GSE110811 and GSE24673 were analyzed. Weighted gene co-expression network analysis (WGCNA) was applied to screen modules and genes associated with RB. By overlapping RB-related module genes with differentially expressed genes (DEGs) between RB and control samples, differentially expressed retinoblastoma genes (DERBGs) were acquired. A gene ontology (GO) enrichment analysis and a kyoto encyclopedia of genes and genomes (KEGG) enrichment analysis were conducted to explore the functions of these DERBGs. To study the protein interactions of DERBGs, a protein–protein interaction (PPI) network was constructed. Hub DERBGs were screened using the least absolute shrinkage and selection operator (LASSO) regression analysis, as well as the random forest (RF) algorithm. Additionally, the diagnostic performance of RF and LASSO methods was evaluated using receiver operating characteristic (ROC) curves and single-gene gene set enrichment analysis (GSEA) was conducted to explore the potential molecular mechanisms involved with these Hub DERBGs. In addition, the competing endogenous RNA (ceRNA) regulatory network of Hub DERBGs was constructed. Result About 133 DERBGs were found to be associated with RB. GO and KEGG enrichment analyses revealed that the important pathways of these DERBGs. Furthermore, the PPI network revealed 82 DERBGs interacting with each other. By RF and LASSO methods, PDE8B, ESRRB, and SPRY2 were identified as Hub DERBGs in patients with RB. From the expression assessment of Hub DERBGs, it was found that the levels of expression of PDE8B, ESRRB, and SPRY2 were significantly decreased in the tissues of RB tumors. Secondly, single-gene GSEA revealed a connection between these 3 Hub DERBGs and oocyte meiosis, cell cycle, and spliceosome. Finally, the ceRNA regulatory network revealed that hsa-miR-342-3p, hsa-miR-146b-5p, hsa-miR-665, and hsa-miR-188-5p may play a central role in the disease. Conclusion Hub DERBGs may provide new insight into RB diagnosis and treatment based on the understanding of disease pathogenesis.

Lactase is a member of the β-galactosidase family of enzymes that can hydrolyze lactose into galactose and glucose. However, extracellular lactase production was still restricted to the process of cell lysis. In this study, lactase-producing Kluyveromyces lactis JNXR-2101 was obtained using a rapid and sensitive method based on the fluorescent substrate 4-methylumbelliferyl-β-d-galactopyranoside. The purified enzyme was identified as a neutral lactase with an optimum pH of 9. To facilitate extracellular production of lactase, a putative mannoprotein KLLA0_E01057g of K. lactis was knocked out. It could effectively promote cell wall degradation and lactase production after lyticase treatment, which showed potential on other extracellular enzyme preparation. After optimizing the fermentation conditions, the lactase yield from mannoprotein-deficient K. lactis JNXR-2101ΔE01057g reached 159.62 U/mL in a 5-L fed-batch bioreactor.

Mammalian hemoglobins (HB) are a kind of heme-binding proteins that play crucial physiological roles in various organisms. The traditional techniques employed for the extraction of HB are expensive and time-consuming, while the yields of mammalian HB in previous reports were quite low. The industrial Pichia pastoris is a highly effective platform for the secretory expression of heterologous proteins. To achieve efficient secretory expression of HB in P. pastoris, multiple strategies were applied, including the selection of a suitable host, the screening of optimal endogenous signal peptides, the knockout of VPS10, VTH1, and PEP5, and the co-expression of Alpha-Hemoglobin Stabilizing Protein (AHSP). In addition, the conditions for producing HB were optimized at shaking-flask level (BMMY medium with 100 mg/L of hemin, 2% methanol, and 24 °C). Based on these conditions, the higher titers of bovine hemoglobin (bHB, 376.9 ± 13.3 mg/L), porcine hemoglobin (pHB, 119.2 ± 7.3 mg/L), and human hemoglobin (hHB, 101.1 ± 6.7 mg/L) were achieved at fermenter level. The engineered P. pastoris strain and comprehensive strategies can also be applied to facilitate the synthesis of other high-value-added hemoproteins or hemoenzymes.

Phycocyanobilin (PCB) is a natural blue tetrapyrrole chromophore that is found in phycocyanin and plays an essential role in photosynthesis. Due to PCB’s antioxidation, anti-inflammatory and anti-cancer properties, it has been utilized in the food, pharmaceutical and cosmetic industries. Currently, the extraction of PCB from Spirulina involves complex processes, which has led to increasing interest in the biosynthesis of PCB in Escherichia coli. However, the PCB titer remains low because of the poor activity of key enzymes and the insufficient precursor supply. Here, the synthesis of PCB was firstly improved by screening the optimal heme oxygenase (HO) from Thermosynechococcus elongatus BP-1(HOT) and PCB: ferredoxin oxidoreductase from Synechocystis sp. PCC6803 (PcyAS). In addition, based on a rational design and the infrared fluorescence method for high-throughput screening, the mutants of HOT(F29W/K166D) and PcyAS(D220G/H74M) with significantly higher activities were obtained. Furthermore, a DNA scaffold was applied in the assembly of HOT and PcyAS mutants to reduce the spatial barriers, and the heme supply was enhanced via the moderate overexpression of hemB and hemH, resulting in the highest PCB titer (184.20 mg/L) obtained in a 5 L fermenter. The strategies applied in this study lay the foundation for the industrial production of PCB and its heme derivatives.

Leghemoglobin (LegH) is a plant-derived hemoglobin that can be used as a food additive to confer red color and meat flavor to plant-based meat products. Although LegH has been expressed in Saccharomyces cerevisiae, the productivity is low at the shaking-flask level, and the downstream process of purification is complicated. Herein, the intracellular expression of LegH reached 151.2 mg/L through initial promoter modification. Then, the fermentation strategy was optimized, and the titer of LegH reached 544.8 mg/L (5.2 mg/L/OD600 per unit yield) in the two-stage fed-batch fermentation in a 5-L fermenter. After the modification of signal peptide and knockout of proteases, the secretory expression of LegH was achieved in recombinant S. cerevisiae, and the final secretory titer of LegH reached 88.5 mg/L at the 5-L fermenter level. Based on the results of this study, the secreted LegH can be widely applied in the fields of food processing and biocatalysis in the future.

Abstract Microbial synthesis of valuable hemoproteins has become a popular research topic, and Pichia pastoris is a versatile platform for the industrial production of recombinant proteins. However, the inadequate supply of heme limits the synthesis of high‐active hemoproteins. Here a strategy for enhancing intracellular heme biosynthesis to improve the titers and functional activities of hemoproteins is reported. After selecting a suitable expressional strategy for globins, the efficient heme‐supply P. pastoris chassis is established by removing the spatial segregation during heme biosynthesis, optimizing precursor synthesis, assembling rate‐limiting enzymes using protein scaffolds, and inhibiting heme degradation. This robust chassis produces several highly active hemoproteins, including porcine myoglobin, soy hemoglobin, Vitreoscilla hemoglobin, and P450‐BM3, which can be used in the development of artificial meat, high‐cell‐density fermentation, and whole‐cell catalytic synthesis of high‐value‐added compounds. Furthermore, the engineered chassis strain has great potential for producing and applying other hemoproteins with high activities in various fields.

Abstract L‐Sorbosone dehydrogenase (SNDH) is a key enzyme involved in the biosynthesis of 2‐keto‐L‐gulonic acid , which is a direct precursor for the industrial scale production of vitamin C. Elucidating the structure and the catalytic mechanism is essential for improving SNDH performance. By solving the crystal structures of SNDH from Gluconobacter oxydans WSH‐004, a reversible disulfide bond between Cys295 and the catalytic Cys296 residues is discovered. It allowed SNDH to switch between oxidation and reduction states, resulting in opening or closing the substrate pocket. Moreover, the Cys296 is found to affect the NADP+ binding pose with SNDH. Combining the in vitro biochemical and site‐directed mutagenesis studies, the redox‐based dynamic regulation and the catalytic mechanisms of SNDH are proposed. Moreover, the mutants with enhanced activity are obtained by extending substrate channels. This study not only elucidates the physiological control mechanism of the dehydrogenase, but also provides a theoretical basis for engineering similar enzymes.

Given the unique characteristic of integrating CO2 conversion and renewable energy storage, metal–CO2 batteries (MCBs) are expected to become the next‐generation technology to address both environmental and energy crises. As involving complex gas–liquid–solid three‐phase interfacial reactions, cathodes of MCBs can significantly affect the overall battery operation, thus attracting much research attention. Compared to conventional materials, 2D materials offer great opportunities for the design and preparation of high‐performance catalyst cathodes, especially showing superior bifunctional electrocatalytic capacity for rechargeable MCBs. The inherent high‐specific‐surface area and diverse structural architectures of 2D materials enable their flexible and rational engineering designs toward kinetically favorable metal–CO2 electrochemistry. Herein this review, the cutting‐edge progresses of 2D materials‐based catalyst cathodes are presented in MCBs. The reaction mechanisms of various MCBs, including both nonaqueous and aqueous systems, are systematically introduced. Then, the design criteria of catalyst cathodes, and the merits and demerits of 2D materials‐based catalyst cathodes are discussed. After that, three representative engineering strategies (i.e., defect control, phase engineering, and heterostructure design) of 2D materials for high‐performance MCBs are systematically described. Finally, the current research advances are briefly summarized and the confronting challenges and opportunities for future development of advanced MCB cathodes are proposed.

Objective: To study the effect of chitosan oligosaccharide with a molecular weight ≤3000 Da (COSM) on the energy metabolism of obese mice after faecal bacteria transplantation. Methods: A pseudo-germ-free obese mouse model was established. 16S rRNA was used to analyse the microflora of the caecal contents of mice in each group to judge whether the model was successful or not. The faecal flora of donor mice was transplanted into a pseudo-germ-free obese mouse model by tube feeding, and the lipid-lowering effect of COSM intervention on the intestinal flora was detected. The correlations among the bile acid composition, key intestinal microbial markers, and serum bile acid spectrum were analysed. At the same time, the influence of intestinal microorganisms on the TGR5-Dio2-UCP1 signalling pathway after faecal bacteria transplantation was explored. Conclusion: COSM can regulate the intestinal microecology and serum bile acid pool of pseudo-germ-free obese mice through intestinal microorganisms, thus activating the energy metabolism pathway to play a role in weight loss.

As a potential substitute for fatty acids, common low-cost oils could be used to produce acetyl-CoA derivatives, which meet the needs of low-cost industrial production. However, oils are hydrophobic macromolecules and cannot be directly transported into cells. In this study, caveolin was expressed in Saccharomyces cerevisiae to absorb exogenous oils. The expression of caveolin fused with green fluorescent protein showed that caveolin mediated the formation of microvesicles in S. cerevisiae and the addition of 5,6-carboxyfluorescein showed that caveolae had the ability to transport exogenous substances into cells. The intracellular and extracellular triacylglycerol levels were then detected after the addition of soybean oil pre-stained with Nile Red, which proved that caveolae had the ability to absorb the exogenous oils. Lastly, caveolin for oils absorption and lipase from Bacillus pumilus for oil hydrolysis were co-expressed in the naringenin-producing Saccharomyces cerevisiae strain, resulting in naringenin production increasing from 222 mg/g DCW (dry cell weight) (231 mg/L) to 269 mg/g DCW (241 mg/L). These results suggested that the caveolin-mediated transporter independent oil transport system would provide a promising strategy for the transport of hydrophobic substrates.

(2S)-Sakuranetin is a 7-O-methylflavonoid that has anticancer, antiviral, and antimicrobial activities. Methylation process is involved in biosynthesizing (2S)-sakuranetin from (2S)-naringenin, in which S-adenosylmethionine (SAM) serves as the methyl donor. In this study, after methyl donor and substrate inhibition were identified as limiting factors for (2S)-sakuranetin biosynthesis, an efficient (2S)-sakuranetin-producing strain was constructed by enhancing methyl donor supply and cell tolerance to (2S)-naringenin. Firstly, PfOMT3 from Perilla frutescens was selected as the optimal flavonoid 7-O-methyltransferase (F7-OMT) for the conversion of (2S)-naringenin to (2S)-sakuranetin. Then, the methylation process was upregulated by regulating pyridoxal 5′-phosphate (PLP) content, key enzymes in methionine synthesis pathway, and the availability of ATP. Furthermore, genes that can enhance cell resistance to (2S)-naringenin were identified from molecular chaperones and sRNAs. Finally, by optimizing the fermentation process, 681.44 mg/L of (2S)-sakuranetin was obtained in 250-mL shake flasks. The titer of (2S)-sakuranetin reached 2642.38 mg/L in a 5-L bioreactor, which is the highest titer ever reported. This work demonstrates the importance of cofactor PLP in methylation process, and provides insights to biosynthesize other O-methylated flavonoids efficiently in E. coli.

Abstract 1,3-Dihydroxyacetone (DHA) is a commercially important chemical and widely used in cosmetics, pharmaceuticals, and food industries as it prevents excessive water evaporation, and provides anti-ultraviolet radiation protection and antioxidant activity. Currently, the industrial production of DHA is based on a biotechnological synthetic route using Gluconobacter oxydans. However, achieving higher production requires more improvements in the synthetic process. In this study, we compared DHA synthesis levels in five industrial wild-type Gluconobacter strains, after which the G. oxydans WSH-003 strain was selected. Then, 16 dehydrogenase genes, unrelated to DHA synthesis, were individually knocked out, with one strain significantly enhancing DHA production, reaching 89.49 g L−1 and 42.27% higher than the wild-type strain. By optimizing the culture media, including seed culture and fermentation media, DHA production was further enhanced. Finally, using an established fed-batch fermentation system, DHA production reached 198.81 g L−1 in a 5 L bioreactor, with a glycerol conversion rate of 82.84%. Graphical Abstract

Abstract Collagen is a biofunctional protein that has been widely used in many fields, including but not limited to biomedical, cosmetics and skin care, food, and novel materials. Recombinant collagen has great potential as an alternative to collagen extracted from animals because it avoids the immune response, and the yield and properties are stable. However, challenges remain in the industrial application of recombinant collagen, including improving the expression yield, reducing the cost of purification for industry and expanding applications. In this study, a cloning and recombination method was used to heterologously express the recombinant human-like collagen (RHLC) in Pichia pastoris GS115 using the pPIC9k expression vector. The RHLC expression titre was 2.33 g/L via a 5-L fermenter, and the purification was completed within 48 h and was 98% pure. The characteristics of RHLC were investigated. Furthermore, potential applications for RHLC were explored, such as basal collagen sponge preparation, forming films with chitosan and production of collagen hydrolysed peptides. RHLC has various potential applications due to its triple helical structure, thermostability, good biocompatibility and film-forming ability. Graphical Abstract

Abstract Pyruvic acid is an important organic acid and a key industrial raw material. It is widely used in the chemical, agricultural, and food fields. Candida glabrata is the preferred strain for pyruvic acid production. The waste yeast cell for pyruvic acid fermentation with C. glabrata are rich in protein, amino acid, nucleic acid, and vitamins, as potential and cost-effective nitrogen source raw material. In this study, the potential of C. glabrata to produce pyruvic acid using spent yeast cell dry powder was evaluated. When 30 g/L of spray-dried spent yeast cell powder was used as the seed nitrogen source, a high titer of pyruvic acid was obtained. The pyruvic acid production reached 63.4 g/L with a yield of 0.59 g/g in a 5 L bioreactor. After scale-up to a 50 L bioreactor using the fermented spent yeast cell dry powder as a seed nitrogen source, 65.1 g/L of pyruvic acid was harvested, with a yield of 0.61 g/g. This study proposes a promising approach for increasing the pyruvic acid titer and reducing the costs. Graphical Abstract

Abstract Background Lipoxygenase (EC. 1.13.11.12, LOX) can catalyze the addition of oxygen into polyunsaturated fatty acids to produce hydroperoxides, which are widely used in the food, chemical, and pharmaceutical industries. In recent years, the heterologous production of LOX by Escherichia coli has attracted extensive attention. However, overexpressed recombinant LOX in E. coli aggregates and forms insoluble inclusion bodies owing to protein misfolding. Results In this study, a split green fluorescent protein-based screening method was developed to screen sigma (σ) factors and molecular chaperones for soluble LOX expression. Three mutant libraries of Skp, GroES, and RpoH was analyzed using the high-throughput screening method developed herein, and a series of mutants with significantly higher yield of soluble heterologous LOX were obtained. The soluble expression level of LOX in the isolated mutants increased by 4.2- to 5.3-fold. Further, the highest LOX activity (up to 6240 ± 269 U·g-DCW−1) was observed in E. coli REopt, with the regulatory factor mutants, RpoH and GroES. Based on RNA-Seq analysis of the selected strains, E. coli Eopt, E. coli Sopt, E. coli Ropt, and wild type, amino acid substitutions in σ factors and molecular chaperones regulated the expression level of genes related to gene replication, recombination, and repair. Furthermore, the regulatory factor mutants were identified to be beneficial to the soluble expression of two other heterologous proteins, amylase and bone morphological protein 12. Conclusion In this study, a high-throughput screening method was developed for improved soluble LOX expression. The obtained positive mutants of the regulatory factor were analyzed and employed for the expression of other heterologous proteins, thus providing a potential solution for the inclusion-body protein.

Abstract Background Dihydroquercetin (DHQ), a powerful bioflavonoid, has a number of health-promoting qualities and shows potential as a treatment for a number of disorders. Dihydroquercetin biosynthesis is a promising solution to meet the rising demand for dihydroquercetin. However, due to the significant accumulation of eriodietyol (ERI), naringenin (NAR), dihydrokaempferol (DHK), and other metabolites, the yield of DHQ biosynthesis is low. As a result, this is the hindrance to the biosynthesis of DHQ. Results In this study, we proposed several strategies to enhance the product formation and reduce the metabolites in accumulation. The flavonoid 3′-hydroxylase (F3′H) and cytochrome P450 reductase from different species were co-expressed in S. cerevisiae, and the best strain expressing the P450-reductase enzyme complex (SmF3′H/ScCPR) yielded 435.7 ± 7.6 mg/L of ERI from NAR in the deepwell microplate. The product conversion rate was improved further by mutating the predicted potential ubiquitination sites to improve SmF3′H stability, resulting in a 12.8% increase in titre using the mutant SmF3′H (K290R). Besides, different F3Hs from various sources and promoters were tested for the improved DHQ production, with the best strain producing 381.2 ± 10.7 mg/L of DHQ from 1 g/L of NAR, suggesting the temporal regulation the expression of F3H is important for maximization the function of F3′H and F3H. Conclusion This study offers effective strategies for improving DHQ production from NAR and could be used as a reference for related research.

Cobalamin is an essential human vitamin widely used in the pharmaceutical, food, and feed additive industries and currently produced by bacteria or archaea. Ensifer adhaerens HY-1 is an industrial strain that also produces cobalamin. However production outputs are poor and the specific synthesis pathways require characterization. In this study, the whole genome sequence of E. adhaerens HY-1 was generated and annotated, and genes associated with cobalamin biosynthesis were identified. Then, three genes, CobSV, CobQ, and CobW were identified as the most efficient ones for enhancing cobalamin synthesis. By transcriptome sequencing of E. adhaerens HY-1 cells at different growth stages, 65 endogenous promoters with different gradient strengths were identified. After combined expression of different strength promoters and key genes, a high cobalamin-producing recombinant strain, ‘hmm’ (genotype: PmetH-CobSV-PibpA-CobQ-Pmdh-CobW), was generated. Cobalamin production was 143.8 mg/L in shaking flasks, which was 41.0% higher than the original strain. Cobalamin production was further enhanced to 171.2 mg/L using fed-batch fermentation. Importantly, our data and novel approach provide important references for the analysis of cobalamin synthesis and other metabolites in complex metabolic pathways.

Background and aimSepsis is a syndromic response to infection and is associated with high mortality, thus imposing a significant global burden of disease. Although low-molecular-weight heparin (LMWH) has been recommended to prevent venous thromboembolism, its anticoagulant and anti-inflammatory effects in sepsis remain controversial. Owing to the modification of the Sepsis-3 definition and diagnostic criteria, further evaluation of the efficacy and benefit population of LMWH is required.MethodsWe performed a retrospective cohort study to assess whether LMWH improved the inflammation, coagulopathy, and clinical outcomes against Sepsis-3 and to identify the target patients. All patients diagnosed with sepsis at the First Affiliated Hospital of Xi'an Jiaotong University (the largest general hospital in northwest China) from January 2016 to December 2020 were recruited and re-evaluated using Sepsis-3 criteria.ResultsAfter 1:1 propensity score matching, 88 pairs of patients were categorized into the treatment and control groups based on subcutaneous LMWH administration. Compared with the control group, a significantly lower 28-day mortality was observed in the LMWH group (26.1 vs. 42.0%, p = 0.026) with a comparable incidence of major bleeding events (6.8 vs. 8.0%, p = 0.773). Cox regression analysis showed that LMWH administration was the independent protective factor for septic patients (aHR, 0.48; 95% CI, 0.29–0.81; p = 0.006). Correspondingly, the LMWH treatment group showed a significant improvement in inflammation and coagulopathy. Further subgroup analysis showed that LMWH therapy was associated with favorable outcomes in patients younger than 60 years and diagnosed with sepsis-induced coagulopathy (SIC), ISTH overt DIC, non-septic shock, or non-diabetics and in patients included in the moderate-risk group (APACHE II score 20–35 or SOFA score 8–12).ConclusionOur study results showed that LMWH improves 28-day mortality by improving inflammatory response and coagulopathy in patients meeting Sepsis-3 criteria. The SIC and ISTH overt DIC scoring systems can better identify septic patients who are likely to benefit more from LMWH administration.

SYP71, a plant-specific Qc-SNARE with multiple subcellular localization, is essential for symbiotic nitrogen fixation in nodules in Lotus, and is implicated in plant resistance to pathogenesis in rice, wheat and soybean. Arabidopsis SYP71 is proposed to participate in multiple membrane fusion steps during secretion. To date, the molecular mechanism underlying SYP71 regulation on plant development remains elusive. In this study, we clarified that AtSYP71 is essential for plant development and stress response, using techniques of cell biology, molecular biology, biochemistry, genetics, and transcriptomics. AtSYP71-knockout mutant atsyp71-1 was lethal at early development stage due to the failure of root elongation and albinism of the leaves. AtSYP71-knockdown mutants, atsyp71-2 and atsyp71-3, had short roots, delayed early development, and altered stress response. The cell wall structure and components changed significantly in atsyp71-2 due to disrupted cell wall biosynthesis and dynamics. Reactive oxygen species homeostasis and pH homeostasis were also collapsed in atsyp71-2. All these defects were likely resulted from blocked secretion pathway in the mutants. Strikingly, change of pH value significantly affected ROS homeostasis in atsyp71-2, suggesting interconnection between ROS and pH homeostasis. Furthermore, we identified AtSYP71 partners and propose that AtSYP71 forms distinct SNARE complexes to mediate multiple membrane fusion steps in secretory pathway. Our findings suggest that AtSYP71 plays an essential role in plant development and stress response via regulating pH homeostasis through secretory pathway.

l-Sorbose is an essential intermediate for the industrial production of vitamin C (l-ascorbic acid). However, the formation of fructose and some unknown by-products significantly reduces the conversion ratio of D-sorbitol to l-sorbose. This study aimed to identify the key D-sorbitol dehydrogenases in Gluconobacter oxydans WSH-003 by gene knockout. Then, a total of 38 dehydrogenases were knocked out in G. oxydans WSH-003, and 23 dehydrogenase-deficient strains could increase l-sorbose production. G. oxydans-30, wherein a pyrroloquinoline quinone-dependent glucose dehydrogenase was deleted, showed a significant reduction of a by-product with the extension of fermentation time. In addition, the highest conversion ratio of 99.60% was achieved in G. oxydans MD-16, in which 16 different types of dehydrogenases were inactivated consecutively. Finally, the gene vhb encoding hemoglobin was introduced into the strain. The titer of l-sorbose was 298.61 g/L in a 5-L bioreactor. The results showed that the systematic engineering of dehydrogenase could significantly enhance the production of l-sorbose.

Quinoa grains are gaining increasing popularity owing to their high nutritional merits. However, only limited information is available on the metabolic profiles of quinoa grains. In this study, we determined the metabolic profiles of black, red, and white quinoa grains via an ultraperformance liquid chromatography–electrospray ionization–tandem mass spectrometry (UPLC–ESI–MS/MS)-based metabolomics. A total of 689 metabolites were identified, among which 251, 182, and 317 metabolites displayed different accumulation patterns in the three comparison groups (Black vs Red, Black vs White, and Red vs White), respectively. In particular, flavonoid and phenolic acid contents displayed considerable differences, with 22 flavonoids, 5 phenolic acids, and 1 betacyanin being differentially accumulated among the three quinoa cultivars. Additionally, correlation analysis showed that flavonoids and phenolic acids could act as betanin co-pigments in quinoa grains. In conclusion, this study provides comprehensive insights into the adequate utilization and development of novel quinoa-based functional foods.

Abstract Quercetin is an essential ingredient in functional foods and nutritional supplements, as well as a promising therapeutic reagent. Also, the green technique to produce quercetin via rutin biotransformation is attractive. Genes encoding two thermostable glycosidases from Dictyoglomus thermophilum were cloned and expressed in Escherichia coli, which were applied in rutin biotransformation to produce highly pure quercetin at a high temperature. The production of biocatalysts were scaled up in a 5-L bioreactor, yielding a several-fold increase in total enzyme activity and a quercetin production of 14.22 ± 0.26 g/L from 30 g/L of rutin. Feeding strategies were optimized to boost biomass and enzyme production, achieving an activity of 104,801.80 ± 161.99 U/L for rhamnosidase and 12,637.23 ± 17.94 U/L for glucosidase, and a quercetin yield of 20.24 ± 0.27 g/L from the complete conversion of rutin. This study proposes a promising approach for producing high-quality quercetin in an industrial setting. Graphical Abstract

Abstract Background Streptomyces mobaraenesis transglutaminase (smTG) is widely used to generate protein crosslinking or attachment of small molecules. However, the low thermostability is a main obstacle for smTG application. In addition, it is still hard to achieve the secretory expression of active smTG in E. coli, which benefits the enzyme evolution. In this study, a combined strategy was conducted to improve the thermostability and secretory expression of active smTG in E. coli. Results First, the thermostable S. mobaraenesis transglutaminase variant S2P-S23V-Y24N-S199A-K294L (TGm1) was intracellularly expressed in pro-enzyme form in E. coli. Fusing the pro-region of Streptomyces hygroscopicus transglutaminase (proH) and TrxA achieved a 9.78 U/mL of intracellular smTG activity, 1.37-fold higher than the TGm1 fused with its native pro-region. After in vitro activation by dispase, the TGm1 with proH yielded FRAPD-TGm1, exhibiting 0.95 ℃ and 94.25% increases in melting temperature and half-life at 60 ℃ compared to FRAP-TGm1 derived from the expression using its native pro-region, respectively. Second, the TGm1 with proH was co-expressed with transglutaminase activating protease and chaperones (DnaK, DnaJ, and GrpE) in E. coli, achieving 9.51 U/mL of intracellular FRAPD-TGm1 without in vitro activation. Third, the pelB signal peptide was used to mediate the secretory expression of active TGm in E. coli, yielding 0.54 U/mL of the extracellular FRAPD-TGm1. A script was developed to shuffle the codon of pelB and calculate the corresponding mRNA folding energy. A 1.8-fold increase in the extracellular expression of FRAPD-TGm1 was achieved by the Top-9 pelB sequence derived from the coding sequences with the lowest mRNA folding energy. Last, deleting the gene of Braun’s lipoprotein further increased the extracellular yield of FRAPD-TGm1 by 31.2%, reached 1.99 U/mL. Conclusions The stabilized FRAPD-smTG here could benefit the enzyme application in food and non-food sectors, while the E. coli system that enables secretory expression of active smTG will facilitate the directed evolution for further improved catalytic properties. The combined strategy (N-terminal modification, co-expression with chaperones, mRNA folding energy optimization of signal peptide, and lipoprotein deletion) may also improve the secretory expression of other functional proteins in E. coli.

Abstract Background Lipoxygenase (LOX) is a non-heme iron containing dioxygenase that is widely used to improve food quality and produce active drug intermediates and biodiesel. Escherichia coli is one of the most widely used host microorganisms for recombinant protein expression; however, its weak extracellular secretion ability precludes its effective production of recombinant proteins into the extracellular environment. To facilitate subsequent characterization and application of LOX, improving its secretion efficiency from E. coli is a major challenge that needs to be solved. Results Several strategies were adopted to improve the extracellular secretion of LOX based on the signal peptides and cell wall permeability of E. coli. Here, we studied the effect of signal peptides on LOX secretion, which increased the secretory capacity for LOX marginally. Although surfactants could increase the permeability of the cell membrane to promote LOX secretion, the extracellular LOX yield could not meet the requirements of industrialization production. Subsequently, an autolysis system was constructed in E. coli based on the bacteriophage lysis gene ΦX174-E to enhance the production of extracellular proteins. Thus, the extracellular production of LOX was achieved and the content of inclusion bodies in the cell was reduced by optimizing cell lysis conditions. The extracellular LOX yield reached 368 ± 1.4 U mL−1 in a 5-L bioreactor under optimized lysis conditions that is, an induction time and temperature, and arabinose concentration of 5 h, 25 °C, and 0.6 mM, respectively. Conclusions In this study, the different signal peptides and cell autolysis system were developed and characterized for extracellular LOX production in E. coli. Finally, the cell autolysis system presented a slight advantage on extracellular LOX yield, which also provides reference for other protein extracellular production.

Chinese rice wine (Huangjiu) has a long history and has been popular in China for thousands of years. During Huangjiu fermentation, many kinds of microorganisms are involved and hundreds of metabolites are produced, which form its unique aroma. The composition of the Huangjiu microbiome has a strong influence on the flavor and quality of the final consumer product. Therefore, this review summarizes the research progress on the main components, quality control indicators and flavor compounds, as well as potential hazards during the fermentation of Huangjiu. The influence of the dominant microbial species on the Huangjiu fermentation, the sensory qualities and the formation of harmful substances are discussed. This helps to provide a theoretical basis for modification of the Huangjiu microbiome to improve control of the fermentation process and the overall sensory quality of the final product.

Abstract By exploiting versatile P450 enzymes, whole‐cell biocatalysis can be performed to synthesize valuable compounds in Escherichia coli. However, the insufficient supply of heme limits the whole‐cell P450 biocatalytic activity. Here a strategy for improving intracellular heme biosynthesis to enhance the catalytic efficiencies of P450s is reported. After comparing the effects of improving heme transport and biosynthesis on P450 activities, intracellular heme biosynthesis is optimized through the integrated expression of necessary synthetic genes at proper ratios and the assembly of rate‐limiting enzymes using DNA‐guided scaffolds. The intracellular heme level is fine‐tuned by the combined use of mutated heme‐sensitive biosensors and small regulatory RNA systems. The catalytic efficiencies of three different P450s, BM3, sca‐2, and CYP105D7, are enhanced through fine‐tuning heme biosynthesis for the synthesis of hydroquinone, pravastatin, and 7,3′,4′‐trihydroxyisoflavone as example products of chemical intermediate, drug, and natural product, respectively. This strategy of fine‐tuned heme biosynthesis will be generally useful for developing whole‐cell biocatalysts involving hemoproteins.