Search

Abstract Bietti crystalline corneoretinal dystrophy is an inherited retinal disease caused by mutations in CYP4V2, which results in blindness in the working-age population, and there is currently no available treatment. Here, we report the results of the first-in-human clinical trial (NCT04722107) of gene therapy for Bietti crystalline corneoretinal dystrophy, including 12 participants who were followed up for 180–365 days. This open-label, single-arm exploratory trial aimed to assess the safety and efficacy of a recombinant adeno-associated-virus-serotype-2/8 vector encoding the human CYP4V2 protein (rAAV2/8-hCYP4V2). Participants received a single unilateral subretinal injection of 7.5 × 1010 vector genomes of rAAV2/8-hCYP4V2. Overall, 73 treatment-emergent adverse events were reported, with the majority (98.6%) being of mild or moderate intensity and considered to be procedure- or corticosteroid-related; no treatment-related serious adverse events or local/systemic immune toxicities were observed. Compared with that measured at baseline, 77.8% of the treated eyes showed improvement in best-corrected visual acuity (BCVA) on day 180, with a mean ± standard deviation increase of 9.0 ± 10.8 letters in the 9 eyes analyzed (p = 0.021). By day 365, 80% of the treated eyes showed an increase in BCVA, with a mean increase of 11.0 ± 10.6 letters in the 5 eyes assessed (p = 0.125). Importantly, the patients’ improvement observed using multifocal electroretinogram, microperimetry, and Visual Function Questionnaire-25 further supported the beneficial effects of the treatment. We conclude that the favorable safety profile and visual improvements identified in this trial encourage the continued development of rAAV2/8-hCYP4V2 (named ZVS101e).

Providing self-powered energy for wearable electronic devices is currently an important research direction in the field of thermoelectric (TE) thin films. In this study, a simple dual-source magnetron sputtering method was used to prepare Ag2Te thin films, which exhibit good TE properties at room temperature, and the growth temperature and subsequent annealing process were optimized to obtain high-quality films. The experimental results show that films grown at a substrate temperature of 280 °C exhibit a high power factor (PF) of ~3.95 μW/cm·K2 at room temperature, which is further improved to 4.79 μW/cm·K2 after optimal annealing treatment, and a highest PF of ~7.85 μW/cm·K2 was observed at 200 °C. Appropriate annealing temperature effectively increases the carrier mobility of the Ag2Te films and adjusts the Ag/Te ratio to make the composition closer to the stoichiometric ratio, thus promoting the enhancement of electrical transport properties. A TE device with five legs was assembled using as-fabricated Ag2Te thin films. With a temperature difference of 40 K, the device was able to generate an output voltage of approximately 14.43 mV and a corresponding power of about 50.52 nW. This work not only prepared a high-performance Ag2Te film but also demonstrated its application prospects in the field of self-powered electronic devices.

Cu2Se is an attractive thermoelectric material due to its layered structure, low cost, environmental compatibility, and non-toxicity. These traits make it a promising replacement for conventional thermoelectric materials in large-scale applications. This study focuses on preparing Cu2Se flexible thin films through in situ magnetron sputtering technology while carefully optimizing key preparation parameters, and explores the physical mechanism of thermoelectric property enhancement, especially the power factor. The films are deposited onto flexible polyimide substrates. Experimental findings demonstrate that films grown at a base temperature of 200 °C exhibit favorable performance. Furthermore, annealing heat treatment effectively regulates the Cu element content in the film samples, which reduces carrier concentration and enhances the Seebeck coefficient, ultimately improving the power factor of the materials. Compared to the unannealed samples, the sample annealed at 300 °C exhibited a significant increase in room temperature Seebeck coefficient, rising from 9.13 μVK−1 to 26.73 μVK−1. Concurrently, the power factor improved from 0.33 μWcm−1K−2 to 1.43 μWcm−1K−2.

Abstract Background Uveal melanoma (UM) is the most common intraocular malignancy in adults, with a poor survival prognosis. To date, limited understanding of UM’s molecular mechanisms constitutes an obstacle to developing effective therapy. In this study, we examined key regulators mediating UM progression and their clinical relevance. Methods Transcriptomics of UM patients and cells were analyzed via RNA sequencing and bioinformatic analysis. Zinc finger protein 704 (ZNF704) was identified as prognosis-related biomarker for UM based on clinical characteristics and RNA-seq data from The Cancer Genome Atlas (TCGA). Gene expression was knocked down by specific shRNAs/siRNAs and overexpressed by transfection with plasmids inserted with investigated gene cDNA. Cell proliferation, viability and invasion abilities were determined by CCK8, colony formation and transwell assays, respectively. For cell cycle and apoptosis, cells were PI or PI/Annexin V-APC stained and analyzed by flow cytometry. Standard immunoblotting and quantitative RT-PCR were employed to assess the mRNA and protein abundance. To determine tumor growth in vivo, 4-week-old BALB/c-nu immune-deficient nude mice were inoculated with tumor cells. Results Analysis of differential expressed genes (DEGs) and survival analysis identified ZNF704 as a novel biomarker of UM. Prognostic analysis indicated ZNF704 as an independent predictor of UM overall survival. Expression of ZNF704 is elevated in UM tissues relative to adjacent normal choroid tissues. Knockdown of ZNF704 suppressed the growth and migration of UM cells and vice versa. In addition, expression of ZNF704 arrest UM cells at G0/G1 phase and inhibit cell apoptosis. RNA sequencing analysis indicated that SORBS3 were dysregulated after ZNF704 downregulation. Gene Set Enrichment Analysis (GSEA) revealed that upon ZNF704 knowndown, genes related with PI3K/AKT/mTOR, EMT and metastasis are enriched. Mechanistically, ZNF704 activates AKT/mTOR/glycolysis signaling pathway in UM cells. Moreover, expression of SORBS3 is downregulated by ZNF704 and knockdown of SORBS3 restored tumor cell viability in ZNF704 silenced cells. Conclusions ZNF704 predicts poor prognosis of UM and exhibit pro-oncogenic effect in UM progression in vivo and in vitro, mediated through AKT/mTOR signaling pathway and suppression of SORBS3 expression.

The EAST ICRF system operating space has been extended in power and phase control with a low-level RF system for the new double-strap antenna. Then the multi-step power and periodic phase scanning experiment were conducted in L-mode plasma, respectively. In the power scanning experiment, the stored energy, radiation power, plasma impedance and the antenna's temperature all have positive responses during the short ramp-ups of PL,ICRF. The core ion temperature increased from 1 keV to 1.5 keV and the core heating area expanded from |Z|≤5cm to |Z|≤10cm during the injection of ICRF waves. In the phasing scanning experiment, in addition to the same conclusions as the previous relatively phasing scanning experiment, the superposition effect of the fluctuation of stored energy, radiation power and neutron yield caused by phasing change with dual antenna, resulting in the amplitude and phase shift, was also observed. The active control of RF output facilitates the precise control of plasma profiles and greatly benefits future experimental exploration.

Abstract Flexible human–machine interfaces show broad prospects for next-generation flexible or wearable electronics compared with their currently available bulky and rigid counterparts. However, compared to their rigid counterparts, most reported flexible devices (e.g., flexible loudspeakers and microphones) show inferior performance, mainly due to the nature of their flexibility. Therefore, it is of great significance to improve their performance by developing and optimizing new materials, structures and design methodologies. In this paper, a flexible acoustic platform based on a zinc oxide (ZnO) thin film on an aluminum foil substrate is developed and optimized; this platform can be applied as a loudspeaker, a microphone, or an ambient sensor depending on the selection of its excitation frequencies. When used as a speaker, the proposed structure shows a high sound pressure level (SPL) of ~90 dB (with a standard deviation of ~3.6 dB), a low total harmonic distortion of ~1.41%, and a uniform directivity (with a standard deviation of ~4 dB). Its normalized SPL is higher than those of similar devices reported in the recent literature. When used as a microphone, the proposed device shows a precision of 98% for speech recognition, and the measured audio signals show a strong similarity to the original audio signals, demonstrating its equivalent performance compared to a rigid commercial microphone. As a flexible sensor, this device shows a high temperature coefficient of frequency of −289 ppm/K and good performance for respiratory monitoring.

Background: Thalassemia comprises a diverse group of genetic disorders that affects the synthesis of globin chains, with a global distribution. The use of erythrocyte lifespan (ELS) to assess differences among patients with different types of thalassemia and the efficacy of splenectomy has not been implemented.

Background: Microbiomes have been identified in various tumor types and could affect tumor progression and treatment. As the most prevalent primary malignant eye tumor in adults, uveal melanoma (UM) has not been explored regarding its endogenous microbiome. Plaque radiotherapy (PRT) is the gold standard for the treatment of UM. Hereby, we recruited 71 UM patients, sequenced the 16S rRNA gene of their tumor tissues, and analyzed the association between UM microbiome and disease phenotypes. Results: Clear bacterial signals were observed in UM tissues using fluorescence in situ hybridization. 450 bacterial species passed strict decontamination against 58 environmental control samples in 16S rRNA gene analysis, and these species formed three distinct types by unsupervised clustering. The UM microbiome types were significantly associated with PRT. A biomarker analysis showed that Pseudomonas was significantly enriched in the radiation group (RG) compared to the non-radiation group (NRG). A kind of radiation-resistant bacteria had a significantly higher positive rate in tumor tissues that underwent radiotherapy. We found that the radio-resistant bacteria Deinococcus was associated with smaller and earlier tumor stages, while Pseudomonas and Stenotrophomonas were associated with later metastasis. Conclusion: An endogenous microbiome might exist in UM tissues and was associated with UM features and treatment. Whether the tumor-residing microbiome has a role in UM development and metastasis is worth further investigation.

The safe operation of most tokamaks, especially the large ones, relies on the feedback control of vertical displacement events (VDEs). However, most of these feedback control systems are based on axisymmetric VDE models. In this study, we use NIMROD simulations to study the role of non-axisymmetric perturbations in free drift vertical displacement events on EAST. The high- n modes in the non-axisymmetric VDE grow first, which drives the formation of high- n magnetic island chains. Subsequently, the magnetic island chains grow and overlap with each other, leading to the destruction of the magnetic flux surface, which induces a minor disruption and accelerates the start of the following major disruption. The magnetic island and the stochastic magnetic field allow the toroidally non-axisymmetric poloidal plasma current to jet towards the hoop force direction, forming finger-like and filamentary structures. Such a plasma current non-axisymmetry strongly depends on the anisotropy in the thermal transport coefficients.

Highly sensitive surface acoustic wave (SAW) sensors have recently been recognized as a promising tool for various industrial and medical applications. However, existing SAW sensors generally suffer from a complex design, large size, and poor robustness. In this paper, we develop a simple and stable delay line ultra-high frequency (UHF) SAW sensor for highly sensitive detection of temperature. A Z-shaped delay line is specially designed on the piezoelectric substrate to improve the sensitivity and reduce the substrate size. Herein, the optimum design parameters of extremely short-pitch interdigital transducers (IDTs) are given by numerical simulations. The extremely short pitch gives the SAW sensor ultra-high operating frequency and consequently ultra-high sensitivity. Several experiments are conducted to demonstrate that the sensitivity of the Z-shaped SAW delay line sensor can reach up to 116.685°/°C for temperature detection. The results show that the sensor is an attractive alternative to current SAW sensing platforms in many applications.

The drive towards net-zero carbon emissions has prompted many industries to alter the way they operate. The agriculture industry is responsible for a large proportion of the UK’s greenhouse gas emissions. Thus, the feasibility of implementing an anaerobic digestion (AD) system supplying biogas to a trigeneration system with energy storage for the provision of heating, cooling and power has been investigated in the context of a medium-scale arable farm. Two configurations – one supplied with wheat straw only, and the other supplied with wheat straw, barley straw and manure – were identified to meet the energy demands of the farm. Technical feasibility was investigated via simulations run in ECLIPSE, with the two configurations returning overall system efficiencies of 66.8% and 67.1%, respectively. Economic analyses indicated simple payback periods of 9.4 and 11 years, which fall within the expected 20-year lifetime of the project. Furthermore, the potential reduction in CO2 emissions for each scenario was determined to be 42,764 kg and 43,956 kg per year.

Due to the instability of the characteristics of materials, fabrication processes and user handling, newly designed and fabricated wireless passive surface acoustic wave (WP-SAW) sensor nodes have inconsistent sensing performance. Furthermore, ambient environmental interferences aggravate inconsistences under complex working conditions. In this paper, a multi-iteration enhanced two-point simple moving average (MI-2P-SMA) method is proposed for sensing error reduction of a WP-SAW reflective delay line water temperature and pressure sensor. This method is improved from the traditional 2P-SMA method for better performance on error reduction. The results show: the MI-2P-SMA method does not change the original characteristics of experimental data; it can reduce relative errors of the WP-SAW reflective delay line water temperature and pressure sensor and has better performance than a traditional 2P-SMA method; it reduces the number of data points and the extent of this reduction is dependent on iteration time.

The development of mobile communication sets higher demands on high frequency surface acoustic wave (SAW) devices. The layout of interdigital transducers (IDT) in SAW devices is in plane and the traditional methods of improving frequency for SAW devices are the increase of acoustic velocity and the reduction of wavelength. However, these methods have a limit due to the limited acoustic velocity and the photolithography limit. This work proposes a new way for the development of high frequency SAW devices by redesigning the layout of IDT in three dimensions (3D). The set of IDTs is split into two layers, i.e. the ground electrodes on one layer and the signal electrodes on the other layer. This 3D layout of IDTs dramatically narrows the horizontal gap between two adjacent electrodes, which can significantly increase the frequency. The frequency and the electromechanical coupling factor (K2) of the four structures of SAW devices with the 3D layout of IDTs were studied by the finite element method (FEM). The results show that the frequency can be doubled under the same critical resolution of lithography due to the shortening of wavelength, and the 3D layout of IDTs is available for SAW devices based on piezoelectric thin film or piezoelectric single crystal. This work develops a new alternative to increase the working frequency of SAW devices.

Magnetostrictive thin-film coated Surface Acoustic Wave (SAW) devices were promising for sensing magnetic field owing to their superior features as micro-size, fast response, and high sensitivity originated from the magnetostrictive effect. However, the magnetostriction nature in magnetostrictive thin-film causes significantly mechanical fatigue in service, deteriorating the sensor performances. In this work, the fatigue phenomenon in magnetostrictive coating was underlined by characterizing the prepared FeCo thin-film coated magnetic device cyclically. Obvious shedding was observed in FeCo coating after cyclic testing and the magnetic-sensitivity decreases significantly. One of the reasons is the weak adhesion of FeCo thin-film towards the substrate. As an available way allowing enhancement of adhesion, a Cr thin-film was employed as the transition-layer to weaken the mechanical fatigue. However, it accompanied by the issue of the reduced magnetostrictive coefficient and the obstruction in magnetostrain-tranfer to piezoelectric substrate. As a result, the slump in sensitivity was observed. To address such issues, a design of dotted-pattern with Cr transition layer was employed to build the SAW based magnetic-device. High magnetic-sensitivity and excellent long-term stability were achieved because of the release of coercive force in FeCo dots and enhancement of the FeCo adhesion to the substrate.

IntroductionUveal melanoma (UM) is the most common intraocular malignancy in adults. Plaque brachytherapy remains the dominant eyeball-conserving therapy for UM. Tumor regression in UM after plaque brachytherapy has been reported as a valuable prognostic factor. The present study aimed to develop an accurate machine-learning model to predict the 4-year risk of metastasis and death in UM based on ocular ultrasound data.Material and MethodsA total of 454 patients with UM were enrolled in this retrospective, single-center study. All patients were followed up for at least 4 years after plaque brachytherapy and underwent ophthalmologic evaluations before the therapy. B-scan ultrasonography was used to measure the basal diameters and thickness of tumors preoperatively and postoperatively. Random Forest (RF) algorithm was used to construct two prediction models: whether a patient will survive for more than 4 years and whether the tumor will develop metastasis within 4 years after treatment.ResultsOur predictive model achieved an area under the receiver operating characteristic curve (AUC) of 0.708 for predicting death using only a one-time follow-up record. Including the data from two additional follow-ups increased the AUC of the model to 0.883. We attained AUCs of 0.730 and 0.846 with data from one and three-time follow-up, respectively, for predicting metastasis. The model found that the amount of postoperative follow-up data significantly improved death and metastasis prediction accuracy. Furthermore, we divided tumor treatment response into four patterns. The D(decrease)/S(stable) patterns are associated with a significantly better prognosis than the I(increase)/O(other) patterns.ConclusionsThe present study developed an RF model to predict the risk of metastasis and death from UM within 4 years based on ultrasound follow-up records following plaque brachytherapy. We intend to further validate our model in prospective datasets, enabling us to implement timely and efficient treatments.

Nitrogen dioxide is one origin of air pollution from fossil fuels with the potential to cause great harm to human health in low concentrations. Therefore, low-cost, low-power-consumption sensors for low-concentration NO2 detection are essential. Herein, heterojunction by SnO2 quantum wires, a traditional metal oxide NO2 sensing material, and Ti3C2Tx MXene, a novel type of 2D layered material, was synthesized using a simple solvothermal method for enhancing gas-sensing performance and reducing operating temperature. The operating temperature was reduced to 80 °C, with a best performance of 27.8 and a fast response and recovery time (11 s and 23 s, respectively). The SnO2 and Ti3C2Tx MXene composite exhibits high speed and low detection limit due to the construction of the heterojunction with high conductive Ti3C2Tx MXene. The selectivity and stability of gas sensors are carried out. This could enable the realization of fast response, high-sensitivity, and selective NO2 sensing under low operating temperatures.

Previous studies have shown that light iris color is a predisposing factor for the development of uveal melanoma (UM) in a population of Caucasian ancestry. However, in all these studies, a remarkably low percentage of patients have brown eyes, so we applied deep learning methods to investigate the correlation between iris color and the prevalence of UM in the Chinese population. All anterior segment photos were automatically segmented with U-NET, and only the iris regions were retained. Then the iris was analyzed with machine learning methods (random forests and convolutional neural networks) to obtain the corresponding iris color spectra (classification probability). We obtained satisfactory segmentation results with high consistency with those from experts. The iris color spectrum is consistent with the raters’ view, but there is no significant correlation with UM incidence.

A highly sensitive and precise Love wave mode surface acoustic wave (SAW) immunosensor based on an ST-cut 90°X quartz substrate and an SiO2 wave-guiding layer was developed to detect cancer-related biomarkers of carcinoembryonic antigens (CEAs). A delay line structure of the SAW device with a resonant frequency of 196 MHz was designed/fabricated, and its surface was functionalized through CEA antibody immobilization. The CEA antibodies were bound with gold nanoparticles and CEA antibodies to form a sandwich structure, which significantly amplified the mass loading effect and enhanced the maximum responses by 30 times. The center frequency of the Love wave immunosensor showed a linear response as a function of the CEA concentration in the range of 0.2–5 ng/mL. It showed a limit of detection of 0.2 ng/mL, and its coefficient of determination was 0.983. The sensor also showed minimal interference from nonspecific adsorptions, thus demonstrating its promise for point-of-care applications for cancer biomarkers.

Abstract Structure shift of GaN nanowall network, nanocolumn, and compact film were successfully obtained on Si (111) by plasma-assisted molecular beam epitaxy (MBE). As is expected, growth of the GaN nanocolumns was observed in N-rich condition on bare Si, and the growth shifted to compact film when the Ga flux was improved. Interestingly, if an aluminum (Al) pre-deposition for 40 s was carried out prior to the GaN growth, GaN grows in the form of the nanowall network. Results show that the pre-deposited Al exits in the form of droplets with typical diameter and height of ~ 80 and ~ 6.7 nm, respectively. A growth model for the nanowall network is proposed and the growth mechanism is discussed. GaN grows in the area without Al droplets while the growth above Al droplets is hindered, resulting in the formation of continuous GaN nanowall network that removes the obstacles of nano-device fabrication.

We propose an ultrasensitive leaky surface acoustic wave (LSAW) immunosensor based on molybdenum disulfide @ cuprous oxide—gold (MoS2@Cu2O-Au) nanoparticles and subsequent gold staining for the detection of alpha-fetoprotein (AFP). MoS2@Cu2O-Au nanoparticles, with their large specific surface area and good biocompatibility, not only capture the secondary antibodies (Ab2) but also amplify the mass loading effect of the acoustic wave sensor in the detection of AFP. The immunosensor signals are further amplified upon injection of gold staining solution. The developed immunosensor achieved a low detection limit of 5.5 and 25.0 pg/mL with and without gold staining, respectively. The immunosensor demonstrated its efficiency for the quantitative detection of AFP in complex biological fluids, including human serum and saliva samples, with excellent selectivity and long-term stability, showing great potential for the quantification of AFP in clinical diagnosis.

Organic phase change materials (PCM) have been regarded as one of the most promising candidates for the application of energy storage and temperature control due to their advantages in latent heat. However, their intrinsically low thermal conductivity (λ) is the Achilles heel, and the most common solution is to utilize thermal conductive reinforcements to fabricate composite PCMs. The research focus remains how to promote the efficiency of thermal conductive reinforcements. Here, a CNT-Cu foam hybrid reinforcement was fabricated through a high temperature tube furnace process. Different from conventional carbon film coated metal foam, CNTs with the length comparable to the pore size were radially grown on the surface of Cu foam with Ni catalysts, which can not only reduce the low-λ regions inside the foam skeleton, but also connect every branches of the foam to improve the integrity of the whole reinforcement, and the thermal conductivity of the composite was promoted to 3.49 W·m−1·K−1 from 0.105 W·m−1·K−1 of paraffin. Moreover, this reinforcement exhibited abilities to compensate the loss of latent heat and suppress the supercooling of the composite, indicating their great prospects in the application of phase change energy storage and temperature control. Keywords: Carbon nanotube, Cu foam, Phase change materials, Thermal conductivity

Secondary pollution by microorganisms and substances peeling off from the “growth ring” causes clean water deterioration during the water distribution process. In order to reduce the secondary pollution, our previous research investigated the best settings of a two-phase flow flushing method for pipeline cleaning in water distribution systems experimentally, and a case study was carried out for comparison of the efficiencies between two-phase and single-phase flow methods. In this paper, based on the results of the experimental study, numerical modelling and a simulation study are carried out by FLUENT to evaluate the performance of the two-phase flow flushing method for removal of the “growth ring”. Results: the simulation results match the experimental results; pressure, water-phase flow velocity and water-phase volume ratio distributions in a section of pipe are simulated and analysed; the shear force against time in a period is obtained; elbow pipes cause flushing energy loss, and therefore, at most one section of elbow pipe is flushed in one flushing period.

Tin telluride (SnTe), with the same rock salt structure and similar band structure of PbTe alloys, was developed as a good thermoelectric material. In this work, SnTe quasi crystal was grown by vertical Bridgman method, with texturing degree achieved at 0.98. Two sets of samples, perpendicular and parallel to the growth direction, were cut to investigate thermoelectric properties. As a result, a carrier concentration (pH) of ~9.5 × 1020 cm−3 was obtained, which may have originated from fully generated Sn vacancies during the long term crystal growth. The relatively high Seebeck coefficient of ~30 μVK−1 and ~40 μVK−1 along the two directions was higher than most pristine SnTe reported in the literature, which leads to the room temperature (PF) for SnTe_IP and SnTe_OP achieved at ~14.0 μWcm−1K−2 and ~7.0 μWcm−1K−2, respectively. Finally, the maximum dimensionless figure of merit (ZT) values were around 0.55 at 873 K.

In this work, solvent annealing process for CH3NH3PbI3 thin film prepared by single source evaporation was reported. Characterized by the scanning electron microscope (SEM), X-ray diffractometer (XRD), energy dispersive spectroscope (EDS), ultraviolet-visible (UV) spectrophotometer, and the photoluminescence (PL) spectrometer, our method ensured higher quality film with crystallinity, composition, well-defined grain structure, and reproducibility. The optimized solar cell device based on the structure of ITO/PEDOT:PSS/CH3NH3PbI3/PCBM/Ag achieved better performance in power conversion efficiency from 2.64% to 9.92%, providing an effective method to optimize the quality of perovskite film for solar cell application.

We provided a new method to improve the efficiency of Sb2S3 thin film solar cells. The TiO2 electron transport layers were doped by lithium to improve their charge extraction properties for the thermal-evaporated Sb2S3 solar cells. The Mott-Schottky curves suggested a change of energy band and faster charge transport in the Li-doped TiO2 films. Compared with the undoped TiO2, Li-doped mesoporous TiO2 dramatically improved the photo-voltaic performance of the thermal-evaporated Sb2S3 thin film solar cells, with the average power conversion efficiency (PCE) increasing from 1.79% to 4.03%, as well as the improved open-voltage (Voc), short-circuit current (Jsc) and fill factors. The best device based on Li-doped TiO2 achieved a power conversion efficiency up to 4.42% as well as a Voc of 0.645 V, which are the highest values among the reported thermal-evaporated Sb2S3 solar cells. This study showed that Li-doping on TiO2 can effectively enhance the charge extraction properties of electron transport layers, offering a new strategy to improve the efficiency of Sb2S3-based solar cells.

LaCl3 doped polycrystalline SnSe was synthesized by combining mechanical alloying (MA) process with spark plasma sintering (SPS). It is found that the electrical conductivity is enhanced after doping due to the increased carrier concentration and carrier mobility, resulting in optimization of the power factor at 750 K combing with a large Seebeck coefficient over 300 Μvk−1. Meanwhile, all the samples exhibit lower thermal conductivity below 1.0 W/mK in the whole measured temperature. The lattice thermal conductivity for the doped samples was reduced, which effectively suppressed the increscent of the total thermal conductivity because of the improved electrical conductivity. As a result, a ZT value of 0.55 has been achieved for the composition of SnSe-1.0 wt % LaCl3 at 750 K, which is nearly four times higher than the undoped one and reveals that rare earth element is an effective dopant for optimization of the thermoelectric properties of SnSe.

A surface acoustic wave based passive temperature sensor capable of multiple access is investigated. Binary Phase Shift Keying (BPSK) codes of eight chips were implemented using a reflective delay line scheme on a Y-Z LiNbO3 piezoelectric substrate. An accurate simulation based on the combined finite- and boundary element method (FEM/BEM) was performed in order to determine the optimum design parameters. The scaling factor ‘s’ and time delay factor ‘τ’ were extracted using signal processing techniques based on the wavelet transform of the correlation function, and then evaluated at various ambient temperatures. The scaling factor ‘s’ gave a more stable and reliable response to temperature than the time delay factor ‘τ’. Preliminary results show that the sensor response is fast and consistent subject to ambient temperature and it exhibits good linearity of 0.9992 with temperature varying from 0 to 130 °C.

Formation of bacterial films on structural surfaces often leads to severe contamination of medical devices, hospital equipment, implant materials, etc., and antimicrobial resistance of microorganisms has indeed become a global health issue. Therefore, effective therapies for controlling infectious and pathogenic bacteria are urgently needed. Being a promising active method for this purpose, surface acoustic waves (SAWs) have merits such as nanoscale earthquake-like vibration/agitation/radiation, acoustic streaming induced circulations, and localised acoustic heating effect in liquids. However, only a few studies have explored controlling bacterial growth and inactivation behaviour using SAWs. In this study, we proposed utilising piezoelectric thin film-based SAW devices on a silicon substrate for controlling bacterial growth and inactivation with and without using ZnO micro/nanostructures. Effects of SAW powers on bacterial growth for two types of bacteria, i.e., E. coli and S. aureus, were evaluated. Varied concentrations of ZnO tetrapods were also added into the bacterial culture to study their effects and the combined antimicrobial effects along with SAW agitation. Our results showed that when the SAW power was below a threshold (e.g., about 2.55 W in this study), the bacterial growth was apparently enhanced, whereas the further increase of SAW power to a high power caused inactivation of bacteria. Combination of thin film SAWs with ZnO tetrapods led to significantly decreased growth or inactivation for both E. coli and S. aureus, revealing their effectiveness for antimicrobial treatment. Mechanisms and effects of SAW interactions with bacterial solutions and ZnO tetrapods have been systematically discussed. [ABSTRACT FROM AUTHOR]