Search

Adsorption and activation for substrates and the stability of Pd species in Pd-based catalysts are imperative for their wider adoption in industrial and practical applications. However, the influence factor of these aspects has remained unclear. This indicates a need to understand the various perceptions of the structure–function relationship that exists between microstructure and catalytic performance. Herein, we revisit the catalytic performance of supported-ionic-liquid-phase stabilized Pd-based catalysts with nitrogen-containing ligands as a promoter for acetylene hydrochlorination, and try to figure out their regulation. We found that the absolute value of the differential energy, |Eads(C2H2)-Eads(HCl)|, is negative correlated with the stability of palladium catalysts. These findings imply that the optimization of the electron structure provides a new strategy for designing highly active yet durable Pd-based catalysts. [ABSTRACT FROM AUTHOR]

Purpose: This study evaluated the effects of screw preload loss on three implant systems, both in silico and in vitro., Methods: Three finite element analysis (FEA) models of implant restorations were created using bone-level (BL, 4.8×12 mm; BLX, 4.5×12 mm) and tissue-level (TL, 4.8×12 mm) implant systems. The screws in each group were subjected to preloads of 100 N and 200 N, with an additional 130 N load applied to the crown tops. An in vitro study of the principal strain was conducted using digital image correlation (DIC) under the same conditions as for the FEA models. The results were evaluated for von Mises stress, principal strain, and sensitivity index., Results: During loading, the highest stress levels were observed in the implants and screws. In the BL group, the screws experienced the highest von Mises stress at 466.04 MPa and 795.26 MPa in the 100 N and 200 N groups, respectively. The BLX group showed the highest von Mises stress at 439.33 MPa and 780.88 MPa in the implants in the 100 N and 200 N groups. Sensitivity analysis revealed that the screws and abutments in the TL group were significantly more affected by the preload changes., Conclusions: The abutment in the TL group was particularly sensitive to preload changes compared with those in the BL and BLX groups. Variations in the preload significantly affect the stress distribution in implants and screws. Maintaining screw preload stability under loading is crucial in clinical practice to prevent mechanical failure.

Purpose: To evaluate the effects of different hydrofluoric acid (HF) concentrations and etching times on the surface topography, roughness, and resin bond strength to ceramic-coated zirconia (CC), and to compare them with the effects of alumina air-abrasion combined with 10-MDP (AA)., Materials and Methods: AA and CC specimens were divided into 12 groups (N = 10). The CC groups were etched with HF at different concentrations (5% or 9.5%) for various durations (0 min, 1 min, 2 min, 3 min, 5 min or 10 min). The surface morphology was analyzed using SEM. Energy-dispersive x-ray spectroscopy (EDS) and x-ray diffraction (XRD) were performed for chemical and crystalline-phase analyses. Surface roughness (Ra) and shear bond strength (SBS) were recorded and statistically analyzed., Results: The SBS of CC groups initially increased, but then decreased with etching time for both HF acid concentrations. The 9.5% HF group displayed more marked topographical changes and higher Ra compared with the 5% HF group for the same etching period. Mean SBS was lower in the AA group compared with the CC groups etched with 5% HF for 2-10 min and 9.5% HF for 1-3 min (p < 0.05)., Conclusions: Different HF concentrations and etching times influenced the surface topography, roughness, and resin bond strength of/to ceramic-coated zirconia. Etching with 5% HF for 5 min and with 9.5% HF for 2 min, respectively, provided the highest SBS.

Purpose: To evaluate the effects of airborne-particle abrasion and MDP (methacryloyloxydecyl dihydrogen phosphate)-based primer treatment on the strength of resin bonds to highly translucent zirconia., Materials and Methods: Eight groups (n = 20 per group) of specimens were prepared with airborne-particle abrasion treatments (0.1-, 0.3-, or 0.6-MPa pressure) or not (untreated control) and MDP-based primer (treated) or not (untreated). Shear bond strength (SBS) tests were performed on the composite-to-ceramic bonded specimens either with or without thermocycling. After airborne-particle abrasion, the surface topography was evaluated by white light interferometry, and a phase analysis was conducted with x-ray diffraction (XRD). Surface roughness (Ra), surface energy (SE), and SBS measurements were statistically analyzed using either Tukey's HSD or the Kruskal-Wallis test, based on applicability. Lastly, the failure mode was observed by optical microscope and scanning electron microscope., Results: Airborne-particle abrasion resulted in significantly larger Ra (p < 0.05), especially with higher treatment pressures. Treatment with MDP-based primer caused significantly higher SE and SBS than airborne-particle abrasion alone (p < 0.05), both with and without aging., Conclusion: MDP-based primer can enhance the bond strength and reduce hydrolytic aging of the bonded interface for highly translucent zirconia, exceeding the effects of airborne-particle abrasion. It is recommended that MDP-based primer treatment be applied with a composite cement containing adhesive phosphate monomer.