Search

Viral load monitoring in human immunodeficiency virus type 1 (HIV-1) infection is often performed using reverse transcription quantitative PCR (RT-qPCR) to observe response to treatment and identify the development of resistance. Traceability is achieved using a calibration hierarchy traceable to the International Unit (IU). IU values are determined using consensus agreement derived from estimations by different laboratories. Such a consensus approach is necessary due to the fact that there are currently no reference measurement procedures available that can independently assign a reference value to viral reference materials for molecular in vitro diagnostic tests. Digital PCR (dPCR) is a technique that has the potential to be used for this purpose. In this paper, we investigate the ability of reverse transcriptase dPCR (RT-dPCR) to quantify HIV-1 genomic RNA without calibration. Criteria investigated included the performance of HIV-1 RNA extraction steps, choice of reverse transcription approach and selection of target gene with assays performed in both single and duplex format. We developed a protocol which was subsequently applied by two independent laboratories as part of an external quality assurance (EQA) scheme for HIV-1 genome detection. Our findings suggest that RT-dPCR could be used as reference measurement procedure to aid the value assignment of HIV-1 reference materials to support routine calibration of HIV-1 viral load testing by RT-qPCR.

Background Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) RNA quantities, measured by reverse transcription quantitative PCR (RT-qPCR), have been proposed to stratify clinical risk or determine analytical performance targets. We investigated reproducibility and how setting diagnostic cutoffs altered the clinical sensitivity of coronavirus disease 2019 (COVID-19) testing. Methods Quantitative SARS-CoV-2 RNA distributions [quantification cycle (Cq) and copies/mL] from more than 6000 patients from 3 clinical laboratories in United Kingdom, Belgium, and the Republic of Korea were analyzed. Impact of Cq cutoffs on clinical sensitivity was assessed. The June/July 2020 INSTAND external quality assessment scheme SARS-CoV-2 materials were used to estimate laboratory reported copies/mL and to estimate the variation in copies/mL for a given Cq. Results When the WHO-suggested Cq cutoff of 25 was applied, the clinical sensitivity dropped to about 16%. Clinical sensitivity also dropped to about 27% when a simulated limit of detection of 106 copies/mL was applied. The interlaboratory variation for a given Cq value was >1000 fold in copies/mL (99% CI). Conclusion While RT-qPCR has been instrumental in the response to COVID-19, we recommend Cq (cycle threshold or crossing point) values not be used to set clinical cutoffs or diagnostic performance targets due to poor interlaboratory reproducibility; calibrated copy-based units (used elsewhere in virology) offer more reproducible alternatives. We also report a phenomenon where diagnostic performance may change relative to the effective reproduction number. Our findings indicate that the disparities between patient populations across time are an important consideration when evaluating or deploying diagnostic tests. This is especially relevant to the emergency situation of an evolving pandemic.

The development and performance of molecular genetic assays has required increasingly complex quality assurance in recent years and continues to pose new challenges. Quality management officers, as well as academic and technical personnel are confronted with new molecular genetic parameters, methods, changing regulatory environments, questions regarding appropriate validation, and quality control for these innovative assays that are increasingly applying quantification and/or multiplex formats. Yet, quality assurance and quality control guidelines are still not widely available or in some circumstances have become outdated. For these reasons, the need for solutions to provide test confidence continues to grow. In order to integrate new test procedures into existing quality assurance measures, the ISO 15189 guideline can serve as an orientation. The ISO 15189 guideline describes requirements for medical laboratories and thus includes those performing molecular diagnostics. This article gives an overview of the possibilities and challenges in quality assurance of molecular parameters and shows possible solutions.

Throughout the history of horse racing, doping techniques to suppress or enhance performance have expanded to match the technology available. The next frontier in doping, both in the equine and human sports areas, is predicted to be genetic manipulation; either by prohibited use of genome editing, or gene therapy via transgenes. By using massively-parallel sequencing via a two-step PCR method we can screen for multiple doping targets at once in pooled primer sets. This method has the advantages of high scalability through combinational indexing, and the use of reference standards with altered sequences as controls. Custom software produces transgene-specific amplicons from any Ensembl-annotated genome to facilitate rapid assay design. Additional scripts batch-process FASTQ data from experiments, automatically quality-filtering sequences and assigning hits based on discriminatory motifs. We report here our experiences in establishing the workflow with an initial 31 transgene and vector feature targets. To evaluate the sensitivity of parallel sequencing in a real-world setting, we performed an intramuscular (IM) administration of a control rAAV vector into two horses and compared the detection sensitivity between parallel sequencing and real-time qPCR. Vector was detected by all assays on both methods up to 79 h post-administration, becoming sporadic after 96 h.

Summary Background Haematopoietic stem cells expressing the CD34 surface marker have been posited as a niche for Mycobacterium tuberculosis complex bacilli during latent tuberculosis infection. Our aim was to determine whether M tuberculosis complex DNA is detectable in CD34-positive peripheral blood mononuclear cells (PBMCs) isolated from asymptomatic adults living in a setting with a high tuberculosis burden. Methods We did a cross-sectional study in Ethiopia between Nov 22, 2017, and Jan 10, 2019. Digital PCR (dPCR) was used to determine whether M tuberculosis complex DNA was detectable in PBMCs isolated from 100 mL blood taken from asymptomatic adults with HIV infection or a history of recent household or occupational exposure to an index case of human or bovine tuberculosis. Participants were recruited from HIV clinics, tuberculosis clinics, and cattle farms in and around Addis Ababa. A nested prospective study was done in a subset of HIV-infected individuals to evaluate whether administration of isoniazid preventive therapy was effective in clearing M tuberculosis complex DNA from PBMCs. Follow-up was done between July 20, 2018, and Feb 13, 2019. QuantiFERON-TB Gold assays were also done on all baseline and follow-up samples. Findings Valid dPCR data (ie, droplet counts >10 000 per well) were available for paired CD34-positive and CD34-negative PBMC fractions from 197 (70%) of 284 participants who contributed data to cross-sectional analyses. M tuberculosis complex DNA was detected in PBMCs of 156 of 197 participants with valid dPCR data (79%, 95% CI 74–85). It was more commonly present in CD34-positive than in CD34-negative fractions (154 [73%] of 197 vs 46 [23%] of 197; p

Monkeypox was declared a public health emergency of international concern by the World Health Organization (WHO) on 23 July 2022. Between 1 January and 23 July 2022, 16,016 laboratory confirmed cases of monkeypox and five deaths were reported to WHO from 75 countries on all continents. Public health authorities are proactively identifying cases and tracing their contacts to contain its spread. As with COVID-19, PCR is the only method capable of being deployed at sufficient speed to provide timely feedback on any public health interventions. However, at this point, there is little information on how those PCR assays are being standardised between laboratories. A likely reason is that testing is still limited on a global scale and that detection, not quantification, of monkeypox virus DNA is the main clinical requirement. Yet we should not be complacent about PCR performance. As testing requirements increase rapidly and specimens become more diverse, it would be prudent to ensure PCR accuracy from the outset to support harmonisation and ease regulatory conformance. Lessons from COVID-19 should aid implementation with appropriate material, documentary and methodological standards offering dynamic mechanisms to ensure testing that most accurately guides public health decisions.

The use of standardized components and processes in engineering underpins the design-build-test model, and the engineering of biological systems is no different. Substantial efforts to standardize both the components and the methods to validate the engineered biological systems is ongoing. This study has developed a panel of control materials encoding the commonly used reporter genes GFP and RFP as DNA or RNA molecules. Each panel contained up to six samples with increasingly small copy number differences between the two reporter genes that ranged from 1- to 2-fold differences. These copy number differences represent the magnitude of changes that may need to be measured to validate an engineered system. Using digital PCR (dPCR), we demonstrated that it is possible to quantify changes in both gene and gene transcript numbers both within and between samples down to 1.05-fold. We corroborated these findings using a simple gene circuit within a bacterial model to demonstrate that dPCR was able to precisely identify small changes in gene expression of two transcripts in response to promoter stimulation. Finally, we used our findings to highlight sources of error that can contributed to the measurement uncertainty in the measurement of small ratios in biological systems. Together, the development of a panel of control materials and validation of a high accuracy method for the measurement of small changes in gene expression, this study can contribute to the engineering biology “toolkit” of methods and materials to support the current standardization efforts

Cerebrospinal fluid (CSF) is a source of diagnostic biomarkers for a range of neurological conditions. Cell-free DNA (cfDNA) is detected in CSF and differences in the concentration of cell-free mitochondrial DNA have been reported in studies of neurodegenerative disorders including Alzheimer's disease (AD). However, the influence of pre-analytical steps has not been investigated for cfDNA in CSF and there is no standardized approach for quantification of total cfDNA (copies of nuclear genome or mitochondria-derived gene targets). In this study, the suitability of four extraction methods was evaluated: QIAamp Circulating Nucleic Acid (Qiagen), Quick-cfDNA Serum & Plasma (Zymo), NucleoSnap® DNA Plasma (Macherey-Nagel) and Plasma/Serum Circulating DNA Purification Mini (Norgen) kits, for cfDNA extraction from CSF of controls and AD dementia patients, utilising a spike-in control for extraction efficiency and fragment size. One of the optimal extraction methods was applied to a comparison of cfDNA concentrations in CSF from control subjects, AD dementia and primary and secondary brain tumour patients. Extraction efficiency based on spike-in recovery was similar in all three groups whilst both endogenous mitochondrial and nucleus-derived cfDNA was significantly higher in CSF from cancer patients compared to control and AD groups, which typically contained < 100 genome copies/mL. This study shows that it is feasible to measure low concentration nuclear and mitochondrial gene targets in CSF and that normalization of extraction yield can help control pre-analytical variability influencing biomarker measurements.

A candidate digital PCR (dPCR)-based reference measurement procedure for quantification of human cytomegalovirus (hCMV) was evaluated in 10 viral load comparison schemes (seven external quality assessment (EQA) and three additional training schemes) organized by INSTAND e.V. over four years (between September 2014 and March 2018). Four metrology institutes participated in these schemes using the same extraction method and dPCR measurement procedure for the hCMV specific target sequence of UL54 gene. The calibration independent reference measurement procedure results from the metrology institutes were compared to the results of the clinical diagnostic laboratories applying hCMV qPCR measurement procedures calibrated to reference materials. While the criteria for the acceptable deviation from the target value interval for INSTAND's EQA schemes is from-0.8 log10 to +0.8 log(10), the majority of dPCR results were between-0.2 log10 to +0.2 log(10). Only 4 out of 45 results exceeded this interval with the maximum deviation of-0.542 log(10). In the training schemes containing samples with lower hCMV concentrations, more than half of the results deviated less than +/- 0.2 log(10) from the target value, while more than 95% deviated less than +/- 0.4 log(10) from the target value. Evaluation of intra-and inter-laboratory variation of dPCR results confirmed high reproducibility and trueness of the method. This work demonstrates that dPCR has the potential to act as a calibration independent reference measurement procedure for the value assignment of hCMV calibration and reference materials to support qPCR calibration as well as ultimately for routine hCMV load testing. This study was financially supported by the INFECTMET project (the EMRP project; jointly funded by the EMRP participating countries within EURAMET and the European Union, project no. HLT08); AntiMicroResist project (which has received funding from the EMPIR program co-financed by the Participating States and from the European Union’s Horizon 2020 research and innovation program, project no. 15HLT07); the Slovenian Research Agency (contract no. P4-0165 and 1000-13-0105); Ministry of Education, Science and Sport of republic of Slovenia (contract no. 3330-14-500133) and supported by the UK National Measurement System. The dPCR equipment used at NIB in this study was financed by the Metrology Institute of the Republic of Slovenia (MIRS), with financial support from the European Regional Development Fund. The funding source(s) had no involvement in study design; in the collection, analysis and interpretation of data; in the writing of the report; and in the decision to submit the article for publication. This publication reflects only the authors’ s views and EURAMET is not responsible for any use that may be made of the information it contains.

Testing has been central to our response to the COVID-19 pandemic. However, the accuracy of testing relies on standards, including reference materials, proficiency testing schemes, and information and reporting guidelines. The use of standards is a simple, inexpensive, and effective method to ensure reliable test results that inform clinical and public health decisions. Here we describe the central role of standards during the COVID-19 pandemic, where they have enabled population-scale screening, genomic surveillance and measures of immune protection measures. Given these benefits, the Coronavirus Standards Working Group (CSWG) was formed to coordinate standards in SARS-CoV-2 testing. This network of scientists has developed best-practices, reference materials, and conducted proficiency studies to harmonize laboratory performance. We propose that this coordinated development of standards should be prioritized as a key early step in the public health response to future pandemics that is necessary for reliable, large-scale testing for infectious disease.

The reverse transcription quantitative polymerase chain reaction (RT-qPCR) is an established tool for the diagnosis of RNA pathogens. Its potential for automation has caused it to be used as a presence/absence diagnostic tool even when RNA quantification is not required. This technology has been pushed to the forefront of public awareness by the COVID-19 pandemic, as its global application has enabled rapid and analytically sensitive mass testing, with the first assays targeting three viral genes published within days of the publication of the SARS-CoV-2 genomic sequence. One of those, targeting the RNA-dependent RNA polymerase gene, has been heavily criticised for supposed scientific flaws at the molecular and methodological level, and this criticism has been extrapolated to doubts about the validity of RT-qPCR for COVID-19 testing in general. We have analysed this assay in detail, and our findings reveal some limitations but also highlight the robustness of the RT-qPCR methodology for SARS-CoV-2 detection. Nevertheless, whilst our data show that some errors can be tolerated, it is always prudent to confirm that the primer and probe sequences complement their intended target, since, when errors do occur, they may result in a reduction in the analytical sensitivity. However, in this case, it is unlikely that a mismatch will result in poor specificity or a significant number of false-positive SARS-CoV-2 diagnoses, especially as this is routinely checked by diagnostic laboratories as part of their quality assurance.

Nucleic acid analysis is used in many areas of life sciences such as medicine, food safety, and environmental monitoring. Accurate, reliable measurements of nucleic acids are crucial for maximum impact, yet users are often unaware of the global metrological infrastructure that exists to support these measurements. In this work, we describe international efforts to improve nucleic acid analysis, with a focus on the Nucleic Acid Analysis Working Group (NAWG) of the Consultative Committee for Amount of Substance: Metrology in Chemistry and Biology (CCQM). The NAWG is an international group dedicated to improving the global comparability of nucleic acid measurements; its primary focus is to support the development and maintenance of measurement capabilities and the dissemination of measurement services from its members: the National Metrology Institutes (NMIs) and Designated Institutes (DIs). These NMIs and DIs provide DNA and RNA measurement services developed in response to the needs of their stakeholders. The NAWG members have conducted cutting edge work over the last 20 years, demonstrating the ability to support the reliability, comparability, and traceability of nucleic acid measurement results in a variety of sectors. Supplementary Information The online version contains supplementary material available at 10.1007/s00216-021-03712-x.

Funder: UK National Measurement System, Funder: NIHR BRC and NIHR Policy Research Programme (NIBSC Regulatory Science Research Unit), Funder: National Institute of Health Research (NIHR) Imperial Biomedical Research Centre (BRC), Funder: EMBL core funds, Funder: Quadram Institute Bioscience BBSRC Strategic Programme: Microbes in the Food Chain; Grant(s): BB/R012504/1) and its constituent projects BBS/E/F/000PR10348 and BBS/E/F/000PR10349, Despite the advent of whole genome metagenomics, targeted approaches (such as 16S rRNA gene amplicon sequencing) continue to be valuable for determining the microbial composition of samples. Amplicon microbiome sequencing can be performed on clinical samples from a normally sterile site to determine the aetiology of an infection (usually single pathogen identification) or samples from more complex niches such as human mucosa or environmental samples where multiple microorganisms need to be identified. The methodologies are frequently applied to determine both presence of micro-organisms and their quantity or relative abundance. There are a number of technical steps required to perform microbial community profiling, many of which may have appreciable precision and bias that impacts final results. In order for these methods to be applied with the greatest accuracy, comparative studies across different laboratories are warranted. In this study we explored the impact of the bioinformatic approaches taken in different laboratories on microbiome assessment using 16S rRNA gene amplicon sequencing results. Data were generated from two mock microbial community samples which were amplified using primer sets spanning five different variable regions of 16S rRNA genes. The PCR-sequencing analysis included three technical repeats of the process to determine the repeatability of their methods. Thirteen laboratories participated in the study, and each analysed the same FASTQ files using their choice of pipeline. This study captured the methods used and the resulting sequence annotation and relative abundance output from bioinformatic analyses. Results were compared to digital PCR assessment of the absolute abundance of each target representing each organism in the mock microbial community samples and also to analyses of shotgun metagenome sequence data. This ring trial demonstrates that the choice of bioinformatic analysis pipeline alone can result in different estimations of the composition of the microbiome when using 16S rRNA gene amplicon sequencing data. The study observed differences in terms of both presence and abundance of organisms and provides a resource for ensuring reproducible pipeline development and application. The observed differences were especially prevalent when using custom databases and applying high stringency operational taxonomic unit (OTU) cut-off limits. In order to apply sequencing approaches with greater accuracy, the impact of different analytical steps needs to be clearly delineated and solutions devised to harmonise microbiome analysis results.

MotivationQuantitative Real-time PCR (qPCR) is a widely used -omics method for the precise quantification of nucleic acids, in which the result is associated with the presence/absence or quantity of a specific nucleic acid sequence. As the amount of qPCR data increases worldwide, the manual assessment of results becomes challenging and difficult to reproduce. To overcome this, some automatable characteristics of amplification curves have been described in the literature, often with an appropriate “rule of thumb”.ResultsWe developed PCRedux to analyze and calculate 90 numerical qPCR amplification curve descriptors (‘‘features”) from large datasets of qPCR amplification curves that are aimed for interpretable machine learning and development of decision support systems. In a case study of a diverse dataset with 3181 positive, negative and ambiguous amplification curves, as assessed by three human raters, we demonstrate a sensitivity >99 % and specificity >97 % in detecting positive and negative amplification. PCRedux is unique as it goes beyond traditional qPCR analysis to capture curvature properties that improve the characterization and classification of amplification curves. The calculation of the features is reproducible and objective, since R is used as a controllable working environment. PCRedux is not a black box, but open source software following on the principle of mathematically interpretable features. These can be combined with user-defined labels for automatic multi-category classification and regression in machine learning.Availabilityhttps://cran.r-project.org/package=PCRedux. Web server: http://shtest.evrogen.net/PCRedux-app/. Documentation: https://PCRuniversum.github.io/PCRedux/.

COVID-19 has put the in-vitro-diagnostic community under an unprecedented spotlight, with a global requirement for accurate SARS-CoV-2 tests. This review will outline technological responses to this need and the analytical considerations required for their translation to routine use.SARS-CoV-2 diagnostic solutions directly detect the virus or measure host-derived surrogate markers of infection. With pressure upon supply chains for the 'traditional' molecular approaches, a wide variety of analytical tools spanning the molecular, serology, imaging and chemistry space are being developed, including high throughput solutions and simplified near-patient formats.The unique genetic nature of SARS-CoV-2 means high analytical specificity is achievable by most diagnostic formats. However, clinical sensitivity assessment is complicated by wide discrepancies in analytical range and challenges associated with standardising these differences. When coupled with the acute nature of SARS-CoV-2 infection, reported precise metrics of test performance must be questioned. The response to SARS-CoV-2 has delivered considerable diagnostic innovation, but for a technology to be maximised, it must be demonstrably reproducible and fit for purpose. If novel diagnostic solutions for SARS-CoV-2 are to succeed, equally innovative mechanisms are needed to ensure widespread clinical and surveillance application, enabling agreed standards and metrics to ensure comparability.

Introduction Haematopoietic stem cells expressing the CD34 surface marker have been posited as a niche for M. tuberculosis complex (MTBC) bacilli during latent tuberculosis infection (LTBI). Methods We conducted a cross-sectional study in Ethiopia to determine whether MTBC DNA was detectable in peripheral blood mononuclear cells (PBMC) isolated from 100 ml blood taken from 197 asymptomatic adults with a history of recent household TB contact and/or HIV infection, using digital polymerase chain reaction (dPCR). A nested prospective study was conducted in a sub-set of 43 HIV-infected individuals to evaluate whether administration of isoniazid preventive therapy (IPT) was effective in clearing MTBC DNA from PBMC. Results MTBC DNA was detected in PBMC of 156/197 participants (79.2%; 95% CI 73.5% to 84.9%). Where present, it was found more frequently in CD34-positive vs. CD34-negative PBMC (154/155 [99.4%] vs. 46/155 [29.7%], P Conclusions We report a novel molecular microbiological biomarker of LTBI with properties that are distinct from those of a commercial interferon-gamma release assay. Our findings implicate the bone marrow as a niche for M. tuberculosis in latently infected individuals. Detection of MTBC DNA in PBMC has potential applications in the diagnosis of LTBI, in monitoring response to chemoprophylaxis and as an outcome measure in clinical trials of interventions to prevent or treat LTBI.

A potent and heat-stable tetrodotoxin (TTX) has been found to accumulate in various marine bivalve species, including Pacific oysters (Crassostrea gigas), raising a food safety concern. While several studies on geographical occurrence of TTX have been conducted, there is a lack of knowledge about the distribution of the toxin within and between bivalves. We, therefore, measured TTX in the whole flesh, mantle, gills, labial palps, digestive gland, adductor muscle and intravalvular fluid of C. gigas using liquid chromatography-tandem mass spectrometry. Weekly monitoring during summer months revealed the highest TTX concentrations in the digestive gland (up to 242 µg/kg), significantly higher than in other oyster tissues. Intra-population variability of TTX, measured in the whole flesh of each of twenty animals, reached 46% and 32% in the two separate batches, respectively. In addition, an inter-population study was conducted to compare TTX levels at four locations within the oyster production area. TTX concentrations in the whole flesh varied significantly between some of these locations, which was unexplained by the differences in weight of flesh. This is the first study examining TTX distribution in C. gigas and the first confirmation of the preferential accumulation of TTX in oyster digestive gland.

Reverse transcription (RT)-PCR, the principal diagnostic method applied in the world-wide struggle against COVID-19, is capable of detecting a single molecule of a viral genome. Correctly designed and practiced RT-PCR assays for SARS-CoV-2 should not cross react with similar but distinct viral pathogens, such as the coronaviruses associated with the common cold, and should perform with very high analytical sensitivity. This analytical performance is predicated on the ability of the method to detect the presence of the selected nucleic acid target, without detection of a false positive signal.

Summary The term metagenomics refers to the use of sequencing methods to simultaneously identify genomic material from all organisms present in a sample, with the advantage of greater taxonomic resolution than culture or other methods. Applications include pathogen detection and discovery, species characterisation, antimicrobial resistance detection, virulence profiling, and study of the microbiome and microecological factors affecting health. However, metagenomics involves complex and multistep processes and there are important technical and methodological challenges that require careful consideration to support valid inference. We co-ordinated a multidisciplinary, international expert group to establish reporting guidelines that address specimen processing, nucleic acid extraction, sequencing platforms, bioinformatics considerations, quality assurance, limits of detection, power and sample size, confirmatory testing, causality criteria, cost, and ethical issues. The guidance recognises that metagenomics research requires pragmatism and caution in interpretation, and that this field is rapidly evolving.

We aim to test four one-step RT real-time mastermix options for use in SARS-CoV2 real-time PCR, with three primer/probe assays targeting the N gene. The lower limit of detection is determined using a SARS CoV2 N gene RNA transcript dilution series (to 1 copy/µl) and verified using 74 nose and throat swabs.The N2 assay demonstrates the most sensitive detection of SARS-Cov-2 RNA. Three of the four mastermixes performed well, with the Takara One Step PrimeScript™ III RT-PCR Kit mastermix demonstrating improved performance at the lower limit of detection.

Adventitious virus testing assures product safety by demonstrating the absence of viruses that may have been unintentionally introduced during the manufacturing process. The capabilities of next-generation sequencing (NGS) for broad virus detection in biologics have been demonstrated by the detection of known and novel viruses that were previously missed using the recommended routine assays for adventitious agent testing. A meeting was co-organized by the National Institute of Standards and Technology and the U.S. Food and Drug Administration on September 18–19, 2019 in Gaithersburg, Maryland, USA, to facilitate standardization of NGS technologies for applications of adventitious virus testing in biologics. The goal was to assess the currently used standards for virus detection by NGS and their public availability, and to identify additional needs for different types of reference materials and standards (natural and synthetic). The meeting focused on the NGS processes from sample preparation through sequencing but did not thoroughly cover bioinformatics, since this was considered to be the topic of a separate meeting.

BackgroundAntimicrobial resistance (AMR) poses a threat to public health. Clinical microbiology laboratories typically rely on culturing bacteria for antimicrobial susceptibility testing (AST). As the implementation costs and technical barriers fall, whole-genome sequencing (WGS) has emerged as a ‘one-stop’ test for epidemiological and predictive AST results. Few published comparisons exist for the myriad analytical pipelines used for predicting AMR. To address this, we performed an inter-laboratory study providing sets of participating researchers with identical short-read WGS data sequenced from clinical isolates, allowing us to assess the reproducibility of the bioinformatic prediction of AMR between participants and identify problem cases and factors that lead to discordant results.MethodsWe produced ten WGS datasets of varying quality from cultured carbapenem-resistant organisms obtained from clinical samples sequenced on either an Illumina NextSeq or HiSeq instrument. Nine participating teams (‘participants’) were provided these sequence data without any other contextual information. Each participant used their own pipeline to determine the species, the presence of resistance-associated genes, and to predict susceptibility or resistance to amikacin, gentamicin, ciprofloxacin and cefotaxime.ResultsIndividual participants predicted different numbers of AMR-associated genes and different gene variants from the same clinical samples. The quality of the sequence data, choice of bioinformatic pipeline and interpretation of the results all contributed to discordance between participants. Although much of the inaccurate gene variant annotation did not affect genotypic resistance predictions, we observed low specificity when compared to phenotypic AST results but this improved in samples with higher read depths. Had the results been used to predict AST and guide treatment a different antibiotic would have been recommended for each isolate by at least one participant.ConclusionsWe found that participants produced discordant predictions from identical WGS data. These challenges, at the final analytical stage of using WGS to predict AMR, suggest the need for refinements when using this technology in clinical settings. Comprehensive public resistance sequence databases and standardisation in the comparisons between genotype and resistance phenotypes will be fundamental before AST prediction using WGS can be successfully implemented in standard clinical microbiology laboratories.

Background: Haematopoietic stem cells expressing the CD34 surface marker have been posited as a niche for M. tuberculosis complex (MTBC) bacilli during latent tuberculosis infection (LTBI). Methods: We conducted a cross-sectional study in Ethiopia to determine whether MTBC DNA was detectable in peripheral blood mononuclear cells (PBMC) isolated from 100 ml blood taken from 197 asymptomatic adults with a history of recent household TB contact and/or HIV infection, using digital polymerase chain reaction (dPCR). A nested prospective study was conducted in a sub-set of 43 HIV-infected individuals to evaluate whether administration of isoniazid preventive therapy (IPT) was effective in clearing MTBC DNA from PBMC. Results: MTBC DNA was detected in PBMC of 156/197 participants (79.2%; 95% CI 73.5% to 84.9%). Where present, it was found more frequently in CD34-positive vs. CD34-negative PBMC (154/155 [99.4%] vs. 46/155 [29.7%], P

Background The global COVID-19 pandemic has led to extensive development in many fields, including the diagnosis of COVID-19 infection by mass spectrometry. The aim of this systematic review and meta-analysis was to assess the accuracy of mass spectrometry diagnostic tests developed so far, across a wide range of biological matrices, and additionally to assess risks of bias and applicability in studies published to date. Method 23 retrospective observational cohort studies were included in the systematic review using the PRISMA-DTA framework, with a total of 2858 COVID-19 positive participants and 2544 controls. Risks of bias and applicability were assessed via a QUADAS-2 questionnaire. A meta-analysis was also performed focusing on sensitivity, specificity, diagnostic accuracy and Youden's Index, in addition to assessing heterogeneity. Findings Sensitivity averaged 0.87 in the studies reviewed herein (interquartile range 0.81–0.96) and specificity 0.88 (interquartile range 0.82–0.98), with an area under the receiver operating characteristic summary curve of 0.93. By subgroup, the best diagnostic results were achieved by viral proteomic analyses of nasopharyngeal swabs and metabolomic analyses of plasma and serum. The performance of other sampling matrices (breath, sebum, saliva) was less good, indicating that these protocols are currently insufficiently mature for clinical application. Conclusions This systematic review and meta-analysis demonstrates the potential for mass spectrometry and ‘omics in achieving accurate test results for COVID-19 diagnosis, but also highlights the need for further work to optimize and harmonize practice across laboratories before these methods can be translated to clinical applications.

Background This study aimed to evaluate the impact of four different reverse transcription quantitative PCR (RT-qPCR) master mixes on the performance of SARS-CoV-2 diagnostic PCRs using three primer/probe assays targeting the N gene (A, B and C). The dynamic range and lowest detected quantity was determined using a SARS-CoV-2 partial N gene RNA transcript dilution series (100,000–1 copy/μl) and verified using 72 nose and throat swabs, 29 of which tested positive for SARS-CoV-2 RNA. Results Assay C consistently detected the lowest quantity of partial N gene RNA transcript with all mastermixes. The Takara One Step PrimeScript™ III RT-PCR Kit mastermix enabled all primer pairs to detect the entire dynamic range evaluated, with the Qiagen Quantifast and Thermofisher TaqPath 1-Step kits also performing well. Sequences from all three primer/probe sets tested in this study (assay A, B and C) have 100 % homology to ≥97 % of the of SARS-CoV-2 sequences available up to 31st December 2020 (n = 291,483 sequences). Conclusions This work demonstrates that specific assays (in this case assay C) can perform well in terms of dynamic range and lowest detected quantity regardless of the mastermix used. However we also show that, by choosing the most appropriate mastermix, poorer performing primer pairs are also able to detect all of the template dilutions investigated. This work increases the potential options when choosing assays for SARS-CoV-2 diagnosis and provides solutions to enable them to work with optimal analytical sensitivity.

BACKGROUND Tyrosine kinase inhibitors (TKIs) are the cornerstone of successful clinical management of patients with chronic myeloid leukemia (CML). Quantitative monitoring of the percentage of the fusion transcript BCR-ABL1 (breakpoint cluster region–c-abl oncogene 1, non-receptor tyrosine kinase) BCR-ABL1IS (%BCR-ABL1IS) by reverse transcription–quantitative PCR (RT-qPCR) is the gold standard strategy for evaluating patient response to TKIs and classification into prognostic subgroups. However, this approach can be challenging to perform in a reproducible manner. Reverse-transcription digital PCR (RT-dPCR) is an adaptation of this method that could provide the robust and standardized workflow needed for truly standardized patient stratification. METHODS BCR-ABL1 and ABL1 transcript copy numbers were quantified in a total of 102 samples; 70 CML patients undergoing TKI therapy and 32 non-CML individuals. 3 commercially available digital PCR platforms (QS3D, QX200 and Raindrop) were compared with the platform routinely used in the clinic for RT-qPCR using the EAC (Europe Against Cancer) assay. RESULTS Measurements on all instruments correlated well when the %BCR-ABL1IS was ≥0.1%. In patients with residual disease below this level, greater variations were measured both within and between instruments limiting comparable performance to a 4 log dynamic range. CONCLUSIONS RT-dPCR was able to quantify low-level BCR-ABL1 transcript copies but was unable to improve sensitivity below the level of detection achieved by RT-qPCR. However, RT-dPCR was able to perform these sensitive measurements without use of a calibration curve. Adaptions to the protocol to increase the amount of RNA measured are likely to be necessary to improve the analytical sensitivity of BCR-ABL testing on a dPCR platform.

This study tested the claim that digital PCR (dPCR) can offer highly reproducible quantitative measurements in disparate laboratories. Twenty-one laboratories measured four blinded samples containing different quantities of a KRAS fragment encoding G12D, an important genetic marker for guiding therapy of certain cancers. This marker is challenging to quantify reproducibly using quantitative PCR (qPCR) or next generation sequencing (NGS) due to the presence of competing wild type sequences and the need for calibration. Using dPCR, 18 laboratories were able to quantify the G12D marker within 12% of each other in all samples. Three laboratories appeared to measure consistently outlying results; however, proper application of a follow-up analysis recommendation rectified their data. Our findings show that dPCR has demonstrable reproducibility across a large number of laboratories without calibration. This could enable the reproducible application of molecular stratification to guide therapy and, potentially, for molecular diagnostics.

Background Mycobacterium tuberculosis resistance to anti-tuberculosis drugs is a major threat to global public health. Whole genome sequencing (WGS) is rapidly gaining traction as a diagnostic tool for clinical tuberculosis settings. To support this informatically, previous work led to the development of the widely used TBProfiler webtool, which predicts resistance to 14 drugs from WGS data. However, for accurate and rapid high throughput of samples in clinical or epidemiological settings, there is a need for a stand-alone tool and the ability to analyse data across multiple WGS platforms, including Oxford Nanopore MinION. Results We present a new command line version of the TBProfiler webserver, which includes hetero-resistance calling and will facilitate the batch processing of samples. The TBProfiler database has been expanded to incorporate 178 new markers across 16 anti-tuberculosis drugs. The predictive performance of the mutation library has been assessed using > 17,000 clinical isolates with WGS and laboratory-based drug susceptibility testing (DST) data. An integrated MinION analysis pipeline was assessed by performing WGS on 34 replicates across 3 multi-drug resistant isolates with known resistance mutations. TBProfiler accuracy varied by individual drug. Assuming DST as the gold standard, sensitivities for detecting multi-drug-resistant TB (MDR-TB) and extensively drug-resistant TB (XDR-TB) were 94% (95%CI 93–95%) and 83% (95%CI 79–87%) with specificities of 98% (95%CI 98–99%) and 96% (95%CI 95–97%) respectively. Using MinION data, only one resistance mutation was missed by TBProfiler, involving an insertion in the tlyA gene coding for capreomycin resistance. When compared to alternative platforms (e.g. Mykrobe predictor TB, the CRyPTIC library), TBProfiler demonstrated superior predictive performance across first- and second-line drugs. Conclusions The new version of TBProfiler can rapidly and accurately predict anti-TB drug resistance profiles across large numbers of samples with WGS data. The computing architecture allows for the ability to modify the core bioinformatic pipelines and outputs, including the analysis of WGS data sourced from portable technologies. TBProfiler has the potential to be integrated into the point of care and WGS diagnostic environments, including in resource-poor settings.

Over the past two decades a number of studies have demonstrated activity of the retroviral enzyme reverse transcriptase in the serum of patients with sporadic amyotrophic lateral sclerosis (ALS). Known human exogenous retroviruses such as HIV-1 have been eliminated as possible sources of this activity and investigators have therefore considered the possibility that human endogenous retroviruses (HERVs) might be involved. HERV-K (HML-2) is the most recent retroviral candidate to be proposed following the observation of elevated HERV-K expression in cortical and spinal neurons of ALS patients and the demonstration of HERV-K envelope protein neurotoxicity in vitro and in transgenic mice. This retroviral hypothesis is an attractive one, not least because it raises the possibility that ALS might become treatable using antiretroviral drugs. In the present study we have attempted independent confirmation of the observation that HERV-K RNA levels are elevated in ALS brain. Total RNA was extracted from the postmortem premotor cortex of 34 patients with ALS and 23 controls. Quantitative real-time reverse transcription PCR (RT-qPCR) was performed according to the MIQE guidelines using HERV-K gag, pol and env primer sets. Data was analysed by the 2-∆∆Ct method with normalisation against two reference genes, GAPDH and XPNPEP1. Geometric mean HERV-K RNA expression levels in the premotor cortex of ALS patients were not found to be different from the expression levels in non-ALS controls. Our findings do not confirm the recently reported association between elevated cortical HERV-K RNA levels and ALS, and thus raise doubts about the role of this endogenous retrovirus in ALS pathogenesis. The results of this study may have implications for ongoing clinical trials aiming to suppress HERV-K activity with antiretroviral drugs. Electronic supplementary material The online version of this article (10.1186/s40478-019-0698-2) contains supplementary material, which is available to authorized users.

The Water Framework Directive (WFD) regulates freshwater and coastal water quality assessment in Europe. Chemical and ecological water quality status is based on measurements of chemical pollutants in water and biota together with other indicators such as temperature, nutrients, species compositions (phytoplankton, microalgae, benthos and fish) and hydromorphological conditions. However, in the current strategy a link between the chemical and the ecological status is missing. In the present WFD, no microbiological indicators are foreseen for integrating the different anthropogenic pressures, including mixtures of chemicals, nutrients and temperature changes, to provide a holistic view of the freshwater ecosystem water quality. The main aim of this work was to evaluate if natural microbial populations can be valuable indicators of multiple stressors (e.g. chemical pollutants, temperature, nutrients etc.) to guide preventive and remediation actions by water authorities. A preliminary survey was conducted to identify four sites reflecting a contamination gradient from the source to the mouth of a river suitable to the objectives of the European Marie Curie project, MicroCoKit. The River Tiber (Italy) was selected as a pilot case study to investigate the correlation between bacteria taxa and the chemical status of the river. The main physicochemical parameters, inorganic elements, organic pollutants and natural microbial community composition were assessed at four selected sites corresponding to pristine, agricultural, industrial and urban areas for three consecutive years. The overall chemical results indicated a correspondence between different groups of contaminants and the main contamination sources at the selected sampling points. Phylogenetic analysis of the microbial community analyzed by Fluorescence In Situ Hybridization method (FISH) revealed differences among the four sampling sites which could reflect an adaptive bacterial response to the different anthropogenic pressures.

A potent and heat-stable tetrodotoxin (TTX) has been found to accumulate in various marine bivalve species, including Pacific oysters (Crassostrea gigas), raising a food safety concern. While several studies on geographical occurrence of TTX have been conducted, there is a lack of knowledge about the distribution of the toxin within and between bivalves. We, therefore, measured TTX in the whole flesh, mantle, gills, labial palps, digestive gland, adductor muscle and intravalvular fluid of C. gigas using liquid chromatography-tandem mass spectrometry. Weekly monitoring during summer months revealed the highest TTX concentrations in the digestive gland (up to 242 µg/kg), significantly higher than in other oyster tissues. Intra-population variability of TTX, measured in the whole flesh of each of twenty animals, reached 46% and 32% in the two separate batches, respectively. In addition, an inter-population study was conducted to compare TTX levels at four locations within the oyster production area. TTX concentrations in the whole flesh varied significantly between some of these locations, which was unexplained by the differences in weight of flesh. This is the first study examining TTX distribution in C. gigas and the first confirmation of the preferential accumulation of TTX in oyster digestive gland.