408 results on '"Jiang, Fulin"'
Search Results
2. An enhanced water-lubrication method: Friction-reducing and diffusion properties of secondary lubricants
3. Evaluation of optimal anterior-posterior position of upper incisors through ANS point: a retrospective study on a Chinese sample
4. Deformation mechanisms and microstructural characteristics of AZ61 magnesium alloys processed by a continuous expansion extrusion approach
5. Signal interference between drugs and metabolites in LC-ESI-MS quantitative analysis and its evaluation strategy
6. Microstructural Evolution and Mechanical Properties of a Continuously Cast Al–Mg–Si–Cu Alloy Processed by Repetitive Continuous Extrusion Forming
7. Microstructure, mechanical properties, and strengthening mechanisms of ultra-high strength Al-Zn-Mg-Cu alloy prepared by continuous extrusion forming process
8. Reinforcement learning-based energy efficiency optimization for RIS-Assisted UAV hybrid uplink and downlink system
9. Analysis on the Difficulty of Controlling Repugnant Markets
10. A Hybrid Layout Method Based on GPU for the Logistics Facility Layout Problem
11. Bias Analysis in the Simulation of the Western North Pacific Tropical Cyclone Characteristics by Two High-Resolution Global Atmospheric Models
12. Detecting representative characteristics of different genders using intraoral photographs: a deep learning model with interpretation of gradient-weighted class activation mapping
13. Deformation mechanisms and mechanical properties of the high-strength and ductile Al-Zn-Mg-Cu alloys processed by repetitive continuous extrusion forming process with different heat treatments
14. Evaluation of automated detection of head position on lateral cephalometric radiographs based on deep learning techniques
15. Influence of pre-precipitation on the multi-stage hot deformation behavior of an Al-Cu-Mg-Zr alloy: Experiments and integrated modeling
16. A Hybrid Layout Method Based on GPU for the Logistics Facility Layout Problem
17. Additive manufacturing of fine-grained high-strength titanium alloy via multi-eutectoid elements alloying
18. Microstructural characteristics and deformation behaviors of an Al–Mg–Si alloy with improved strength and conductivity processed by continuous casting and expansion extrusion
19. Effect of quenching residual stress on precipitation behaviour of 7085 aluminium alloy
20. Microstructural characteristics and tribological behavior of an additively manufactured Ti-6Al-4V alloy under direct aging and solution-aging treatments
21. Phase transformation mechanisms, microstructural characteristics and mechanical performances of an additively manufactured Ti-6Al-4V alloy under dual-stage heat treatment
22. Revealing the cryogenic-temperature toughness and deformation mechanisms in high manganese austenitic steels
23. Unraveling precipitation evolution and strengthening function of the Al-Zn-Mg-Cu alloys with various Zn contents: Multiple experiments and integrated internal-state-variable modeling
24. Constitutive and microstructural characteristics of Ti-5Al-2.5Sn alloy during isothermal and non-isothermal multi-stage hot deformation across different phase regions
25. Diagnostic validity of different gonial angle segmentation for the assessment of mandibular growth direction: A retrospective study
26. Experimental and modeling investigations of the non-isothermal and isothermal precipitations in an Al-Cu-Mg-Zr alloy with various pre-precipitation microstructures
27. Revealing the decomposition mechanisms of dislocations and metastable α' phase and their effects on mechanical properties in a Ti-6Al-4V alloy
28. Plastic Workability and Rheological Stress Model Based on an Artificial Neural Network of SiC p /Al-7.75Fe-1.04V-1.95Si Composites.
29. Influence of sea wave shock on transient start-up performance of water-lubricated bearing
30. Effect of energy density on the microstructure and properties of the CrFeCoNiNb high-entropy cladded layer
31. Microstructure, mechanical properties and deformation mechanisms of an Al-Mg alloy processed by the cyclical continuous expanded extrusion and drawing approach
32. Evaluation of modified clear Twin Block aligner in treating adolescents with skeletal class II malocclusion: A two‐centre cephalometric study
33. Microstructure evolution and corrosion resistance improvement of Mg–Gd–Y–Zn–Zr alloys via surface hydrogen treatment
34. Microstructure, mechanical properties and deformation characteristics of Al-Mg-Si alloys processed by a continuous expansion extrusion approach
35. Unravelling the precipitation evolutions of AZ80 magnesium alloy during non-isothermal and isothermal processes
36. Programmable mechanical properties of additively manufactured novel steel.
37. Microstructure and mechanical behaviors of 6061 Al matrix hybrid composites reinforced with SiC and stainless steel particles
38. Recent innovations in laser additive manufacturing of titanium alloys
39. Comparative Hot Workability Characteristics of an Al–Si/SiCp Aluminium Matrix Composite Hybrid Reinforced with Various TiB2 Additions
40. Integrated physically based modeling for the multiple static softening mechanisms following multi-stage hot deformation in Al-Zn-Mg-Cu alloys
41. Reduced residual stress and retained properties in Al-Zn-Mg-Cu alloys using a novel cladding quenching process
42. Nonadditive strengthening functions for cold-worked cubic metals: Experiments and constitutive modeling
43. Static softening behavior and modeling of an Al–Cu–Mg–Zr alloy with various pre-precipitation microstructures during multistage hot deformation
44. Post-dynamic α to β phase transformation and reverse transformation of Ti-5Al-3V alloy after hot deformation in two phase region
45. Recent Innovations in Laser Additive Manufacturing of Titanium Alloys
46. Effect of the Nb content on the microstructure evolution and properties of the CrFeCoNiNbx layers prepared by laser cladding
47. Microstructure, Mechanical Properties, and Strengthening Mechanisms of Ultra-High Strength Al-Zn-Mg-Cu Alloy Prepared by Continuous Extrusion Forming Process
48. Effect of Zn content on the static softening behavior and kinetics of Al–Zn–Mg–Cu alloys during double-stage hot deformation
49. Strain path dependent evolutions of microstructure and texture in AZ80 magnesium alloy during hot deformation
50. Simultaneous determination of curcumin, tetrahydrocurcumin, quercetin, and paeoniflorin by UHPLC-MS/MS in rat plasma and its application to a pharmacokinetic study
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.