Search

Abstract While chronic limb-threatening ischemia is a serious peripheral artery disease, the lack of an appropriate stent significantly limits the potential of interventional treatment. In spite of much progress in coronary stents, little is towards peripheral stents, which are expected to be both long and biodegradable and thus require a breakthrough in core techniques. Herein, we develop a long and biodegradable stent with a length of up to 118 mm based on a metal-polymer composite material. To achieve a well-prepared homogeneous coating on a long stent during ultrasonic spraying, a magnetic levitation is employed. In vivo degradation of the stent is investigated in rabbit abdominal aorta/iliac arteries, and its preclinical safety is evaluated in canine infrapopliteal arteries. First-in-man implantation of the stent is carried out in the below-the-knee artery. The 13 months’ follow-ups demonstrate the feasibility of the long and biodegradable stent in clinical applications.

While mild hyperthermia holds great potential in the treatment of solid tumors, the thermal stress-triggered self-repairing autophagy significantly compromises its efficacy. To circumvent this obstacle, an injectable hydrogel (NO-Gel) composed of thermosensitive poly(ethylene glycol)-polypeptide copolymers modified with abundant NO donors on their side chains is developed. Meanwhile, ferrimagnetic Zn0.5Fe2.5O4 magnetic nanoparticles (MNPs) with high magnetic-heat conversion efficiency are synthesized and loaded into NO-Gel to obtain MNPs@NO-Gel. The MNPs@NO-Gel system exhibits a sol-gel transition upon heating, and has the ability to perform multiple magnetic hyperthermia therapy (MHT) after only one administration due to the even distribution and strong immobilization of MNPs in NO-Gel. NO can be continuously liberated from NO-Gel and this process is markedly accelerated by MHT. Additionally, MNPs@NO-Gel maintains its integrity in vivo for over one month and the released MNPs are metabolized by the spleen. After a single administration of MNPs@NO-Gel at the tumor site, three mild MHT treatments with similar effects are fulfilled, and the sufficient supply of NO effectively inhibits MHT-induced autophagic flux via blocking the formation of autophagosomes and synchronously destroying lysosomes, thereby substantially boosting the efficacy of mild MHT. As a consequence, CT-26 colon tumors are completely eliminated without causing severe side-effects.

Patients who suffer from severe tricuspid regurgitation (TR) and who are at high surgical risk have no standard care therapy. Therefore, minimally invasive and safer methods are sought. K-clip™, the first ultrasound-positioned interventional tricuspid annuloplasty instrument intended for percutaneous transcatheter repair. We report a patient with severe functional TR and high surgical risk who underwent K-clip™ tricuspid annuloplasty under echocardiography and fluoroscopy guidance.

Abstract Background Good osseointegration is the key to the long-term stability of bone implants. Thermoplastic polyetheretherketone (PEEK) has been widely used in orthopedics; however, its inherent biological inertia causes fibrous tissue to wrap its surface, which leads to poor osseointegration and thus greatly limits its clinical applications. Methods Herein, we developed a facile yet effective surface modification strategy. A commonly used sulfonation coupled with “cold pressing” treatment in the presence of porogenic agent formed a three-dimensional hierarchical porous structure on PEEK surface. Subsequently, the effects of porous surface on the in vitro adhesion, proliferation and differentiation of rat bone marrow-derived mesenchymal stem cells (BMSCs) were evaluated. Finally, the osteoinduction and osseointegration of surface-porous PEEK implant were examined in the rat distal femoral defect model. Results In vitro results showed that the surface modification did not significantly affect the mechanical performance and cytocompatibility of PEEK substance, and the porous structure on the modified PEEK substrate provided space for cellular ingrowth and enhanced osteogenic differentiation and mineralization of BMSCs. In vivo tests demonstrated that the surface-porous PEEK implant could effectively promote new bone formation and had higher bone-implant contact rate, thereby achieving good bone integration with the surrounding host bone. In addition, this modification technique was also successfully demonstrated on a medical PEEK interbody fusion cage. Conclusion The present study indicates that topological morphology plays a pivotal role in determining implant osseointegration and this facile and effective modification strategy developed by us is expected to achieve practical applications quickly. Graphical Abstract

While most studies of mechanical stimulation of cells are focused on two-dimensional (2D) and three-dimensional (3D) systems, it is rare to study the effects of cyclic stretching on cells under a quasi-3D microenvironment as a linkage between 2D and 3D. Herein, we report a new method to prepare an elastic membrane with topographic microstructures and integrate the membrane into a microfluidic chip. The fabrication difficulty lay not only in the preparation of microstructures but also in the alignment and bonding of the patterned membrane to other layers. To resolve the problem, we designed and assembled a fast aligner that is cost-effective and convenient to operate. To enable quasi-3D microenvironment of cells, we fabricated polydimethylsiloxane (PDMS) microwell arrays (formed by micropillars of a few microns in diameter) with the microwell diameters close to the cell sizes. An appropriate plasma treatment was found to afford a coating-free approach to enable cell adhesion on PDMS. We examined three types of cells in 2D, quasi-3D, and 3D microenvironments; the cell adhesion results showed that quasi-3D cells behaved between 2D and 3D cells. We also constructed transgenic human mesenchymal stem cells (hMSCs); under cyclic stretching, the visualizable live hMSCs in microwells were found to orientate differently from in a 3D Matrigel matrix and migrate differently from on a 2D flat plate. This study not only provides valuable tools for microfabrication of a microfluidic device for cell studies, but also inspires further studies of the topological effects of biomaterials on cells.

Atherosclerotic disease is a substantial global burden, and existing treatments, such as statins, are recommended to lower low-density lipoprotein cholesterol (LDL-C) levels and inhibit the progression of atherosclerosis. However, side effects, including gastrointestinal unease, potential harm to the liver, and discomfort in the muscles, might be observed. In this study, we propose a novel method using periodic mesoporous silica nanoparticles (PMS) to create heparin-modified PMS (PMS-HP) with excellent biocompatibility, enabling selective removal of LDL-C from the blood. In vitro, through the introduction of PMS-HP into the plasma of mice, we observed that, compared to PMS alone, PMS-HP could selectively adsorb LDL-C while avoiding interference with valuable components such as plasma proteins and high-density lipoprotein cholesterol (HDL-C). Notably, further investigations revealed that the adsorption of LDL-C by PMS-HP could be well-fitted to quasi-first-order (R2 = 0.993) and quasi-second-order adsorption models (R2 = 0.998). Likewise, in vivo, intravenous injection of PMS-HP enabled targeted LDL-C adsorption (6.5 ± 0.73 vs. 8.6 ± 0.76 mM, p < 0.001) without affecting other plasma constituents, contributing to reducing intravascular plaque formation (3.66% ± 1.06% vs. 1.87% ± 0.79%, p < 0.05) on the aortic wall and inhibiting vascular remodeling (27.2% ± 6.55% vs. 38.3% ± 1.99%, p < 0.05). Compared to existing lipid adsorption techniques, PMS-HP exhibited superior biocompatibility and recyclability, rendering it valuable for both in vivo and in vitro applications.

Background: To develop and validate a nomogram prediction model for assessing the risk of major adverse cardiovascular and cerebrovascular events (MACCE) in patients with nonvalvular atrial fibrillation (NVAF) and heart failure with preserved ejection fraction (HFpEF) within one year of discharge. Methods: We enrolled 828 patients with NVAF and HFpEF from May 2017 to March 2022 in Zhongda Hospital as the training cohort, and 564 patients with NVAF and HFpEF in Taizhou People’s Hospital between August 2018 and March 2022 as the validation cohort. A total of 35 clinical features, including baseline characteristics, past medical records, and detection index, were used to create a prediction model for MACCE risk. The optimized model was verified in the validation cohort. Calibration plots, the Hosmer-Lemeshow test, and decision curve analyses (DCA) were utilized to assess the accuracy and clinical efficacy of the nomogram. Results: MACCE occurred in 23.1% of all patients within one year of discharge. The nomogram identified several independent risk factors for MACCE, including atrial fibrillation duration ≥6 years, poor medication compliance, serum creatinine level, hyperthyroidism, serum N-terminal pro-brain natriuretic peptide level, and circumferential end-diastolic stress. The DCA demonstrated the excellent efficacy of the prediction model for the MACCE end-point, with a wide range of high-risk threshold probabilities in both cohorts. The Hosmer-Lemeshow test confirmed that momogram predictions fit for both the training (p = 0.573) and validation (p = 0.628) cohorts. Conclusions: This nomogram prediction model may offer a quantitative tool for estimating the risk of MACCE in patients with NVAF and HFpEF within one year of discharge.

An appropriate cell microenvironment is key to tissue engineering and regenerative medicine. Revealing the factors that influence the cell microenvironment is a fundamental research topic in the fields of cell biology, biomaterials, tissue engineering, and regenerative medicine. The cell microenvironment consists of not only its surrounding cells and soluble factors, but also its extracellular matrix (ECM) or nearby external biomaterials in tissue engineering and regeneration. This review focuses on six aspects of biomaterial–related cell microenvironments: ① chemical composition of materials, ② material dimensions and architecture, ③ material–controlled cell geometry, ④ effects of material charges on cells, ⑤ matrix stiffness and biomechanical microenvironment, and ⑥ surface modification of materials. The present challenges in tissue engineering are also mentioned, and eight perspectives are predicted.

Background: Evolocumab has been demonstrated to significantly reduce ischemic cardiovascular events in patients with stable coronary heart disease. However, it is currently unclear whether this benefit extends to patients with acute coronary syndrome (ACS) and multivessel disease (MVD) undergoing percutaneous coronary intervention (PCI). The objective of this study was to assess the safety, efficacy and feasibility of the early addition of evolocumab to statin treatment for ACS patients with MVD undergoing PCI. Methods: The authors conducted a multicenter, retrospective cohort study involving 1199 ACS patients with MVD undergoing PCI and with elevated low-density lipoprotein cholesterol (LDL-C) levels. Patients were divided into an evolocumab group or a standard-of-care group based on evolocumab use or not. The 18-month primary efficacy endpoint was a composite of ischemic stroke, death from cardiac causes, recurrent myocardial infarction (MI), unplanned coronary revascularization or unstable angina requiring hospitalization. The principal secondary efficacy endpoint was a composite of ischemic stroke, death from cardiac causes or recurrent MI. Results: After propensity score matching, the addition of evolocumab to statin treatment lowered LDL-C levels by 42.62% compared with statin therapy alone at 18 months, from a mean baseline level of 3.37–0.75 mmol/L (p < 0.001). Relative to standard therapy, evolocumab added to statins was associated with significant reductions in the primary efficacy endpoint (8.3% vs. 13.3%; adjusted hazard ratio [HR], 0.60; 95% confidence interval [CI], 0.39 to 0.91; p = 0.017) and the principal secondary efficacy endpoint (6.1% vs. 10.2%; adjusted HR, 0.61; 95% CI, 0.37 to 0.99; p = 0.048) after multivariable Cox regression adjustment. The treatment effect of evolocumab was consistent across all prespecified subgroups. There were no significant between-group differences in terms of adverse events. Conclusions: In ACS patients with MVD taken for PCI, early initiation of evolocumab along with statin treatment was associated with a significant reduction in LDL-C levels and a reduced risk of recurrent cardiovascular events. Clinical Trial Registration: Chinese Clinical Trials Registry, identifier ChiCTR2000035165. Date: 2 August 2020. URL: https://www.chictr.org.cn/.

It is very challenging to visualize implantable medical devices made of biodegradable polymers in deep tissues. Herein, we designed a novel macromolecular contrast agent with ultrahigh radiopacity (iodinate content > 50%) via polymerizing an iodinated trimethylene carbonate monomer into the two ends of poly(ethylene glycol) (PEG). A set of thermosensitive and biodegradable polyester-PEG-polyester triblock copolymers with varied polyester compositions synthesized by us, which were soluble in water at room temperature and could spontaneously form hydrogels at body temperature, were selected as the demonstration materials. The addition of macromolecular contrast agent did not obviously compromise the injectability and thermogelation properties of polymeric hydrogels, but conferred them with excellent X-ray opacity, enabling visualization of the hydrogels at clinically relevant depths through X-ray fluoroscopy or Micro-CT. In a mouse model, the 3D morphology of the radiopaque hydrogels after injection into different target sites was visible using Micro-CT imaging, and their injection volume could be accurately obtained. Furthermore, the subcutaneous degradation process of a radiopaque hydrogel could be non-invasively monitored in a real-time and quantitative manner. In particular, the corrected degradation curve based on Micro-CT imaging well matched with the degradation profile of virgin polymer hydrogel determined by the gravimetric method. These findings indicate that the macromolecular contrast agent has good universality for the construction of various radiopaque polymer hydrogels, and can nondestructively trace and quantify their degradation in vivo. Meanwhile, the present methodology developed by us affords a platform technology for deep tissue imaging of polymeric materials.

Direct current (DC) power transmission systems have received great attention because it can easily integrate many types of renewable energies and have low energy loss in long-distance and large-capacity power transmission for electricity global sharing. Nanoparticles (NPs) have a positive effect on the insulation properties of polymers, but weak interaction between NPs and polymer matrix greatly decreases the effort of NPs on the enhancement of insulation properties, and thereby limits its engineering application. In this work, grafting strategy was used to link the modified NPs and polymer matrix to improve their interactions. Silica NPs (SiO2-NPs) were modified by 3-(methacrylyloxy) propyl-trimethoxysilane (MPS) to introduce highly active groups on the SiO2-NPs surface, followed by the pre-irradiated linear low-density polyethylene (LLDPE) being easily grafted onto the MPS modified SiO2-NPs (MPS-SiO2-NPs) in the melt blending process to obtain LLDPE-g-MPS-SiO2-NPs nanocomposites. Fourier-transform infrared (FT-IR) spectrum and X-ray photoelectron spectroscopy (XPS) confirm the successful incorporation of MPS into SiO2-NPs. Transmission electron microscopy (TEM) verifies that the modified SiO2-NPs exhibits more uniform distribution. The rheology result shows that the interaction between MPS-SiO2-NPs and LLDPE significantly improves. More importantly, the LLDPE-g-MPS-SiO2-NPs nanocomposites displays superior DC breakdown strength to that fabricated by conventional modification methods. When the addition of MPS-SiO2-NPs is 0.1 wt%, the highest DC breakdown strength values of 525 kV/mm and 372 kV/mm are obtained at 30 °C and 70 °C, respectively, and high DC breakdown strength can be well maintained in a wide loading range of NPs.

Detection of in vivo biodegradation is critical for development of next-generation medical devices such as bioresorbable stents or scaffolds (BRSs). In particular, it is urgent to establish a nondestructive approach to examine in vivo degradation of a new-generation coronary stent for interventional treatment based on mammal experiments; otherwise it is not available to semi-quantitatively monitor biodegradation in any clinical trial. Herein, we put forward a semi-quantitative approach to measure degradation of a sirolimus-eluting iron bioresorbable scaffold (IBS) based on optical coherence tomography (OCT) images; this approach was confirmed to be consistent with the present weight-loss measurements, which is, however, a destructive approach. The IBS was fabricated by a metal-polymer composite technique with a polylactide coating on an iron stent. The efficacy as a coronary stent of this new bioresorbable scaffold was compared with that of a permanent metal stent with the name of trade mark Xience, which has been widely used in clinic. The endothelial coverage on IBS was found to be greater than on Xience after implantation in a rabbit model; and our well-designed ultrathin stent exhibited less individual variation. We further examined degradation of the IBSs in both minipig coronary artery and rabbit abdominal aorta models. The present result indicated much faster iron degradation of IBS in the rabbit model than in the porcine model. The semi-quantitative approach to detect biodegradation of IBS and the finding of the species difference might be stimulating for fundamental investigation of biodegradable implants and clinical translation of the next-generation coronary stents.

Background. Acute coronary artery occlusion (CAO) during transcatheter aortic valve replacement (TAVR) is a rare but life-threatening complication during the procedure; there were a few case reports about an anomalous LCX during perioperative period. We report a case of successful coronary protection using the chimney stenting technique in a patient with a severely calcified aortic valve and an anomalous LCX. Case Summary. A 75-year-old man was found an anomalous left circumflex coronary artery (LCX) originating from the right coronary cusp with severely calcified aortic valve stenosis requiring TAVR. When a self-expanding aortic valve was deployed, we found flow compromise in the right coronary system and circumflex to TIMI-0 flow. By using the chimney stenting technique, we rapidly planted 2 stents from the proximal CX branch to the sinotubular junction and the coronary flow was maintained. Conclusion. Chimney stenting protection as a bailout technique is safe and feasible and should be considered in patients deemed to be at high risk of coronary flow compromise, especially with an anomalous LCX.

This paper presents data related to the research article entitled “Effects of cell–cell contact and oxygen tension on chondrogenic differentiation of stem cells” [1]. Three sets of micropatterns were fabricated to study the influence of the cell–cell contact on the chondrogenic induction of mesenchymal stem cells (MSCs). The basic repeat units of these micropatterns were of the same area and microisland number to guarantee the same cell density in each culture well. Cells on these micropatterns experienced the same microenvironment except cell–cell contact extent. Immunofluorescent staining and quantitative real-time polymerase chain reaction (qRT-PCR) were performed, and the data are included here.

OBJECTIVE: This study evaluated the effects of ultrasound combined with the homemade nitric oxide (NO) micro-bubble destruction on the in vitro proliferation, apoptosis, and migration of mesenchymal stem cells (MSCs). Furthermore, we studied whether or not irradiation of the NO micro-bubble combined with bone-marrow derived MSC infusion had a better effect on treating myocardial infarction. The possible mechanism of MSC delivery into the infarcted myocardium was also investigated. METHODS: The murine bone marrow-derived MSCs were isolated, cultured, irradiated, and combined with different concentrations of NO microbubbles. MTT proliferation assay, annexin V-FITC apoptosis detection, migration assay, and RT-PCR were performed 24 h after the irradiation. The NO micro-bubbles was a intravenously injected, followed by the infusion of MSCs, which were labeled by CM-Dil. Myocardium was harvested 48 h later and the distribution of MSCs was observed by laser scanning confocal microscope after frozen sectioning. Echocardiography, histological examination, RT-PCR, and western blotting were performed four weeks after the cell transplantation. RESULTS: Ultrasound combined with 1:70 NO micro-bubbles had no significant impact on the proliferation or apoptosis of MSCs. Transwell chamber findings demonstrated that MSCs migrated more efficiently in group that underwent ultrasound combined with 1:70 NO micro-bubbles. The Real-time PCR results indicated that the expression of CXCR4 was much higher in the group undergoing ultrasound combined with 1:70 NO micro-bubbles. The normalized fluorescence intensity greatly increased in the group of US+NO micro-bubbles and the cardiac function was also markedly improved. Immunohistochemical staining showed that the capillary density was much greater in the group of US+NO micro-bubbles as compared to that of the other groups. RT-PCR and western blotting also revealed a higher SDF-1 and VEGF expression in the group of US+NO micro-bubbles. CONCLUSIONS: NO micro-bubbles could be used in the cell transplantation, which efficiently promoted the MSC homing into the infarcted myocardium.