Search

HL-2M, the satellite tokamak of ITER (International Thermonuclear Experimental Reactor), has successfully completed the first plasma experiment in December 2020 in Southwestern Institute of Physics, China National Nuclear Corporation (CNNC-SWIP). The 500 W/4.5 K helium cryogenic system used in HL-2M is mainly used to cool down the cryopumps and superconducting magnets. The refrigeration system is the heart components of the cryogenic system. The design and development of the refrigeration system witness our significant cooperation with Fullcryo Company. The refrigeration system has completed the factory commissioning and on-site installation at the end of 2019. This paper presents the performance characteristics of the main key equipment in the system.

HL-2M, a new generation of tokamak, has been built continuously in 2020 in Southwestern Institute of Physics, China National Nuclear Corporation, and the first plasma discharge was successfully achieved in 12th, Dec. This tokamak experiment device has high design parameters, and its maximum operating current reaches 3 MA. As a satellite device of ITER, it aims to explore and solve the severe physical and engineering problems. Cryogenic system is an auxiliary system of HL-2M, which mainly meets the stable operation of cryopumps and superconducting magnets. The refrigeration capacity under the condition of Liquid Nitrogen Precooling will up to 500W@4.5K, the liquefaction rate is 160L/h. In this report, we present the main characteristic parameters of the refrigeration system. At present, the system has completed the field assembly, and is expected to start commissioning in June 2021.

Aluminum-ion batteries have garnered significant interest as a potentially safer and cheaper replacement for conventional lithium-ion batteries, offering a shorter charging time and denser storage capacity. Nonetheless, the progress in this field is considerably hampered by the limited availability of suitable cathode materials that can sustain the reversible intercalation of Al

Performing as an important technology, microwave interferometry helps understand and analyze plasma characteristics. However, the relatively appropriate diagnosing methods being discovered for investigating fast time-varying plasma have met with limited success so far. The crucial problem of this task lies in eliminating the interference of additive noise while compensating for phase ambiguity of the initial point and of the phase jump points. In particular, randomly varying electron density and noise make it impossible to directly detect these points. Theoretical analysis has found that the time-varying electron density of plasma causes the received signal to rotate on the complex plane. Inspired by this fact, a deep learning (DL) method is proposed to track the time-varying plasma and solve the above two problems, during which the deep neural network (DNN) is utilized to extract the curve from the data, thereby eliminating the noise and detecting the initial point and the phase jump points according to the projection of the data on the curve. Experimental results suggest that the learned curve is in good consistency with the ground-truth curve. Meanwhile, the time-varying electron density and the collision frequency can be accurately diagnosed using the learned curve.

Laparoscopic hepatectomy is considered a conventional method for treating benign and malignant liver diseases because it is a minimally invasive method. Despite its non-invasive aspect, bleeding and bile leakage occur in liver parenchyma tissue resection during the operation or in the post-operation period, indicating the requirement for high-grade hemostatic devices, such as ultrasonic surgical aspiration, bipolar electrocoagulation, etc. The lack of availability of these high-grade hemostatic devices prevents laparoscopic hepatectomy from becoming a generalized procedure in basic medical organizations. In view of the situation mentioned above, a suite of simple and easy hemostatic devices is developed in this protocol, which includes a harmonic scalpel, monopole electrocoagulation, and a single lumen catheter, to innovatively perform liver parenchyma tissue resection. First of all, the porta hepatis or hepatic pedicle is occluded intermittently by a single lumen catheter, followed by clamping for 15 min and releasing for 5 min. Subsequently, using the harmonic scalpel, clamping and crushing of the liver are done to cut off the hepatic parenchyma tissue and to reveal the intrahepatic arteries, veins, and bile ducts. Lastly, the bleeding spots are coagulated by using monopole electrocoagulation at each spot. Intrahepatic pipeline structures are then visible by using these methods, which could stop bleeding easily, reduce the incidence rate of bile leakage, and improve the safety and feasibility of laparoscopic hepatectomy. Therefore, the simple and easy hemostatic devices shown here are suitable for conducting procedures in primary medical institutions.

The phenomenon of radio blackout due to a plasma sheath during reentry has attracted much attention over the last several decades. However, radio blackout has long puzzled aerospace researchers and has not yet been completely resolved. Owing to the effects of the time-varying plasma sheath channel environment, the constellation of received signals exhibits multiple manifolds, making the traditional algorithms based on Euclidean distance unable to perform demodulation. In the current study, we proposed a novel demodulation method based on spectral clustering for phase-modulated signals interrupted by the plasma sheath channel. Experimental results revealed that as long as the receiving radio waves were above the floor of receiver’s dynamic range, the proposed algorithm effectively classified received signals after time-varying plasma. The parasitic modulation interference caused by time-varying plasma was restrained effectively through the novel algorithm. In contrast to the traditional communication method, the proposed method can be applied to telemetry, track and command, as well as communication between reentry vehicles and near-space hypersonic vehicles in future.

The effects of additives (polyethylene glycol (PEG), sodium dodecyl sulfate (SDS)) and WC nano-powder on the microstructure, relative density, hardness and electrical conductivity of electroplated WC−Cu composite were investigated. The preparation mechanism was also studied. The microstructure of samples was analyzed by XRD, SEM, EDS, TEM and HRTEM. The synergistic effect of PEG and SDS made the WC−Cu composite more compact during the electroplating process. The hardness of WC−Cu composites increased with the increase in WC content, while the electrical conductivity decreased with the increase in WC content. The density of samples tended to increase initially and then decreased with increase in the additive content. When the electroplating solution contained 10 g/L WC nano- powder, 0.2 g/L PEG and 0.1 g/L SDS, the WC−Cu composite exhibited hardness of HV 221 and electric conductivity of 53.7 MS/m. Therefore, the results suggest that WC−Cu composite with excellent properties can be obtained by optimizing the content of additives and WC particles.

A comprehensive study of the phase composition, microstructure evolution, microhardness and wear performance of WC-12Co composite coatings fabricated by laser cladding using coaxial powder-feed mode was presented. It was shown that a combination of high scan speed and high laser energy density made WC on the edge of WC-12Co composite powders partially melt in liquid Co and 304 stainless steel matrix, and then new carbides consisting of lamellar WC and herringbone M3W3C (M=Fe, Co) were formed. Meanwhile, WC-12Co composite coatings with no porosity, cracks and drawbacks like decarburization were obtained, showing high densification and good metallurgical bonding with the substrate. Furthermore, a considerably high microhardness of HV0.3 1500-1600, low coefficient of friction of 0.55 and wear rate of (2.15±0.31)×10-7 mm3/(N·m) were achieved owing to the synergistic effect of excellent metallurgical bonding and fine microstructures of composite coating under laser power of 1500 W.

2D layered MXene (Ti

The sharp field-induced metamagnetic martensitic transformation plays a pivotal role in magnetoresponsive effects for ferromagnetic shape memory alloys (FSMAs). Homogeneous polycrystalline Mn1−xCo1+xGe alloy ribbons are prepared by using the arc-melting and melt-spinning technique in this work. The microstructure, crystalline structure, magnetic and magnetocaloric properties are studied in these ribbons. The substitution of Co for Mn reduces the structural transformation temperature, which leads to the realization of coincident magnetostructural transformation. Strikingly, a magnetic-field-induced martensitic transformation is observed in these ribbons. Therefore, large magnetocaloric effect, including maximum magnetic entropy change (ΔSM,max) value of ∼28 and 25 Jkg−1K−1 and effective refrigeration capacity (RCeff) of ∼168 and 181 Jkg−1 are obtained for x = 0.035 and 0.09 samples, respectively, under the field change of μ 0 Δ H = 0 – 7 T . Furthermore, the average hysteresis loss of these ribbons reduces largely in contrast to their bulk counterparts. These results would provide the new experimental data for magnetic refrigerant materials and pave the way for the further investigation of other FSMAs.

As an important basic material of electronic equipment, copper (Cu) foils should have a small thickness, good mechanical properties, and excellent thermal conductivity. However, preparing an ultrathin Cu foil with good properties remains challenging. Herein, we report an electroless deposition (ELD) strategy for the facile and scalable preparation of an ultrathin freestanding nickel-coated graphene (NCG)/Cu composite foil in a short time of 25 min. The NCG can significantly improve the mechanical and physical properties of composite foils. Experimental results reveal that the NCG/Cu composite foil manifests the best performance when the NCG concentration in an ELD bath was 30 mg/L. The composite foil evidenced a thickness of 1.1 μm, a high tensile strength of 338.7 MPa, and a high thermal conductivity of 431.2 W/mK. Compared with the pure Cu foil, both bending times and elastic modulus are increased by 298.1 and 737.3%, respectively. Remarkably, the composite foil has excellent heat dissipation performance, showing enormous potential as a heat sink material. This work proposes a new method for manufacturing the ultrathin graphene-reinforced Cu composite foil with high performance for numerous applications.

Tungsten-copper (W–Cu) composites are widely used as electrical contact materials, resistance welding, electrical discharge machining (EDM), and plasma electrode materials due to their excellent arc erosion resistance, fusion welding resistance, high strength, and superior hardness. However, the traditional preparation methods pay little attention to the compactness and microstructural uniformity of W–Cu composites. Herein, W–Cu composite coatings are prepared by pulse electroplating using nano-W powder as raw material and the influence of forward-reverse duty cycle of pulse current on the structure and mechanical properties is systematically investigated. Moreover, the densification mechanism of the W–Cu composite coating is analyzed from the viewpoints of forward-pulse plating and reverse-pulse plating. At the current density (J) of 2 A/dm2, frequency (f) of 1500 Hz, forward duty cycle (df) of 40% and reverse duty cycle (dr) of 10%, the W–Cu composite coating rendered a uniform microstructure and compact structure, resulting in a hardness of 127 HV and electrical conductivity of 53.7 MS/m.

In this paper, we investigate the blind channel estimation problem for MIMO systems under Rayleigh fading channel. Conventional MIMO communication techniques require transmitting a considerable amount of training symbols as pilots in each data block to obtain the channel state information (CSI) such that the transmitted signals can be successfully recovered. However, the pilot overhead and contamination become a bottleneck for the practical application of MIMO systems with the increase of the number of antennas. To overcome this obstacle, we propose a blind channel estimation framework, where we introduce an auxiliary posterior distribution of CSI and the transmitted signals given the received signals to derive a lower bound to the intractable likelihood function of the received signal. Meanwhile, we generate this auxiliary distribution by a neural network based variational inference framework, which is trained by maximizing the lower bound. The optimal auxiliary distribution which approaches real prior distribution is then leveraged to obtain the maximum a posterior (MAP) estimation of channel matrix and transmitted data. The simulation results demonstrate that the performance of the proposed blind channel estimation method closely approaches that of the conventional pilot-aided methods in terms of the channel estimation error and symbol error rate (SER) of the detected signals even without the help of pilots.

Acute myeloid leukemia (AML) is a fatal disease characterized by the accumulation of immature myeloid blasts in the bone marrow (BM). Cytokine provide signals for leukemia cells to improve their survival in the BM microenvironment. Previously, we identified interleukin-33 (IL-33) as a promoter of cell survival in a human AML cell line and primary mouse leukemia cells. In this study, we report that the cell surface expression of IL-33–specific receptor, Interleukin 1 Receptor Like 1 (IL1RL1), is elevated in BM cells from AML patients at diagnosis, and the serum level of IL-33 in AML patients is higher than that of healthy donor controls. Moreover, IL-33 levels are found to be positively associated with IL-6 levels in pediatric patients with AML. In vitro, IL-33 treatment increased IL-6 mRNA expression and protein level in BM and peripheral blood (PB) cells from AML patients. Evidence was also provided that IL-33 inhibits cell apoptosis by activating p38 mitogen-activated protein kinase (MAPK) pathway using human AML cell line and AML patient samples. Finally, we confirmed that IL-33 activated IL-6 expression in a manner that required p38 MAPK pathway using clinical AML samples. Taken together, we identified a potential mechanism of IL-33–mediated survival involving p38 MAPK in pediatric AML patients that would facilitate future drug development.

In the present study, high-purity ternary-phase nitride (Ti2AlN) powders were synthesized through microwave sintering using TiH2, Al, and TiN powders as raw materials. X-ray diffraction (XRD), differential scanning calorimetry (DSC), transmission electron microscopy (TEM), and scanning electron microscopy (SEM) were adopted to characterize the as-prepared powders. It was found that the Ti2AlN powder prepared by the microwave sintering of the 1TiH2/1.15Al/1TiN mixture at 1250 °C for 30 min manifested great purity (96.68%) with uniform grain size distribution. The formation mechanism of Ti2AlN occurred in four stages. The solid-phase reaction of Ti/Al and Ti/TiN took place below the melting point of aluminum and formed Ti2Al and TiN0.5 phases, which were the main intermediates in Ti2AlN formation. Therefore, the present work puts forward a favorable method for the preparation of high-purity Ti2AlN powders.

The 500 W/4.5 K helium cryogenic system of the HL-2M Tokamak experimental device of Southwestern Institute of Physics, China National Nuclear Corporation (CNNC-SWIP) is mainly used to cool down the extraction cryopump of diverter and the condensate cryopump of neutral beam injection. The refrigeration system is one of the main components of the cryogenic system. It has been designed and developed in collaboration with the domestic Fullcryo company. This system has been completed the factory commissioning at the end of last year in 2019. This paper presents the performance characteristics of the main key equipment in the refrigeration system.

Electroless deposition (ELD) is a process widely used for the production of thin metal films, but stripping the films from the substrate remains challenging. Here, we report a low-cost ELD method for the large-scale production of freestanding copper (Cu) foils in a short time of 25-55 min. By atomizing a thin (

During the reentry process, the plasma sheath covering the surface of the hypersonic aircraft will cause the amplitude attenuation and phase jitter of the communication electromagnetic waves. Channel parameters such as the electron density and collision frequency of the plasma sheath reflect the changing trend of the plasma sheath, and these parameters can be measured by physical means. However, these parameters cannot directly reflect the change of the channel communication ability and cannot directly serve the design of communication methods in the plasma sheath. Due to the particularity of the plasma sheath, the traditional channel estimation method for Additive White Gaussian Noise channels will no longer be applicable. This paper presents a channel capacity estimation method for dynamic plasma sheath. First, the plasma sheath is equivalent to a discrete input continuous output memoryless channel, and then the channel capacity expression is derived according to Shannon formula. Finally, the channel capacity of the dynamic plasma sheath is estimated by calculating the transition probability density function. The simulation results show that the channel capacity of the dynamic plasma sheath is affected by both the signal-to-noise ratio (SNR) and the dynamic parameters of the plasma sheath. When the electron density is small, the channel capacity is mainly affected by the SNR. As the electron density increases, the dynamic parameters of the plasma sheath gradually become the main factor affecting the channel capacity. This method is a theoretical analysis of the channel capacity when the channel parameters of the plasma channel are known, and it is meaningful for conducting the work of communication methods design.

2D layered MXene (Ti3C2Tx) with high conductivity and pseudo-capacitance properties presents great application potential with regard to electrode materials for supercapacitors. However, the self-restacking and agglomeration phenomenon between Ti3C2Tx layers retards ion transfer and limits electrochemical performance improvement. In this study, a 3D porous structure of Ti3C2Tx was obtained by adding alkali to a Ti3C2Tx colloid, which was followed by flocculation. Alkaline-induced flocculation is simple and effective, can be completed within minutes, and provides 3D porous networks. As 3D porous network structures present larger surface areas and more active sites, ions transfer accelerates, which is crucial with regard to the improvement of the superior capacitance and rate performance of electrodes. The sample processed with KOH (K-a-Ti3C2Tx) exhibited a high capacity of approximately 300.2 F g−1 at the current density of 1 A g−1. The capacitance of the samples treated with NaOH and LiOH is low. In addition, annealing is essential to further improve the capacitive performance of Ti3C2Tx. After annealing at 400 °C for 2 h in a vacuum tube furnace, the sample treated with KOH (K-A-Ti3C2Tx) exhibited an excellent specific capacitance of approximately 400.7 F g−1 at a current density of 1 A g−1, which is considerably higher than that of pristine Ti3C2Tx (228.2 F g−1). Furthermore, after 5000 charge–discharge cycles, the capacitance retention rate reached 89%. This result can be attributed to annealing, which can further remove unfavourable surface groups, such as –F or –Cl, and then improve conductivity capacitance and rate performance. This study can provide an effective approach to the preparation of high-performance supercapacitor electrode materials.

An effective preparing approach of graphene-strengthening copper-based composites by a easy electrochemical deposition and atmosphere sintering is presented. The graphene-nanoplatelets/copper (GNP/Cu) powder shows homogenous dispersion of graphene in the matrix when the addition of graphene oxide (GO) is 25.0 mg/ml in the electrochemical deposited solution. The formation of the Ni decorating graphene nanoplatelets (Ni-GNP) and the oxygen-mediated Cu O C bond are promoted by electrochemical deposition. The crystal orientation relationship of ( 1 ¯ 1 1 ¯ ) C u / / ( 10 1 ¯ 0 ) G r a p h e n e and ( 222 ) N i / / ( 10 1 ¯ 0 ) G r a p h e n e is observed, and the lattice misfit ɛ* of Cu and graphene is 2.1%. The bond strength between copper and graphene is increased by Ni-GNPs, Cu O C and the coherent crystal orientation relationship. Taking advantage of the GNP/Cu powders prepared by electrochemical deposition, the GNP/Cu composites with the hardness of 111.2 HV and the conductivity of 89.2% IACS are prepared.

The 500 W@4.5 K helium refrigeration system operated in HL-2M Tokamak is the first domestically made cryogenic system independently designed and manufactured in China. It is expected to cool down HL-2M cryousers for the first time around June 2021. In the requirement document of helium refrigeration system, the mean time between failures (MTTF) should be at least 8000 hours, and the inherent availability of the subsystem should be 60%. This paper presents the RAMI (Reliability, Availability, Maintainability and Inspectability) analysis of the failure modes of the HL-2M helium refrigeration system as well as the corresponding effects and criticality to guide the design of the components and the preparation for operation and maintenance. The description of the risk mitigation actions regarding the design, testing, maintenance and operation in order to reach the expected targets of enhancing the reliability and availability of the refrigeration system.

In this study, we demonstrate the effects of surfactants on the morphology of Nb2C MXene-derived ferroelectric KNbO3 crystals. We synthesized plate-like KNbO3 crystals using Nb2C MXene and KOH as niobium and potassium sources, respectively, and sodium dodecyl sulfate as the surfactant. In addition, we conducted the same hydrothermal process for Nb2C MXene and KOH as niobium and potassium sources, respectively, and benzyltriethylammonium chloride as a surfactant; we found that the final product exhibits bulk morphology. We show that the morphology of MXene-derived KNbO3 crystals is strongly related to the interaction between the MXene flakes and the functional groups of the surfactant during the hydrothermal process.

For the improvement of the properties of cemented carbides, ultra-fine spherical cobalt powders as binder were prepared using calcium cobaltite. The effects of the ratio of CaO to CoO, the calcination temperature and the reduction temperature on particle size and morphology of cobalt powders were studied. The results show that the average particle size of cobalt powders decreases with increasing the weight ratio of CaO to CoO, but increases with the calcination temperature and reduction temperature. The spherical cobalt powders with the mean particle size of 84 nm are obtained when the weight ratio of CaO to CoO is 7:4 and the calcination temperature and reduction temperature are 1000 °C and 700 °C, respectively. In addition, CaO regarded as the blocking agent can refine cobalt powders during the hydrogen reduction process.

Compact spherical WC-12Co composite powder was deposited on 304 stainless steel substrate by multi-layer laser powder deposition (LPD) to fabricate cemented carbide coating. The phase constitution and microstructure of the coating as well as the feedstock powder were characterized. Microhardness and dry sliding wear tests were also performed to assess the mechanical properties of the coating. The results showed that the coating exhibited distinct microstructures and phase constitutions at different depths due to the various thermal cycles and the resulting heat damages of feedstock powders. The upper region of the coating (i.e. the wear resistant layer) exhibited bimodal microstructure in which the incompletely dissolved WC-Co composite particles preserved the original submicron sintered structure and secondary carbides were precipitated around them. Owing to the fine-grained strengthening of submicron WC grains in the undissolved areas, the microhardness of wear resistant layer was enhanced to 8 times that of the substrate. The wear rate of the cemented carbide coating was about three orders of magnitude lower than that of the substrate when dry sliding against Al2O3 ball under 10 N normal load. The bimodal structure of the wear resistant layer and the synergistic enhancement of differently sized carbides are the key factors for the excellent wear resistance of the coating.

A novel nano-WC/Cu-based composite with nanometer WC dispersed in the copper matrix was successfully prepared by vacuum hot-pressing sintering. The effects of different hot-pressing sintering temperatures on the microstructure, conductivity, strength, and hardness of the composite were investigated. As a result, with the increase of temperature, the distribution of nano-WC particles in the matrix is more even, and the relative density can reach about 100% when sintering temperature increase to 1075 °C. The electrical conductivity of the composites sharply increases from 62.5 to 90%IACS when sintering temperature increase from 950 °C to 1100 °C. Furthermore, as the sintering temperature rises from 950 °C to 1100 °C, the ultimate tensile strength gradually increases from 123 to 425 Mpa, and the hardness increases from 127.5 to 150 HV. In addition, the composite also displayed excellent resistance to high temperature softening at 800 °C.

In the present study, high-purity ternary-phase nitride (Ti2AlN) powders were synthesized through microwave sintering using TiH2, Al, and TiN powders as raw materials. X-ray diffraction (XRD), differential scanning calorimetry (DSC), transmission electron microscopy (TEM), and scanning electron microscopy (SEM) were adopted to characterize the as-prepared powders. It was found that the Ti2AlN powder prepared by the microwave sintering of the 1TiH2/1.15Al/1TiN mixture at 1250 &deg, C for 30 min manifested great purity (96.68%) with uniform grain size distribution. The formation mechanism of Ti2AlN occurred in four stages. The solid-phase reaction of Ti/Al and Ti/TiN took place below the melting point of aluminum and formed Ti2Al and TiN0.5 phases, which were the main intermediates in Ti2AlN formation. Therefore, the present work puts forward a favorable method for the preparation of high-purity Ti2AlN powders.