Search

Congo Tak-Shing Ching,1,2 Kok-Khun Yong,3 Yan-Dong Yao,4 Huan-Ting Shen,3 Shiu-Man Hsieh,5 Deng-Yun Jheng,1 Tai-Ping Sun,1,6 Hsiu-Li Shieh11Department of Electrical Engineering, National Chi Nan University, Nantou, 2Department of Photonics and Communication Engineering, Asia University, Taichung, 3Department of Internal Medicine, Puli Christian Hospital, Nantou, People’s Republic of China; 4Division of Science and Technology, Hong Kong Community College, Hong Kong; 5Department of Orthopedic Surgery, Puli Christian Hospital, 6Department of Electronic Engineering, Nan Kai University of Technology, Nantou, People’s Republic of ChinaAbstract: The aims of this study were to investigate the most effective combination of physical forces from laser, electroporation, and reverse iontophoresis for noninvasive transdermal extraction of uric acid, and to develop a highly sensitive uric acid biosensor (UAB) for quantifying the uric acid extracted. It is believed that the combination of these physical forces has additional benefits for extraction of molecules other than uric acid from human skin. A diffusion cell with porcine skin was used to investigate the most effective combination of these physical forces. UABs coated with ZnO2 nanoparticles and constructed in an array configuration were developed in this study. The results showed that a combination of laser (0.7 W), electroporation (100 V/cm2), and reverse iontophoresis (0.5 mA/cm2) was the most effective and significantly enhanced transdermal extraction of uric acid. A custom-designed UAB coated with ZnO2 nanoparticles and constructed in a 1×3 array configuration (UAB-1×3-ZnO2) demonstrated enough sensitivity (9.4 µA/mM) for quantifying uric acid extracted by the combined physical forces of laser, electroporation, and RI. A good linear relationship (R2=0.894) was demonstrated to exist between the concentration of uric acid (0.2–0.8 mM) inside the diffusion cell and the current response of the UAB-1×3-ZnO2. In conclusion, a new approach to noninvasive transdermal extraction and quantification of uric acid has been established.Keywords: laser, electroporation, reverse iontophoresis, noninvasive, uric acid, biosensor

A technique using Linnik-based optical coherence microscopy (OCM), with built-in fluorescence microscopy (FM), is demonstrated here to describe cellular-level morphology for fresh porcine and biobank tissue specimens. The proposed method utilizes color-coding to generate digital pseudo-H&E (p-H&E) images. Using the same camera, colocalized FM images are merged with corresponding morphological OCM images using a 24-bit RGB composition process to generate position-matched p-H&E images. From receipt of dissected fresh tissue piece to generation of stitched images, the total processing time is <15 min for a 1-cm 2 specimen, which is on average two times faster than frozen-section H&E process for fatty or water-rich fresh tissue specimens. This technique was successfully used to scan human and animal fresh tissue pieces, demonstrating its applicability for both biobank and veterinary purposes. We provide an in-depth comparison between p-H&E and human frozen-section H&E images acquired from the same metastatic sentinel lymph node slice (∼10 µm thick), and show the differences, like elastic fibers of a tiny blood vessel and cytoplasm of tumor cells. This optical sectioning technique provides histopathologists with a convenient assessment method that outputs large-field H&E-like images of fresh tissue pieces without requiring any physical embedment., Competing Interests: The authors declare no conflicts of interest related to this article., (© 2021 Optical Society of America under the terms of the OSA Open Access Publishing Agreement.)

Efficient glass-clad crystal fiber (CF) lasers were demonstrated using a Ti:sapphire crystalline core as the gain medium. With a core diameter of 18 μm, the laser diode (LD) pump source can be effectively coupled and guided throughout the crystal fiber for a low threshold and high slope efficiency laser operation. The advantage of high heat dissipation efficiency of the fiber structure can be derived from the low core temperature rising measurement (i.e., 17 K/W) with passive cooling. At an output transmittance of 23%, the lowest absorbed threshold of 118.2 mW and highest slope efficiency of 29.6% were achieved, with linear laser polarization.

High-brightness near-infrared broadband amplified spontaneous emission (ASE) was generated by glass-clad Ti:sapphire crystal fibers, which were developed using the co-drawing laser-heated pedestal growth method. As much as 29.2 mW of ASE power was generated using 520 nm laser diodes as the excitation source on an a-cut, 18 μm core-diameter Ti:sapphire crystal fiber (CF). The 3 dB bandwidth was 163.8 nm, and the radiance was 53.94  W·mm(-2) sr(-1). The propagation loss of the glass-clad sapphire CF measured using the cutback method was 0.017  cm(-1) at 780 nm. For single-mode applications, more than 100 μW of power was coupled into a SM600 single-mode fiber.

A significant advancement of cw lasing in Cr4+:Y3Al5O12 (Cr4+:YAG) double-clad crystal fiber grown by the codrawing laser-heated pedestal growth technique was demonstrated at RT. The optical-to-optical slope efficiency of 33.9% is the highest, to the best of our knowledge, among all Cr4+:YAG lasers, whether they are in bulk or fiber forms. The low-threshold lasing of 78.2 mW and high efficiency are in good agreement with the simulation. The keys to the high laser efficiency are twofold: one is the improved Cr4+ emission cross section and fluorescence lifetime due to release of the strain on the distorted Cr4+ tetrahedron, which also mitigates photobleaching in Cr4+:YAG; the other is the improved core uniformity at long fiber lengths. In addition, because of the low threshold, the impact of excited state absorption of the pump light is significantly reduced. The effects of crystal-orientation, self-selected, and pump-dependent linear polarization states were also addressed.

A Ce(3+):YAG double-clad crystal fiber (DCF) visible emission was used as the light source for optical coherence tomography (OCT). The visible emission was produced from a 10 microm core DCF pumped by a diode laser. The broadband emission and short central wavelength of this light source enabled the realization of 1.5 microm axial resolution in air. The relatively clean spectrum reduced the side lobe of its point-spread function, and therefore facilitated the generation of a high-quality image with less crosstalk between adjacent image pixels. As a demonstration, an Aplocheilus lineatus goldfish was experimented on to map out the stroma of its cornea. This visible-light-based OCT can be utilized for industrial inspection as well as ocular applications.

Cr4+:YAG double-clad crystal fiber with an uniform 10-microm core was fabricated by using a sapphire tube as a heat capacitor to stabilize the power fluctuation of the CO2 laser in the co-drawing laser-heated pedestal growth system. The uniformity of the fiber core showed a factor of 3 improvement compared to that without the use of sapphire tube. The variation of the core diameter is within the +/-1.35-degree adiabatic criterion and has a autocorrelation length of 1.7 mm. The measured propagation loss is only 0.02 dB/cm. The sapphire tube also reduces the vertical temperature gradient during the crystal fiber growth process so the 10-microm crystal core exhibits a smooth perimeter. The sapphire tube assisted system can be applied to the growth of many other optical crystal materials.