Search

The anomalous Hall effect (AHE), a hallmark of time-reversal symmetry breaking, has been reported in rutile RuO2, a debated metallic altermagnetic candidate. Previously, AHE in RuO2 was observed only in strain-relaxed thick films under extremely high magnetic fields (~50 T). Yet, in ultrathin strained films with distinctive anisotropic electronic structures, there are no reports, likely due to disorder and defects suppressing metallicity thus hindering its detection. Here, we demonstrate that ultrathin, fully-strained 2 nm TiO2/t nm RuO2/TiO2 (110) heterostructures, grown by hybrid molecular beam epitaxy, retain metallicity and exhibit a sizeable AHE at a significantly lower magnetic field (< 9 T). Density functional theory calculations reveal that epitaxial strain stabilizes a non-compensated magnetic ground state and reconfigures magnetic ordering in RuO2 (110) thin films. These findings establish ultrathin RuO2 as a platform for strain-engineered magnetism and underscore the transformative potential of epitaxial design in advancing spintronic technologies., Comment: 23 pages

Crystal symmetry plays an important role in the Hall effects. Unconventional spin Hall effect (USHE), characterized by Dresselhaus and out-of-plane spins, has been observed in materials with low crystal symmetry. Recently, antisymmetric planar Hall effect (APHE) was discovered in rutile RuO$_2$ and IrO$_2$ (101) thin films, which also exhibit low crystal symmetry. However, the correlation between USHE and APHE remains largely unexplored. In this study, we report the observation of both USHE and APHE in IrO$_2$ (111) films, using spin-torque ferromagnetic resonance (ST-FMR) and harmonic Hall measurements, respectively. Notably, the unconventional spin torque efficiency from Dresselhaus spin was more than double that of a previous report. Additionally, the temperature dependence of APHE suggests that it arises from the Lorentz force, constrained by crystal symmetry. Symmetry analysis confirms the coexistence of USHE and APHE in IrO$_2$ (111), paving the way for a deeper understanding of Hall effects and related physical phenomena.

The research aims to expand tactile feedback beyond vibrations to various modes of stimuli, such as indentation, vibration, among others. By incorporating soft material into the design of a novel tactile actuator, we can achieve multi-modality and enhance the device's wearability, which encompasses compliance, safety, and portability. The proposed tactile device can elevate the presence and immersion in VR by enabling diverse haptic feedback such as, force indentation, vibration and other arbitrary force outputs. This approach enables the rendering of haptic interactions with virtual objects, such as grasping of aa 3D virtual object to feel its stiffness - action that was difficult to achieve using widely adopted vibrotactile motors., Comment: Part of proceedings of 6th International Conference AsiaHaptics 2024

Magnetic anisotropy in atomically thin correlated heterostructures is essential for exploring quantum magnetic phases for next-generation spintronics. Whereas previous studies have mostly focused on van der Waals systems, here, we investigate the impact of dimensionality of epitaxially-grown correlated oxides down to the monolayer limit on structural, magnetic, and orbital anisotropies. By designing oxide superlattices with a correlated ferromagnetic SrRuO3 and nonmagnetic SrTiO3 layers, we observed modulated ferromagnetic behavior with the change of the SrRuO3 thickness. Especially, for three-unit-cell-thick layers, we observe a significant 1,500% improvement of coercive field in the anomalous Hall effect, which cannot be solely attributed to the dimensional crossover in ferromagnetism. The atomic-scale heterostructures further reveal the systematic modulation of anisotropy for the lattice structure and orbital hybridization, explaining the enhanced magnetic anisotropy. Our findings provide valuable insights into engineering the anisotropic hybridization of synthetic magnetic crystals, offering a tunable spin order for various applications., Comment: 23 pages

Altermagnetism refers to a wide class of compensated magnetic orders featuring magnetic sublattices with opposite spins related by rotational symmetry rather than inversion or translational operations, resulting in non-trivial spin splitting and high-order multipolar orders. Here, by combining theoretical analysis, electrical transport, X-ray and optical spectroscopies, and nonlinear optical measurements, we establish a phase diagram in hybrid molecular beam epitaxy-grown RuO2/TiO2 (110) films, mapping the broken symmetries along the altermagnetic/electronic/structural phase transitions as functions of film thickness and temperature. This phase diagram features a novel altermagnetic metallic polar phase in strained 2 nm samples, extending the concept of multiferroics to altermagnetic systems. These results provide a comprehensive understanding of altermagnetism upon epitaxial heterostructure design for emergent novel phases with multifunctionalities., Comment: 15 pages

4d transition metal perovskite oxides serve as suitable testbeds for the study of strongly correlated metallic properties. Among these, $SrMoO_{3}$ (SMO) exhibits remarkable electrical conductivity at room temperature. The temperature-dependent resistivity $(\rho(T))$ exhibits a Fermi-liquid behavior below the transition temperature $T^{*}$, reflecting the dominant electron-electron interaction. Above $T^{*}$, electron-phonon interaction becomes more appreciable. In this study, we employed the power-law scaling of $\rho(T)$ to rigorously determine the $T^{*}$. We further demonstrate that the $T^{*}$ can be modified substantially by ~40 K in epitaxial thin films. It turns out that the structural quality determines $T^{*}$. Whereas the plasma frequency could be tuned by the change in the electron-electron interaction via the effective mass enhancement, we show that the plasmonic properties are more directly governed by the electron-impurity scattering. The facile control of the electron scattering mechanism through structural quality modulation can be useful for plasmonic sensing applications in the visible region.

Unexpected, yet useful functionalities emerge when two or more materials merge coherently. Artificial oxide superlattices realize atomic and crystal structures that are not available in nature, thus providing controllable correlated quantum phenomena. This review focuses on 4d and 5d oxide superlattices, in which the spin-orbit coupling plays a significant role compared with conventional 3d oxide superlattices. Modulations in crystal structures with octahedral distortion, phonon engineering, electronic structures, spin orderings, and dimensionality control are discussed for 4d oxide superlattices. Atomic and magnetic structures, Jeff = 1/2 pseudospin and charge fluctuations, and the integration of topology and correlation are discussed for 5d oxide superlattices. This review provides insights into how correlated quantum phenomena arise from the deliberate design of superlattice structures that give birth to novel functionalities., Comment: 68 pages

Epitaxially grown RuO2 films on TiO2 (110) exhibit significant in-plane strain anisotropy, with a compressive strain of - 4.7% along the [001] crystalline direction and a tensile strain of +2.3% along [1-10]. As the film thickness increases, anisotropic strain relaxation is expected. By fabricating Hall bar devices with current channels along two in-plane directions <001> and <1-10>, we revealed anisotropic in-plane transport in RuO2/TiO2 (110) films grown via solid-source metal-organic molecular beam epitaxy approach. For film thicknesses (t_film) < 3.6 nm, the resistivity along <001> exceeds that along <1-10> direction at all temperatures. With further decrease in film thicknesses, we uncover a transition from metallic to insulating behavior at t_film <2.1 nm. Our combined temperature- and magnetic field-dependent electrical transport measurements reveal that this transition from metallic to insulating behavior is driven by electron-electron interactions., Comment: 15 pages

Chirality, a fundamental concept from biological molecules to advanced materials, is prevalent in nature. Yet, its intricate behavior in specific topological systems remains poorly understood. Here, we investigate the emergence of hidden chiral domain wall states using a double-chain Su-Schrieffer-Heeger model with interchain coupling specifically designed to break chiral symmetry. Our phase diagram reveals single-gap and double-gap phases based on electronic structure, where transitions occur without topological phase changes. In the single-gap phase, we reproduce chiral domain wall states, akin to chiral solitons in the double-chain model, where chirality is encoded in the spectrum and topological charge pumping. In the double-gap phase, we identify hidden chiral domain wall states exhibiting opposite chirality to the domain wall states in the single-gap phase, where the opposite chirality is confirmed through spectrum inversion and charge pumping as the corresponding domain wall slowly moves. By engineering gap structures, we demonstrate control over hidden chiral domain states. Our findings open avenues to investigate novel topological systems with broken chiral symmetry and potential applications in diverse systems.

The magnetic anisotropy of low-dimensional Mott systems exhibits unexpected magnetotransport behavior useful for spin-based quantum electronics. Yet, the anisotropy of natural materials is inherently determined by the crystal structure, highly limiting its engineering. We demonstrate the magnetic anisotropy modulation near a digitized dimensional Mott boundary in artificial superlattices composed of a correlated magnetic monolayer SrRuO3 and nonmagnetic SrTiO3. The magnetic anisotropy is initially engineered by modulating the interlayer coupling strength between the magnetic monolayers. Interestingly, when the interlayer coupling strength is maximized, a nearly degenerate state is realized, in which the anisotropic magnetotransport is strongly influenced by both the thermal and magnetic energy scales. Our results offer a new digitized control for magnetic anisotropy in low-dimensional Mott systems, inspiring promising integration of Mottronics and spintronics., Comment: 30 pages

Atomic-scale precision epitaxy of perovskite oxide superlattices provides unique opportunities for controlling the correlated electronic structures, activating effective control knobs for intriguing functionalities including electromagnetic, thermoelectric, and electrocatalytic behaviors. In this study, we investigated the close interplay between the atomic and electronic structures of correlated superlattices synthesized by atomic-scale precision epitaxy. In particular, we employ superlattices composed of correlated magnetic SrRuO3 (SRO) and quantum paraelectric SrTiO3 (STO) layers. In those superlattices, RuO6 octahedral distortion is systematically controlled from 167 to 175 degrees depending on the thickness of the STO layers, also affecting the TiO6 octahedral distortion within the STO layer. Customized octahedral distortion within SRO/STO superlattices in turn modifies the electronic structures of both the Ti and Ru compounds, observed by X-ray absorption spectroscopy. Our results identify the close correlation between atomic lattice and electronic structures enabled by the facile controllability of atomic-scale epitaxy, which would be useful for designing future correlated oxide devices., Comment: 14 pages

Atomic-scale precision control of magnetic interactions facilitates a synthetic spin order useful for spintronics, including advanced memory and quantum logic devices. Conventional modulation of synthetic spin order has been limited to metallic heterostructures that exploit RKKY interaction through a nonmagnetic metallic spacer; however, they face problems arising from Joule heating and/or electric breakdown. The practical realization and observation of a synthetic spin order across a nonmagnetic insulating spacer would lead to the development of spin-related devices with a completely different concept. Herein, we report the atomic-scale modulation of the synthetic spiral spin order in oxide superlattices composed of ferromagnetic metal and nonmagnetic insulator layers. The atomically controlled superlattice exhibit an oscillatory magnetic behavior, representing the existence of a spiral spin structure. Depth-sensitive polarized neutron reflectometry evidences modulated spiral spin structures as a function of the nonmagnetic insulator layer thickness. Atomic-scale customization of the spin state could lead the field one step further to actual spintronic applications., Comment: 18 pages

Engineering of phonons, i.e., collective lattice vibrations in crystals, is essential for manipulating physical properties of materials such as thermal transport, electron-phonon interaction, confinement of lattice vibration, and optical polarization. Most approaches to phonon-engineering have been largely limited to the high-quality heterostructures of typical semiconductors. Yet, artificial engineering of phonons in a variety of materials with functional properties, such as complex oxides, will yield unprecedented applications of coherent tunable phonons in future quantum acoustic devices. In this study, we demonstrate artificial engineering of phonons in the atomic-scale SrRuO3/SrTiO3 superlattices, wherein tunable phonon modes were observed via confocal Raman spectroscopy. In particular, the coherent superlattices led to the backfolding of acoustic phonon dispersion, resulting in zone-folded acoustic phonons in the THz frequency domain. We could further fine-tune the frequencies from 1 to 2 THz via atomic-scale precision thickness control. In addition, we observed a polar optical phonon originating from the local inversion symmetry breaking in the artificial oxide superlattices, exhibiting emergent functionality. Our approach of atomic-scale heterostructuring of complex oxides will vastly expand material systems for quantum acoustic devices, especially with the viability of functionality integration., Comment: 23 pages

Chiral symmetry breaking of phonons plays an essential role in emergent quantum phenomena owing to its strong coupling to spin degree of freedom. However, direct experimental evidence of the chiral phonon-spin coupling is lacking. In this study, we report a chiral phonon-mediated interlayer exchange interaction in atomically controlled ferromagnetic metal (SrRuO3)-nonmagnetic insulator (SrTiO3) heterostructures. Owing to the unconventional interlayer exchange interaction, we have observed rotation of magnetic moments as a function of nonmagnetic insulating spacer thickness, resulting in a spin spiral state. The chiral phonon-spin coupling is further confirmed by phonon Zeeman effects. The existence of the chiral phonons and their interplay with spins along with our atomic-scale heterostructure approach open a window to unveil the crucial roles of chiral phonons in magnetic materials., Comment: 40 pages