Search

Aggregate breakage in unbound pavement layers can lead to pavement distresses that affect their functionality and service life. Thus understanding the mechanics and clarifying the factors affecting materials breakage resistance are important for ensuring adequate performance of these layers. In this study, aggregate breakage in unbound granular materials (UGM) is investigated experimentally and numerically. Experimentally, aggregate breakage under uniaxial compression is examined for two UGMs prepared with the same aggregate type but different gradations. To capture the experimentally observed influence of gradation and load magnitude on aggregate breakage, a Discrete Element Method (DEM) model was developed, based on granular mechanics particle contact and failure laws. A simple procedure to identify the contact and failure law parameters from experiments is proposed. With those parameters, the model’s capability of capturing the effect of gradation and loading on the aggregate breakage in UGM is evaluated. Based on comparison with experimental findings, it is shown that the model can capture macro-scale properties of UGM, such as its deformation response under uniaxial compression, as well as the amount of aggregate breakage in the material., Validerad;2024;Nivå 2;2024-03-28 (signyg);Full text license: CC BY

The phenomenon of hydroplaning poses a risk when landing an aircraft on a wet runway. This study developed a finite element (FE) framework comprising a dual-tyre model, water film models, a runway model, and an interaction model to investigate wet runway landings. The dual-tyre model was created with a geometric description and material properties. Water film models for even and uneven water depths were constructed based on a coupled Eulerian-Lagrangian algorithm. The runway model was obtained through surface scanning and 3D reconstruction. The interaction model was calculated using the power spectrum density and viscoelastic property of rubber. Based on the FE approach, the effect of the slip ratio on the hydroplaning phenomenon was discussed. The results indicated that hydroplaning speed generally increases with the slip ratio. Furthermore, single- and dual-tyre wet runway landings with an even water film depth were simulated, and the results revealed similar accuracy between the two landing types. Next, the study of dual-tyre landings indicated that landings in varying depths of water face the risks of hydroplaning and veering off simultaneously. The FE approach was further used to analyse dual-tyre landings on runways with a yaw angle., QC 20231002

Interlayers in asphalt pavements are potential structural damage initiators. In order to better understand the quantitative role of interlayer parameters, such as surface roughness, binder type, binder content and loading type on interlayer shear strength, this paper focuses on the effects of particle interlock and contact conditions on interlayer strength through experimental and numerical modelling. Experimentally, interlayer shear box strength tests on a model material consisting of stiff binder blended with steel balls are performed with and without normal force confinement. A Discrete Element method model of the test is developed using measurements of the model material for calibrating the contact law and for validating the model. It is shown that this model captures adequately the measured force-displacement response of the specimens. It is thus a feasible starting point for numerically and experimentally studying the role of binder and tack coat regarding interlayer shear strength of real asphalt layers., Validerad;2023;Nivå 2;2023-07-17 (sofila)