Search

Transplantation of functional islets encapsulated in stable biomaterials has the potential to cure Type I diabetes. However, the success of these materials requires the ability to quantitatively evaluate their stability. Imaging techniques that enable monitoring of biomaterial performance are critical to further development in the field. X-ray phase-contrast (XPC) imaging is an emerging class of X-ray techniques that have shown significant promise for imaging biomaterial and soft tissue structures. In this study, XPC imaging techniques are shown to enable three dimensional (3D) imaging and evaluation of islet volume, alginate hydrogel structure, and local soft tissue features ex vivo. Rat islets were encapsulated in sterile ultrapurified alginate systems produced using a high-throughput microfluidic system. The encapsulated islets were implanted in omentum pouches created in a rodent model of type 1 diabetes. Microbeads were imaged with XPC imaging before implantation and as whole tissue samples after explantation from the animals. XPC microcomputed tomography (μCT) was performed with systems using tube-based and synchrotron X-ray sources. Islets could be identified within alginate beads and the islet volume was quantified in the synchrotron-based μCT volumes. Omental adipose tissue could be distinguished from inflammatory regions resulting from implanted beads in harvested samples with both XPC imaging techniques. Individual beads and the local encapsulation response were observed and quantified using quantitative measurements, which showed good agreement with histology. The 3D structure of the microbeads could be characterized with XPC imaging and failed beads could also be identified. These results point to the substantial potential of XPC imaging as a tool for imaging biomaterials in small animal models and deliver a critical step toward in vivo imaging.

Gradients of soluble factors play an important role in many biological processes, including blood vessel assembly. Gradients can be studied in detail in vitro, but methods that enable the study of spatially distributed soluble factors and multi-cellular processes in vivo are limited. Here, we report on a method for the generation of persistent in vivo gradients of growth factors in a three-dimensional (3D) biomaterial system. Fibrin loaded porous poly (ethylene glycol) (PEG) scaffolds were generated using a particulate leaching method. Platelet derived growth factor BB (PDGF-BB) was encapsulated into poly (lactic-co-glycolic acid) (PLGA) microspheres which were placed distal to the tissue-material interface. PLGA provides sustained release of PDGF-BB and its diffusion through the porous structure results in gradient formation. Gradients within the scaffold were confirmed in vivo using near-infrared fluorescence imaging and gradients were present for more than 3 weeks. The diffusion of PDGF-BB was modeled and verified with in vivo imaging findings. The depth of tissue invasion and density of blood vessels formed in response to the biomaterial increased with magnitude of the gradient. This biomaterial system allows for generation of sustained growth factor gradients for the study of tissue response to gradients in vivo.

Three dimensional imaging techniques are needed for the evaluation and assessment of biomaterials used for tissue engineering and drug delivery applications. Hydrogels are a particularly popular class of materials for medical applications but are difficult to image in tissue using most available imaging modalities. Imaging techniques based on X-ray Phase Contrast (XPC) have shown promise for tissue engineering applications due to their ability to provide image contrast based on multiple X-ray properties. In this manuscript, we investigate the use of XPC for imaging a model hydrogel and soft tissue structure. Porous fibrin loaded poly(ethylene glycol) hydrogels were synthesized and implanted in a rodent subcutaneous model. Samples were explanted and imaged with an analyzer-based XPC technique and processed and stained for histology for comparison. Both hydrogel and soft tissues structures could be identified in XPC images. Structure in skeletal muscle adjacent could be visualized and invading fibrovascular tissue could be quantified. There were no differences between invading tissue measurements from XPC and the gold-standard histology. These results provide evidence of the significant potential of techniques based on XPC for 3D imaging of hydrogel structure and local tissue response.

Brown and beige adipose tissues have a significant capacity for energy expenditure that may be exploited as a treatment for obesity and metabolic disease. However, the limited volumes of these tissues in adults hinders realization of this potential. Engineering beige adipose tissue may provide an alternative source of this tissue. In this paper we describe the preparation of poly(ethylene glycol) (PEGDA) hydrogels with mechanical properties similar to native adipose tissue. Adipose derived stem cells (ASC) were cultured in hydrogels without adhesive sequences or degradable monomers. Cells were able to differentiate, independent of scaffold properties and were maintained as a viable and functioning adipose tissue mass. The cells expressed their own basement membrane proteins consistent with the composition of adipose tissue. The ASCs could be induced to express uncoupling protein-1 (UCP-1) and cIDEA, makers of beige adipocytes with expression level varying with hydrogel stiffness. This hydrogel-based culture system serves as a first step in engineering beige adipose tissue.

Tissues engineered in bioreactor systems have been used clinically to replace damaged tissues and organs. In addition, these systems are under continued development for many tissue engineering applications. The ability to quantitatively assess material structure and tissue formation is critical for evaluating bioreactor efficacy and for preimplantation assessment of tissue quality. Techniques that allow for the nondestructive and longitudinal monitoring of large engineered tissues within the bioreactor systems will be essential for the translation of these strategies to viable clinical therapies. X-ray Phase Contrast (XPC) imaging techniques have shown tremendous promise for a number of biomedical applications owing to their ability to provide image contrast based on multiple X-ray properties, including absorption, refraction, and scatter. In this research, mesenchymal stem cell-seeded alginate hydrogels were prepared and cultured under osteogenic conditions in a perfusion bioreactor. The constructs were imaged at various time points using XPC microcomputed tomography (µCT). Imaging was performed with systems using both synchrotron- and tube-based X-ray sources. XPC µCT allowed for simultaneous three-dimensional (3D) quantification of hydrogel size and mineralization, as well as spatial information on hydrogel structure and mineralization. Samples were processed for histological evaluation and XPC showed similar features to histology and quantitative analysis consistent with the histomorphometry. These results provide evidence of the significant potential of techniques based on XPC for noninvasive 3D imaging engineered tissues grown in bioreactors.

Biomaterials that regulate vascularized tissue formation have the potential to contribute to new methods of tissue replacement and reconstruction. The goal of this study was to develop a porous, degradable tissue engineering scaffold that could deliver multiple growth factors and regulate vessel assembly within the porous structure of the material. Porous hydrogels of poly(ethylene glycol)-co-(L-lactic acid) (PEG-PLLA) were prepared via salt leaching. The degradation time of the hydrogels could be controlled between 1 and 7 weeks, based on hydrogel composition. Fibrin was incorporated into the interconnected pores of the hydrogels to promote neovascularization and as a reservoir for rapid (5 days) growth factor delivery. Poly(lactic-co-glycolic acid) (PLGA) microspheres were incorporated into the degradable polymeric hydrogel scaffold to allow sustained (30 days) growth factor delivery. Fibroblast growth factor-1 (FGF-1) and platelet-derived growth factor-BB (PDGF-BB) were delivered from the system owing to their roles in the promotion of angiogenesis and vascular stabilization, respectively. Hydrogels tested in vivo with a subcutaneous implantation model were selected based on the results from in vitro degradation and growth factor release kinetics. Dual growth factor delivery promoted significantly more tissue ingrowth in the scaffold compared with blank or single growth factor delivery. The sequential delivery of FGF-1 following PDGF-BB promoted more persistent and mature blood vessels. In conclusion, a biomaterials system was developed to provide structural support for tissue regeneration, as well as delivery of growth factors that stimulate neovascularization within the structure prior to complete degradation.

Three-dimensional (3D) cell culture assays are important tools in the study of vessel assembly. Current techniques for quantitative analysis of vascular network structure have provided important insight into 3D vessel assembly. However, these methods typically require immunohistochemical staining, which requires sample destruction, or fluorescent cell labeling, which may alter cell behavior. The methods also may require sophisticated and expensive microscopy. More robust, easily quantifiable techniques are needed for imaging vascular networks non-invasively. We present an imaging method based on widefield optical sectioning and digital deconvolution (WOSD) that enables imaging of vascular networks in 3D culture without the use of cell labeling, staining, or sample destruction. WOSD can be performed using a standard optical microscope and allows non-invasive 3D monitoring of vascular network formation. This method is illustrated by imaging vascular networks in a 3D hydrogel system. WOSD enabled production of quantifiable 3D images of the network structure. Accuracy of the technique was evaluated by comparing data from WOSD with confocal images of fixed and fluorescently stained samples. Data for vessel length, diameter, and density are consistent between the two methods. The WOSD approach can be applied using standard laboratory equipment and shows great promise for use in analysis of 3D vascular network formation.

Proteolytically degradable poly(ethylene) glycol (PEG) hydrogels have been investigated as tissue engineering scaffolds; however, cell invasion and tissue regeneration are limited by the rate of cell-mediated degradation due to the small mesh size of the resultant crosslinked network. Gelatin leaching is combined with photopolymerization to form porous matrix-metalloproteinase (MMP)-sensitive PEG scaffolds under cytocompatible conditions in the presence of cells. Gelatin leaching allows control over pore size and porosity through selectivity of gelatin bead particle size and porogen loading, respectively. Increases in porogen loading lead to increased porosity, decreased compressive modulus and degradation time, and enhanced proliferation of encapsulated vascular smooth muscle cells.

Biomaterials are employed in the fields of tissue engineering and regenerative medicine (TERM) in order to enhance the regeneration or replacement of tissue function and/or structure. The unique environments resulting from the presence of biomaterials, cells, and tissues result in distinct challenges in regards to monitoring and assessing the results of these interventions. Imaging technologies for three-dimensional (3D) analysis have been identified as a strategic priority in TERM research. Traditionally, histological and immunohistochemical techniques have been used to evaluate engineered tissues. However, these methods do not allow for an accurate volume assessment, are invasive, and do not provide information on functional status. Imaging techniques are needed that enable non-destructive, longitudinal, quantitative, and three-dimensional analysis of TERM strategies. This review focuses on evaluating the application of available imaging modalities for assessment of biomaterials and tissue in TERM applications. Included is a discussion of limitations of these techniques and identification of areas for further development.

Natural hydrogels have been investigated for three-dimensional tissue reconstruction and regeneration given their ability to emulate the structural complexity of multi-component extracellular matrices (ECM). Hydrogels rich in ECM can be extracted and assembled from soft tissues, retain a composition specific to the tissue source, and stimulate vascularized tissue formation. However, poor mechanical properties and rapid degradation hinder their performance in regenerative applications. This study investigates the effect of glutaraldehyde (GA) crosslinking on the mechanical properties, biological activity, and degradation of dermis-isolated ECM-rich hydrogels. Compression tests indicated that hydrogel elastic moduli and yield stress values increased significantly with GA exposure time. Lyophilization was shown to decrease yield stress values with respect to non-lyophilized gels. Crosslinked ECM, unlike non-crosslinked gels, was resistant to pepsin degradation in vitro. In a rodent subcutaneous implant model, crosslinking for 0.5 hours or longer drastically slowed degradation relative to controls. Inflammation was low and mature vascularized granulation tissue was observed in all gels, with an increase in vessel density at 1 week in crosslinked gels relative to controls. These results support the potential use of dermis-derived hydrogels as materials for tissue engineering applications and suggest that crosslinking can enhance mechanical properties and prolong hydrogel lifetime while promoting vascularized tissue formation.

Plaque vulnerability depends, in part, on composition. Imaging techniques are needed that can aid the prediction of plaque stability. High-contrast images of soft-tissue structure have been obtained with x-ray phase-contrast (PC) imaging. This research investigates multiple image radiography (MIR), an x-ray PC imaging technique, for evaluation of human carotid artery plaques.Carotid plaques were imaged with ultrasound and subsequently excised and formalin fixed. MIR imaging was performed. By using synchrotron radiation, conventional radiographs were acquired for comparison. Image texture measures were computed for soft-tissue regions of the plaques.Ultrasound evaluation identified plaques as homogeneous without calcifications. MIR images revealed complex heterogeneous structure with multiple microcalcifications consistent with histology, and possessed more image texture in specific regions than conventional radiographs (P.05). MIR refraction images allowed imaging of the geometric structure of tissue interfaces within the plaques, while scatter images contained more texture in soft-tissue regions than absorption or refraction images.X-ray PC imaging better depicts plaque soft-tissue heterogeneity than ultrasound or conventional radiographs. MIR imaging technique should be investigated further as a viable imaging technique to identify high-risk plaques.

The design of materials for cutaneous wound dressings has advanced from passive wound covers to bioactive materials that promote skin regeneration and prevent infection. Crosslinked poly(N-isopropylacrylamide) (PNIPAAm)-based hydrogels have been investigated for a number of biomedical applications. While these materials can be used for drug delivery, limited cell interactions restrict their biological activity. In this article, acryoyl-lysine (A-Lys) was incorporated into poly(ethylene glycol) crosslinked PNIPAAm to enhance biological activity. A-Lys could be incorporated into the hydrogels to improve cellular interaction in vitro, while maintaining swelling properties and thermoresponsive behavior. Polyhexamethylene biguanide, an antimicrobial agent, could be encapsulated and released from the hydrogels and resulted in decreased bacteria counts within 2 hours. Two in vivo animal wound models were used to evaluate the hydrogel wound dressing. First, application of the hydrogels to a rodent cutaneous wound healing model resulted in significant increase in healing rate when compared with controls. Moreover, the hydrogels were also able to decrease bacteria levels in an infected wound model. These results suggest that PNIPAAm hydrogels containing A-Lys are promising wound dressings due to their ability to promote healing and deliver active antimicrobial drugs to inhibit infection.

Poly(ethylene glycol) (PEG) hydrogels have been investigated for a number of applications in tissue engineering. The hydrogels can be designed to mimic tissues that have desired chemical and mechanical properties, but their physical structure can hinder cell migration, tissue invasion, and molecular transport. Synthesis of porous PEG hydrogels could improve transport, enhance cell behavior, and increase the surface area available for cell adhesion. Salt leaching methods have been used extensively to generate porous biomaterial scaffolds but have not previously been applied to hydrogels. In this article we describe a modification of traditional salt leaching techniques for application to hydrogels. Salt-saturated polymer precursor solutions are prepared, and salt crystals of a defined size are added before polymerization. The salt crystals are then leached out, resulting in porous hydrogels. Examples are provided for application of this technique to PEG hydrogels. Porous PEG hydrogels were generated with pore sizes ranging from 15 to 86 microm and porosities from 30% to 75%. Porous hydrogels that were incorporated with a cell adhesion peptide supported cell adhesion with morphology varying with pore size. The simple, reproducible technique described here could be used to generate porous hydrogels with controlled pore sizes for applications in tissue engineering.

A technique for constructing microchannels within three-dimensional hydrogels is described. The method depends on the use of two photopolymerizable macromers with different degradation kinetics. Poly(ethylene glycol)-diacrylate (PEG-DA) and poly(ethylene glycol)-co(L-lactide) diacrylate (PEG-PLLA-DA) were synthesized and characterized by 1HNMR and FTIR. PEG-PLLA (but not PEG-DA) gels degrade rapidly via hydrolysis. Gels were formed via bulk photopolymerization of the macromers by exposure to ultraviolet light in the presence of 2,2-dimethoxy-2-phenylacetophenone (DMPA) as an initiator. Patterns of PEG-PLLA-DA were generated within multilayer PEG hydrogels by noncontact photolithography. When the hydrogels were exposed to high pH conditions, the patterned PEG-PLLA-DA structures degraded rapidly, resulting in channels within the PEG-DA hydrogels. Single and multilayered channels were formed and their structure examined by phase contrast and confocal microscopy.

Rapid and controlled vascularization within biomaterials is essential for many applications in regenerative medicine. The extent of vascularization is influenced by a number of factors, including scaffold architecture. While properties such as pore size and total porosity have been studied extensively, the importance of controlling the interconnectivity of pores has received less attention. A sintering method was used to generate hydrogel scaffolds with controlled pore interconnectivity. Poly(methyl methacrylate) microspheres were used as a sacrificial agent to generate porous poly(ethylene glycol) diacrylate hydrogels with interconnectivity varying based on microsphere sintering conditions. Interconnectivity levels increased with sintering time and temperature with resultant hydrogel structure showing agreement with template structure. Porous hydrogels with a narrow pore size distribution (130-150 μm) and varying interconnectivity were investigated for their ability to influence vascularization in response to gradients of platelet-derived growth factor-BB (PDGF-BB). A rodent subcutaneous model was used to evaluate vascularized tissue formation in the hydrogels in vivo. Vascularized tissue invasion varied with interconnectivity. At week 3, higher interconnectivity hydrogels had completely vascularized with twice as much invasion. Interconnectivity also influenced PDGF-BB transport within the scaffolds. An agent-based model was used to explore the relative roles of steric and transport effects on the observed results. In conclusion, a technique for the preparation of hydrogels with controlled pore interconnectivity has been developed and evaluated. This method has been used to show that pore interconnectivity can independently influence vascularization of biomaterials.

3D image reconstruction using light microscope modalities without exogenous contrast agents is proposed and investigated as an approach to produce 3D images of biological samples for live imaging applications. Multimodality and multispectral imaging, used in concert with this 3D optical sectioning approach is also proposed as a way to further produce contrast that could be specific to components in the sample. The methods avoid usage of contrast agents. Contrast agents, such as fluorescent or absorbing dyes, can be toxic to cells or alter cell behavior. Current modes of producing 3D image sets from a light microscope, such as 3D deconvolution algorithms and confocal microscopy generally require contrast agents. Zernike phase contrast (ZPC), transmitted light brightfield (TLB), darkfield microscopy and others can produce contrast without dyes. Some of these modalities have not previously benefitted from 3D image reconstruction algorithms, however. The 3D image reconstruction algorithm is based on an underlying physical model of scattering potential, expressed as the sample’s 3D absorption and phase quantities. The algorithm is based upon optimizing an objective function - the I-divergence - while solving for the 3D absorption and phase quantities. Unlike typical deconvolution algorithms, each microscope modality, such as ZPC or TLB, produces two output image sets instead of one. Contrast in the displayed image and 3D renderings is further enabled by treating the multispectral/multimodal data as a feature set in a mathematical formulation that uses the principal component method of statistics.

Background: Wound healing and skin tissue engineering are mediated, in part, by interactions between cells and the extracellular matrix (ECM). A subset of the ECM, basement membranes (BM), plays a vital role in regulating proper skin healing and function. Methods: ECM-rich, tissue-specific hydrogels were extracted and assembled from dermis samples. These hydrogels contain BM proteins vital to skin regeneration, including laminin β3, collagen IV, and collagen VII. The extracts could be assembled to form hydrogels by either temperature or pH mechanism, with the mechanical properties and structure varying with the mechanism of assembly. A wound healing model was developed to investigate the ability of these hydrogels to enhance healing with a single application in vivo. Results: The pH, but not temperature gels were easily applied to the wounds. There were no signs of increased inflammation due to the application of the hydrogels. The width of granulation tissue at the first week was reduced ( p = 0.064) relative to controls with the application of hydrogel. There were no changes in wound closure rates or vessel density. Conclusions: Dermis-derived hydrogels contain BM proteins important for skin regeneration. They can be easily applied, but their poor mechanical strength and rapid degradation may hinder their biological effects.

Cell behavior is guided by the complex interplay of matrix mechanical properties as well as soluble and immobilized biochemical signals. The development of synthetic scaffolds that incorporate key functionalities of the native extracellular matrix (ECM) for support of cell proliferation and tissue regeneration requires that stiffness and immobilized concentrations of ECM signals within these biomaterials be tuned and optimized prior to in vitro and in vivo studies. A detailed experimental sensitivity analysis was conducted to identify the key polymerization conditions that result in significant changes in both elastic modulus and immobilized YRGDS within visible light photopolymerized poly(ethylene glycol) diacrylate (PEGDA) hydrogels. Among the polymerization conditions investigated, single as well as simultaneous variations in N-vinylpyrrolidinone (NVP) and precursor concentrations of Acryl-PEG3400-YRGDS resulted in a broad range of hydrogel elastic modulus (81 – 1178 kPa) and YRGDS surface concentration (0.04 – 1.72 pmol/cm2). Increasing the YRGDS surface concentration enhanced fibroblast cell adhesion and proliferation for a given stiffness, while increases in hydrogel elastic modulus caused decreases in cell adhesion and increases in proliferation. The identification of key polymerization conditions is critical for the tuning and optimization of biomaterial properties and the controlled study of cell-substrate interactions.

The spatial presentation of immobilized extracellular matrix (ECM) cues and matrix mechanical properties play an important role in directed and guided cell behavior and neovascularization. The goal of this work was to explore whether gradients of elastic modulus, immobilized matrix metalloproteinase (MMP)-sensitivity, and YRGDS cell adhesion ligands are capable of directing 3D vascular sprout formation in tissue engineered scaffolds. PEGDA hydrogels were engineered with mechanical and biofunctional gradients using perfusion-based frontal photopolymerization (PBFP). Bulk photopolymerized hydrogels with uniform mechanical properties, degradation, and immobilized biofunctionality served as controls. Gradient hydrogels exhibited an 80.4% decrease in elastic modulus and a 56.2% decrease in immobilized YRGDS. PBFP hydrogels also demonstrated gradients in hydrogel degradation with degradation times ranging from 10–12 hours in the more crosslinked regions to 4–6 hours in less crosslinked regions. An in vitro model of neovascularization, composed of co-culture aggregates of endothelial and smooth muscle cells, was used to evaluate the effect of these gradients on vascular sprout formation. Aggregate invasion in gradient hydrogels occurred bi-directionally with sprout alignment observed in the direction parallel to the gradient while control hydrogels with homogeneous properties resulted in uniform invasion. In PBFP gradient hydrogels, aggregate sprout length was found to be twice as long in the direction parallel to the gradient as compared to the perpendicular direction after three weeks in culture. This directionality was found to be more prominent in gradient regions of increased stiffness, crosslinked MMP-sensitive peptide presentation, and immobilized YRGDS concentration.

Carotid artery plaque instability can result in rupture and lead to ischaemic stroke. Stability of plaques appears to be a function of composition. Current non-invasive imaging techniques are limited in their ability to classify distinct histological regions within plaques. Phase-contrast (PC) X-ray imaging methods are an emerging class of techniques that have shown promise for identifying soft-tissue features without use of exogenous contrast agents. This is the first study to apply analyser-based X-ray PC imaging in CT mode to provide three-dimensional (3D) images of excised atherosclerotic plaques. The results provide proof of principle for this technique as a promising method for analysis of carotid plaque microstructure. Multiple image radiography CT (MIR-CT), a tomographic implementation of X-ray PC imaging that employs crystal optics, was employed to image excised carotid plaques. MIR-CT imaging yields three complementary images of the plaque's 3D X-ray absorption, refraction and scatter properties. These images were compared with histological sections of the tissue. X-ray PC images were able to identify the interface between the plaque and the medial wall. In addition, lipid-rich and highly vascularized regions were visible in the images as well as features depicting inflammation. This preliminary research shows MIR-CT imaging can reveal details about plaque structure not provided by traditional absorption-based X-ray imaging and appears to identify specific histological regions within plaques. This is the first study to apply analyser-based X-ray PC imaging to human carotid artery plaques to identify distinct soft-tissue regions.

Natural hydrogels have been investigated for three-dimensional tissue reconstruction and regeneration given their ability to emulate the structural complexity of multi-component extracellular matrices (ECM). Hydrogels rich in ECM can be extracted and assembled from soft tissues, retain a composition specific to the tissue source, and stimulate vascularized tissue formation. However, poor mechanical properties and rapid degradation hinder their performance in regenerative applications. This study investigates the effect of glutaraldehyde (GA) crosslinking on the mechanical properties, biological activity, and degradation of dermis-isolated ECM-rich hydrogels. Compression tests indicated that hydrogel elastic moduli and yield stress values increased significantly with GA exposure time. Lyophilization was shown to decrease yield stress values with respect to non-lyophilized gels. Crosslinked ECM, unlike non-crosslinked gels, was resistant to pepsin degradation in vitro. In a rodent subcutaneous implant model, crosslinking for 0.5 hours or longer drastically slowed degradation relative to controls. Inflammation was low and mature vascularized granulation tissue was observed in all gels, with an increase in vessel density at 1 week in crosslinked gels relative to controls. These results support the potential use of dermis-derived hydrogels as materials for tissue engineering applications and suggest that crosslinking can enhance mechanical properties and prolong hydrogel lifetime while promoting vascularized tissue formation.

Vascular network formation within biomaterial scaffolds is essential for the generation of properly functioning engineered tissues. In this study, a method is described for generating composite hydrogels in which porous poly(ethylene glycol) (PEG) hydrogels serve as scaffolds for mechanical and structural support, and fibrin is loaded within the pores to induce vascularized tissue formation. Porous PEG hydrogels were generated by a salt leaching technique with 100-150-μm pore size and thrombin (Tb) preloaded within the scaffold. Fibrinogen (Fg) was loaded into pores with varying concentrations and polymerized into fibrin due to the presence of Tb, with loading efficiencies ranging from 79.9% to 82.4%. Fibrin was distributed throughout the entire porous hydrogels, lasted for greater than 20 days, and increased hydrogel mechanical stiffness. A rodent subcutaneous implant model was used to evaluate the influence of fibrin loading on in vivo response. At weeks 1, 2, and 3, all hydrogels had significant tissue invasion, but no difference in the depth of invasion was found with the Fg concentration. Hydrogels with fibrin loading induced more vascularization, with a significantly higher vascular density at 20 mg/mL (week 1) and 40 mg/mL (weeks 2 and 3) Fg concentration compared to hydrogels without fibrin. In conclusion, we have developed a composite hydrogel that supports rapid vascularized tissue ingrowth, and thus holds great potential for tissue engineering applications.

Porous hydrogels of poly(ethylene glycol) (PEG) have been shown to facilitate vascularized tissue formation. However, PEG hydrogels exhibit limited degradation under physiological conditions which hinders their ultimate applicability for tissue engineering therapies. Introduction of poly(L-lactic acid) (PLLA) chains into the PEG backbone results in copolymers that exhibit degradation via hydrolysis that can be controlled, in part, by the copolymer conditions. In this study, porous, PEG-PLLA hydrogels were generated by solvent casting/particulate leaching and photopolymerization. The influence of polymer conditions on hydrogel architecture, degradation and mechanical properties was investigated. Autofluorescence exhibited by the hydrogels allowed for three-dimensional, non-destructive monitoring of hydrogel structure under fully swelled conditions. The initial pore size depended on particulate size but not polymer concentration, while degradation time was dependent on polymer concentration. Compressive modulus was a function of polymer concentration and decreased as the hydrogels degraded. Interestingly, pore size did not vary during degradation contrary to what has been observed in other polymer systems. These results provide a technique for generating porous, degradable PEG-PLLA hydrogels and insight into how the degradation, structure, and mechanical properties depend on synthesis conditions.

Alginate-based materials have received considerable attention for biomedical applications because of their hydrophilic nature, biocompatibility, and physical architecture. Applications include cell encapsulation, drug delivery, stem cell culture, and tissue engineering scaffolds. In fact, clinical trials are currently being performed in which islets are encapsulated in PLO coated alginate microbeads as a treatment of type I diabetes. However, large numbers of islets are required for efficacy due to poor survival following transplantation. The ability to locally stimulate microvascular network formation around the encapsulated cells may increase their viability through improved transport of oxygen, glucose and other vital nutrients. Fibroblast growth factor-1 (FGF-1) is a naturally occurring growth factor that is able to stimulate blood vessel formation and improve oxygen levels in ischemic tissues. The efficacy of FGF-1 is enhanced when it is delivered in a sustained fashion rather than a single large-bolus administration. The local long-term release of growth factors from islet encapsulation systems could stimulate the growth of blood vessels directly towards the transplanted cells, potentially improving functional graft outcomes. In this article, we outline procedures for the preparation of alginate microspheres for use in biomedical applications. In addition, we describe a method we developed for generating multilayered alginate microbeads. Cells can be encapsulated in the inner alginate core, and angiogenic proteins in the outer alginate layer. The release of proteins from this outer layer would stimulate the formation of local microvascular networks directly towards the transplanted islets.

Porous scaffolds based on poly(α-hydroxy-esters) are under investigation in many tissue engineering applications. A biological response to these materials is driven, in part, by their three-dimensional (3D) structure. The ability to evaluate quantitatively the material structure in tissue-engineering applications is important for the continued development of these polymer-based approaches. X-ray imaging techniques based on phase contrast (PC) have shown a tremendous promise for a number of biomedical applications owing to their ability to provide a contrast based on alternative X-ray properties (refraction and scatter) in addition to X-ray absorption. In this research, poly(α-hydroxy-ester) scaffolds were synthesized and imaged by X-ray PC microcomputed tomography. The 3D images depicting the X-ray attenuation and phase-shifting properties were reconstructed from the measurement data. The scaffold structure could be imaged by X-ray PC in both cell culture conditions and within the tissue. The 3D images allowed for quantification of scaffold properties and automatic segmentation of scaffolds from the surrounding hard and soft tissues. These results provide evidence of the significant potential of techniques based on X-ray PC for imaging polymer scaffolds.

Vascularization is influenced by the physical architecture of a biomaterial. The relationship between pore size and vascularization has been examined for hydrophobic polymer foams, but there has been little research on tissue response in porous hydrogels. The goal of this study was to examine the role of pore size on vessel invasion in porous poly(ethylene glycol) (PEG) hydrogels. Vascularized tissue ingrowth was examined using three-dimensional cell culture and rodent models. In culture, all porous gels supported vascular invasion with the rate increasing with pore size. Following subfascial implantation, porous gels rapidly absorbed wound fluid, which promoted tissue ingrowth even in the absence of exogenous growth factors. Pore size influenced neovascularization, within the scaffolds and also the overall tissue response. Cell and vessel invasion into gels with pores 25-50 μm in size was limited to the external surface, while gels with pores larger pores (50-100 and 100-150 μm) permitted mature vascularized tissue formation throughout the entire material volume. A thin layer of inflammatory tissue was present at all PEG-tissue interfaces, effectively reducing the area available for tissue growth. These results show that porous PEG hydrogels can support extensive vascularized tissue formation, but the nature of the response depends on the pore size.

Androgen receptor (AR) is able to promote stress-induced cell death independently of its transcription activity in androgen-independent prostate cancer cells. Yet, the underlying mechanism is incompletely understood. Here, we report that stress-induced proteasomal degradation of AR contributes to its pro-death activity. Upon exposure to ultraviolet light and staurosporine, AR underwent proteasomal degradation. Blockade of AR degradation significantly suppressed stress-induced apoptosis in androgen-independent prostate cancer cells. Ectopic expression of the AR N-terminal (AR-N) domain, which lacks DNA- and ligand-binding abilities, led to cell death without any additional death stimuli. Truncation analysis revealed that AR-N domain contains several sub-domains that regulate the pro-death activity of AR, specifically the first 105 amino acids, which function as a minimal pro-death domain acting upstream of caspases. The pro-apoptotic activity of AR N-terminal fragments was suppressed by ectopic expression of Bcl-2 or selected caspase inhibitors. Thus, our results reveal a novel mechanism by which AR promotes stress-induced cell death in androgen-independent prostate cancer cells.

The development of a functional microvasculature is critical to the long-term survival of implanted tissue-engineered constructs. Dynamic culture conditions have been shown to significantly modulate phenotypic characteristics and stimulate proliferation of cells within hydrogel-based tissue engineered blood vessels. Although prior work has described the effects uniaxial or equibiaxial mechanical stimulation has on endothelial cells, no work has outlined effects of three-dimensional mechanical stimulation on endothelial cells within tubular vessel analogues. We demonstrate here that 7 days of 10% cyclic volumetric distension has a deleterious effect on the average length and density of angiogenic sprouts derived from pellets of bovine aortic endothelial cells. Although both groups demonstrated lumen formation, the sprouts grown under dynamic culture conditions typically had wider, less-branching sprout patterns. These results suggest that prolonged mechanical stimulation could represent a cue for angiogenic sprouts to preferentially develop larger lumens over cellular migration and subsequent sprout length.

Microvascular network formation is required for the success of many therapies in regenerative medicine. The process of vessel assembly is fundamentally altered, however, in many people within the potential patient population, including the elderly and people with diabetes. Significant research has been performed to determine how cellular dysfunction contributes to this inadequate neovascularization, but alterations in the extracellular matrix (ECM) may also influence this process. Glycation of ECM proteins, specifically type I collagen, increases as people age and is accelerated due to uncontrolled diabetes. This glycation results in increased ECM stiffness and resistance to degradation. The goal of this research is to determine whether collagen glycation consistent with changes in aged (defined as people older than 80 years old) and diabetic individuals influences neovascularization. Collagen gels that were incubated in glucose-6-phopshate (G6P) for varying times exhibited cross-linking (26.2+/-8.1% and 31.3+/-5.6% for incubation in 375 mM G6P for 5 and 8 days, respectively), autofluorescence, and advanced glycation end product levels (666+/-481 and 2122+/-501 pmol/mg protein for 5 and 8 days of 375 mM G6P, respectively) consistent with aged and diabetic populations. Three-dimensional culture models showed that sprouting angiogenesis was delayed in collagen gels with high levels of glycation. When implanted in vivo, glycated gels were degraded (44.4+/-4.2% and 49.5+/-11.7% nondegraded gel remaining for gels incubated for 5 and 8 days in 375 mM G6P, respectively) and vascularized (75.5+/-32.0 and 73.7+/-23.6 vessels/mm(2)) more slowly than controls (22.3+/-9.9% gel remaining and 133.3+/-31.0 vessels/mm(2)). These results suggest that glycation of collagen can alter neovascularization and may contribute to alterations in vessel assembly observed as people age and due to diabetes.

Controlled vascular response in scaffolds following implantation remains a significant clinical challenge. A critical biomaterial design criterion is the synchronization of the rates of scaffold degradation and vascularized tissue formation. Matrix metalloproteinases (MMPs) are key enzymes that regulate neovascularization and extracellular matrix remodelling. Synthetic protease-sensitive hydrogels offer controllable environments for investigating the role of matrix degradation on neovascularization. In this study, PEG hydrogels containing MMP-sensitive peptides with increased catalytic activity for MMPs expressed during neovascularization were investigated. Scaffolds were functionalized with MMP-2-, MMP-14- or general collagenase-sensitive peptides and with varying peptide concentration using crosslinkers containing one (SSite) or multiple (TSite) repeats of each protease-sensitive sequence. Increasing peptide concentration enhanced the degradation kinetics of scaffolds functionalized with MMP-specific sequences while 80% of the collagenase-sensitive scaffolds remained upon exposure to MMP-2 and MMP-14. In vitro neovascularization was consistent with in vivo tissue invasion with significantly increased invasion occurring within SSite MMP-specific as compared to collagenase-sensitive hydrogels and with further invasion in TSite as compared to SSite hydrogels regardless of peptide specificity. All scaffolds supported in vivo neovascularization; however, this was not dependent on peptide specificity. These findings demonstrate that peptide concentration and specificity regulate in vivo scaffold degradation, neovascularization and matrix remodelling.