Search

Purpose: This study focused on generation MZ and the changes in their appearance management behavior following the outbreak of COVID-19. The purpose of this study was to design a paradigm model for the beauty behavior of Generation MZ after the spread of COVID-19.Methods: In-depth interviews among qualitative research techniques were used to examine the changes in the in-depth behavior and psychology of Generation MZ following the outbreak of COVID-19.Results: Generation MZ consumes cosmetics and set appearance management behaviors—along with the use of cosmetics as beauty routines—to solve beauty concerns caused by situational factors (such as COVID-19), thereby expressing an individual’s ideal appearance. Following COVID-19, Generation MZ had a variety of beauty concerns that differed from those prior to the outbreak. To solve these concerns, Generation MZ made changes, such as focusing on skincare and simplifying beauty routines. Following the conclusion of COVID-19, Generation MZ is planning appropriate levels of appearance management behavior, in consideration of the pre- and post-COVID-19 era.Conclusion: The appearance management behavior of Generation MZ has changed significantly since the COVID-19 outbreak. Detailed behavioral psychology has transformed as new beauty concerns have arisen following the spread of the virus. Therefore, it is necessary to plan a new cosmetics development and marketing strategy to satisfy the needs of Generation MZ during the pandemic.

The seminal vesicles are the glands of male reproductive organs that produce the fluid and nutrient constituents of semen. It has been believed for a long time that the lumen of a seminal vesicle was a single-coiled tubular structure with irregular diverticula. There are several previous reports on the symmetry, differences in morphological sizes and classification of the seminal vesicles. However, a three-dimensional-coiled tubular structure is difficult to understand using a classical anatomical methodology, and hence, three-dimensional reconstruction is needed to understand the structure of the lumen. Thirty-one seminal vesicles harvested from 21 formalin-embalmed cadavers were investigated. The seminal vesicle along with the ampulla of the ductus deferens was separated, and the length and width of each seminal vesicle were measured. The vesicles were then embedded in coloured paraffin, and the resulting paraffin block was sectioned transversely and photographed at an interval of 500 μm, with the sectioned surfaces then utilized in three-dimensional reconstruction performed by 'Reconstruct' software. The mean length and width of the seminal vesicles were 39.4 mm and 13.4 mm, respectively, and the right seminal vesicle was a little larger than the one on the left. The size differed from previous reports, while the luminal structure was similar to the classification of Aboul-azm (Archives of Andrology, 3, 1979, 287-292) but differed from that of Pereira (AJR. American Journal of Roentgenology, 69, 1953, 361-379). The seminal vesicles typically comprised about 9 curls and had about 12 diverticula. The seminal vesicles resembled a skein of coral rather than comprising a single strand. These findings will help in improving the understanding of pathophysiologies of the seminal vesicles, such as recurrent inflammation of the gland.

Summary Background The deep temporal fascia (DTF) is known to separate into two layers that descend to attach to the zygomatic arch. When surgeons reduce an isolated fracture of the zygomatic arch through a temporal approach, the temporal incision site needs to be superior to the split line of the DTF. Materials and Methods Sixty-seven hemifacial cadavers were investigated after removing the skin, subcutaneous tissue, and superficial temporal fascia. The superficial layer of the DTF was exposed. We cut the superficial layer along the line along, which it adhered to the deep layer inseparably. The heights of the split line of the DTF from the superior border of the zygomatic arch and from the top of the helix were measured at three points: at the jugale, zygion, and 3 cm from the tragus. Results In all cases there were thick identifiable deep layers of the DTF. The mean heights of the split line of the DTF from the superior border of the zygomatic arch were 49.8, 46.7, and 42.6 mm at the jugale, zygion, and 3 cm from the tragus, respectively; the corresponding mean heights of the split line from the top of the helix were 19.1, 15.6, and 11.4 mm. Conclusions Knowledge of the mean height of the split line of the DTF will be helpful for surgeons to determine the temporal incision site for ensuring the safe reduction of a zygomatic arch fracture.

Frankfort horizontal line, the line passing through the orbitale and porion, is one of the most widely used intracranial landmarks in cephalometric analysis. This study investigated the use of the orbito-occipital line extending from the orbitale to the external occipital protuberance as a novel horizontal line of the skull for substituting the Frankfort horizontal line. We evaluated the reproducibility of the new landmark and measured the angle between the orbito-occipital line and the Frankfort line. This study was conducted on 170 facial computed tomography (CT) scans of living adults from the Department of Plastic Surgery. After three-dimensionally reconstructed images were obtained from facial CT, the porion, orbitale, and external occipital protuberance were indicated by two observers twice. The angles between the orbito-meatal line (inferior orbital rim to porion; the Frankfort line) and the orbito-occipital line (inferior orbital rim to external occipital protuberance) were measured. There was no significant intraobserver or interobserver bias. The overall angle between the Frankfort line and orbito-occipital line was −0.5°±2.2° (mean±standard deviation). There was no statistically significant difference among side and sex. This study demonstrated good reproducibility of a new landmark—the external occipital protuberance—tested to replace the porion. The orbito-occipital line is a reliable, reproducible, and easily identifiable line, and has potential as a novel standard horizontal line to replace or at least supplement the Frankfort line in anthropological studies and certain clinical applications.

Cu2ZnSn(S,Se)4 (CZTSSe) thin-film solar cells are showing great promise due to using earth-abundant and nontoxic materials and tuning the band gap through the amount of S and Se. Flexible high-effi...

Background Vision loss caused by retrograde occlusion of the central retinal artery is a serious complication of cosmetic filler injections. Salvage methods that involve applying hyaluronidases in the retrobulbar space to degrade filler materials have been proposed recently for rescuing the retinal circulation in an ophthalmic emergency. Methods Sixty-six eyeballs and orbital contents were extracted from formalin-embalmed cadavers and dissected carefully to examine the topographic relationship of the central retinal artery and optic nerve. To observe the three-dimensional course of a central retinal artery that invaginates into the optic nerve, serial sections reconstructed at 100-μm intervals using software were visualized in 11 specimens. Results The central retinal artery ramified from the ophthalmic artery and entered the optic nerve inferiorly at 8.7 ± 1.7 mm (mean ± SD) from the posterior margin of the eyeball. The intraneural course of a central retinal artery changed acutely between the periorbital environment of the fibrous optic nerve sheath, intermediate subarachnoid spaces, and center of the optic nerve stroma. Conclusion When applying a retrobulbar approach for central retinal artery reperfusion with hyaluronidases, the reliable access route is suggested to be at a depth of 3.0 to 3.5 cm from the border of the inferolateral orbital rim, based on consideration of the entry point of the central retinal artery into the optic nerve.

As ubiquitous computing provide up-graded smart environments where humans desire to create various types of interaction for many kinds of media and information, the research in the area of Human-Computer Interaction (HCI) is being emphasized to satisfy a more convenient user interface. In particular, the gesture interaction technique has been one of the important research areas under ubiquitous computing environment since it can only utilize widespread consumer video cameras and computer vision techniques without the aid of any other devices to grasp human movements and intentions(Park, 2004; Jung, 2007). Among the gesture interaction techniques, recognition of hand poses and gestures has especially received attention due to great potential to build various and user-centric computer interfaces. The applicability of hand pose recognition is very high in applications where system users can not use existing interface devices such as a keyboard and a mouse since they are required to wear heavy protective gloves for industrial processes. Various types of gesture interfaces have been also presented in three-dimensional games based on virtual reality and these interfaces have enhanced an interest level and creativity within these environments for the users. Humans can distinguish hand poses very quickly through their complex optical systems, while it is very difficult for a computer system to rapidly and accurately understand hand poses. Therefore, many researchers have tried to simulate the human optical system, which can extract objects of interest from complex scenes and understand the context among objects. One of the major factors that disturb automatic gesture recognition is illumination change. The sudden illumination changes lead to the misunderstanding of background and foreground regions. We propose a robust hand recognition technique that can stably extract hand contours even under sudden illumination changes. Figure 1 shows the flowchart for our proposed method. The proposed method acquires the background images for a restricted duration and calculates the mean and standard deviation for the hue and hue-gradient of each pixel within the captured background images. That is, a background model for each pixel is built. The hue and hue-gradient of the input images captured in real-time are calculated and compared to those of the background images. The foreground objects are extracted based on the difference magnitude between those of the input image and the background image. To accurately extract the tight object region of interest, we calculate the eigen value and eigen

It is well‐known that the alkali doping of polycrystalline Cu2ZnSn(S,Se)4 (CZTSSe) and Cu(In,Ga)(Se,S)2 has a beneficial influence on the device performance and there are various hypotheses about the principles of performance improvement. This work clearly explains the effect of Na doping on the fill factor (FF) rather than on all of the solar cell parameters (open‐circuit voltage, FF, and sometimes short circuit current) for overall performance improvement. When doping is optimized, the fabricated device shows sufficient built‐in potential and selects a better carrier transport path by the high potential difference between the intragrains and the grain boundaries. On the other hand, when doping is excessive, the device shows low contact potential difference and FF and selects a worse carrier transport path even though the built‐in potential becomes stronger. The fabricated CZTSSe solar cell on a flexible metal foil optimized with a 25 nm thick NaF doping layer achieves an FF of 62.63%, thereby clearly showing the enhancing effect of Na doping.

The Frankfurt line is the most frequently and widely used reference line in cephalometric analysis, but has shortcomings including the difficulty of landmark identification. This study investigated using the superior border of the zygomatic arch as a new external bony landmark, including measuring the angle between the new reference line and the Frankfurt line. Facial computed tomography scans were obtained from 170 patients (100 males and 70 females) hospitalized at Konkuk University Chungju Hospital. After three-dimensional reconstruction, the locations of the porion and the inferior orbital rim and the superior border of the zygomatic arch were identified twice by two observers using software. A horizontal line parallel to the superior border of the zygomatic arch was established. The angle between the Frankfurt line and new reference line was then measured on each side. There was no significant intraobserver or interobserver bias. The angle between the Frankfurt line and the superior border of the zygomatic arch was 4.5° ± 2.5° (mean ± SD), and it was somewhat larger in females than males, but the difference was not statistically significant. This study demonstrated the good reproducibility of the location of the superior border of the zygomatic arch and found that the angle between the new reference line and the Frankfurt line is relatively constant. The superior border of the zygomatic arch therefore has potential as an alternative reference line to the Frankfurt line in specific clinical applications and anthropological studies, since it is a more accessible bony landmark on the external skull.

It is well‐known that the alkali doping of polycrystalline Cu2ZnSn(S,Se)4 (CZTSSe) and Cu(In,Ga)(Se,S)2 has a beneficial influence on the device performance and there are various hypotheses about the principles of performance improvement. This work clearly explains the effect of Na doping on the fill factor (FF) rather than on all of the solar cell parameters (open‐circuit voltage, FF, and sometimes short circuit current) for overall performance improvement. When doping is optimized, the fabricated device shows sufficient built‐in potential and selects a better carrier transport path by the high potential difference between the intragrains and the grain boundaries. On the other hand, when doping is excessive, the device shows low contact potential difference and FF and selects a worse carrier transport path even though the built‐in potential becomes stronger. The fabricated CZTSSe solar cell on a flexible metal foil optimized with a 25 nm thick NaF doping layer achieves an FF of 62.63%, thereby clearly showing the enhancing effect of Na doping., The effects of Na doping on polycrystalline flexible Cu2ZnSn(S,Se)4 (CZTSSe) solar cells are analyzed. When doping is excessive, the device shows low contact potential difference and fill factor and selects a worse carrier transport path even though the built‐in potential becomes stronger. On the other hand, the optimized CZTSSe solar cell clearly shows the enhancing effect of Na doping.

In article number 1903085, Woo‐Lim Jeong, Kyung‐Pil Kim, Dong‐Seon Lee, and co‐workers analyze the effects of Na doping on polycrystalline flexible CZTSSe solar cells. When doping is excessive, a device shows low contact potential difference and fill factor and selects a worse carrier transport path even though the built‐in potential becomes stronger. On the other hand, the optimized CZTSSe solar cell clearly showed the enhancing effect of Na doping. [Image: see text]

This paper presents the design of a control system for improving performance of a washer fluid heating system (WFHS) which is capable of removing frost, ice, snow and/or other debris from windshield. First, for the WFHS, a modeling process is described, and the extraction of characteristic parameters of the model are made by experimental studies. Design variables that affect on performance of the WFHS are also presented. Secondly, a control system is proposed for improving heating performance of the WFHS, and its performance is verified through experiments. The key feature of the proposed control system is to regulate the current of a booster converter input to the WFHS up to the target value that is set to guarantee heating performance. Target current is calculated by using initial temperature value and employing the mathematical model derived in the paper. Computer simulation and experimental results show that the proposed control system can perform heating operations in a way to satisfy per-determined target performance of the WFHS.

In this paper, we present a robust hand recognition approach to sudden illumination changes. The proposed approach constructs a background model with respect to hue and hue gradient in HSI color space and extracts a foreground hand region from an input image using the background subtraction method. Eighteen features are defined for a hand pose and multi-class SVM(Support Vector Machine) approach is applied to learn and classify hand poses based on eighteen features. The proposed approach robustly extracts the contour of a hand with variations in illumination by applying the hue gradient into the background subtraction. A hand pose is defined by two Eigen values which are normalized by the size of OBB(Object-Oriented Bounding Box), and sixteen feature values which represent the number of hand contour points included in each subrange of OBB. We compared the RGB-based background subtraction, hue-based background subtraction and the proposed approach with sudden illumination changes and proved the robustness of the proposed approach. In the experiment, we built a hand pose training model from 2,700 sample hand images of six subjects which represent nine numerical numbers from one to nine. Our implementation result shows 92.6% of successful recognition rate for 1,620 hand images with various lighting condition using the training model.

Rifampin is common drug to treat tuberculosis. Rifampin induced acute renal failure, hemolytic anemia and thrombocytopenia is rare and severe complication. We have experienced a case of rifampin induced acute renal failure, hemolytic anemia and thrombocytopenia. Forty-six years old male was suffered from reactivation of pulmonary tuberculosis, and had to medicate antituberculosis drugs including rifampin(600mg/day). Seven years ago, antituberdulosis medication were successfully administered to treat pulmonary tuberculosis without any side effects of drugs. But eight days after readministration of rifampin, fever, abdominal pain, vomiting, oliguria, elevated BUN and creatinine were developed. And thrombocytopenia was also identified after administration of rifampin. The patient was recovered slowly after discontinuation of rifampin & intensive medical care. The renal function was normalized at 55 days after cessation of rifampin. The renal pathologic findings were interstitial nephritis and acute tubular necrosis. And, the rifampin dependent antibodies were identified by indirect antiglobulin test in the presence of rifampin. So we report this case with a brief review of literature.