Search

The identification and seismic characterization of the active structures in the Alboran Sea (westernmost Mediterranean) are essential to evaluate better the exposure of the South Iberian Peninsula and Maghreb coasts to different natural hazards. The Alboran Sea accommodates part of the present-day crustal deformation related to the NW-SE convergence (4-5 mm/yr) between the African and Eurasian plates. The area is characterized by low to moderate magnitude instrumental seismicity. However, large earthquakes (I > IX and M > 6.0) have occurred in this region in historical and recent times (i.e., 1522 Almeria, 1790 Oran, 1910 Adra, 1994 and 2004 Al-Hoceima or 2016 Al-Idrissi earthquakes). The dextral strike-slip Yusuf Fault System (YFS) is one of the largest active faults in the Alboran Sea and its seismogenic and tsunamigenic hazard needs to be characterized. The fault system trends WNW-ESE and has a length of ~150 km. Using multi-scale bathymetric (ranging from m to cm) and seismic data and different morphological and seismic analysis tools (i.e., slope or relief image maps), we have imaged and characterized the fault system. The analysis of this dataset reveals that the YFS is a complex structure composed of an array of strike-slip faults. The 3D structural model shows that most of the identified faults reach up and offset the seafloor and the Upper Quaternary sedimentary units. The current morphology of the seafloor is a consequence of the Plio-Quaternary tectonic evolution that have resulted in the formation of a large pull-apart basin, which is deeper than the surrounding areas, a topographic ridge, an elongated depression and morphologic lineaments following its trend. The dataset also images several submarine landslides scars, mainly on the steeper slopes surrounding the pull-apart basin. In addition, the analysis of ultra-high resolution data acquired along the Yusuf lineament with AUV has revealed the presence of a series of en-echelon scarps with heights ranging from few centimeters to less than 10 meter. Seismic profiles across these scarps show that they are related to different fault strands of the YFS that are offsetting the seafloor, possibly because of an earthquake occurred in historical times.

How fault segments grow and connect in regions with moderate to high seismic activity is key to assess associated hazards. Earthquakes may affect populated areas and can trigger tsunamis that threaten coastal areas and affect marine infrastructures. Regions accommodating relatively slow tectonic deformation may still enclose active fault systems capable of generating moderate to large magnitude earthquakes, albeit at long recurrence intervals (103 to 104 years). Although the Alboran Sea is currently characterised by slow tectonic deformation and by earthquakes of low to moderate magnitude, large historical and instrumental events have also occurred (i.e., the Almeria 1522 IEMS98 VIII-IX or the Al-Idrissi 2016 Mw 6.4 earthquakes). This Neogene basin located in the westernmost Mediterranean Sea absorbs most of the convergence between the Eurasian and Nubian plates (3 - 5 mm/year) by means of four tectonic-scale fault systems: the Carboneras and Al-Idrissi left-lateral strike-slip faults, the Yusuf right-lateral strike-slip fault and the Alboran Ridge thrust.Our study characterises the North-South fault system on the northern Alboran Sea to better understand the kinematics of the region on a larger scale. This system is proposed as the northern termination of the Al-Idrissi fault, and it may be presently evolving due to the transtensional stress field that affects the area. The first step to characterise the fault system has been to elaborate a detailed geomorphological map of the area to describe the identified scarps, their distribution, and structural relations. To achieve this, we have used very high-resolution bathymetric data (1x1 m pixel resolution) acquired with an autonomous underwater vehicle. The bathymetry shows several fault scarps striking N-S, resulting in horst and graben systems. The second step has involved the interpretation of high-resolution multichannel airgun and sparker seismic profiles running across the N-S faults. The integration of this dataset allows us to relate the morphological scarps with different normal faults interpreted in the seismic profiles. These faults cut the post-Messinian seismostratigraphic units (last 5.3 Ma) up to the seafloor, which supports that the fault system is currently active. Finally, the high segmentation of the North-South fault system and its small accumulated fault displacements supports it is in its initial stage of evolution.

28 pages, 10 figures, 1 table, supporting information https://doi.org/10.1111/sed.12844.-- Data availability The data that support the findings of this study are available from the corresponding author upon reasonable request., Synchronous interaction between bottom currents and turbidity currents has been reported often in channel–levée systems where the thickness of the turbidity currents exceeds that of the levées. Such interplay between along-slope and down-slope sedimentary processes is one of the mechanisms by which ‘mixed turbidite–contourite systems’ can originate. However, bottom currents flow over large areas of the seafloor, including continental slopes characterized by deeply incised submarine canyons rather than channel levées. In these cases, a direct interaction between along-slope and down-slope currents is, theoretically, unlikely to take place. In this study, oceanographic, swath bathymetry, multichannel seismic data and sediment cores are used to investigate a 25 km long, 10 km wide and up to 0.5 km thick deep-sea late Quaternary deposit that sits adjacent to the north-west flank of one of the major canyons in the North Atlantic, the São Vicente Canyon, in the Alentejo Basin (south-west Iberian margin). The area receives the influence of a strong bottom current, the Mediterranean Outflow Water, which has swept the continental slope at different water depth ranges during glacial and interglacial periods. Architectural patterns and sediment characteristics suggest that this sedimentary body, named Marquês de Pombal Drift, is the result of the interaction between the Mediterranean Outflow Water (particularly during cold periods) and turbidity currents flowing along the São Vicente Canyon. Because the canyon is incised significantly deeper (ca 1.5 km) than the thickness of turbidity currents, an additional process, in comparison to earlier models, is needed to allow the interaction with the Mediterranean Outflow Water and transport sediment out of the canyon. In the São Vicente Canyon, and likely in other canyons worldwide, interaction of turbidity currents with contour currents requires intermediate nepheloid layers that export the finer-grained fraction of turbidity currents out of the canyon at the boundary between major water masses, This research received funding by the European Union’s Horizon 2020 research and innovating programme under the Marie Sklodowska-Curie grant via project ITN-SLATE (grant agreement No 721403). The Spanish “Ministerio de Ciencia e Innovación” and the European Regional Development Fund are also acknowledged for funding through grant CTM2015-70155-R (project INSIGHT), With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000928-S)

23 pages, 12 figures, 4 tables, supporting information https://doi.org/10.1111/bre.12553.-- Data availability: Data from the IODP-340 Expedition and the seismic datasets used are available at: http://iodp.tamu.edu/scienceops/expeditions/antilles_volcanism_landslides.html, http://donnees-campagnes.flotteoceanographique.fr/search, West off Martinique (Lesser Antilles), the Grenada Basin submarine sediments were affected by the emplacement of Debris Avalanche Deposits (DAD). Montagne Pelée Volcano has experienced three major flank collapses during the last ca. 127 kyrs, resulting in a cumulated volume of up to 300 km3 offshore. Using a combination of geophysical and geotechnical data, we investigate the effect of these debris avalanches emplacements on the basin hydrogeology and their relationship with the observed sediment deformation in the seismic and coring data. The geotechnical test carried on IODP-340 cores samples reveal four sediment types within the basin with distinctive mechanical and hydraulic properties: proximal volcanoclastics, distal volcanoclastics, hemipelagic and ash-rich sediments. These results, together with margin stratigraphic models obtained from seismic reflection data, were used as inputs for the numerical finite-element model. This model shows that the coupling of the sediment properties with the mid- to low-sedimentation rates results in the development of low overpressures prior to the first flank collapse at 127 ka. However, the emplacement of the first two DADs, between 127 and 36 ka, developed high overpressures ratios (λ* > 0.9) in the easternmost part of the Grenada Basin. According to the model, the sudden compaction of the pre-existing sediments due to the DADs load created fluid flow velocities up to 7 times higher than the hydraulic conductivities, which would have thus reduced the sediment bearing capacities and shear strength, favouring their mobilization and deformation. From 127 to 36 ka, the sea-floor sediments suffered a long-term deformation driven by the combination of the weight of the emplaced material and the persistence of high overpressure ratios through time. This deformation propagated tens of kilometres away from the DAD’s emplacement and it is possible that still continues today due to the persistence of low overpressure ratios. This long-term and long-distance deformation and persisted overpressures are a key factor to take into account in the framework of a geohazards evaluation in areas recurrently affected by earthquakes and volcanic flank collapses, This study was supported by the PREST project co- funded by INTERREG Caraïbes for the European Regional Development Fund.-- With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000928-S)

International audience

European Geosciences Union (EGU) General Assembly 2020, 4-8 May 2020, Contourite deposits are generated by the interplay between deepwater bottom-currents, sediment supply and seafloor topography. The Gulf of Cadiz, in the Southwest Iberian margin, is a famous example of extensive contourite deposition driven by the Mediterranean Outflow Water (MOW), which exits the Strait of Gibraltar, flows northward following the coastline and distributes the sediments coming from the Guadalquivir and Guadiana rivers. The MOW and related contourite deposits affect the stability of the SW Iberian margin in several ways: on one hand it increases the sedimentation rate, favoring the development of excess pore pressure, while on the other hand, by depositing sand it allows pore water pressure to dissipate, potentially increasing the stability of the slope. In the Gulf of Cadiz, grain size distribution of contourite deposits is influenced by the seafloor morphology, which splits the MOW in different branches, and by the alternation of glacial and interglacial periods that affected the MOW hydrodynamic regimes. Fine clay packages alternates with clean sand formations according to the capacity of transport of the bottom-current in a specific area. Generally speaking, coarser deposits are found in the areas of higher MOW flow energy, such as in the shallower part of the slope or in the area closer to the Strait of Gibraltar, while at higher water depths the sedimentation shifts to progressively finer grain sizes as the MOW gets weaker. Previous works show that at present-day the MOW flows at a maximum depth of 1400 m, while during glacial periods the bottom-current could have reached higher depths. In this study we derived the different maximum depths at which the MOW flowed by analyzing the distribution of sands at different depths along the Alentejo basin slope, in the Northern sector of the Gulf of Cadiz. Here we show how changes in sand distribution along slope, within the stratigraphic units deposited between the Neogene and the present day, are driven by glacial – interglacial period alternation that influenced the hydrodynamic regime of the MOW. By deriving the depositional history of sand in the Alentejo basin, we are able to correlate directly the influence that climatic cycles had on the MOW activity. Furthermore, by interpreting new multi-channel seismic profiles we have been able to derive a detailed facies characterization of the uppermost part of the Gulf of Cadiz. An accurate definition of sand distribution along slope plays an important role in evaluating the stability of the slope itself, e.g. to understand if the sediments may be subjected to excess pore pressure generation. As sand distribution is a direct function of the bottom-current transport capacity, the ultimate goal of this study is to understand how climate variations can affect the stability of submarine slope by depositing contourite-related sand, This project has received funding from the European Union’sHorizon 2020 research and innovation programme under grantagreement No 721403

European Geosciences Union (EGU) General Assembly 2020, 4-8 May 2020, Using a combination of geophysical and geotechnical data from the Storfjorden Trough Mouth Fan, off southern Svalbard, we investigate the role of glacial advances and retreats over the continental shelf on the hydrogeology of the continental margin. The results of compressibility and permeability tests are used together with margin stratigraphic models from seismic data, as input for numerical finite element models to understand focusing of interstitial fluids in glaciated continental margins. The modeled evolution of the Storfjorden TMF from 2.7 to 0.2 Ma shows that onset of glacial sedimentation (~1.5 Ma) had a significant role in developing aquicludes (tills) on the shelf that decreased the vertical fluid flow towards the sea floor and diverted it towards the slope. This model shows that prior to 220 ka, high overpressure ratio (λ~0.6) develops below the shelf edge and in the middle slope. A more detailed, high resolution model for the last 220 kyrs accounting for ice loading during Glacial Maxima shows that the less permeable glacigenic debris flows deposited during glacial maxima on the slope hinder fluid evacuation from the plumites. This effect in combination with the fluid flow focusing from the shelf allows high overpressure ratio (λ~0.7) to develop in the shallower-most plumite layers. These high overpressures likely persist to the Present and are critical in determining the onset of submarine slope failure. The safety factor of the upper continental slope is reduced by 60% due to the combination of high sedimentation rates, ice loading and focusing of fluids during Glacial Maxima with values of the factor of safety reaching 1.2 during the LGM and beginning of the last deglaciation

15 pages, 16 figures, 1 table, supplementary material https://doi.org/10.1016/j.margeo.2017.11.013, Submarine mass movements may have profound effects on the morphology and stratigraphic architecture of continental margins. Furthermore, they can represent a threat to human life and infrastructures, and also have implications for hydrocarbon exploration/production. In polar regions, they are one of the predominant sedimentary processes on the continental slope. Exploration seismology has been widely employed to study mass-transport deposits (landslides, glacigenic debris flows, mass flows, etc.), which are usually characterized by chaotic reflections. In this study, we analyse a seismic profile acquired in the southern part of the Storfjorden trough mouth fan (NW Barents Sea margin), showing the presence of two submarine mass-transport deposits (MTDs). A giant MTD (PLS-1) is located on the lower continental slope at 2.6–3 km depth, while a more recent MTD (PLS-2) occurs at 1.9–2.4 km depth. Velocity and attenuation seismic tomography, seismic attributes analyses and rock-physics models reveal distinct petrophysical properties for PLS-1 and PLS-2. Despite the known influence of burial depth(s), fluid flow content, and compaction on the internal character of MTDs, the two deposits studied here, in fact, show distinct petrophysical characteristics that reflect lithological variations - more than to any other control. These results suggest different source areas for the two MTDs. The inferred coarser sediment in PLS-1 indicates provenance from areas with abundant glacigenic debris flows, (such as the Bjørnøya Trough-Mouth Fan). Conversely, the finer, relatively fluid-rich sediments of PLS-2 that underwent little translation could have an origin in the area between trough-mouth fans. Here, slow-moving ice resulted in a relatively scarce release of subglacial debris at the shelf edge and the continental slope was subject to enhanced erosion and degradation with a comparatively higher production of relatively fine-grained turbidite flows, We wish to thank the entire staff that supported the OGS IPY Project EGLACOM. The Italian contribution was funded by the PNRA project VALFLU and by the ARCA project. Spanish participants were funded by the Spanish projects DEGLABAR (CTM2010-17386) and CORIBAR-ES (CTM2011-14807-E) funded by the “Ministerio de Economia y Competitividad”. The “Generalitat de Catalunya” is acknowledged for support through an excellence research group grant (2014SGR940). J.L. was funded by an FPI grant BES-2011-043614.

13 pages, 12 figures, 5 tables, Sample disturbance is still a key issue in offshore investigations, especially when logistic and financial limitations do not allow the use of drilling equipment. This paper focuses on the comparison between the disturbance induced by a conventional free-fall piston corer (FF) and a modified piston corer (AD) equipped with a velocity control (Angel Descent method). Twin core samples were retrieved in two successions of pelitic sediments with a prevailing non-clayey fraction and a non-negligible sandy fraction. Comparison was based on different acquisition, physical and mechanical parameters ranging from accelerometer data to magnetic susceptibility logs and geotechnical parameters from laboratory investigations, including oedometer compression tests and cyclic simple shear tests. Accelerometer data highlighted the sharp reduction in velocity obtained for AD samples. Magnetic susceptibility logs, characterized by a pattern of peaks induced by several volcaniclastic levels present in the succession, indicated that the AD method significantly reduces core shortening. Among geotechnical investigations, cyclic shear tests provided small-strain shear moduli always higher in AD samples, whilst the response of oedometer compression tests was equivocal. In fact, methods for assessing sample disturbance have demonstrated to bear limited effectiveness when applied to soils with relatively low clay content and significant overconsolidation as it is the case of the studied sediments, R. Urgeles and J. Llopart acknowledge funding from project INSIGHT (CTM2015-70155-R) jointly funded by the Spanish Ministerio de Economía y Competitividad and the European Regional Development Fund. The research was funded by grants awarded to FB, AC and PT from the National Research Program Flagship Projects RITMARE – The Italian Research for the Sea - coordinated by the Italian National Research Council

27 pages, 14 figures, 4 tables, supporting information https://doi.org/10.1111/bre.12331, Using a combination of geophysical and geotechnical data from Storfjorden Trough Mouth Fan off southern Svalbard, we investigate the hydrogeology of the continental margin and how this is affected by Quaternary glacial advances and retreats over the continental shelf. The geotechnical results show that plumites, deposited during the deglaciation, have high porosities, permeabilities and compressibilities with respect to glacigenic debris flows and tills. These results together with margin stratigraphic models obtained from seismic reflection data were used as input for numerical finite element models to understand focusing of interstitial fluids on glaciated continental margins. The modelled evolution of the Storfjorden TMF shows that tills formed on the shelf following the onset of glacial sedimentation (ca. 1.5 Ma) acted as aquitards and therefore played a significant role in decreasing the vertical fluid flow towards the sea floor and diverting it towards the slope. The model shows that high overpressure ratios (up to λ ca. 0.6) developed below the shelf edge and on the middle slope. A more detailed model for the last 220 kyrs accounting for ice loading during glacial maxima shows that the formation of these aquitards on the shelf focused fluid flow towards the most permeable plumite sediments on the slope. The less permeable glacigenic debris flows that were deposited during glacial maxima on the slope hinder fluid evacuation from plumites allowing high overpressure ratios (up to λ ca. 0.7) to develop in the shallowest plumite layers. These high overpressures likely persist to the Present and are a critical precondition for submarine slope failure, This study is funded by the ‘Ministerio Economia y Competitividad’ through grants DEGLABAR, (CTM2010‐17386), CORIBAR‐ES (CTM2011‐14807‐E) and SVAIS (POL2006‐07390). UNESCO and IUGS are also acknowledged for funding through projects IGCP‐585 and IGCP‐640. The Italian contribution was supported by PNRA project 2013/B2.08 VALFLU

Rebesco, Michele ... et al.-- Special Issue: PAST Gateways (Palaeo-Arctic Spatial and Temporal Gateways).-- 16 pages, 12 figures, 2 tables, supplementary data http://dx.doi.org/10.1016/j.quascirev.2016.02.007, Kveithola is a glacially-carved, E-W trending trough located in the NW Barents Sea, an epicontinental shelf sea of the Arctic Ocean located off northern Norway and Russia. A set of confined sediment drifts (the “Kveithola Drift”) is located in the inner part of the trough. In general, drift deposits are commonly characterized by high lateral continuity, restricted occurrence of hiatuses and relatively high accumulation rates, and thus represent excellent repositories of paleo-environmental information. We provide for the first time a detailed morphological and seismostratigraphic insight into this sediment drift, which is further supported by some preliminary lithological and sedimentological analyses. The complex morphology of the drift, imaged by combining all available multibeam data, includes a main and a minor drift body, two drift lenses in the outer part of the trough, more or less connected drift patches in the innermost part and small perched sediment patches in a structurally-controlled channel to the north. The seismic (PARASOUND) data show that the main and minor drift bodies are mainly well-stratified, characterized by sub-parallel reflections of moderate to high amplitude and good lateral continuity. The reflectors show an abrupt pinch-out on the northern edge where a distinct moat is present, and a gradual tapering to the south. Internally we identify the base of the drift and four internal horizons, which we correlate throughout the drift. Two units display high amplitude reflectors, marked lensoidal character and restricted lateral extent, suggesting the occurrence of more energetic sedimentary conditions. Facies typical for contourite deposition are found in the sediment cores, with strongly bioturbated sediments and abundant silty/sandy mottles that contain shell fragments. These characteristics, along with the morphological and seismic information, suggest a strong control by a bottom current flowing along the moat on the northern edge of the drift. Though both Atlantic and Arctic waters are known to enter the trough, from the west and the north respectively, brine-enriched shelf water (BSW) produced during winter and flowing westward in the moat, is suggested to be responsible for the genesis of the Kveithola Drift. The formation of BSW is inferred to have started around 13 cal ka BP, the onset of drift deposition, suggesting that conditions leading to atmospheric cooling of the surface waters and/or the presence of coastal polynyas and wind or floating ice shelves have persisted on the western Barents Shelf since that time. The units inferred to have been deposited under more energetic sedimentary conditions (tentatively dated to the Younger Dryas and to 8.9–8.2 cal ka BP) are suggestive of stronger BSW formation. In general, we infer that variations in the bottom current regime were mainly related to BSW formation due to atmospheric changes. They could also have been a response to successive episodes of grounded and sea ice retreat that allowed for a first limited, later open shelf current, which progressively established on the western Barents Sea shelf, The research cruise MSM30 CORIBAR and this study were partly funded through the MARUM DFG-Research Center/Cluster of Excellence “The Ocean in the Earth System” as part of MARUM project SD-2. This study contributes to the IPY initiative 367 NICESTREAM (Neogene Ice Streams and Sedimentary Processes on High- Latitude Continental Margins). The work was funded by the Italian projects OGS-EGLACOM, PNRA-CORIBAR-IT (PdR 2013/C2.01), ARCA (grant n. 25_11_2013_973) and PNRA-VALFLU, by the Council of Norway through its Centres of Excellence funding scheme (project number 223259), by the Spanish projects DEGLABAR (CTM2010-17386) and CORIBAR-ES (CTM2011-14807-E) funded by the “Ministerio de Economia y Competitividad”. The “Generalitat de Catalunya” is acknowledged for support through an excellence research group grant (2014SGR940). J.L. was funded by an FPI grant BES-2011-043614

13 pages, 2 figures, 7 tables, supplementary material https://doi.org/10.1016/j.wasman.2018.07.046, The recycling targets for municipal solid waste included in the EU Waste Framework Directive (WFD) are a relevant driver for sustainable waste management in the EU. According to the WFD, Member States should reach 50% recycling rate by 2020 while 65% has been recently approved for 2035. The aims of this paper are (1) to formalise the WFD definition of recycling rate, by converting it into a model that permits a systematic comparison across systems; and (2) to test the model by using a case study, in order to explore the analytical insights derived from the results, focused on the gap between the current management situation and the EU targets. To this end, a model is presented for the case of Spain at regional level (in Spain, the regional scale is relevant because the Autonomous Communities have to comply with the EU recycling targets according to the Spanish National Waste Management Plan). Results show that most Spanish regions will have to undertake profound changes regarding waste management in order to comply with the WFD. These changes are related to increasing separate collection (of food and garden waste, particularly), improving waste treatment efficiency and limiting the disposal of unsorted waste. The model informs policy-makers about the gap between the current performance of a given system (country, region, municipality) and the WFD target and identifies trade-offs between management strategies. It also contributes to the debate on the on-going revision of the WFD, particularly on the relevance of having a consistent definition of “municipal solid waste” accompanied by waste-stream specific definitions of “recycling”

Atlas of Submarine Glacial Landforms: Modern, Quaternary and Ancient.-- 2 pages, 1 figures, Glacigenic debris-flow deposits (Laberg & Vorren 1995; Laberg et al. 2012) are the most prominent component of high-latitude trough-mouth fans (TMFs), which develop off fast-flowing ice streams which occupy cross-shelf troughs during full-glacial periods. Glacial erosion and sediment transport to the shelf edge are most effective during glacial maxima; debris-flow deposits therefore represent short periods of a very high input of glacigenic sediments to the continental slope when the ice front reaches the shelf break. Conversely, relatively limited amounts of mostly hemipelagic sediments accumulate on the continental slope during interglacial periods (Dowdeswell et al. 2002)

17 pages, 12 figures, 3 tables, supplementary material http://dx.doi.org/10.1016/j.quascirev.2015.10.002, The development of two Arctic Trough Mouth Fans (TMFs), the Storfjorden and Kveithola TMFs, is investigated by means of sub-bottom and seismic reflection profiles, multibeam bathymetry and sediment samples allowing their detailed stratigraphic architecture to be defined. We find that the TMFs mainly consist of an alternation of rapidly deposited glacigenic debris flows during glacial maxima and a sequence of well-layered plumites and hemipelagic sediments, which were mainly deposited during the deglaciation phase of the adjacent glacial trough. We have identified eight units above regional reflector R1, which indicate that the ice sheet reached the shelf edge within the Storfjorden Trough on at least three occasions during the last ∼200 ka. A shallow subsurface unit of glacigenic debris flows suggests that the ice sheet had a short re-advance over the northern and central part of Storfjorden after the Last Glacial Maximum. From stratigraphy, core and literature data, we estimate that ice sheets reached the shelf edge between 19.5 to 22.5 ka, 61 to 65 ka and 135 to 167 ka. Detailed seismic imaging allows us to refine the sedimentary model of Arctic TMFs. The main differences to previous models involve gully formation during not only the deglaciation phase, but also during interglacials by dense shelf water cascading, and a specific timing for the occurrence of slope failures (i.e., shortly after the deglaciation phase). High mean sedimentation rates during glacial maxima of up to 18 kg m−2 yr−1 likely allow excess pore pressure to develop in the water rich plumites and hemipelagic sediments deposited in the previous deglacial period, particularly where such plumites attain a significant thickness. The position of the submarine landslides in the stratigraphic record suggest that such excess pore pressure is not enough to trigger the slope failures and suggests that earthquakes related to isostatic rebound are likely involved in the final activation, This study was funded by the “Ministerio de Economia y Competitividad” through the IPY projects SVAIS (POL2006-07390/CGL) and IPY-NICE STREAMS (CTM2009-06370-E/ANT), as well as projects DEGLABAR (CTM2010-17386) and CORIBAR-ES (CTM2011-14807-E). The “Generalitat de Catalunya” is acknowledged for support through an excellence research group grant (2014SGR940). The Italian projects EGLACOM, CORIBAR-IT and VALFLU are also acknowledged. The first author was funded by an FPI grant BES-2011-043614

Atlas of Submarine Glacial Landforms: Modern, Quaternary and Ancient.-- 2 pages, 1 figures, Multibeam-bathymetric data from Kveithola Trough show a seafloor characterized by east–west-trending mega-scale glacial lineations (MSGLs) overprinted by transverse grounding-zone wedges (GZWs). GZWs are thought to form by deposition of subglacial till at temporarily stable ice-sheet marine termini between successive episodic retreats (Batchelor & Dowdeswell 2015). Sub-bottom profiles show that the present-day morphology of Kveithola Trough is largely inherited from the palaeo-seafloor topography of the GZWs, which is now draped by deglacial to early Holocene glacimarine sediment about 15 m thick. The ice stream that produced such subglacial morphology was flowing from east to west towards the shelf edge in Kveithola Trough during the Last Glacial Maximum (LGM). Its rapid retreat was probably associated with progressive lift-off and successive rapid melting of grounded ice induced by eustatic sea-level rise

6th International Symposium on Submarine Mass Movements and Their Consequences (ISSMMTC), 23-25 September 2013, Kiel, Germany, Climate variations control sediment supply to the continental slope as well as glacial advances and retreats, which (a) cause significant stress changes in the sedimentary column and redistribution of interstitial fluids, (b) induce a particular margin stratigraphic pattern and permeability architecture and (c) are at the origin of isostatic adjustments that may reactivate faults. We test this hypothesis using a combination of geophysical and geotechnical data from the Storfjorden Trough Mouth Fan, off southern Svalbard. The results of compressibility and permeability testing are used together with margin stratigraphic models obtained from seismic reflection data, as input for numerical finite elements models to understand focusing of interstitial fluids in glaciated continental margins and influence on timing and location of submarine slope failure. Available results indicate values of overpressure of 0.23-0.5 (slope-shelf) that persists to present-day. This overpressure started to develop in response to onset of Pleistocene glaciations and reduced by half the factor of safety of the continental slope