Search

The goal of this work was to investigate the influence of rare-earth ions such as Nd3+ and Er3+ on the optical properties of tellurite glass of the TeO2-WO3-PbO-La2O3 system. The optical studies of the glasses comprised spectrophotometry (reflectance and transmittance) and spectroscopic ellipsometry. The spectrophotometric measurements yield a number of narrow absorption bands which correspond to characteristic transitions between the ground- and consecutive excited states of rare-earth ions. From ellipsometric studies, in turn, the dispersion of the refraction coefficient has been obtained which appears to be practically the same for the tellurite glass matrix and the matrix doped with Nd3+ and Er3+ ions. [ABSTRACT FROM AUTHOR]

The aim of the study was to evaluate kinetics of doxycycline hyclate release from polymeric bioresorbable implants and to examine suitability of this system for local treatment of periodontitis. Selected trimethylene carbonate/ϵ-caprolactone (TMC/CL) and glycolide/caprolactone (GL/CL) copolymers were synthesized and used as carriers in the form of small elastic rings with 5 wt% and 10 wt% doxycycline hyclate content, or in the form of flakes obtained through electro-spinning technique. The release of the drug under in vitro conditions has been tested. The study has shown that equimolar TMC/CL copolymer loaded with 10 wt% of doxycycline hyclate appears to be the most suitable copolymer for assumed system. The drug release proceeds mainly by diffusion of medium into the polymeric matrix and then the drug is washed out. Daily validation of doxycycline doses released by the system should ensure accurate course of the therapy., (Copyright © 2015 Elsevier B.V. All rights reserved.)

Slowly degradable copolymers of L-lactide and ε-caprolactone can provide long-term delivery and may be interesting as alternative release systems of cyclosporine A (CyA) and rapamycin (sirolimus), in which available dosage forms cause a lot of side effects. The aim of this study was to obtain slowly degradable matrices containing immunosuppressive drug from PLACL initiated by nontoxic Zr[Acac]₄. Three kinds of poly(L-lactide-co-ε-caprolactone) (PLACL) matrices with different copolymer chain microstructure were used to compare the release process of cyclosporine A and rapamycine. The influence of copolymer chain microstructure on drug release rate and profile was also analyzed. The determined parameters could be used to tailor drug release by synthesis of demanded polymeric drug carrier. The studied copolymers were characterized at the beginning and during the degradation process of the polymeric matrices by NMR spectroscopy, GPC (gel permeation chromatography), and DSC (differential scanning calorimetry). Different drug release profiles have been observed from each kind of copolymer. The correlation between drug release process and changes of copolymer microstructure during degradation process was noticed. It was determined that different copolymer composition (e.g., lower amount of caprolactone units) does not have to influence the drug release, but even small changes in copolymer randomness affect this process.

The effect of poly(L-lactide-co-TMC) chain microstructure (and its changes during degradation) on immunosuppressive drugs' release process was analyzed. Three kinds of poly(L-lactide-co-TMC) (PLATMC)--two semiblock and one random were used to prepare matrices containing cyclosporine A or rapamycine and drug free matrices. All of them degraded slowly enough to provide long term delivery of immunosuppressive agents. Moreover, copolymer chain microstructure determined the effect of drug loading on the degradation process. It was observed that matrices without drug obtained from semiblock copolymer degraded differently than matrices containing cyclosporine A or rapamycine, whereas all kinds of matrices obtained from random PLATMC degraded in similar way. This is the evidence that the only in case of semiblock copolymer factors concerning the presence of drug and the kind of drug influenced degradation process. Based on the obtained results, correlations between copolymer degradation and drug release process are proposed. According to our outcomes, regular drug release process may be obtained from highly randomized copolymers (R ≈ 1) that remain amorphous during degradation process. Determination of this factor may help in development of biodegradable systems, in which drug release rate and profile can be tailored by synthesis of polymer with appropriate chain microstructure., (Copyright © 2011 Elsevier B.V. All rights reserved.)

The synthesis and detailed (physico)-chemical ((1)H/(13)C NMR, FTIR, UV-vis and elemental analysis) characterizations of new star-shaped compounds based on tris(2-aminoethyl)amine, including in their structure an azomethine function (HCN-) and alkoxysemiperfluorinated (-O-(CH(2))(3)-(CF(2))(7)-CF(3)), octadecyloxy aliphatic (-O-(CH(2))(17)-CH(3)) chain or two phenyl rings (-Ph-Ph-) as a terminal group, were reported. The mesomorphic behavior was investigated by means of differential scanning calorimetry (DSC), polarized optical microscopy (POM) and additionally by FTIR(T) and UV-vis(T) spectroscopy. Wide-angle X-ray diffraction (WAXD) technique was used to probe the structural properties of the azomethines. Moreover, the azomethine A1 was electro-spun to prepare fibers with poly(methyl methacrylate) (PMMA) and investigated by DSC and POM. Additionally, a film of the A1 with PMMA was cast from chloroform and the thermal properties of the film were compared with the thermal properties of the fiber and powder. It was showed that terminal groups dramatically influence the thermal and optical properties of the star-shaped azomethines., (Copyright (c) 2009 Elsevier B.V. All rights reserved.)

New photoluminescence oligoazomethines possessing both hole and electron-transporting units in the main chain were synthesized. Triphenylamine (TPA) was used as the electron-donating group, while 4,4'-diaminooctafluorobiphenyl, 4,4'-(hexafluoro-isopropylidene)dianiline, 4-aminophenylsulfone, 4,4'-(4,4'-isopropylidenediphenyl-1,1'diyldioxy)dianiline and 2,5-bis(4-aminophenyl)-1,3,5-oxadiazole were used as the electron-acceptor or as the electron-donating group. The bifunctional oligomers (D-pi-A and D-pi-D) were soluble in some organic solvents such as chloroform, DMA, HMPA, NMP and formed transparent films on glass support. All oligomers exhibit high glass transition temperature in the range of 188-227 degrees C as determined by differential scanning calorimetry (DSC). The photoluminescence (PL) emission maximum peaks of the oligomers in solution are in the range of 459-552 nm (2.70-2.25 eV) corresponding to blue, blue-green or green light. The solvatochromic and protonation behavior of the oligomers in two solvents (DMA, chloroform) were detected. Oligomers protonated with methanesulfonic acid (MSA) are hypsochromically shifted with respect to the PL spectra of the pristine oligomers measured in solution. Relative PL intensity of the oligomers investigated in chloroform solution was found in the range of 0.10-0.50%, while for protonated ones it was detected in the range of 33-50% in relation to 9,10-diphenylanthracene. Blends of the oligoazomethines with poly(methylmethacrylate) (PMMA) (0.1%, w/w) emitted blue light. Thin films were also doped with iodine. Calculated energy gap for the undoped films following the Tauc relation was in the range of 2.46-2.69 eV while for the iodine doped oligomers in the range of 1.76-2.38 eV was found.

The spectroscopic properties of the aromatic polyketimine containing 3,8-diamino-6-phenylphenanthridine and ethylene linkage in the main chain (PK1) before and after doping are dominated by an interplay of electron-donating and electron-withdrawing effects mediated by its nitrogen atom and active groups in the dopants, respectively. Hydrogen and halogen bond formation or molecular recognition between PK1 and decanoic acid (DCA), n-decyl alcohol (DA), 1,10-dibromodecane (DBr), and n-decyl sulfonic acid (DSA) was investigated in comparison with undoped PK1. UV-vis and Fourier transform infrared (FTIR) absorption, wide-angle X-ray diffraction (WAXD), and the atomic force microscopy (AFM) technique are used to probe the spectroscopic properties of the phenanthridine "core" of PK1 as well as its complexes. Spectral changes were observed for the PK1 after doping, which supported the ionic, hydrogen, and halogen bond formation between the PK1 and protonation agents (dopants). This specific interaction of the dopant with the host polymer influences the polyketimine properties, and the following changes were observed: (i) changes in the band gap (E(g)) of the protonated polyketimine, (ii) changes in the FTIR spectra of doped PK1, (iii) changes in optical micrographs of the protonated PK1 (detected by the AFM technique), and (iv) changes in crystalline structure of doped PK1. Our study demonstrates how the properties of conjugated PK1 can be tuned by the supramolecular engineering concepts, which could be important for optoelectronic applications of the materials.

Relationship between structures and properties of new conjugated polyketanils (PKs) with special architectures, synthesized from three diketones, i.e. p-dibenzoylbenzene, dibenzyl, trans-1,2-dibenzoylethylene and 3,8-diamino-6-phenylphenanthridine, was investigated. The photoluminescence (PL) of green, yellow and red emitting light polymers and their blend was studied. These included the effects of excitation wavelength, concentration and film thickness on the PL. Photoluminescence properties of the PKs before and after protonation with 10-Camphorsulfonic acid (CSA) were tested. The structure formation of (PKs)(1)(CSA)(2) complexes are discussed on the basis of FTIR spectroscopy.