Search

This edition examines “The Tomb” in depth, including the historical context inwhich Lovecraft was writing, as well as the social and technological changesthat occurred. It exposes multilayered ghosts housed within the text. It alsoexamines Lovecraft’s fascination with the supernatural and the developmentof the horror genre, which he modeled after Poe’s work.

Thermoelectric power generation can play a key role in a sustainable energy future by converting waste heat from power plants and other industrial processes into usable electrical power. Current thermoelectric devices, however, require energy intensive manufacturing processes such as alloying and spark plasma sintering. Here, we describe the fabrication of a p-type thermoelectric material, copper selenide (Cu2Se), utilizing solution-processing and thermal annealing to produce a thin film that achieves a figure of merit, ZT, which is as high as its traditionally processed counterpart, a value of 0.14 at room temperature. This is the first report of a fully solution-processed nanomaterial achieving performance equivalent to its bulk form and represents a general strategy to reduce the energy required to manufacture advanced energy conversion and harvesting materials.

Cationic naked nanocrystals (NCs) are useful building units for assembling hierarchical mesostructured materials. Until now, their preparation required strongly electrophilic reagents that irreversibly sever bonds between native organic ligands and the NC surface. Colloidal instabilities can occur during ligand stripping if exposed metal cations desorb from the surface. We hypothesized that cation desorption could be avoided were we able to stabilize the surface during ligand stripping via ion pairing. We were successful in this regard by carrying out ligand stripping under equilibrium control with Lewis acid-base adducts of BF3. To better understand the microscopic processes involved, we studied the reaction pathway in detail using in situ NMR experiments and electrospray ionization mass spectrometry. As predicted, we found that cationic NC surfaces are transiently stabilized post-stripping by physisorbed anionic species that arise from the reaction of BF3 with native ligands. This stabilization allows polar dispersants to reach the NC surface before cation desorption can occur. The mechanistic insights gained in this work provide a much-needed framework for understanding the interplay between NC surface chemistry and colloidal stability. These insights enabled the preparation of stable naked NC inks of desorption-susceptible NC compositions such as PbSe, which were easily assembled into new mesostructured films and polymer-nanocrystal composites with wide-ranging technological applications.

This article explores an aspect of haunting and terror that surfaced after the Columbine schoolshooting, a specter crafted and refined through the journalistic practice of framing. This ghostinhabits the house of media, where it still continues to surface. American Horror Story: Murder House presents an incarnation of this ghost, opening a new way of thinking about bothjournalistic framing and the specter of mass violence.

Colloidal superparticles are size- and shape-controlled nanoparticle assemblies in the form of colloidal particles. Because these superparticles can exhibit physical and chemical properties different from both individual nanoparticles and their bulk assemblies, the development of superparticle synthesis has attracted significant research attention and is emerging as a new frontier in the field of nanotechnology. In this review, we discuss theoretical considerations on the nucleation and growth of colloidal superparticles. We then present recent progress in the synthesis and characterization of monodispersed colloidal superparticles, which are important for applications such as biomedical diagnosis, biological separation, and light emitting devices.

This paper reports that gas bubbles can be used to tailor the kinetics of the nucleation and growth of inorganic-nanocrystals in a colloidal synthesis. We conducted a mechanistic study of the synthesis of colloidal iron oxide nanocrystals using gas bubbles generated by boiling solvents or artificial Ar bubbling. We identified that bubbling effects take place through absorbing local latent heat released from the exothermic reactions involved in the nucleation and growth of iron oxide nanocrystals. Our results show that gas bubbles display a stronger effect on the nucleation of iron oxide nanocrystals than on their growth. These results indicate that the nucleation and growth of iron oxide nanocrystals may rely on different types of chemical reactions between the iron-oleate decomposition products: the nucleation relies on the strongly exothermic, multiple-bond formation reactions, whereas the growth of iron oxide nanocrystals may primarily depend upon single-bond formation reactions. The identification of exothermic reactions is further consistent with our results in the synthesis of iron oxide nanocrystals with boiling solvents at reaction temperatures ranging from 290 to 365 °C, by which we determined the reaction enthalpy in the nucleation of iron oxide nanocrystals to be -142 ± 12 kJ/mol. Moreover, our results suggest that a prerequisite for effectively suppressing secondary nucleation in a colloidal synthesis is that the primary nucleation must produce a critical amount of nuclei, and this finding is important for a priori design of colloidal synthesis of monodispersed nanocrystals in general.

We investigate the impact of the coupling symmetry and chemical nature of organic-inorganic interfaces on thermoelectric transport in Cu2-xSe nanocrystal thin films. By coupling ligand-exchange techniques with layer-by-layer assembly methods, we are able to systematically vary nanocrystal-organic linker interfaces, demonstrating how the functionality of the polar headgroup and the coupling symmetry of the organic linkers can change the power factor (S(2)σ) by nearly 2 orders of magnitude. Remarkably, we observe that ligand-coupling symmetry has a profound effect on thermoelectric transport in these hybrid materials. We shed light on these results using intuition from a simplified model for interparticle charge transport via tunneling through the frontier orbital of a bound ligand. Our analysis indicates that ligand-coupling symmetry and binding mechanisms correlate with enhanced conductivity approaching 2000 S/cm, and we employ this concept to demonstrate among the highest power factors measured for quantum-dot based thermoelectric inorganic-organic composite materials of ∼ 30 μW/m · K(2).

Colloidal superparticles are size- and shape-controlled nanoparticle assemblies in the form of colloidal particles. Because these superparticles can exhibit physical and chemical properties different from both individual nanoparticles and their bulk assemblies, the development of superparticle synthesis has attracted significant research attention and is emerging as a new frontier in the field of nanotechnology. In this review, we discuss theoretical considerations on the nucleation and growth of colloidal superparticles. We then present recent progress in the synthesis and characterization of monodispersed colloidal superparticles, which are important for applications such as biomedical diagnosis, biological separation, and light emitting devices.

Beyond Quantum Dots Semiconducting colloidal nanoparticles—quantum dots—are of interest for their unusual properties. One current challenge is the controlled assembly of colloidal particles into larger structures, such as two-dimensional lattices on a substrate, or three-dimensional superparticles. Wang et al. (p. 358 ) present a two-step self-assembly of CdSe/CdS semiconductor nanorods to form mesoscopic colloidal superparticles. The particles show well-defined super-crystalline domains with dimensions ranging from hundreds of nanometers to several microns, and with the particle morphology controlled by the number of constituent rods. Films of the needle-shaped superparticles were able to act as polarizing light-emitting diodes.

This Article reports a mechanistic study on the formation of colloidal UO(2)/In(2)O(3) and FePt/In(2)O(3) heterodimer nanocrystals. These dimer nanocrystals were synthesized via the growth of In(2)O(3) as the epitaxial material onto the seed nanocrystals of UO(2) or FePt. The resulting dimer nanocrystals were characterized using X-ray powder diffraction (XRD), energy dispersion spectroscopy, transmission electron microscopy (TEM), scanning transmission electron microscopy, and high-resolution TEM (HRTEM). The results from XRD and HRTEM clearly show that lattice strains exist in both of these dimer nanocrystals. Interestingly, the lattice of In(2)O(3) expands in UO(2)/In(2)O(3) dimers, whereas FePt/In(2)O(3) dimers exhibit compressed In(2)O(3) lattices. Using HRTEM and nanocrystal structure simulations, we have identified the crystallographic orientation of the attachment of the two segments in these two types of dimers. An unconventional Miller index was introduced to describe the crystallographic orientation of these heterodimer nanocrystals. On the basis of the results herein as well as those from other researchers, we propose an empirical law for the determination of the crystallographic attachment orientation in heterodimers: instead of growth on the facet of the seed nanocrystals where lattice mismatch is minimized, the growth of an epitaxial material often chooses the crystal facets where the first atomic monolayer of this material has the strongest affinity for the seed nanocrystals.

This communication reports a size-controlled synthesis of water-soluble 2,2'-diphenyl-1-picrylhydrazyl (DPPH) nanoparticles (NPs). These nanoparticles exhibit size-dependent absorption spectra and fast spin exchange-narrowed single-line EPR spectra. The linewidths of the EPR spectra of these water-soluble nanoparticles are approximately 1.5-1.8 G, which are equal or close to the narrowest line width (1.5 G) of the common DPPH standard in the form of water-insoluble microcrystals. In addition, these NPs are stable over a wide pH range of 3.0 to 10.0. These properties make these water-soluble DPPH NPs suitable for use as a new type of EPR standard, which is important for fundamental research and practical applications in fields such as the food industry and the life sciences. Furthermore, the DPPH NPs can potentially be used as a spin probe in biomedical studies.