Search

Surveys in the Milky Way and Large Magellanic Cloud revealed that the majority of massive stars will interact with companions during their lives. However, knowledge of the binary properties of massive stars at low metallicity, which approaches the conditions of the Early Universe, remains sparse. We present the Binarity at LOw Metallicity (BLOeM) campaign - an ESO large programme designed to obtain 25 epochs of spectroscopy for 929 massive stars in the SMC - the lowest metallicity conditions in which multiplicity is probed to date (Z = 0.2 Zsun). BLOeM will provide (i) the binary fraction, (ii) the orbital configurations of systems with periods P < 3 yr, (iii) dormant OB+BH binaries, and (iv) a legacy database of physical parameters of massive stars at low metallicity. The stars are observed with the LR02 setup of the giraffe instrument of the Very Large Telescope (3960-4570A, resolving power R=6200; typical signal-to-noise ratio S/N=70-100). This paper utilises the first 9 epochs obtained over a three-month time. We describe the survey and data reduction, perform a spectral classification of the stacked spectra, and construct a Hertzsprung-Russell diagram of the sample via spectral-type and photometric calibrations. The sample covers spectral types from O4 to F5, spanning the effective temperature and luminosity ranges 6.5

Context. MWC 656 was reported as the first known Be star with a black-hole (BH) companion in a 60 d period. The mass of the proposed BH companion is estimated to be between 4 - 7 MSun. This estimate is based on radial velocity (RV) measurements derived from the Fe ii 4583 emission line of the Be star disc and from the He ii 4686 emission line, assumed to be formed in a disc around the putative BH. Aims. Using new high-resolution spectroscopic data, we investigate whether MWC 656 truly contains a BH. Methods. We used the cross-correlation method to calculate the RVs of both the Be star and the He ii 4686 emission line and we derive a new orbital solution. We also performed disentangling to look for the spectral signature of a companion. Results. We derive an orbital period of 59.028 +- 0.011 d and a mass ratio q = M_Heii/M_Be = 0.12 +- 0.03, much lower than the previously reported q = 0.41 +- 0.07. Adopting a mass of the Be star of M_Be = 7.8 +- 2.0MSun, the companion has a mass of 0.94 +- 0.34MSun. For the upper limit of M_Be = 16MSun and q = 0.15, the companion has a mass 2.4MSun. Performing disentangling on mock spectra shows that the spectral signature of a non-degenerate stellar companion with such a low mass cannot be retrieved using our data. Conclusions. Our measurements do not support the presence of a BH companion in MWC 656. The derived upper limit on the mass of the companion rather indicates that it is a neutron star, a white dwarf, or a hot helium star. Far-UV data will help to reject or confirm a hot helium-star companion., Comment: 6 pages, 2 + 6 figures, 3 + 1 tables, accepted for publication in A&A

Hundreds of black holes with massive main-sequence companions (OB+BHs) might be identified from Gaia astrometry with the Astrometric Mass-Ratio Function (AMRF). We investigate the impact of blue supergiant companions (BSG) instead of dwarfs and the presence of additional companions in the system that are unresolved by Gaia on the astrometric identification of OB+BHs. We also explore how accurate the primary mass needs to be constrained. Moreover, we assess how the high-precision publishing constraints of astrometric binary orbits in the latest Gaia data release DR3 impact the detection of OB+BHs. We establish a BSG mass-magnitude relation and compute BSG AMRF curves. From a mock population of non- and single-degenerate massive binaries and triples with OB or BSG primaries, we asses the false-positive identification fraction and the effect of the BSG AMRF curves. We compare the number of stars with astrometric DR3 orbits in the second Alma Luminous Star catalogue (ALSII) with new predictions on the OB+BH detection using the conservative DR3 publishing criteria. BSG primaries and triples are not expected to impact the false-positive identification fractions significantly. However, if the evolutionary stage of the primary star is unknown, the usage of the BSG curves is still recommended. This also reduces the OB+BH identification fraction significantly. The primary mass does not need to be known to benefit from the high identification fraction of OB+BHs, while keeping the fraction of false-positives low. We find no OB+BH candidates in the ALS II among the DR3 orbits. This null-detection cannot be attributed to the underlying BH-formation scenario, but rather to the stringent DR3 selection criteria. To infer the BH-formation scenario with Gaia, we propose that the constraint on the relative parallax precision in DR4 should be 95% less conservative than the DR3 criterion.(Abridged), Comment: 15 pages (+ 5 appendix), 10 figures, 3 tables, submitted to A&A

Aims. To search for these rare objects, we study 32 Galactic O-type stars that were reported as SB1s in the literature. In our sample we include Cyg X-1, which is known to host an accreting stellar-mass BH, and HD 74194, a supergiant fast X-ray transient, in order to validate our methodology. The final goal is to characterise the nature of the unseen companions to determine if they are MS stars, stripped helium stars, triples, or compact objects such as neutron stars or stellar-mass BHs. Methods. After measuring radial velocities and deriving orbital solutions for all the systems in our sample, we performed spectral disentangling to extract putative signatures of faint secondary companions from the composite spectra. We derived stellar parameters for the visible stars and estimated the mass ranges of the secondary stars using the binary mass function. Variability observed in the photometric TESS light curves was also searched for indications of the presence of putative companions, degenerate or not. Results. In 17 of the 32 systems reported as SB1s, we extract secondary signatures, down to mass ratios of ~0.15. For the 17 newly detected double-lined spectroscopic binaries (SB2s), we derive physical properties of the individual components and discuss why they have not been detected as such before. Among the remaining systems, we identify nine systems with possible NS or low-mass MS companions. For Cyg X-1 and HD 130298, we are not able to extract any signatures for the companions, and the minimum masses of their companions are estimated to be about 7Msun. Our simulations show that secondaries with such a mass should be detectable from our dataset, no matter their nature: MS stars, stripped helium stars or even triples. While this is expected for Cyg X-1, confirming our methodology, our simulations also strongly suggest that HD 130298 could be another candidate to host a stellar-mass BH., Comment: 20 pages (31 pages of Appendix), 19 figures, A&A in press. The abstract is shorter than in the paper, and some figures, and tables have been cut in the paper

The hunt for compact objects is on. Rarely seen massive binaries with a compact object are a crucial phase in the evolution towards compact object mergers. In Gaia data release 3 (DR3), the first Gaia astrometric orbital solutions for binary sources will become available. We investigate how many black holes (BH) with massive main-sequence dwarf companions (OB+BH binaries) are expected to be detected as binaries in DR3 and at the end of the nominal 5-yr mission (DR4). We estimate the fraction of identifiable OB+BH binaries and discuss the distributions of the masses of both components and the orbital periods. We study the impact of different BH-formation scenarios. Using tailored models for the massive star population, which assume a direct collapse and no kick upon BH formation (the fiducial case), we estimate the fraction of OB+BH systems that Gaia will detect as binaries. A distance distribution according to that of the second Alma Luminous Star catalogue (ALSII) is assumed. We investigate how many of the systems detected as binaries are identifiable as OB+BH binaries, using a method based on astrometric data. In the fiducial case we conservatively estimate that 77% of the OB+BH binaries in ALSII will be detected as binaries in DR3, of which 89% are identifiable as OB+BH binaries. This leads to a total of around 190 OB+BH binaries, a 20-fold increase in the known sample of OB+BH binaries, covering an uncharted parameter space of long-period binaries. The size and properties of the identifiable OB+BH population will contain crucial observational constraints to improve our understanding of BH formation. In DR4, the detected fraction will increase to 85%, of which 82% will be identifiable. Hence, an additional ~5 systems could be identified, which are expected to have either very short or long periods. The fractions become smaller for different BH-formation scenarios. (truncated), Comment: 22 pages, 18 figures, 2 tables, accepted for publication in A&A

Luminous blue variable stars (LBVs) are of great interest in massive-star evolution as they experience very high mass-loss episodes within short periods of time. HR Car is a famous member of this class in the Galaxy. It has a large circumstellar nebula and has also been confirmed as being in a binary system. One means of gaining information about the evolutionary status and physical nature of LBVs is studying their environments. We investigated the stellar content within ~100 pc of HR Car and also its circumstellar nebula. Very Large Telescope (VLT) Multi Unit Spectroscopic Explorer (MUSE) observations of a 2'x2' region around the star highlight the incompleteness of stellar classification for stars with magnitudes of V > 13 mag. Eight B0 to B9 stars have been identified which may lie in close spatial vicinity to HR Car. For a region with a radius of r =1.2 degree (~100 pc at a distance of 4.8 kpc) around HR Car, existing catalogs list several late O-type and early B-type stars, but only one early O-type star. Given the relatively low stellar and nebular masses in the HR Car system, no early O-type stars and only a few late O-type stars would be expected in association with HR Car. Instead, HR Car's location in a point vector diagram suggests that HR Car is not isolated, but is part of a moving group with a population of B-type stars in a spiral arm, and it has not received a strong kick from a supernova explosion of a companion star or a merger event. Potential binary evolution pathways for the HR Car system cannot be fully explored because of the unknown nature of the companion star. Furthermore, the MUSE observations reveal the presence of a fast outflow and "bullets" that have been ejected at intervals of about 400 years. These features may have been caused by recurrent mass transfer in the system., Comment: 11 pages, 5 figures, to be published in A&A

The Compact Linear Collider (CLIC) is a TeV-scale high-luminosity linear $e^+e^-$ collider under development at CERN. Following the CLIC conceptual design published in 2012, this report provides an overview of the CLIC project, its current status, and future developments. It presents the CLIC physics potential and reports on design, technology, and implementation aspects of the accelerator and the detector. CLIC is foreseen to be built and operated in stages, at centre-of-mass energies of 380 GeV, 1.5 TeV and 3 TeV, respectively. CLIC uses a two-beam acceleration scheme, in which 12 GHz accelerating structures are powered via a high-current drive beam. For the first stage, an alternative with X-band klystron powering is also considered. CLIC accelerator optimisation, technical developments and system tests have resulted in an increased energy efficiency (power around 170 MW) for the 380 GeV stage, together with a reduced cost estimate at the level of 6 billion CHF. The detector concept has been refined using improved software tools. Significant progress has been made on detector technology developments for the tracking and calorimetry systems. A wide range of CLIC physics studies has been conducted, both through full detector simulations and parametric studies, together providing a broad overview of the CLIC physics potential. Each of the three energy stages adds cornerstones of the full CLIC physics programme, such as Higgs width and couplings, top-quark properties, Higgs self-coupling, direct searches, and many precision electroweak measurements. The interpretation of the combined results gives crucial and accurate insight into new physics, largely complementary to LHC and HL-LHC. The construction of the first CLIC energy stage could start by 2026. First beams would be available by 2035, marking the beginning of a broad CLIC physics programme spanning 25-30 years., Comment: 112 pages, 59 figures; published as CERN Yellow Report Monograph Vol. 2/2018; corresponding editors: Philip N. Burrows, Nuria Catalan Lasheras, Lucie Linssen, Marko Petri\v{c}, Aidan Robson, Daniel Schulte, Eva Sicking, Steinar Stapnes

Nanocrystalline diamond (NCD) is a promising material for electronic and mechanical micro- and nanodevices. Here we introduce a versatile pick-up and drop technique that makes it possible to investigate the electrical, optical and mechanical properties of as-grown NCD films. Using this technique, NCD nanosheets, as thin as 55 nm, can be picked-up from a growth substrate and positioned on another substrate. As a proof of concept, electronic devices and mechanical resonators are fabricated and their properties are characterized. In addition, the versatility of the method is further explored by transferring NCD nanosheets onto an optical fibre, which allows measuring its optical absorption. Finally, we show that NCD nanosheets can also be transferred onto 2D crystals, such as MoS2, to fabricate heterostructures. Pick-up and drop transfer enables the fabrication of a variety of NCD-based devices without requiring lithography or wet processing., Comment: 15 pages, 6 figures

A high-current annealing technique is used to fabricate nanogaps and hybrid diamond/graphite structures in boron-doped nanocrystalline diamond films. Nanometer-sized gaps down to 1 nm are produced using a feedback-controlled current annealing procedure. The nanogaps are characterized using scanning electron microscopy and electronic transport measurements. The structural changes produced by the elevated temperature, achieved by Joule heating during current annealing, are characterized using Raman spectroscopy. The formation of hybridized diamond/graphite structure is observed at the point of maximum heat accumulation., Comment: 14 pages 4 figures + 1 supplemental figure