Search

We report on the thermal, electrical, and mechanical properties of alginate biopolymer nanocomposites prepared by solution casting with various amounts of graphene oxide (GO) or reduced GO (rGO). Our data shows that the thermal stability of alginate nanocomposites can be improved by the introduction of cross‐linking through divalent metal cations, albeit that under these conditions little influence by the amount of rGO remains. On the other hand, the electrical conductivity of divalent metal ion cross‐linked‐rGO improves approximately 10 orders of magnitude with increasing weight fraction of rGO, whereas it declines for sodium alginate‐GO composites. In addition, storage moduli and glass to rubber transition temperatures show strong composition dependence as a consequence of complex interactions of the ions with both polymer and filler. We propose a mechanical model that allows for the accurate prediction of reinforcement by GO sheets in sodium alginate‐GO composites taking into account the orientational order of the sheets. Creep tests reveal the complex nature of multiple stress relaxation mechanisms in the nanocomposites although the stretched exponential Burgers’ model accurately describes short time creep compliance. POLYM. COMPOS., 39:E236–E249, 2018. © 2016 Society of Plastics Engineers [ABSTRACT FROM AUTHOR]

Atomistic coarse grained parameters were calculated from a non-equilibrium molecular dynamics simulation of the separation of an epoxy-copper interface. The methodology to determine the interaction energy and the equilibrium distance between the interfacial materials at a minimum energy is established. The traction-displacement relations of the separation under the influence of time taken for atomic interaction, displacement step, and molecular size have been studied. The study illustrates that the control of the time step in the molecular dynamics models is important to ensure a proper separation simulation. The result shows close matching with the thermodynamics work of adhesion. An analytical scheme to determine the coarse grained parameters from the relations is discussed. The proposed methodology contributes to the interpretation of interfacial adhesion beyond the continuum framework. [ABSTRACT FROM AUTHOR]

The environmental conditions during the Tokyo Olympic and Paralympic Games are expected to be challenging, which increases the risk for participating athletes to develop heat-related illnesses and experience performance loss. To allow safe and optimal exercise performance of Dutch elite athletes, the Thermo Tokyo study aimed to determine thermoregulatory responses and performance loss among elite athletes during exercise in the heat, and to identify personal, sports-related, and environmental factors that contribute to the magnitude of these outcomes. For this purpose, Dutch Olympic and Paralympic athletes performed two personalized incremental exercise tests in simulated control (15°C, relative humidity (RH) 50%) and Tokyo (32°C, RH 75%) conditions, during which exercise performance and (thermo)physiological parameters were obtained. Thereafter, athletes were invited for an additional visit to conduct anthropometric, dual-energy X-ray absorptiometry (DXA), and 3D scan measurements. Collected data also served as input for a thermophysiological computer simulation model to estimate the impact of a wider range of environmental conditions on thermoregulatory responses. Findings of this study can be used to inform elite athletes and their coaches on how heat impacts their individual (thermo)physiological responses and, based on these data, advise which personalized countermeasures (i.e. heat acclimation, cooling interventions, rehydration plan) can be taken to allow safe and maximal performance in the challenging environmental conditions of the Tokyo 2020 Olympic and Paralympic Games., (© 2021 The Author(s). Published by Informa UK Limited, trading as Taylor & Francis Group.)

By embedding conductive yarns in, or onto, knitted textile fabrics, simple but robust stretch sensor garments can be manufactured. In that way resistance based sensors can be fully integrated in textiles without compromising wearing comfort, stretchiness, washability, and ease of use in daily life. The many studies on such textile strain sensors that have been published in recent years show that these sensors work in principle, but closer inspection reveals that many of them still have severe practical limitations like a too narrow working range, lack of sensitivity, and undesired time-dependent and hysteresis effects. For those that intend to use this technology it is difficult to determine which manufacturing parameters, shape, stitch type, and materials to apply to realize a functional sensor for a given application. This paper therefore aims to serve as a guideline for the fashion designers, electronic engineers, textile researchers, movement scientists, and human-computer interaction specialists planning to create stretch sensor garments. The paper is limited to textile based sensors that can be constructed using commercially available conductive yarns and existing knitting and embroidery equipment. Within this subtopic, relevant literature is discussed, and a detailed quantitative comparison is provided focusing on sensor characteristics like the gauge factor, working range, and hysteresis.

Current athlete monitoring practice in team sports is mainly based on positional data measured by global positioning or local positioning systems. The disadvantage of these measurement systems is that they do not register lower extremity kinematics, which could be a useful measure for identifying injury-risk factors. Rapid development in sensor technology may overcome the limitations of the current measurement systems. With inertial measurement units (IMUs) securely fixed to body segments, sensor fusion algorithms and a biomechanical model, joint kinematics could be estimated. The main purpose of this article is to demonstrate a sensor setup for estimating hip and knee joint kinematics of team sport athletes in the field. Five male subjects (age 22.5 ± 2.1 years; body mass 77.0 ± 3.8 kg; height 184.3 ± 5.2 cm; training experience 15.3 ± 4.8 years) performed a maximal 30-meter linear sprint. Hip and knee joint angles and angular velocities were obtained by five IMUs placed on the pelvis, both thighs and both shanks. Hip angles ranged from 195° (± 8°) extension to 100.5° (± 8°) flexion and knee angles ranged from 168.6° (± 12°) minimal flexion and 62.8° (± 12°) maximal flexion. Furthermore, hip angular velocity ranged between 802.6 °·s -1 (± 192 °·s -1 ) and -674.9 °·s -1 (± 130 °·s -1 ). Knee angular velocity ranged between 1155.9 °·s -1 (± 200 °·s -1 ) and -1208.2 °·s -1 (± 264 °·s -1 ). The sensor setup has been validated and could provide additional information with regard to athlete monitoring in the field. This may help professionals in a daily sports setting to evaluate their training programs, aiming to reduce injury and optimize performance.

Membrane separation for gas purification is an energy-efficient and environment-friendly technology. However, the development of high performance membranes is still a great challenge. In principle, mixed matrix membranes (MMMs) have the potential to overcome current materials limitations, but in practice there is no straightforward method to match the properties of fillers and polymers (the main components of MMMs) in such a way that the final membrane performance reflects the high performance of the microporous filler and the processability of the continuous polymer phase. This issue is especially important when high flux polymers are utilized. In this work, we demonstrate that the use of small amounts of a glassy polymer in combination with high performance PIM-1 allow for the preparation of metal-organic framework (MOF)-based MMMs with superior separation properties and low aging rates under humid conditions, meeting the commercial target for post-combustion CO 2 capture., (© 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

To understand cartilage degenerative diseases and improve repair procedures, we investigate the influence of glycosaminoglycans (GAGs) on cartilage matrix biochemistry and functionality. Bovine articular chondrocytes were cultured in alginate beads with(out) para-nitrophenyl-beta-d-xyloside (PNPX) to inhibit GAG incorporation into newly formed proteoglycans. As expected, GAG deposition in alginate beads decreased with increasing PNPX concentration. Next to GAGs, collagen deposition and cross-linking also decreased. In the presence of PNPX, GAGs and collagen were deposited further away from the chondrocyte than in the control and increased amounts were found in the culture medium. These changes resulted in decreased functional properties of the construct. We conclude that in our culture system, intact proteoglycans play a role in deposition of collagen and thus the formation of a functional matrix. The effect of less proteoglycans on the collagen network could explain why cartilage repair is ineffective in osteoarthritis and help us with development of new therapies.