Search

Non-syndromic cleft lip with or without cleft palate (NSCL/P) is the most common developmental defect that significantly affects the morphology and function of the stomatognathic system in children. The etiology of these birth defects is multifactorial, and single nucleotide polymorphisms (SNPs) in IRF6 and FGF1 have been associated with NSCL/P. This study aimed to evaluate whether SNPs in IRF6, namely rs2013162, rs642961, rs2235373, and rs34010 in FGF1, are associated with NSCL/P occurrence in the Polish population. The study included 627 participants: 209 children with NSCL/P and 418 healthy controls. DNA was isolated from saliva in the study group and from umbilical cord blood in controls. Genotyping of polymorphisms was performed using quantitative PCR. There was no statistically significant association of IRF6 gene variants with NSCL/P occurrence, although for rs2013162, AA genotype, odds ratio (OR) = 1.16 and for AC genotype, OR = 0.83; for rs642961, AA genotype, OR = 0.84 and for AG genotype, OR = 1.41; and for rs2235373, AA genotype, OR = 0.79 and for AG, OR = 0.85. In the instance of rs34010 polymorphism in FGF1, the presence of the AA genotype was statistically significant in reducing the risk of NSCL/P (OR = 0.31, p = 0.001). Genetic variation in FGF1 is an important risk marker of NSCL/P in the Polish population, which cannot be stated for the polymorphisms in the IRF6 gene.

(1) Background: A free gingival graft (FGG) is a common technique used to reconstruct or enhance the area of keratinized mucosa, while a connective tissue graft (CTG) is utilized to boost soft tissue thickness, thereby promoting stability in interproximal marginal bone levels. Most reported complications following FGG procedure are associated with the donor site. In addition to a painful, open wound in the palate, the most frequent complications linked to FGG harvesting include excessive bleeding, postoperative bone exposure, and recurrent herpes lesions. Numerous methods for securing the donor site after a free gingival graft surgery have been documented in research publications. The main objective of this systematic review was to assess various techniques for protecting the palate after graft harvesting and their impact on patient experience, with a focus on pain management. The secondary objective was to evaluate these techniques in relation to donor site wound healing. (2) Methods: The search was performed across four databases: Medline (PubMed Central), Scopus, Web of Science, and Embase, in accordance with PRISMA guidelines and the recommendations set forth in the Cochrane Handbook for Systematic Reviews of Interventions. The initial search took place on 9 October 2023, followed by an update on 28 June 2024. The search utilized the following keywords: ("wound" OR "injury") AND ("graft" OR "free gingival graft" OR "graft harvesting") AND ("healing" OR "recovery") AND "palate". (3) Results: After conducting the follow-up search, a total of 958 papers were identified: 193 from PubMed, 314 from Scopus, 101 from Web of Science, and 350 from Embase. Ultimately, of the 49 papers that remained, 11 were excluded due to not fulfilling the inclusion criteria, leaving 38 full-text papers on free gingival grafts (FGG) for qualitative analysis. (4) Conclusions: Various methods for palatal protection after free gingival grafts (FGG) are described in the literature, stemming from biological, physical, or chemical sources. Most studies in this review examined platelet-rich fibrin and suggested that it provides no benefits for patients' subjective experiences or wound healing outcomes. While photobiomodulation appears to support wound epithelialization, it does not influence pain perception. Alternatives such as propolis, hyaluronic acid, and medicinal plant extracts show potential for palatal protection; however, further research is needed to thoroughly evaluate their effectiveness.

Background/objectives: To assess the impact of a vendor-agnostic deep learning model (DLM) on image quality parameters and noise reduction in dental cone-beam computed tomography (CBCT) reconstructions., Methods: This retrospective study was conducted on CBCT scans of 93 patients (41 males and 52 females, mean age 41.2 years, SD 15.8 years) from a single center using the inclusion criteria of standard radiation dose protocol images. Objective and subjective image quality was assessed in three predefined landmarks through contrast-to-noise ratio (CNR) measurements and visual assessment using a 5-point scale by three experienced readers. The inter-reader reliability and repeatability were calculated., Results: Eighty patients (30 males and 50 females; mean age 41.5 years, SD 15.94 years) were included in this study. The CNR in DLM reconstructions was significantly greater than in native reconstructions, and the mean CNR in regions of interest 1-3 (ROI1-3) in DLM images was 11.12 ± 9.29, while in the case of native reconstructions, it was 7.64 ± 4.33 ( p < 0.001). The noise level in native reconstructions was significantly higher than in the DLM reconstructions, and the mean noise level in ROI1-3 in native images was 45.83 ± 25.89, while in the case of DLM reconstructions, it was 35.61 ± 24.28 ( p < 0.05). Subjective image quality assessment revealed no statistically significant differences between native and DLM reconstructions., Conclusions: The use of deep learning-based image reconstruction algorithms for CBCT imaging of the oral cavity can improve image quality by enhancing the CNR and lowering the noise.

Background : Cephalometric studies indicate that craniofacial morphology in patients with cleft palate only (CPO) differs from other forms of orofacial clefts and healthy patients. Planning orthodontic treatment for patients with different craniofacial deformities requires knowledge on the craniofacial complex. The aim of the present study was to describe the cephalometric craniofacial morphology in adolescents with cleft palate only compared to generally healthy orthodontic patients. Methods: The study comprised 100 lateral cephalograms (taken in the years 2003-2020) of Polish patients with cleft palate only aged from 11.1 to 14.2 (mean age 12.43 y) and a matched control group of 100 children without orofacial clefts aged 12-14 (mean age 12.25). All digital images were analyzed in specialized cephalometric software. Results : Statistically significantly lower values of both SNA ( p < 0.001) and ANB ( p < 0.001) were found in the study group versus the control group. Mandibular line to cranial base angle (ML-NSL) as well as maxillary base to cranial base (NL-NSL) were significantly higher in the CPO group. Both the maxilla and mandible were rotated distally in CPO. Moreover, the intermaxillary vertical angle (ML-NL) was reduced in CPO. Mandibular angle in CPO was significantly higher ( p = 0.005), reflecting posterior mandibular rotation. Conclusions : In adolescents with CPO, maxillary deficiency is found, without a severe sagittal jaw discrepancy, with a slight compensatory lingual inclination of the lower incisors. Mandibular deficiency in CPO is concurrent with posterior rotation and an increased mandibular angle.

Background: Despite the large variety of retainer wires available, no studies could be found comparing the micromechanical properties and surface roughness of different retainer wires. Such characteristics affect the survival of the fixed retainer in terms of both fracture resistance and resistance to debonding from the tooth. Therefore, the aim of the present study was to examine and compare those characteristics in popular retainer wires., Methods: six different popular orthodontic retainer wires were subjected to instrumental indentation based on the Oliver and Pharr method. The geometric surface structure was analysed using a non-contact profilometer., Results: stainless steel wires had a higher hardness and a higher elastic modulus compared to titanium wires and white gold chain. The titanium wire and the white gold chain showed much more roughness than other wires., Conclusions: stainless steel wires are the most resistant, considering both the shape retention capacity and the ability to resist abrasive wear. The titanium wire showed the lowest hardness and, thus, the highest susceptibility to deformation. Bond-a-braid, Retainium and Orthoflex white gold are more resistant to fracture than other steel wires. Titanium wire and chain retainer wires have more roughness, which is a great advantage in terms of mechanical adhesion to composite materials.

Background/Objectives: To systematically review and summarize the existing scientific evidence on the diagnostic performance of artificial intelligence (AI) in assessing cervical vertebral maturation (CVM). This review aimed to evaluate the accuracy and reliability of AI algorithms in comparison to those of experienced clinicians. Methods: Comprehensive searches were conducted across multiple databases, including PubMed, Scopus, Web of Science, and Embase, using a combination of Boolean operators and MeSH terms. The inclusion criteria were cross-sectional studies with neural network research, reporting diagnostic accuracy, and involving human subjects. Data extraction and quality assessment were performed independently by two reviewers, with a third reviewer resolving any disagreements. The Quality Assessment of Diagnostic Accuracy Studies (QUADAS)-2 tool was used for bias assessment. Results: Eighteen studies met the inclusion criteria, predominantly employing supervised learning techniques, especially convolutional neural networks (CNNs). The diagnostic accuracy of AI models for CVM assessment varied widely, ranging from 57% to 95%. The factors influencing accuracy included the type of AI model, training data, and study methods. Geographic concentration and variability in the experience of radiograph readers also impacted the results. Conclusions: AI has considerable potential for enhancing the accuracy and reliability of CVM assessments in orthodontics. However, the variability in AI performance and the limited number of high-quality studies suggest the need for further research.

Background: Cephalometric analysis (CA) is an indispensable diagnostic tool in orthodontics for treatment planning and outcome assessment. Manual CA is time-consuming and prone to variability. Methods: This study aims to compare the accuracy and repeatability of CA results among three commercial AI-driven programs: CephX, WebCeph, and AudaxCeph. This study involved a retrospective analysis of lateral cephalograms from a single orthodontic center. Automated CA was performed using the AI programs, focusing on common parameters defined by Downs, Ricketts, and Steiner. Repeatability was tested through 50 randomly reanalyzed cases by each software. Statistical analyses included intraclass correlation coefficients (ICC3) for agreement and the Friedman test for concordance. Results: One hundred twenty-four cephalograms were analyzed. High agreement between the AI systems was noted for most parameters (ICC3 > 0.9). Notable differences were found in the measurements of angle convexity and the occlusal plane, where discrepancies suggested different methodologies among the programs. Some analyses presented high variability in the results, indicating errors. Repeatability analysis revealed perfect agreement within each program. Conclusions: AI-driven cephalometric analysis tools demonstrate a high potential for reliable and efficient orthodontic assessments, with substantial agreement in repeated analyses. Despite this, the observed discrepancies and high variability in part of analyses underscore the need for standardization across AI platforms and the critical evaluation of automated results by clinicians, particularly in parameters with significant treatment implications., Competing Interests: The authors declare no conflicts of interest.

The aim of the present study was to analyze the association of the TLR2 (Toll-like receptor 2 gene) 2258G>A (rs5743708), TLR4 (Toll-like receptor 4 gene) 896A>G (rs4986790), and TLR4 1196C>T (rs4986791) polymorphisms with dental caries in Polish children. The participants, 261 15-year-old children, were divided into two groups: 82 cases (i.e., children with DMFT (Decayed, Missing, and Filled Teeth) index >5, having either moderate or high caries experience, assigned as the "higher" caries experience group) and 179 controls (i.e., children with DMFT ≤ 5, having either low or very low caries experience, assigned as the "lower" caries experience group). Genomic DNA was isolated from buccal swabs, and genotyping was determined by means of real-time PCR (polymerase chain reaction). There were no significant differences in the genotype or allele distributions in all tested SNPs (single nucleotide polymorphisms) between children with "higher" caries experience and those with "lower" caries experience. TLR4 haplotype frequencies did not differ significantly between cases and controls. In an additional analysis with another case definition applied (subjects with DMFT ≥ 1 were assigned as "cases", whereas children with DMFT = 0 were assigned as "controls"), no significant differences in the TLR2 and TLR4 genotype, allele frequencies, and TLR4 haplotype frequencies were found between the case and the control groups. The results of the present study broaden our knowledge on the potential genetic factors that might affect caries risk and suggest that TLR2 rs5743708 and TLR4 rs4986790 and rs4986791 SNPs are not associated with dental caries susceptibility in Polish children.

Background/Objectives : Implant treatment in patients who require teeth extraction due to periodontitis presents a significant challenge. The consideration of peri-implantitis is crucial when planning the placement of dental implants. The predictability of implant treatment relies on the suitability of both hard and soft tissue quality. The aim of this article is to present a case report demonstrating a secure treatment protocol for implant procedures in patients with periodontitis requiring the extraction of all teeth, soft tissue management targeted at increasing the keratinized mucosa zone, and the provision of a reliable prosthetic solution. The secondary objective is to review the relevant literature regarding the significance of keratinized mucosa surrounding dental implants and its association with the occurrence of peri-implantitis. Case presentation : A 65-year-old female with generalized periodontitis, stage IV grade C and very poor oral hygiene came for treatment and rehabilitation of the lower jaw. CBCT revealed periodontal lesions and labio-lingual ridge dimensions in the region of teeth 34-44 from 8.0 to 10.2 mm. The first surgery included teeth extraction and periodontal lesions enucleation with simultaneous placement of four implants in the positions of teeth 32, 34, 42, 44. The second-stage surgery involved increasing the keratinized mucosa using two free gingival grafts. Conclusions : The present case report described the treatment process of the patient with periodontitis, including immediate implantation in the infected region, soft tissue augmentation using free gingival grafts and the ultimate placement of a bar-retained overdenture for final restoration. After two years of observation, despite questionable hygiene, no symptoms of gingival inflammation were detected. Furthermore, there is limited information in the literature regarding the correlation between inadequate keratinized gingiva and the occurrence of peri-implantitis., Competing Interests: The authors declare no conflicts of interest.

Background/Objectives : Periapical lesions (PLs) are frequently detected in dental radiology. Accurate diagnosis of these lesions is essential for proper treatment planning. Imaging techniques such as orthopantomogram (OPG) and cone-beam CT (CBCT) imaging are used to identify PLs. The aim of this study was to assess the diagnostic accuracy of artificial intelligence (AI) software Diagnocat for PL detection in OPG and CBCT images. Methods : The study included 49 patients, totaling 1223 teeth. Both OPG and CBCT images were analyzed by AI software and by three experienced clinicians. All the images were obtained in one patient cohort, and findings were compared to the consensus of human readers using CBCT. The AI's diagnostic accuracy was compared to a reference method, calculating sensitivity, specificity, accuracy, positive predictive value (PPV), negative predictive value (NPV), and F1 score. Results : The AI's sensitivity for OPG images was 33.33% with an F1 score of 32.73%. For CBCT images, the AI's sensitivity was 77.78% with an F1 score of 84.00%. The AI's specificity was over 98% for both OPG and CBCT images. Conclusions : The AI demonstrated high sensitivity and high specificity in detecting PLs in CBCT images but lower sensitivity in OPG images.

(1) Background. The aim of the present protocol is to assess whether self-perception of tooth colour and facial attractiveness correlates with gender and mood state. (2) Study protocol. The protocol foresees a cross-sectional clinical study, developed by Sapienza University of Rome, Italy, Department of Oral and MaxilloFacial Sciences, and 15 UNID (Unione Nazionale Igienisti Dentali-National Union of Dental Hygienists)-affiliated clinical centers in Italy. The protocol consists of a clinical visit, during which photographic documentation of the face and smile is collected with spectrophotometric evaluation of tooth colour. During the visit, two validated questionnaires are filled in. The first one is filled by the operator for the collection of data on: i) patient's face and smile colorimetric characteristics; ii) patient's and operator's evaluations of the dental colour and smile attractiveness. The second one is completed by the patient for the assessment of his/her mood state. (3) Conclusions. This protocol highlights the importance in aesthetic dentistry of a gender-specific approach and the limitations of gender-neutral models, revealing the existing gender differences in aesthetic self-perception. In addition, the colour-matching relationships between facial and dental colour characteristics will be explored. This approach improves the accuracy and personalization of aesthetic assessments in dentistry, by addressing personalized and gender-specific needs. A gender-inclusive methodology that takes a more nuanced and culturally aware approach to aesthetic dentistry is a useful adjunct to modern clinical practices.

Background: Temporomandibular joint disorder (TMD) is a common medical condition. Cone beam computed tomography (CBCT) is effective in assessing TMD-related bone changes, but image noise may impair diagnosis. Emerging deep learning reconstruction algorithms (DLRs) could minimize noise and improve CBCT image clarity. This study compares standard and deep learning-enhanced CBCT images for image quality in detecting osteoarthritis-related degeneration in TMJs (temporomandibular joints). This study analyzed CBCT images of patients with suspected temporomandibular joint degenerative joint disease (TMJ DJD). Methods: The DLM reconstructions were performed with ClariCT.AI software. Image quality was evaluated objectively via CNR in target areas and subjectively by two experts using a five-point scale. Both readers also assessed TMJ DJD lesions. The study involved 50 patients with a mean age of 28.29 years. Results: Objective analysis revealed a significantly better image quality in DLM reconstructions (CNR levels; p < 0.001). Subjective assessment showed high inter-reader agreement (κ = 0.805) but no significant difference in image quality between the reconstruction types ( p = 0.055). Lesion counts were not significantly correlated with the reconstruction type ( p > 0.05). Conclusions: The analyzed DLM reconstruction notably enhanced the objective image quality in TMJ CBCT images but did not significantly alter the subjective quality or DJD lesion diagnosis. However, the readers favored DLM images, indicating the potential for better TMD diagnosis with CBCT, meriting more study.

Background: Patients experiencing any malocclusion, may desire for treatment. However, there is no scientific information orthodontic treatment demand and the knowledge of young adults about orthodontic treatment. The aim of the study was to assess orthodontic treatment demand in young adults from Poland and Chile, their previous orthodontic experience and their knowledge on fixed and aligner orthodontic treatment., Methods: The target group comprised people aged 18-30. The sample size was estimated as above 400 for each country. The survey was carried out in Polish and Spanish within 3 months and consisted of 25 questions delivered via social media. Comparisons were made between countries, age subgroups and gender., Results: The response rate was 1,99%, what stands for 1092 responses, 670 from Chile and 422 from Poland, respectively. The percentage of young adults who were already treated was 42,9% in Poland and 25,0% in Chile. The ones planning to have orthodontic treatment within a year counted for 11,8% in Poland and 5,3% in Chile. Most young adults who want to be treated (20,6%) rely on doctor's recommendation on type of appliance while 14,7% of all respondents are interested solely in aligners. Most respondents have heard about aligners (58%). Direct provider-to-customer service without a doctor is not acceptable, neither in Poland (85,1%) nor in Chile (64,8%). Most young adults provided incorrect answers referring various aspects of aligner treatment., Conclusions: In both countries, patients demand to be treated and monitored by the orthodontist. A high percentage of patients want to be treated exclusively with aligners. Direct-to-consumer orthodontics does not seem attractive to patients. Young adults do not have adequate knowledge referring to aligner treatment. Many people want to be treated despite a previous orthodontic treatment., (© 2024. The Author(s).)

Background: No systematic review or meta-analysis has been identified that provides a clinician's perspective on the shade selection process for ceramic restorations. The aim of the present systematic review is to find and systematize the available knowledge by referring to the methods to assess the color of dental ceramics., Methods: The final search was performed on 10 December 2023 in six search engines. The keywords used in the search strategy were as follows: ("color matching" OR "shade matching" OR "color measurement" AND "porcelain" OR "dental ceramics") AND "dentistry" AND "accuracy"., Results: The search strategy identified 139 potential articles. After the screening process, sixteen articles were included in the review., Conclusions: In conclusion, the most common method, the visual method, has lower accuracy and repeatability. Devices like spectrophotometers and colorimeters provide precise, repeatable, and objective measurements, but fail to be widely applied in everyday clinical practice. Clinicians should not rely solely on their senses for shade determination, but should turn to quantitative methods. Colorimetric devices connected to mobile applications are an interesting and useful tool. Software and apps based on artificial intelligence are emerging as promising tools, but they require further research.

Background: Molar incisor hypomineralization (MIH) is a qualitative, demarcated enamel defect of hypomineralization affecting one to four first permanent molars, often with incisor involvement. Its etiology is complex. However, evidence suggests the influence of genetic factors, potentially including the single nucleotide polymorphisms (SNPs) rs2889956, rs4811117 and rs13058467, which were previously linked to MIH in a genome-wide association study of German children. The aim was to replicate analyses of possible associations between the SNPs and molar incisor hypomineralization in Polish children., Methods: The final study group consisted of 778 children aged 126-168 months old. Saliva samples were taken, and genomic DNA was extracted and genotyped using beadchip microarrays., Results: Among the 778 subjects, there were 68 (8.7%) subjects with MIH and 710 (91.3%) subjects without MIH. There were no significant differences in distributions in age, sex, or the frequency of caries in permanent dentition between the MIH and non-MIH groups. The rs2889956, rs4811117, and rs13058467 genotype distributions in the studied group conformed to the expected Hardy-Weinberg equilibria, and there were no significant differences in the distributions of their alleles or genotypes between the MIH and non-MIH groups., Conclusion: Our replication study did not confirm highly significant associations between the single nucleotide polymorphisms rs2889956, rs4811117, and rs13058467 with molar incisor hypomineralization in Polish children.

Introduction: This study performed a 3-dimensional analysis of tooth movement during orthodontic retention to assess the effectiveness of double retention (fixed and removable) in preventing undesired tooth movement., Methods: One hundred randomly selected patients were included at the initiation of double orthodontic retention with fixed retainers and vacuum-formed splints (recommended to be worn 22 h/d) in both arches. Intraoral scans were performed directly (T0), 1 month (n = 88), 3 months (T2) (n = 78), and 6 months (T3) (n = 66) after retainer bonding. Nine reference points were marked on each tooth in every patient. Subsequent scans were superimposed, and point displacement was calculated. Statistical analysis was performed using the R statistical software (version 4.2.2; R Core Team, Vienna, Austria)., Results: Sample size calculation determined at least 55 patients were needed. The total dropout between T0 and T3 was 34 patients (did not show up for appointment). The median absolute displacement value of a single point between T0 and T3 was 0.015 mm. The most stable teeth were mandibular central incisors, whereas the least stable were mandibular molars. Most tooth displacements occurred between T0 and T2, then slowed down significantly., Conclusions: Double orthodontic retention prevents major tooth displacements in most patients during the first 6 months of retention; however, larger, unpredictable single-tooth displacement may occur in individual patients., (Copyright © 2023 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.)

The development of a substance use disorder (SUD) is a multifaceted process influenced by both genetic and environmental factors. Recent research has suggested the potential involvement of the HINT1 gene in various aspects of plasticity, mood regulation, anxiety-like behaviour, and stress-coping mechanisms. Moreover, personality traits are also recognised to be instrumental in developing substance dependency. Given these considerations, our study investigated the associations among cigarette smoking, personality traits, and the rs2526303 polymorphism. Additionally, we investigated the interactions between personality traits and rs2526303 in the HINT1 gene. The study group comprised 531 volunteers: 375 cigarette users (mean age = 29.42 ± 10.72; F = 49%, M = 51%) and 156 never-smokers (mean age = 26.93 ± 10.09; F = 79%, M = 21%). Genotyping was conducted using the real-time PCR method, and the NEO Five-Factor Personality Inventory and State-Trait Anxiety Inventory were administered. There were no statistically significant differences in the frequency of rs2526303 genotypes and alleles in the cigarette user group compared to the control group. Compared to the control group, the cigarette users obtained higher scores in the assessment of the NEO-FFI Extraversion scale and lower results for the NEO-FFI Openness, Agreeableness, and Conscientiousness scales. Additionally, there was a statistically significant effect of rs2526303 genotype interaction and cigarette-using status on the conscientiousness scale. These outcomes collectively suggest a notable association between cigarette smoking and specific dimensions of personality, particularly highlighting differences in extraversion, openness, agreeableness, and conscientiousness. Furthermore, the detected interaction effect involving rs2526303 concerning conscientiousness signifies a complex interplay between genetic factors and smoking behaviour.

Objectives: To compare artificial intelligence (AI)-driven web-based platform and manual measurements for analysing facial asymmetry in craniofacial CT examinations., Methods: The study included 95 craniofacial CT scans from patients aged 18-30 years. The degree of asymmetry was measured based on AI platform-predefined anatomical landmarks: sella (S), condylion (Co), anterior nasal spine (ANS), and menton (Me). The concordance between the results of automatic asymmetry reports and manual linear 3D measurements was calculated. The asymmetry rate (AR) indicator was determined for both automatic and manual measurements, and the concordance between them was calculated. The repeatability of manual measurements in 20 randomly selected subjects was assessed. The concordance of measurements of quantitative variables was assessed with interclass correlation coefficient (ICC) according to the Shrout and Fleiss classification., Results: Erroneous AI tracings were found in 16.8% of cases, reducing the analysed cases to 79. The agreement between automatic and manual asymmetry measurements was very low (ICC < 0.3). A lack of agreement between AI and manual AR analysis (ICC type 3 = 0) was found. The repeatability of manual measurements and AR calculations showed excellent correlation (ICC type 2 > 0.947)., Conclusions: The results indicate that the rate of tracing errors and lack of agreement with manual AR analysis make it impossible to use the tested AI platform to assess the degree of facial asymmetry., (© The Author(s) 2023. Published by Oxford University Press on behalf of the British Institute of Radiology and the International Association of Dentomaxillofacial Radiology.)

The advent of artificial intelligence (AI) in medicine has transformed various medical specialties, including orthodontics. AI has shown promising results in enhancing the accuracy of diagnoses, treatment planning, and predicting treatment outcomes. Its usage in orthodontic practices worldwide has increased with the availability of various AI applications and tools. This review explores the principles of AI, its applications in orthodontics, and its implementation in clinical practice. A comprehensive literature review was conducted, focusing on AI applications in dental diagnostics, cephalometric evaluation, skeletal age determination, temporomandibular joint (TMJ) evaluation, decision making, and patient telemonitoring. Due to study heterogeneity, no meta-analysis was possible. AI has demonstrated high efficacy in all these areas, but variations in performance and the need for manual supervision suggest caution in clinical settings. The complexity and unpredictability of AI algorithms call for cautious implementation and regular manual validation. Continuous AI learning, proper governance, and addressing privacy and ethical concerns are crucial for successful integration into orthodontic practice.

(1) Background: The incidence of ankyloglossia is 0.02-10.7%. Its effect on selected dysfunctions has been described; however, no studies report its impact on several disorders in a group of subjects. The aim of this study was to assess the effect of ankyloglossia on swallowing, speech, occlusion and periodontium. (2) Methods: The study group consisted of 86 patients with ankyloglossia, and the control group (n = 86) had a normal tongue frenulum. Type of swallowing, tongue mobility, speech, occlusion and periodontium were assessed. (3) Results: Ankyloglossia pertained to 75.6% patients with infantile swallowing and 41.3% patients with mature swallowing. Limited tongue mobility was found in 29.4% subjects with moderate ankyloglossia and 70.6% subjects with severe ankyloglossia. All subjects with mild ankyloglossia and all the controls had normal tongue mobility. The relationship between dysglossia and ankyloglossia severity was statistically significant. Malocclusion or crowding was diagnosed in 62% subjects with ankyloglossia and 21.6% subjects in the control group. No periodontal abnormalities were found in any subject. (4) Conclusions: (1) A short tongue frenulum negatively influences swallowing and is associated with an "infantile swallowing pattern". (2) Moderate or severe ankyloglossia significantly limits tongue mobility. (3) A short tongue frenulum negatively influences speech. (4) Ankyloglossia is associated with higher prevalence of malocclusion.

The nasal septum is believed to play a crucial role in the development of the craniofacial skeleton. Nasal septum deviation (NSD) is a common condition, affecting 18-65% of individuals. This study aimed to assess the prevalence of NSD and its potential association with abnormalities detected through cephalometric analysis using artificial intelligence (AI) algorithms. The study included CT scans of 120 consecutive, post-traumatic patients aged 18-30. Cephalometric analysis was performed using an AI web-based software, CephX. The automatic analysis comprised all the available cephalometric analyses. NSD was assessed using two methods: maximum deviation from an ideal non-deviated septum and septal deviation angle (SDA). The concordance of repeated manual measurements and automatic analyses was assessed. Of the 120 cases, 90 met the inclusion criteria. The AI-based cephalometric analysis provided comprehensive reports with over 100 measurements. Only the hinge axis angle (HAA) and SDA showed significant ( p = 0.039) negative correlations. The rest of the cephalometric analyses showed no correlation with the NSD indicators. The analysis of the agreement between repeated manual measurements and automatic analyses showed good-to-excellent concordance, except in the case of two angular measurements: LI-N-B and Pr-N-A. The CephX AI platform showed high repeatability in automatic cephalometric analyses, demonstrating the reliability of the AI model for most cephalometric analyses.

Sella turcica abnormalities were reported in malocclusions and clefts. No studies were found on sella turcica abnormalities in CPO patients. This study aimed to compare the prevalence of sella turcica abnormalities on cephalometric radiographs in CPO versus non-cleft orthodontic patients. Cephalograms of CPO patients ( n = 89) and controls ( n = 89) were analyzed for normal sella turcicae and sella turcica abnormalities. Then, cephalometric analysis was performed using specialized software. Statistical analysis was performed using the Rv.4.1.1 package. No variation in or anomaly of the sella turcica was more frequent in CPO compared to non-cleft individuals. Patients with hypertrophic posterior clinoid process had higher interincisal and 1+:Nasion-A angles. Subjects with hypertrophic posterior clinoid process and double contour of the floor had higher Sella-Nasion-A, Sella-Nasion-B and Sella-Nasion-Pogonion and lower ANB. A pyramidal shape of the dorsum sellae was more prevalent in males, as was double contour of the floor in females. Subjects with an oblique anterior wall had lower SNB, GntgoAr and NLA. Subjects with a normal sella had higher SNPg, ML-NSL and 1+:NAmm. A normal sella was more prevalent in younger patients. CPO is not associated with sella turcica abnormalities compared to non-cleft orthodontic patients.

Orofacial clefts are common birth defects that affect the morphology of the skull. Cleft palate only (CPO) has a different etiology than other types of clefts, and craniofacial morphology in CPO differs from that of UCLP and BCLP. The long-term effect of the cleft and its surgery is visible after growth cessation. However, few studies exist describing cephalometric craniofacial morphology in adults with CPO. The aim of the present study was to describe the cephalometric craniofacial morphology of adult patients with CPO compared to healthy patients. The study included analysis of cephalometric lateral headfilms of 28 adults with CPO and 28 healthy subjects. It was found that the angles of SNA, ANB, 1-:NB angle (°) and Wits appraisal were significantly smaller in CPO, whereas NL-NSL (°), 1+:NA angle (°) and 1+:NA (mm) had significantly higher values in CPO compared to the control group. It has been concluded that CPO in adult patients is characterized by a sagittal jaw discrepancy due to maxillary deficiency, with a tendency for compensatory inclination of the upper and lower incisors.

Background: In recent years the burden of aligner treatment has been growing. However, the sole use of aligners is characterized by limitations; thus attachments are bonded to the teeth to improve aligner retention and tooth movement. Nevertheless, it is often still a challenge to clinically achieve the planned movement. Thus, the aim of this study is to discuss the evidence of the shape, placement and bonding of composite attachments., Methods: A query was carried out in six databases on 10 December 2022 using the search string ("orthodontics" OR "malocclusion" OR "Tooth movement techniques AND ("aligner*" OR "thermoformed splints" OR "invisible splint*" AND ("attachment*" OR "accessor*" OR "auxill*" AND "position*")., Results: There were 209 potential articles identified. Finally, twenty-six articles were included. Four referred to attachment bonding, and twenty-two comprised the influence of composite attachment on movement efficacy. Quality assessment tools were used according to the study type., Conclusions: The use of attachments significantly improves the expression of orthodontic movement and aligner retention. It is possible to indicate sites on the teeth where attachments have a better effect on tooth movement and to assess which attachments facilitate movement. The research received no external funding. The PROSPERO database number is CRD42022383276.

(1) Background: To assess the clinical safety and efficacy of a new piezoelectric instrument for orthodontic clean-up; (2) Methods: An in-vitro comparative study on 75 teeth extracted for orthodontic reasons compared the tested method (Treatment 1) with two other procedures: One step finisher and polisher (Inverted cone One gloss Shofu Dental, Kyoto, Japan) (Treatment 2) and twelve-fluted tungsten carbide bur (123-603-00, Dentaurum, Pforzheim, Germany) and Sof-Lex discs Pop-On XT Kit (3M ESPE) (Treatment 3), with n:25 samples in each group. Clinical safety (enamel volume loss) and effectiveness (residual adhesive volume) were assessed using the structured light 3D scanner Atos Compact Scan (GOM GmbH) together with the support of Atos Professional software. The surfaces were scanned three times to assess: (i) the volume of the residual adhesive (RAV) after bracket removal; (ii) the volume of the relative residual adhesive ( dAV ) after the clean-up procedure; (iii) volume of the enamel loss (EVL); (3) Results: The mean RAV (mm 3 ) was 0.239 ± 0.337; 0.069 ± 0.124, 0.120 ± 0.193 and the mean EVL (mm 3 ) was 0.1870 ± 0.177, 0.187 ± 0.299 and 0.290 ± 0.205, for treatment 1, 2 and 3, respectively. The distribution was asymmetrical between groups in both cases; (4) Conclusions: The tested instrument proved to be effective and safe for post-orthodontic clean-up. With the increasing use of invisible aligners, the possibility of using an ergonomic and fast instrument is of benefit to both patient and practitioner.

Objective: The objective of this study was to evaluate the prevalence of carotid artery calcifications (CACs) on panoramic radiographs of Polish dental patients., Methods: Panoramic radiographs made between 2005 and 2012 in 4000 patients born between 1922 and 1958 were accessed from the server of the Department of Radiology and analyzed for the presence or absence of CACs by a group of trained dentists., Results: The anatomical area covered by the analysis was visible in 2189 images (54.73%). Calcifications in the carotid arteries were found in 468 (21.68%) patients, including 327 (14.94%) unilaterally and 141 (6.44%) bilaterally. CACs were found in 284 (60.68%) women and 184 (39.32%) men., Conclusions: The prevalence rate of CACs detected on panoramic radiographs in patients aged 54 and older was 21.68%, which makes it an important clinical problem.

Background: Cleft palate only (CPO) is the second most prevalent cleft type. Both the cleft and palatal scarring may affect craniofacial growth. The aim of this systematic review was to summarize scientific evidence on effect of palatal surgery on craniofacial morphology in CPO., Methods: A search was conducted in PubMed, PMC, WoS, Scopus, Embase, using the keywords: "cleft palate" AND ("craniofacial morphology" OR "cephalometric analysis") NOT "lip" with inclusion and exclusion criteria ensuring confident, direct comparison between study groups. The quality assessment was performed with Arrive's scale for radiologic examinations., Results: Of 713 potential articles, 19 were subjected to qualitative analysis and 17 to meta-analysis, which confirmed reduced SNA in unoperated CPO versus non-cleft individuals. No scientific evidence was found directly assessing the effect of surgery on craniofacial morphology. The negative effect of palatal surgery was seen indirectly: in treated CPO versus non-cleft, the size effect of SNA is bigger than in untreated CPO versus non-cleft. A high heterogeneity came from a few non-European publications., Conclusions: CPO is associated with sagittal maxillary deficiency resulting both from the cleft and from primary surgery, disregarding cleft severity in operated CPO patients. Ethnic differences influence craniofacial morphology in CPO. This research received no external funding. Study protocol number in PROSPERO database: CRD42021268957.

Background: Clinical guidelines are lacking for the use of orthodontic mini-implants (OMIs) in terms of scientific evidence referring to the choice of proper mini-design. Thus, the present study aimed to investigate to what extent orthodontic mini-implant thread design influences its stability., Methods: Search was conducted in five search engines on 10 May. Quality assessment was performed using study type specific scales. Whenever possible, meta-analysis was performed., Results: The search strategy identified 118 potential articles. Twenty papers were subjected to qualitative analysis and data from 8 papers-to meta-analysis. Studies included were characterized by high or medium quality. Four studies were considered as low quality. No clinical studies considering the number of threads, threads depth, or TSF have been found in the literature., Conclusions: Minidesign of OMIs seems to influence their stability in the bone. Thread pitch seems to be of special importance for OMIs retention-the more dense thread-the better stability. Thread depth seems to be of low importance for OMIs stability. There is no clear scientific evidence for optimal thread shape factor. Studies present in the literature vary greatly in study design and results reporting. Research received no external funding. Study protocol number in PROSPERO database: CRD42022340970.

This randomized, parallel, controlled trial assessed the effect of fluoride varnish, ozone and octenidine on white spot lesions (WSLs) and caries during orthodontic treatment. Patients were enrolled between 1st September 2017 and 31st August 2020 at initiation of orthodontic treatment in Department of Interdisciplinary Dentistry Pomeranian Medical University in Szczecin, Poland. All participants were randomly assigned to four study and one control groups using number random generator. However, investigators were not blinded due to the nature of the study. Groups I, II, III, IV had professional cleaning and varnishing (5% NaF) every 4 weeks. Groups II and IV had in-office ozone therapy before varnishing, groups III and IV received domestic octenidine mouthrinse. Group K had no professional hygienic or prophylactic procedures. WSLs were assessed at T0 and then every 4 weeks (T1-T4) and caries-at T0 and T4. The specific objective was to assess the influence of fluoride varnish, ozone and octenidine on the incidence of white spot lesions and caries during orthodontic treatment. The primary outcome of this report was the highest number of WSLs in group K and the lowest percentage of patients with WSLs in group IV. Each group comprised 30 randomized participants; they were all analyzed. No WSLs were found at T0, but they were stated in all groups at T4. The numbers of patients with WSLs significantly increased between T0-T4 in groups I and K. Group IV had the lowest percentage of patients with WSLs in T1-T4. WSLs in group IV were found no earlier than at T2. Group K had the highest percentage of WSLs at T4: 26%. At T0 all the groups had DMFs above 0 with a significant increase at T4. No side effects of the introduced prophylaxis were observed in any group. Caries is an important problem of fixed orthodontic treatment. Even an extremely intensive prophylaxis could not completely prevent WSLs and caries. Simultaneous application of fluoride varnish, ozone gas exposure and octenidine appears to have a beneficial effect in limiting the development of WSLs.Trial registration: NCT04992481., (© 2022. The Author(s).)

Extremely Low-Frequency Electromagnetic Field (ELF MF) therapy is effective in the treatment of injury, inflammation and postoperative complications. Its clinical applications relate to bone unification, pain reduction, soft tissue oedema and the decrease of electric potentials in the oral cavity. It enhances regeneration of periapical bone lesions. It is obvious that cells (leukocytes, platelets, keratinocytes, osteoblasts) and proteins (fibrin, collagen, elastin and growth factors) exhibit alterations when exposed to an Extremely Low-Frequency Electromagnetic Field. The aim of the study was to evaluate the effect of an Extremely Low-Frequency Electromagnetic Field (ELF MF) on the parotid gland on the concentration of salivary immunoglobulin A. The study group consisted of 24 patients, aged 14-16, who underwent ELF MF on the parotid gland region. The control group comprised 25 matching persons. The IgA concentration in saliva samples was established using radial immunodiffusion. Following ELF MF, a statistically significant increase in the concentration of secretory immunoglobulin A was found in the study group, whereas in the control group, no statistically significant differences were noted. It can be concluded that an Extremely Low-Frequency Electromagnetic Field increases the activity of the immune system of the parotid gland.

Objective: To examine the association of four FCN1 SNPs: -542G>A (rs10120023), -144C>A (rs10117466), +6658C>T (rs148649884), and +7895A>G (rs150625869) with dental caries in Polish children., Subjects and Methods: The study group consisted of 261 15-year-old Polish teenagers: 82 children with "higher" caries experience (having Decayed Missing Filled Teeth, DMFT >5) and 179 children with "lower" caries experience (having DMFT ≤5). Moreover, in additional comparison, a group of 229 children with caries experience (DMFT ≥1) was compared to a caries-free (DMFT =0) group of 32 children. Extraction of genomic DNA was performed from buccal swabs, and genotyping was performed by Real-Time PCR., Results: FCN1 SNPs +6658C>T and +7895A>G appeared to be monomorphic in our sample. The genotype, allele, or haplotype distributions in FCN1 SNPs -542G>A and -144C>A in children with "higher" caries experience did not differ significantly from those in "lower" caries experience group. Similar results with no significant differences were demonstrated for subjects with DMFT ≥1 compared to subjects with DMFT =0., Conclusion: FCN1 SNPs are not the markers of dental caries susceptibility in Polish children., (© 2021 Wiley Periodicals LLC.)

(1) In recent years, there has been a significant increase in the availability of denture adhesives for stabilizing removable dentures. The aim of the present study was to assess the cytotoxicity of three denture adhesives on human fibroblasts. (2) Methods: Three denture adhesives were analyzed. Fibroblast cultures were established for the study and control groups in order to assess the incidence of necrosis and to evaluate the microscopic intracellular alterations induced. Following incubation with (study groups) or without adhesives (control group), trypan blue dye exclusion assay was used to determine the number of viable and/or dead cells. Microscopic specimens were stained with haematoxylin and eosin, scanned, digitally processed and then analyzed by a histopathologist. (3) Results: All three denture adhesives analyzed demonstrated various toxic effects in vitro on human fibroblast: quantitative evaluation-45.87-61.13% reduction of cell viability ( p = 0.0001) and slight to moderate cytotoxicity in qualitative evaluation. (4) Conclusions: Denture adhesive creams demonstrated a toxic effect on human fibroblasts in vitro in quantitative and qualitative evaluation. In vivo observations are needed to find out if denture adhesives present a cytotoxic effect in patients.

The aim of the study was to analyze retention protocols and materials for fixed retainers used by clinicians providing orthodontic treatment in Poland. The survey was carried out from February to April 2021. The questionnaire was designed using the Google Forms tool. After validation, the questionnaire was delivered to verified active orthodontists gathered in a closed social media group of 615 members. Finally, 104 answers were received. Answers to individual questions were provided in percentages and tabularized. A chi-squared test of proportion was used to compare: the proportion of clinicians using retainers of different characteristics and the proportions of clinicians indicating the superiority of a given clinical solution. Rectangular steel braided wire was rated as most reliable. However, doctors who declared to use gold chain were mostly solely using this type of wire. Multistranded round wire was rated the worst. Fiber-reinforced composite was mainly used in periodontal patients. The protocols used by Polish orthodontic practitioners relied on double long-term retention with regular follow-up. The most popular material was stainless steel braided rectangular wire bonded with a flowable composite. Most clinicians believed they could maintain the treatment results, but they declared that patients' cooperation was a challenge.

Background: This study aimed to determine the kinetic frictional force (FF) of the recently produced TiNbTaZrO (Gummetal) orthodontic wire and compare it to the widely used wires of stainless steel (SS), nickel-titanium (NiTi), cobalt-chromium (CoCr) and titanium-molybdenum (TiMo) alloys., Methods: Five types of 0.016″ × 0.022″ wires were ligated with elastic ligatures to 0.018″ × 0.025″ SS brackets. The dynamic FFs between the brackets and ligated wires were measured utilizing a specialized tensile tester machine. Prior sample sizes for different archwires were conducted using power analysis for the general linear models. The existence of significant differences in FF between examined materials was initially confirmed by the one-way analysis of variance (ANOVA) with further evidence of pairwise differences by Tukey's Honest Significant Difference test., Results: The pairwise differences between means of kinetic FFs for NiTi, CoCr, and Gummetal wires were not statistically significant (adjusted p -value > 0.05). Stainless steel alloy presented the lowest FF values significantly different from other groups (adjusted p -value < 0.05). On the contrary, TiMo wires showed significantly greater FFs (adjusted p -value < 0.05) than other alloys., Conclusions: Gummetal orthodontic wire exhibits similar frictional resistance as NiTi and CoCr wires. Bendable TiNbTaZrO wire might be used for sliding mechanics due to its favorable frictional properties.

The frequency of some sella turcica abnormalities on cephalometric radiographs is age related. Chronological age might not overlap with growth; however, no studies could be found on the association between sellar morphology and dental age. Although an association exists between sella turcica bridging and dental abnormalities, no studies have been found correlating sellar abnormalities other than bridging with dental abnormalities. The aim of this study was to find any correlations between sella turcica abnormalities and dental age or dental abnormalities., Methods: Lateral cephalograms and panoramic radiographs of 206 children aged 6-15 years were analyzed for sela turcica abnormalities, Demirijan dental age, and dental abnormalities., Results: The prevalence of dental abnormalities in patients with sela turcica abnormalities was 16.98%, while in those with normal sella, it was 3%. The differences between dental and chronological age were higher in patients with sella turcica abnormalities ( p = 0.002). Dental abnormalities were more prevalent ( p = 0.001) in patients with sellar abnormalities other than sellar bridging than in those with sellar bridging or normal sella., Conclusions: Sella turcica abnormalities are correlated with delayed dental age. Dental abnormalities are more frequent in patients with sellar abnormalities. Dental abnormalities are less frequent in subjects with sellar bridges compared to those with other sellar abnormalities.

Background: Orthodontic retention aims to maintain optimal teeth positions after active treatment. The stability is affected by numerous factors, including patients' individual features, thus retention should be adjusted in the most optimal way. Bonding a retainer makes retention less dependent on patient's compliance., Questions Arise: What wire or fiber splint type provides the best treatment stability? What materials should be used to bond the wire or fiber splint? Should be the bonding procedure be direct or indirect? The aim of the study is to assess and synthesize available controlled trials investigating failures of fixed retainers., Methods: Literature searches of free text and MeSH terms were performed in Scopus, Web of Science, Embase and PubMed Central in order to find studies, referring to failures of fixed retention (12th February 2021). The keywords were: ("orthodontic retainers AND failure AND wire"). The framework of this systematic review according to PICO was: Population: orthodontic patients; Intervention: fixed orthodontic retainer bonding; Comparison: Different protocols of fixed orthodontic retention applied; Outcomes: failure rate, survival rate. Three different specific scales from the Cochrane Collaboration Handbook were used, according to each study type. Additionally, a meta-analysis was conducted to compare the effectiveness of retention using fiber reinforced composite and multistranded steel wire., Results: The search identified 177 potential articles: 114 from PubMed, 41 from Scopus, 20 from Web of Science and 2 from Embase. After excluding studies inconsistent with selection criteria, 21 studies were included and subjected to qualitative analysis. The main outcome investigated was failure rate. This systematic review has some potential limitations due to the heterogeneity of design between included studies., Conclusions: No retainer is proved to guarantee a perfect stability of dental alignment. The retainer should be bonded to all adherent teeth, preferably with additional use of bonding resin. No wire or fiber splint present superior characteristics concerning failure rate. Fiber reinforced composite retention is more sensitive to operator skills, and with imperfect bonding technique, failure rate is much higher. During the first 6 months after bonding retainer the patient should be under frequent control. The study protocol was registered in PROSPERO database with the number CRD42021233406., (© 2021. The Author(s).)

Background: The definition of dental hypersensitivity is "pain derived from exposed dentin in response to chemical, thermal tactile or osmotic stimuli which cannot be explained as arising from any other dental defect or disease". One of the treatments proposed is tubular occlusion. The aim of this in vivo split-mouth randomized clinical trial was to evaluate the clinical efficacy of a in-office application of a fluoride varnish (Bifluorid 10) and a bonding resin (Futurabond U) in adults with dentin hypersensitivity., Material and Methods: A total of 180 teeth were treated with Bifluorid 10 and 160 with Futurabond U. Outcome measurements were taken one or two weeks before treatment, at baseline at the application days, at 1 week and at 1-6 months after first treatment., Results: Both treatments reduced pain intensity. Bifluorid 10 and Futurabond U have similar efficacy in reducing SCHIFF-measured pain reduction, while Bifluorid 10 is significantly more efficient for VAS-measured pain reduction, mainly due to long-term pain reduction. Patient age has a significant negative influence on pain reduction, while the influence of patient gender and BEWE of the tooth is insignificant., Conclusions: Bifluorid 10 and Futurabond U are effective in the treatment of dental hypersensitivity. The RCT was registered at the US National Institutes of Health (ClinicalTrials.gov) #NCT04813848.

(1) Background: Severe acute respiratory syndrome Coronavirus-2 (SARS-CoV-2) emerged in Wuhan, China, in late 2019. The development of effective and safe vaccines against SARS-CoV-2 has been extremely fast. The list of orofacial adverse effects of BNT162b2 and mRNA-1273 vaccines based on the clinical trials are reported to be rare. The aim of this study was to investigate the facial and oral manifestations of COVID-19 vaccination using a survey-based study. (2) Methods: The questionnaire was developed using Google Forms and sent anonymously to a total of 700 subjects (medical personnel) in Poland, Italy, and other EU countries. (3) Results: 223 people answered the questionnaire, mainly vaccinated with BNT162b2. Only 3.1% and 5.4% experienced oral and facial symptoms, respectively. General diseases presence and age have significant influence on the probability of oral symptoms occurrence after the second dose. Facial symptoms are correlated with general disease; autoimmune pathologies and age, at first and second dose, respectively. Gender, smoking and regular medication intake have significant influence on the probability of taking an absence day. Gender, age, and smoking have a significant influence on the duration of symptoms after second dose. (4) Conclusions: Based on the results of this preliminary survey, there is no observed significant correlation between vaccine administration for COVID-19 and facial and oral manifestations.